No Master Level slider in Transport Bar?

Hi,
I'm new to Logic, just bought Logic Studio and am now exploring Logic Pro 8, which, at first sight looks really nice (if compared to Pro Tools, which I used before).
Got a small question though.
Although I customized my transport bar to show the "Master Level" meter, it simply doesnt show up. I checked and unchecked the box, but nothing changes in my transport bar (whereas if I check or uncheck other boxes, buttons come and go in my transport bar)
This is, of course, not a big issue, but it seems quiet a handy feature to use and I was just wondering if this could be a bug or am I doing something wrong?
Thx!
Senne

It shows up here... bottom right hand side of the Transport bar.
It's 2 speaker icons, one on the left, one on the right, with a slider inbetween.
You're really not getting that when you select it?
It might be a good idea to trash preferences then...

Similar Messages

  • LE 8 Master Level Doesn't Work

    Hi. Can anyone tell me how to get my master level slider on the Transport Bar to work? Clicking the Dim button works, but moving the slider has no effect on the Master Level channel strip in the mixer and of course doesn't change the audio level. Neither does the right button which is supposed to set the level to 0db.

    Now this is new! When I click the Dim button, the Dim icon highlights, the level drops and the slider jumps to about 3/4 of the way to the end of the range of the slider. Then I move the slider and nothing changes aurally or in the Master Output Channel Strip. When I click the Dim button again ( to deselect it), the button un-highlights, the slider jumps back to the same 3/4 spot. Subsequent slider wiggling has no effect. Also, I've noticed that pressing the 0 db switch on the right has no effect on the Master Output switch, or the level of the signal, but it does cause the Master Level slider to move to that 3/4 spot. What's new is that rather than dimming to the level that I've set in Audio Prefs, the signal is apparently dropping by some set amount subtracted from what the Master Output is set at, ie, when MO slider is low, Dim switch drops the signal to an inaudible level, rather than what I've set in Prefs. What's up with that, do you suppose?
    Since I wrote the above, I went back and tried a blank template project file, and the slider works more like what you'd expect, except I was expecting the Master Output slider to actually move along with the Master Level slider in the Transport Bar, which it does not. In the blank template project, moving the slider causes a level change, the Dim and 0db switches work OK. So there is apparently something in the project I'm working on causing the disconnect. Any ideas?

  • Top master level meter above master volume slider not working

    I have a Power Mac G4, OS X 10.4.6, and GarageBand 3.0.2 (103).
    I used a keyboard and GarageBand software instruments to record many tracks for a song. It played in stereo. I saved it. Many days later, I went back and added more tracks, using my keyboard, to the end of the original song to lengthen the song.
    My problem: This last song now only plays back with sound coming out of the right speaker. There is NO sound coming from the left speaker.
    This original song and all my other saved songs play back in stereo - sound from both speakers. I noticed that the top master level meter above the master volume slider shows no green as this song now plays. The bottom one does show green for the volume as it plays.
    I copied a track and pasted it into a "new" song and it plays from both speakers. I copied and pasted an original track and one of the new tracks at the end of the song and both play in stereo in the "new" song.
    I checked to make certain that the track pan position is center top of all tracks. I even moved one track pan position entirely to the left on one track but still no sound from the left speaker.
    Could someone pleae help me?
    Power Mac G4   Mac OS X (10.4.6)   No sound from left speaker

    It sounds like somehow the pan position on the Master Track has been inadvertantly moved to the right on that song. You didn't say you checked that pan position, but that would explain this sort of thing happening. The meter is probably working correctly but the master has been panned to one side.

  • What are the impacts of IB control set to No at Master level

    What are the impacts of IB control set to No at Master level, but the item is serialized at master and Org level. These are service items.

    What are the impacts of IB control set to No at Master level, but the item is serialized at master and Org level. These are service items.

  • Multiple Country of Origin at a Material Master level- Foreign Trade import

    Hi Gurus,
    We have a requirement to store Multiple Country of origin at a Material Master level . One Part/Material is sourced from different vendors and they are manufactured in different countries . Please note that we are not using Batch Management . Is there any workaround to have this scenario without using standard Batch Management .
    Thanks,
    Prabuddha

    hi,
    you can use split valuation for this by using the valuation category field in material master in accounting 1 view.
    in this you have to maintain valuation category as "H" = ORIGIN.
    For split valution procedure you have to reffer the  follow this link.
    http://www.sap-img.com/mm025.htm
    THANKING YOU

  • Why apple is not adding tweaks like activator,volume slider in multitasking bar and a blacklist app

    Why apple is not adding tweaks like activator,volume slider in multitasking bar and a blacklist app?

    But quantity is not everything.
    Funny, because Windows proponents and users touted the quantity of apps available with that swiss cheese for security OS being "everything" or a big plus, but now say it isn't everything with iOS. Can't have it both ways.
    At present there are about SIX blacklist apps in the OFFICIAL Apple Store which I can buy for MONEY but have NO USE AT ALL because of the APIs restrictions.
    3rd party apps don't have access to private iPhone APIs for security reasons. Andrioid is following the same path as Windows. Their so called "open" OS is a swiss cheese for security mobile OS.
    If this isn't acceptable to you or having an option to block unwanted calls provided by the iPhone's OS is a very important want or need, stick with an Android or Symbian device that includes the option. 

  • Reapplying Master to Slide / Selection not working

    I've searched for this problem through the database without any hits.
    I've created my master slides with bulleted body text and heads. If I make changes to the masters, the changes instantly reflect as they should. BUT if I copy text from another presentation or source and paste it into the body text, Keynote is defaulting to Helvetica 12 pt (master is Arial 30). I right click on the slide for Reapply Master to Slide and nothing. I click the section, Reapply Master to Selection. Nothing. I try switching back and forth between other masters. Nada. I've tried pasting the copy into another program to strip it's formatting code. Zilch.
    Time and again I am forced to go in and reformat cut and paste copy manually using copy style and paste style. It's a tedious process since I'm merging some old and new shows.
    Anyone else encounter and solve this? Any help, much appreciated.

    Can I change my icon to a sheep? As in sheepishly shrinking away from the post feeling like a dope?
    Thanks Jerry. That certainly will do it. I guess I always mistook that pull down command as copy style / paste style in my haste.
    <Edited by Host>

  • How to create a substituion at Vendor master level

    HI,
    i need to make the House bank defaulted in vendor master while creating new vendor master in Xk01.
    For this i need to define substituion.Kindly provide me the path or transaction codes to create a substituion at vendor level.It would be a great help for me
    Points will be assigned
    Thanks
    Supriya

    Hi
    May be as 'Shannon' said, we can do the substitution at vendor master level.
    But, this is not like using TCODE:GGB1 - this is a user exit at the Vendor master program level.
    Thanks you 'Shannon', i don't have an idea on this exit part, thanks for sharing the information.
    VVR

  • Customize transport bar and save changes?

    Am I missing some here but if I customize the transport bar and make changes, close logic and open it again those changes are not there? Shouldn't my changes to the transport bar remain? How do I save them as standard for all projects? I just want the pre-fader metering button there on all my projects.

    No the changes in the transport bar are project dependent (this is not an overall preference setting) so you have to customize your template and take it from there.

  • HT1430 the "slide to unlock" bar disappear when I turn on my iPad

    the "slide to unlock" bar disappear from my iPad suddenly. I am not able to unlock the device to use it.

    See of this helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • A way to show what notes/chords are playing in transport bar?

    Hey everyone,
    You can see what chord or note you are playing in the transport bar when you are recording, but is there a way to display what note is being played after you have recorded and playing back the midi/instrument track?

    Score.

  • Why does camera icon appear next to slide to unlock bar on my IPod touch?

    why does camera icon appear next to slide to unlock bar on my IPod touch?  It makes a shutter sound when I turn the touch off

    rsejnost wrote:
    why does camera icon appear next to slide to unlock bar on my IPod touch?  It makes a shutter sound when I turn the touch off
    The camera icon appears so that you can take a picture quickly without having to enter your password.  It is not responsible for the shutter sound.  The Touch always made that sound when manually closing or going to sleep even with older iOS that did not have the camera icon.

  • Transport bar - lack of configurability

    Re: The transport bar in Logic 8
    Is it possible to save your own personal configuration of buttons so that all songs open with your selection? Seems to me to be a song-specific setting, not a global preference. It wastes time to re-configure the transport and you have to do it in every screenset!! (Let alone in every song)
    Regards - Colin

    Not really THAT easy...
    What if a song has 20-30 screensets in use?
    What if I need to regularly open old Logic 7.x songs (which I do)?
    Yes, I'll certainly re-configure my startup template, but a global pref would be better. I see that Logic 8 now offers 9 alternatives (in Global tracks) for Tempo (as before) but also for markers and signatures. Let's have alternatives for the Transport bar - ie different sets for different needs, that can be easily loaded via the local contextual menu.

  • Transport bar issue

    Hello Happy New Year...
    I dont know what i did but the end result is even when i have set the marker to 0 my transport bar is reading 7: 43. so basicaly now when im at the 16 measure im already at 8 mins.. anyway shed any light how to solve this problem?
    thank you,
    Jason

    Hello,
    maybe you dragged the start marker to the right by accident. It's the small grey handle on top left of the arrangement time track (just peeking out of the right side of the global track header).
    Grab it, drag it to the left to set the project start to a lower value.
    Fox

  • Ipad will work when you hit home and then slide the unlock bar - then when you get to the homepage, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    Ipad will come on when you hit home and then slide the unlock bar works fine - then when you get to the home page where the icons are, nothing works - not the home button, it wont rotate, scroll, cant choose icons...nothing.  help!

    The home button is the main button off the screen - where is the sleep button?  When I hit home I only see the lock slider (its black) and a button that has a flower on it that pulls up photos we took that are on the ipad.  Thanks for your help!

Maybe you are looking for