NO MATCHING G/L ACOUNT FOUND

DEAR EXPERTS,
Whenevre i try to add an A/P CREDIT MEMO , IT GIVES ME ERROR' 'No matching G/L ACCOUNT FOUND IN OACT" .WAT COULD BE THE REASON????

Hi Divya,
Purchase Return Account
Purchase Credit Account
Expense accounts
Check here
1. Goto Administration -> Setup -> Financials ->G/L Accounts Determination -> Purchasing tab -->> General sub-tab
2. Goto Administration -> Setup -> Inventory ->Item Groups -> Accounting tab
3. Goto Administration -> Setup -> Inventory ->Warehouse -> Accounting tab
Thanks
Sachin

Similar Messages

  • Search in Help Viewer always returns "No matching help topics were found".

    Hi!
    I'm running 10.3.9 on 14" iBook G4.
    Recently re-installed OSX from CD after a hard disk replacement. Help viewer was fine on the original / old installation of the same version number of OSX.
    The CD installs a version earlier than 10.3.9. Possibly 10.3.4? Cannot recall... is this important?
    After HDD replacement, went through all the updates fairly rapidly, and arrived at version 10.3.9. Excellent! Except one thing (there may be more, but I've only discovered this so far!)... searches in Help Viewer return the same message irrespective of what I search for. I type the search string (e.g. "dvd" ) in the search bubble in the Viewer window. The message is as follows:
    [bouyancy aid with question mark logo] No matching help topics were found
    I have tried the usual things, without success, of:
    - Removing the Famous Four cache and preference files/dirs.
    - Repairing permissions. This repaired a few 'permissions'.
    - Rebooting.
    I think the icon of the bouyancy aid is a comic irony, but very well suited to my situation. Anyone out there with any suggestions on how to fix, please?
    RSJ

    Excellent pointers, thanks!
    I haven't quite got it working, yet, but have got it to a point that is better than nothing.
    Very peculiar -- discovered that, after trying many of the troubleshooting ideas without success, the solution was to hit the "back" icon on the viewer to get to the list of help topics satisfying my search criteria... cannot work out why. It would appear that, for some reason, the viewer is skipping the page with the help topics, and going directly to the "No topics found" page. Curious. I am wondering if one of the above activities (from your help pages) may have helped.
    Anyway. Thanks very much for your help on this, and your *very* rapid responses.
    Yours most impressed,
    RSJ.

  • IPC:External Tax System: NO_ZONE_TREE_MATCH No Matching Zone Tree was found

    Hi All,
    I'm getting the below errer in CRM sales order.
    "IPC:External Tax System: NO_ZONE_TREE_MATCH No Matching Zone Tree was found.  Address: SHIP_FROM"
    Please give me some clue what could be the reason for the error..
    Thanks in advance,
    JM.

    The "NO_ZONE_TREE_MATCH" is an error message returned by the external tax engine (Sabrix) when the address information does not allow it to "match up" to a country, province/state, city, county or zip code. When this happens in an address validation, you will get this message. When this happens in a calculation transaction, no tax will be returned by the engine.
    Hope this helps.
    Dani

  • No event method with matching name and signature found on EventSet

    Dear,
    I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
    No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
    This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
    Thanks for your help,
    Regards,
    Mathieu

    It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
    See you,
    Mathieu

  • How can I correct this error: no matching code signing identity found

    I signed up as an apple developer so I could download the tools to learn to build apps. I just installed Xcode 5.1.1, when i opened the program and created my first test project I got an error message: "no matching code signing identity found". how can i get rid of (correct) this error? I am just learning and I am not ready to join the $99 developer program yet.

    Try setting Signing to None in the Target General pane.

  • No matching code signing identity found - Xcode error

    Hello,
    I am new to Mac and Xcode. I just want to learn Xcode and not publish any apps. Hence I did not enroll in the paid developer program.
    Whenever I try to create a project in Xcode, it gives me this error - "No matching code signing identity found". If I click on "Fix Issue", it asks me to add my apple ID. I did that but I cannot add it to any team. I also tried requesting a certificate through keychain. But I am not sure on how to check the status of that.
    Please pardon my lack of knowledge on this as I just a beginner. But any help on this will be greatly appreciated.
    Thank you.

    You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
    Best of luck.

  • ECATT error Variants that Match Selection  Cannot Be Found

    I have created an ecatt and I get the following error, Variants that Match Selection  Cannot Be Found.
    I am using an external variants/path, C:\Documents and Settings\scarpinod\SapWorkDir
    and a file, VAR_ECTC_ZVK11_MGROUP.TXT

    Hi Dave,
    The error indicates that the input parameters in the input file is not matching with your input paramters in the test script.
    Please try to download the input parameter format from the ecatt test configuration and input values in the text/excel file wihtout changing the format.
    This may solve your query.
    Regards,
    SSN.

  • Seeburger error - No matching inbound binding found

    Hi
    I am trying to buld a interface using Seeburger AS2 adapter. I have done all the config in XI and Seeburger level. But when customer sent the message he gets following error.
    HTTP/1.1 403 Forbidden^M
    server: SAP J2EE Engine/7.00^M
    content-type: text/html^M
    content-length: 826^M
    date: Tue, 18 Nov 2008 23:50:04 GMT^M
    ^M
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US" lang="en-US">
       <head>
          <title>SEEBURGER AS2 Server: Forbidden </title>
       </head>
       <body bgcolor="#ffffff" text="#000000" link="#0000ee" alink="#0000ee" vlink="
    #551a8b">
          <table cellpadding="0" cellspacing="0" border="0" width="100%" bgcolor="#dc4560">
             <tbody>
                <tr><td> </td></tr>
                <tr>
                   <td> </td>
                   <td valign="middle">
                      <h3>
                         <font face="sans-serif" color="#ffffff">SEEBURGER AS2 Controller</font>
                      </h3>
                   </td>
                </tr>
             </tbody>
          </table>
          <br/>
             <font face="sans-serif" size="-1">
               <b>
    403 Forbidden
               </b>
             </font>
          <br/>
       </body>
    </html>
    When I checked the Seebuger log I noticed following
    seeburger.as2.AS2Plugin#Plain###Inbound communication from TESTEDI to GFB2BDPI not allowed: com.seeburger.conf.BackingStoreException: Unable to execute query because: com.seeburger.xi.config.ConfigException: No matching inbound binding (message) found for FromParty:PT_TOLL ToParty:PT_GOODMANFIELDER subject:<20081119091602.651278.2248792@> [LOC: com.seeburger.as2.component.AS2Server.checkInboundRelation]#
    If someone can help that will be great.
    Thanks
    Shantha Bandara

    Hi,
    403 is a standard error if the AS2-IDs are not setup correct. You can also seet his in your log-file:
    "Inbound communication from TESTEDI to GFB2BDPI not allowed"
    Looks like the SenderAgreement is not referring to the correct parties...
    Greetings
    Stefan

  • ITunes Match on Windows 7 64 iTunes 10.5.2 64 -  - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.

    Windows 7 64 itunes 10.5.2 64 - I receive the following error message when opening iTunes - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.
    When I try to sign out iTunes freezes and I need to shut down windows entirely to get it to open again.
    Has anybody been able to resolve this issue?

    After many annoying sign-in-out-iTunes-match-activation problems I found an easy solution for me. When the iTunes Cloud symbol is broken (and I should sign in again) I just deactivate my notebooks (Windows 7) Wifi (with Fn+F5 for my Thinkpad).Then I call up the Itunes store and iTunes tells my that there is no connection to the internet (most probaply this step is not necessesary). After manual re-activation of my Wifi iTunes seems to re-establish the connection and the Cloud symbol signalizes that iTunes match does work, again.
    Hope, this helps.

  • Seeburger: No matching inbound binding

    Hi guys,
    I'm having the following error :
    I'm using Seeburger AS2 adapter and I'm trying to receive a message from an external partner. I've created the corresponding channels, sender and receiver agreements  but I'm getting the following error:
    No matching inbound binding (message) found for
    FromParty:XITest ToParty:B2BTEST subject:1209234884433
    I've set on the sender cchannel the 'AS2 message subject' as 'AS2 message test' and I think the problem is related to this configuration.
    So I changed the value of the field to '*' so that I'm able to catch any subjects, like the one above....
    But with this configuration '*', after activating the channel I'me getting a similar error on the 'communication channel monitoring' but with new subjects and with no party entities every 2 seconds...
    No matching inbound binding (report) found for FromParty: ToParty: subject:
    I've checked the threads
    Seeburger - async receiving MDN problem- no binding found for AS2 from Peter and
    Seeburger AS2 Adapter No binding found for: AS2, http://seeburger.com/xi from Murali but nothing....
    Do you have any ideas?

    Hi  Prateek,
    I'd already tried cleaning caches but no good...
    Hi Peter,
    I've found out what the problem was. What is the purpose of the flag 'Hostname check'? I'd the flag checked by default, I've unchecked it and now I'm able to receive the messages.
    Answering your questions, yes, both are using parties and for the MDN i only have the sender agreement and not the receiver.
    I'm sure I'll keep posting doubts in the next few days.
    Thanks for your attention and patience

  • Match Case in Find/Replace in TextEdit

    Before updating to Lion, when using the Find/Replace function in TextEdit, I could choose to select "Ignore Case", or I could leave that deselected in which case it would only Find & Replace instances which matched the case of the text I entered.
    Now on Lion, instead of that dialogue box poping up giving me that option, the Find / Replace function is built into the TextEdit window, and there's no option to select whether to match or ignore case. As it is, it just ignores case and replaces all matches for the text found, regardless of case.
    That is not what I want! I need to match case!
    Can I do that in Lion, or is that functionality completely gone?

    like a lot of Apple "Interface Improovements" the stuff is well hidden. What i just found on another board: Just click on the magnifying glass icon (left of where you enter search text). A drop down menu will appear with search options - "Ignore Case".
    There is also a lot of other neat stuff hidden there ... So happy searching! ;-)

  • Library does not match different users

    I have two different sign in accounts on my computer.  One is for me and the other is for my wife.  This was done to keep our email apart.  We share the same itunes acount.  The only problem is the play list in the libary does not match from one acount to the other.  I want the itunes to be the same no matter who is logged in.

    My i-Tunes Purchased file
    Do you mean the green iTunes purchsaed playlist in iTunes?
    For some reason the songs from Purchased are not moving over to my Library
    A song in a playlist HAS to be in the library.
    My iTunes Library states 1051 songs.
    Where are you seeing this?
    Are you selecting Library -> Music and looking at the bottom?
    Note that the Purchased playlist will also include movies, tv and videos, which are not in the Music section.

  • VI revision history numbers match, but file sizes differ.

    Hi all,
    I am using LabView 7.0.  I am trying to create a utility that compares the VIs on two different computers to make sure that the VIs distributed on both systems are the same.  I tried accessing the Revision History number to compare the two files, but the execution was very slow because it is remotely opening VIs to access the property node and I am analyzing 100's or thousands of files.  I then tried to compare the files by file size using the File/Directory Info.vi and noticed that many of the files that had the same revision history number had different file sizes.  What may be causing these file size differences when the revision numbers indicate that they are the same?  I do not believe that anyone has modified the revision history numbers for any of the VIs manually.  Also, is there be a better method of comparing the files than what I am doing?
    Thanks in advance!

    Hi,
    Thanks for your responses. I investigated the problem some more and it looks like the file size differences are caused when someone recompiles the VIs.  I used the "compare VI" utility to compare VIs with different file sizes and matching revision numbers and found zero differences.  So i ran this experiment:
    1) I then created two identicle copies of a VI, making sure that the file sizes matched. 
    2) When I forced a recompile on one of them (Ctrl+Run Button) and saved the changes, the file size changed! 
    3) I went through and used the "compare VI" utility to compare the two files and there were zero differences and both had the same revision number.
    I guess the revision number only increments when you make some changes to the VI, becuase I did not have to change anything to get the file size to change, I just recompiled and saved.
    I still have the problem of compiling a list of revision numbers however.  I am happy with the results of my VI except for how long it takes to execute.  My VI simply opens a VI reference, accesses the revision number through the property node, and closes the reference for the VI.  This is done recursively for all of the VIs in a directory on a remote computer and takes about 25min for ~500 VIs to complete.  I guess it takes so long because I am remotely opening all of those VI front panels over the network.  Comparing file sizes is much quicker (20 sec to execute) but it would be nice to have both the revision number and the file sizes to determine the state of the code on a particular machine.  Is there any other method of getting the revision number that might be quicker?
    Thanks again for your help!

  • Refused To Price Match

    Two weeks ago, my wife upgraded her iphone to iphone 4 (16gb)  at Best Buy Dublin, CA (store 134) and price-matched the price from Fry's electronics with no problems after verifying price and availability.  Yesterday, I went to Best Buy Union City, CA (store 144) to upgrade mine to iphone 4 (32 gb) and still the Fry's Electronics runs promo and they have in-stock.  Store 144 refused to price-match without clear explanation and without verification and even after I showed them the receipt from my wife that Store 134 did price-match and still refused to price-match.  I also found out that both store has the same store manager.  I'm really disappointed.    

    Lenovo only price match a computer with the exact same configuration, this is their policy. Unless someone from higher up intervenes then you are unlikely to get the price differences back.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Java matcher - one less result than expected

    Hi all,
    I have a question about the Java matcher, which may have a very simple answer, but after a while trying to find the answer (through debugging and googling), I have come up with no solution.
    Basically, I am trying to parse through CSV files and find text matching a user-defined String that is entered. I have written a small CSV file and have written many instances of one word (for instance "java"). However when I use the matcher.find() method upon the content of the CSV file, it always finds one less match than are actually in the file! (e.g. if there are 6 instances of the word 'java', the matcher finds 5). I have printed the contents of the CSV file to the screen and the whole file is correctly displayed, so it must be something to do with the way the matcher works. Here is my code, although it is only basic at the moment:
            Pattern pattern = Pattern.compile("java", Pattern.CASE_INSENSITIVE);
            Matcher matcher = pattern.matcher(pageContents); // this is a String containing the contents of the CSV file.
            ArrayList<String> allMatches = new ArrayList<String>();
            if (!matcher.find()) {
                System.err.println("\nNo Matching Data Could Be Found In This Text File.\n");
                System.exit(0);
         while (matcher.find()) {           
                String individualMatch = matcher.group().trim();
                System.out.println(individualMatch);
                allMatches.add(individualMatch);
            return allMatches;So basically I am returning an ArrayList of Strings which contains all matches of the word "java" (just as an example).
    Any help would be greatly appreciated!
    Thanks,
    Jon

    if (!matcher.find()) {  // This line matches the first one, and throws it away
    System.err.println("\nNo Matching Data Could Be Found In This Text File.\n");
    System.exit(0);
         while (matcher.find()) {  // .. since you call find here again.         
    String individualMatch = matcher.group().trim();
    System.out.println(individualMatch);
    allMatches.add(individualMatch);
    return allMatches;Kaj

Maybe you are looking for