No Master Data Attributes Value Loaded

Hi
   I have a custom Master Data Info Object which gets it feed for a simple master data attribute data source.
    However none of the Master Data Attributes actually are populated though my request load is successful.
    I get 144913 records transferred but only 78596 added. Despite this I have not a single attributes value populated.
    Could the reason the data is dropping because I have 3 key fields in my datasource VIEW but only 1 Key defined in the Update Rule ? If yes, how can I change the Update Rule to include more Key Fields ?

Hi Chris
I request you to check the transforamtion between your data source and data target once again.
When loading to data target, according to your transformation only the records will be updated to your data target. But all the records will get populated.
Yes, Key fields are also one reason, if the duplicate rows being populated.
Compare your data target data & RSA3 Extractor checker.Whether the duplicate records being added together or not
Regards
Saravanan.ar

Similar Messages

Assign Master data Attribute value to PARENTH1

Dear All,
I have the requirement to load Employee master data from BI to BPC system using data manager package.
Dimension Name (BPC)            InfoObject Name(BI)
Employee                                      0EMPLOYEE
In Employee master data there is an Attribute, now need to assign this Attribute value to PARENTH1 in BPC.
Waiting for your valuable answers

Hi Edwin,
After making the changes as u suggested, i tried to activate the transfer rule, but Iam getting the following eerror msg
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        6,083
Message:    Statement is not accessible.
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
How can Iresolve this?/ Why is this happening??
DV
Any Help???
null

Assign master data attribute value to Time Infoobject in Transfer Rule Rout

Hi Experts,
I want to assign value for Time Infoobject ZTIME from a Master data Infoobject's attr. The value for this ZTIME exists as an attr of Infooject ZMMM. I want to do at Transfer Structure level so that the assigned value can be used for another calculation in the update rule..
Any help on the routine is highly appreciated.
Thanks,
DV

Hi Edwin,
After making the changes as u suggested, i tried to activate the transfer rule, but Iam getting the following eerror msg
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        6,083
Message:    Statement is not accessible.
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
How can Iresolve this?/ Why is this happening??
DV
Any Help???
null

How to convert unit of measures in bex on master data attribute values

Hi All,
i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there procedure in formula variable it self to convert unit of measure before replacing the values.....
or is there any other solution to this Problem...
Thanks in advance..
regards
ravi.p

Hi
Have you tried to create a variable for ths kf with exit. I thnk it is possible here
Assign points if useful
Regards
N Ganesh

HR Query using two diffferent master data attribute values

I have a requirement to calculate headount based on certain condition.
Example: The condition is as follows:
For each "Performace Rating" (ROW)
Count Headcount for "Below MIn" (COLUMN)
- Below Min = "Annual Salary" less than "Pay Grade Level MIn"
- "Annual Salary" and "Pay Grade Level" are attributes of "Employee" Master data and is of type CURR
-"Pay Grade Level Min" in turn is an attribute of "Pay Grade Level" master data.
I am trying to build this query based on a standard Infoset 0ECM_IS02 that has an ODS (Compensation Process), Employee and Person" .
Any help in the required approach is appreciated like creating a restricetd KF using ROWCOUNT (Number of Records) and implement the logic for "Below Min"
Thanks
Raj

Hi
Have you tried to create a variable for ths kf with exit. I thnk it is possible here
Assign points if useful
Regards
N Ganesh

Pupulating Char with Master data attribute

Hi,
I need to populate the characteristic with a master data attribute value at the tranfer rules.
Can anybody send me the code to do so.
If it is at Update rules we have the option of Master data attribute of.
But I need to do it at transfer rules.
Thanks in advance.

Hi Indira,
It is difficult to give the exact code but, here is the pseudo code:
In the start routine:
select * from /bic/m<characteristic>
into itab for all entries in datapak
where ..............
if sy-subrc = 0.
sort itab by....
endif.
In the mapping for the info object, create a routine and the following code goes in there:
read table itab with key ......
if sy-subrc = 0.
result = itab-********
endif.
Make sure you handle time dependencies if the master data attribute is time dependent.
Hope this helps.
Thanks and Regards
Subray Hegde

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

Process chain master data: attributes or Text load first?

Hello
I understand as attributes those characteristics defined as nav. attrib for a characteristic. For example I have char. material with attrib source, destine, manufacturer, country etc. So my understanding was first to load all text (code and description) for each one of the characteristics (inc. attributes) and later load properly for a material X all of its attribute values x1,x2,x3....
I am correct ?
becuase if I load first attributes as I understand them, maybe some codes that I update at posteriori will note have their attribute values loaded
Hope you understand what I mean
Looking forward your replies !
tia

thanks Udo
as of the sequence master first and transact after is clear but allow me to rephrase my question :
when I use a text datasource i will be filling code and descriptive for a characteristic so for my case material will have all codes and descriptives from R/3. (010 - winston, 020 - marlboro, 030 - camel)
The same for loading attributes master data (for me again text: code and descriptive). In my case lets say attribute is factory so will be 001 spain, 002 france, 003 USA, 004 Germany).
later when I use attribute datasources understand that will be loading for each of my products loaded in step 1 the respective values for their attributes. That is for product 010 load their factory lets say 002 ...
I am a beginner so please let me know if I am misunderstanding anything ?

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Where to set lock while loading master data attributes

Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.

Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks

To enhance 0EMPLOYEE master data attributes, need to delete and load again?

Dear Support,
In order to meet business intelligence demands, I had three more attributes (region, time rate and worksite) to 0employee time dependent characteristic. The datasource to load 0employee attributes and its structure were enhanced to fill the new fields.
After first load, 0employee master data could not be activated. So I deleted 0employee master data, what I couldnu2019t do without deleting its data from transactional HR infocubes. I deleted transactional data and afterwards master data. I load it again and activated, with no errors this time.
This occured in development system.
Changes are about to go to production environment and deleting almost all transactional RH area infocubes and 0employee master data is something that we all want to avoid.
I am asking if there is a workaround in order to solve this without doing the stated time and resources consuming task.
Thanks in advance for your help,
Best Regards,
André Oliveira

Hi Andre,
You should be able to do a full load to achieve this. No need to delete the data. If there are corrupt data in BI with overlapping time periods, fix it by maintaining the master data. If corrupt data comes from source fix it in PSA.
Also you can specify to load the data for a time range only which might be easier than to load all history.
good luck,
vijay

Cant fully load updated data to Master data attribute

Hi BW expert,
I meet an issue here, I am not able to load updated data to master data attribute. My loading selection is based on employee number range.
e.g employee number 00001 to 10000
However the data is successfully loaded to master data but lot of the attribute data are not updated. e.g 056, 057, 098, 0100.
I checked in PSA, there is no data updated for the attribute.
I checked in RSA3 in R/3, there are attribute data extracted.
Please advice, why attribute data is not updated when I load it in a range number. The attribute only work when I load one employee number.
Thanks.
regards,
Wesley Koo

check this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps..

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

No Master Data Attributes Value Loaded

Similar Messages

Maybe you are looking for