No Material Master replication from R/3 to CRM

Hallo guys,
i've got no replication of material master, haven't tried any other object except customizing but customizing is triggered from CRM and was replicated fine. Can anybody help me how can i debug the replication process from R/3?
Thanks for your help in advance.

Dmitry,
You first need to determine where your errors are happening?
1.  Do you have blocked queues on CRM?  If you see a blocked inbound/outbound queue on CRM via SMQ1 or SMQ2, then you can try to rerun the BDOC message in the queue.
2.  Is there tax code customizing not downloaded correctly into CRM?  This sometimes can hang up your download of materials?
3.  Have you looked at SMW01 after the load to see if you have any BDOC's in error, the queues were empty?
4.  What is the status of the initial load R3AM1?
I would hold off from debugging until I figure out where in the download process that I am receiving the error.  Once I know that fact them I can debug a single download.  You will have to set a filter on the material object to a single material and attempt an initial download.  When you perform the initial download you will need all queues deregistered on the CRM side, so that you manually execute the BDOC import into CRM. 
The last step will require placing a breakpoint into the validation function module for material.
I believe validation function module is: COM_PRODUCT_MAT_VALIDATE.  If you have questions along the way of debugging the flow, please reply back and I will try to see if I can answer them.  It has been a little while since I had to debug our middleware downloads.
Good Luck,
Stephen

Similar Messages

  • Material Master Replication from R/3 to CRM 7.0

    Hi ,
    I am trying to replicate the Material maintained in R/3 to SAP CRM 7.0. Here is, what i have done up till now...
    I have downloaded
    Object DNL_CUST_BASIS
    Object DNL_CUST_PROD0
    Object DNL_CUST_PROD1
    using tcode : r3as & all have been downloaded successfully.
    But when i try to download Object Material from R/3 to CRM using the same tcode, its giving me an error saying
    004 : Hierarchy for material types does not exist
    005 : MATERIAL: Object will not be loaded
    Right now i am able to see the categories & hierarchies in tcode COMM_HIERARCHY.
    I would appreciate if some one can suggest suitable solution for this issue.
    Thanks,
    Edited by: SAPRPT on Aug 12, 2009 9:23 PM

    Hello ,
    There might be two reasons:
    1)There must be some inconsistency in CRM with respect to hierarchies.You can use reports COM_HIERARCHY_DELETE_ALL in CRM and then again download DNL_CUST_PROD1 and then object MATERIAL.
    2)There must be some materials in R/3 which have been maintained for some obsolete hierarchy.
    That means hierarchy is not present in CRM and/or also it might not be present in table T179 of R/3.But in table MARA,this hierarchy has some records.Please check and correct the records.
    Best Regards,
    Shanthala Kudva

  • Problem:related to material master replication from r3 to srm

    hai everybody,
    hai to all of u my friends....recently i have learned sap srm 5.0..and now i am practicing in my institute from starting configuration with a fresh client.everything has done successfully except replication of material master.while doing material master replications the system throws an error like" product hierarchy has not maintained" and one more error while executing smq2.. like "exception condition :guid forlogsys_changed"raised....thanks in advance

    It seems that the logical system name has been renamed or changed. You need to update the config tables. Fix it using Trx BDLS.
    Regards, IA

  • Material Master Replication From SAP R/3 to SRM

    Hi Gurus
    For the testing, I maintain a Job for the program SMOF_DOWNLOAD on daily basis in SRM system and I created the 5 material Masters in R/3. I am facing two issues.
    1. The Material Master are replicated immediately, its not working as per the job Scheduled ( I  Scheduled the job on every day night at 24:00:00).
    2. I am able to see the R/3 Material Masters in SRM system in tcode COMMPR01, but I am unable to use the Product IDs in SC creation, I am receiving the error message as "Product 1000056822 does not exist in plant 1560 or it has been flagged for deletion (Item Test SAP R/3 to EBOP )".
    My material master is relevant to plant 1500, I change the plant 1500 in SC basic data, but the error is not disappearing.
    Please suggest me.
    Thanks in advance
    Thanks & Regards
    Sada

    HI,
    Check if the plant is defined in the PPOMA_BBP org structure.
    If you have not defined the org elements in the extended attributes tab then the system will not know in which plant the material is been created.
    Thanks & Regards,
    Kiran

  • Material Master replication ... ECC to CRM

    I have a requirement to replicate a material master record from ECC to CRM, based upon an 'external event' (i.e. an event other than the change of the material master record itself, in ECC).    The event is the change in status of a record in a z-table. 
    What is the best way to accomplish this?  Is there a function module or BAPI that I can call, to trigger the replication of a material to CRM, whenever this event occurs?    Are there other suggested / better approaches to satisfying this requirement?
    Your help will be much appreciated!
    Thanks,
    Duane

    If your CRM system is new then you have to do the initial download of material from ECC to CRM. To do that first download the material customizing object (like category. group etc), from transaction R3AS (CRM side) then download the product/Material.
    After do the initial download, activate the change pointer for the material related message type (matmas etc..)from transaction SALE (ECC). And schedule I job to run its on daily basis.
    If can check the below link for details
    [http://help.sap.com/saphelp_crm52/helpdata/EN/46/57605301a208e7e10000000a114a6b/content.htm]
    Thanks
    Subhankar
    Edited by: Subhankar Garani on Sep 1, 2011 12:21 AM

  • Vendor  master repliaction &  Material Master Replication

    Hi GRM Gurus,
    Whether Vendor  master replication &  Material Master Replication is applicalbe only to
    Plan driven procurement (PDP ) Scenario only (Extended Classic)   (or)  it is needed for Classic Scenario ?
    Please give your views
    Regards
    G.Ganesh Kumar

    Hi
    First of all for any scenario except Stand alone.  you need to replicate material and vendor master from backend system.  because in SRM we dont have any master data.  We purely depends on backend system. 
    Regards,
    Satish gopal

  • Guidance for getting material master data from database table

    Hi,
    I need guidance to fetch following Material master data from the system data base.Please guide me for the same.
    BASIC DATA1
    BASIC DATA2
    MRP1,2,3,4
    WORK SCHEDULING
    QUALITY MANAGEMENT
    ACCOUNTING1
    ACCOUNTING2
    COSTING1,2
    PURCHASING
    PURCHASE ORDER TEXTSALES ORG1,2
    SALES GENERAL/PLANT
    PLANT DATA/STOR.1,2
    WAREHOUSE MGMNT1,2
    Also please tell me in general what is the reason for error while uploading the data into system using BAPi(AM talking about return message error).
    Thank you.
    Edited by: sanu debu on Feb 24, 2009 12:41 PM
    Edited by: sanu debu on Feb 24, 2009 12:42 PM

    Use BAPI's 
    BAPI_MATERIAL_GET_DETAIL
    BAPI_MATERIAL_GETALL
    BAPI_MATERIAL_GET_ALL

  • Vendor Master replication from EBP and MM to SUS

    Hi !
    We would be replicating Vendors from R/3 as well as from EBP to SUS. I believe that there is certain configuration to check duplication of Vendors and also to assign a single business partner ID even if a Vendor is replicated both from EBP as well as from MM. Can anyone thro some light on this & the procedure...
    Thanks

    Hi,
    For the Vedor Maste replication from EBP and MM to SUS,
    U need to maintain the proper RFC conncection between R/3, EBP SUS and XI as a middleware.
    U can transfer the Vendor by using the T.Code -  BBPGETVD.
    U can transfer vendor to SUS using
    transaction BD14 with message type Z_CREMAS_SUSMM as
    SAP suggested.
    Your error due to incorrect mapping in Integration
    Directory of XI.Kindly check the Interface
    determination for message type Z_CREMAS_SUSMM.
    Please award the points for the help.
    BR,
    Vijay Mittal

  • Vendor Master Replication from MM to SUS

    Does any one have experience on Vendor Master Replication from R/3-MM to SUS (scenario without EBP).
    Is this replication made via XI?
    Which are the configuration steps for this scenario?
    Thanks
    antonio

    Hi antonio,
      I hope now you r now transfering vendor to SUS using 
      transaction BD14 with message type Z_CREMAS_SUSMM as  
      SAP suggested.
      Your error due to incorrect mapping in Integration 
      Directory of XI.Kindly check the Interface 
      determination for message type Z_CREMAS_SUSMM.
      If possible send more details for error .Is this at 
      SUS End ?
    Regards
    Sachin S M

  • Return PO Price is picked up from MAP of materia master,not from info.recod

    User Requirement :
    When creating return po ,the price is picked up from MAP of material master ,not from info.record
    I wrote a code at PO Enhancement "MM06E005" user exit  "EXIT_SAPMM06E_017",but don't change the price ,pls help me check what  the problem is ,thanks.
    The below is my code.
    DATA : M_VERPR LIKE MBEW-VERPR,
           M_PEINH LIKE MBEW-PEINH,
           M_MEINS LIKE MARA-MEINS.
    CLEAR :M_VERPR,M_PEINH,M_MEINS.
    CHECK SY-TCODE = 'ME21N ' OR   SY-TCODE = 'ME22N' OR   SY-TCODE = 'ME23N' .
    IF I_EKKO-BSART = 'ZNB7'.
        LOOP AT TEKPO.
      SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                             WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
        SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
        TEKPO-INFNR = '  '.
        TEKPO-NETPR = M_VERPR.
        TEKPO-PEINH = M_PEINH.
        TEKPO-MEINS = M_MEINS.
        TEKPO-BPRME = M_MEINS.
        TEKPO-NETPR = TEKPO-NETPR * I_EKKO-WKURS.
        MODIFY TEKPO TRANSPORTING NETPR PEINH MEINS BPRME NETPR.
        CLEAR TEKPO.
      ENDLOOP.

    Hi  Gunawan,
    According your meaning ,I change the logic as following:
    IF I_EKKO-BSART = 'ZNB7'.
      SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                           WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
      SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
      TKOMV-KNUMH = ''.
      TKOMV-KAWRT = M_VERPR  *  I_EKKO-WKURS.
      TKOMV-KPEIN = M_PEINH.
      TKOMV-KMEIN = M_MEINS.
    EndIF.
    But the values of the fields are not updated,I need to write the code in EXIT_SAPMM06E_017 of PO Enhancement,may you help me ,thanks.

  • Material Group Replication from ECC

    Dear SRMers,
    System Landscape : ECC 6.0 and SRM 5.0.
    I am doing a material group replication from  ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC  was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and  the system gave a CALL_FUNCTION_OPEN_ERROR.
    I defined the CRM Consumer as SRM in the CRM middleware parameters..
    My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
    Points will be rewarded for answers.
    Thanks in advance,
    Bob

    Hi,
    The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
    Also Check:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
    BR,
    Disha.
    Pls reward points for useful answers.

  • Extend material master data from one plant to another plant

    hi,
    how can i extend material master data from one plant to another plant.
    is there any sap standard transaction for this ie. bdc/t-code.
    thanks in advance.......
    rahul

    Hi
    If you want to extend the material form one plant to another then below are the possible options.
    1) MM01 - Use the material in the reference and fill in copy from and to then press enter to complete the extention.This is recommended only if you want to extend very less records.
    2) Use LSMW and record MM01 thru BDC recording available in LSMW and make the template in excel and convert it to .txt tab delimited format to upload more records.LSMW is the perfect tool and is used extensively in all the projects.
    3) Get the help from ABAPer to create upload program and include the BDC recording.
    There is no standard T code available in SAP becoz data mainatenance in the material master will be based on the industry.
    Hope it will help.
    Thanks/Karthik

  • Scheduled delta replication from R/3 to CRM

    Hello Experts,
    we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
    And the delta  down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
    thanks in advance.
    regards,
    kalyan

    Hi Kalyan,
    If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
    The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
    Example:
    Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
    After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
    As you reassign the subscription, the following inconsistencies occur:
    Business object 111111 has not been synchronized in the R/3 back-end.
    Business object 222222 is not available in the R/3 back-end.
    And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
    Regards
    Nadh.

  • BP Replication from R/3 to CRM

    Hi Forum,
    I am facing an issue with BP Replication from R/3 to CRM.
    Although the same scenario and configuration works well on my dev and qual environment and the same has been trasported to Production, apart from that R3 dev and qual system are completely updated with Prod data as on date so there is no question of any mismatch at the data level and config level.
    The following are the error messages am receiving in SMW01 for BUPA_MAIN:
    1. Business partner with GUID 36F36B473D31C04985CC8AEB314C6BE3 does not exist
    2. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
    Now none of my BP are flowing to CRM because of this issue.
    Appreciate any pointers for the resolution.
    Regards,
    Amit

    Hi Vikash,
    The RFCu2019s have been checked for authorisation test, remote logon n local logon. The RFC user is a dialog user and is working well for all logon. I have also checked both the systems they have the logical names as described by you (source & destination both).
    Another thing that validated my point regarding the connection setting is that the materials are flowing fine between the system and even the changes in these materials are replicating properly hence the delta for material is also fine.
    The Inbound and Outbound queues have been deleted from both r3 and crm and the only job running again at the moment is customer_main.
    Regarding you concern for the queue R3AI* it has not been generated even once whenever I have started the initial load. Right from the starting I am monitoring R3AD* in all the outbound and Inbound queues of both the systems.
    The sysfail message is coming for R3AD queue hence I think it is of no use to us. Still if I follow the error message it points towards SMW01 and there the error message is the same as described in the 1st message.
    I have just noticed 2 BP that have come in CRM as STP but its been hours after that no BP is flowing in.
    Now I am eagerly looking out for the final findings that we are going to get from the system when the issue is resolved.
    Thanks again and appreciate the efforts taken from your end.
    Regards,
    Amit

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

Maybe you are looking for