No matter what I do, get "Connot connect. Call in progress." in box with i symbol.

I even tried turning it all the way off and waiting. I'm new to this so if you think you can help, please use simply (newbie) language.
Oh, and this started after the handset was in my purse, so perhaps a random button got pushed by accident?
Thanks for any help you can offer.
Solved!
Go to Solution.

Great, I'm glad to hear! As a heads up, the battery pull will often help resolve most minor glitches. But if you ever have any problems in the future, don't hesitate to ask.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Similar Messages

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Trying to reset/restore my daughters ipod, but no matter what advice I get, nothing works. There is no summary tab on itunes to restore/reset. PLEASE HELP!

Trying to reset/restore my daughters ipod, but no matter what advice I get, nothing works. There is no summary tab on itunes to restore/reset. PLEASE HELP!

Without knowing current status of the iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

On my iPhone no matter what i always get a message "Your Apple ID has been disabled" even though i can log on on my laptop...

On my iPhone no matter what i always get a message "Your Apple ID has been disabled" even though i can log on on my laptop...

That won't help. You need to contact iTunes support so they can re-enable your account. They only work via email or live chat: http://www.apple.com/emea/support/itunes/contact.html

No matter what, I cant get the Device Selector to become active in Netbeans

This is totally frustrating. For the life of me, I cannot get the Device Selector to work
On my Development machine
I've installed all the prerequisites for Java ME SDK 3.3 EA (Early Access) using Raspberry Pi.
Windows 7,
Netbeans 7.3 full bundle with support for ME
Jave ME SDK 3.3 preview
The device address manager is set up
the nb-me-sdk-plugins-uc plugins have all been installed
the j2me platform has been installed under the "Java Platform Manager"
the customer device editor has been set up to simulate my raspberry pi exactly as in the video below
under Installed Plugins, Java ME is active
On my Raspberry Pi
Java ME 3.3 is on my Raspberry Pi
I can run the testuser.sh program
I'm trying to follow along on the Oracle video by Simon Ritter
http://www.youtube.com/watch?v=nA7AMuTK9sE&feature=youtu.be
No matter what I do, I cannot get Tools->Java ME->Device Selector
or Tools->Java ME->Active Device Manager to become active.
I've spent the better part of the day trying to figure this out, and I've had no luck. What am I missing?
Vinnie
Edited by: vdipren on May 25, 2013 7:27 PM

Hello Alexander,
I also tried to install netbeans and Java Me, and got stuck on the same problem as Vinnie: the menu item `Device Selector` is grayed besides most other items in the same menu.
The grayed menu items in menu Netbeans/Tools/Java ME are:
          WMA Console,
          Java ME SDK Update Center,
          Custom Device Skin Creator
          Active Device Manager
The only one that is not grayed is: 'Device Database Search'.
I made sure the device_manager is running. You asked Vinnie to run emulator.exe from the commandline. I did and it outputs the help instructions.
I like to provide you with the log files, but how to do that? They are quite big! Dou you want me to paste the contens of the files in here?
Thanks for giving it your time.
Jan

Lightroom launches automatically no matter what type of device is connected.

I have the PC version of LightRoom running on Windows XPSP2. When any USB
device is connected to the computer (read: Printer, Video Camera, Sound
Recorder, Ipod, PocketPC) Light Room Launches.
I have selected "Do Nothing" on the Preferences Dialog to indicate behavior
when a memory card is inserted but it doesn't affect this.
Any suggestions on how to fix this?
Thanks,
Rikk

The FAQ is a Subforum at
Lightroom FAQ and was to remind you to read the forem before posting. A search would bring up your issue.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

What do i need to connect my mbp to a tv with a thunderbolt port?

I have an HDMI compatible (?) tv and my macbook pro has a thunderbolt port (instead of the minidisplay port) and i want to hook it up to my tv but i don't know how or what cables i need. thanks in advance!

Mini DisplayPort is the same as Thunderbolt, the two connectors are identical physically but the capabilities are different. Sellers typically have the Mini DisplayPort connector listed as such, so it is hard to find a Thunderbolt connector. But all you need is a Mini DisplayPort to HDMI adapter. You also need the long HDMI cable, which you probably already have.

I just recorded my first web-cast on my I-pad, but am unable to upload this no matter what - no luck uploading direct to my blog, or my 'box', it's too large to email and so on...is there some obvious setting I am overlooking?

I am looking for some help on this one, please...

What do you mean your "box"?
You can't upload files from safari, but you can Upload a video on youtube using their app. And possibly on other video websites.
There are also the solution to go through your laptop, via iTunes or a "Dropbox" like solution.

HT201412 Slide to unlock does not work no matter what we try. Phone receives calls and messages but we cannot answer either because the phone will not respond

iPhone 4s: Slide to unlock doea not work. Phone receives calls and messages but we cannot answer. We have tried numberous times to turn on/off to no avail.

It sounds like your phone is broken.

HT1758 can't get computer to start up only white screen with apple symbol on screen. help :)

Its a Mac5,1 2006 model

You may have suffered a hardware failure, please carefully read and methodically follow the steps Apple explains in Mac OS X: Gray screen appears during startup located at http://support.apple.com/kb/ts2570

Excel (Office 2010 64 bit) will not connect to Oracle DB not matter what I try

Hello Everyone,
I started a new role that requires me to interact with an Oracle DB using Excel. Currently I have both the 32 bit and 64 bit Oracle clients installed on my Windows 7 PC.
Firstly I can TNSPing the database I need to connect to, I can also connect using SQLPlus to the desired database, I can even connect using TOAD.
No matter what I try I cannot connect using Excel VBA (Office 2010 64 bit).
The process below used to work for me in a different location, now the objDatabase always is returned "Empty"
Set objSession = CreateObject("OracleInProcServer.XOraSession")
Set objDataBase = objSession.OpenDatabase("database server", "user name/passsword", 0&)
I am not even able to set up a simple ODBC connection working. I get a error "ORA-12557: TNS:protocol adapter not loadable."
When using a ADODB connection I get this error. Run time error '-2147467259 (80004005)':
[Microsoft][ODBC Driver Manager] Data source name not found and default driver specified.
I have place the TNSNames file in both Oracle Home's
I have even reinstalled Office 2010.

Hi,
The 12577 error (12557: TNS:protocol adapter not loadable) is related to Windows Environment or Oracle Home PATH because sqlplus command works smoothly when I execute it inside ORACLE_HOME\bin.
There are two solutions to this issue:
1. Put the Oracle DB Home in front of the other paths in the PATH environment variable.
2. Remove ORACLE_HOME From environment Variable and re-boot PC
http://www.dba-oracle.com/t_ora_12577.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have further question about the ADODB, I recommend you post the question to MSDN forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support

For whatever reason I can't get a link to a youtube video to work no matter what, other URLs work fine

Title says it all really. I have an image button on my website, and when clicked should link to a youtube video. However, no matter what, I always get www.mywebsite.com/www.youtube...etc. And yes I know you need http:// in there or something to get it to work. I've tried every variation of the youtube link, including the shortened one it gives when you click the share icon. But no matter what, I get the same result. I've tried deleting the whole thing and starting from scratch too. I have other images that link to other websites, and those all work fine. It's just this youtube one. I've even tried copying one of those, changing the image, and posting the link there. Nothing.
Maybe I'm just missing something. I'm not the most experienced person with the software, so bear with me. I'm using CS5.5. Let me know if there's anymore info I can provide to help.
Thanks!

If your website host has a caching engine turned on, you might not be able to see the most recent version of your page right away. If I remove https:// from your link, I can replicate your results. Have you tried saving your page with a different name, and uploading that as a test?
If you mouse over the two graphics in the following link, you can see that the one on the left will add my website link to the URL, while the one on the right works as expected: Link Test

I cannot connect to the internet, I get a message that "connot connect to the proxy server. My firefox will not connect, I can connect via aol.

cannot connect to internet via firefox, can connect via aol, firefox was conneting before, now I get "connot connect to proxy setting"

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

My ipod wont start no matter what do

my ipod is stuck on the apple logo no matter what i do, i trien connecting it to itunes and it did but its still stuck to the apple logo and everytime i turn off it goes back to the apple logo after 2 sec

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

After opening my yahoo mail window, I keep getting a very narrow dialogue box with the words "log into Xmarks" I cannot ... and everything is frozen. How can I get rid of this thing, and what is it? I have to hit CNTRL + ALT + ESC to get rid of it.

After opening my yahoo mail window, I keep getting a very short and narrow dialogue box with the words "log into Xmarks" I cannot ... when it pops up, always upper left of my laptop screen and I try to get into my yahoo mail web page, I get a DING sound and cannot enter it ... everything is frozen. I have to hit CNTRL + ALT + ESC to get rid of it - and then reload my Firefox browser to get back to my yahoo e-mail page ... fortunately for me, Firefox re-stores a previous session ... How can I get rid of this intrusive thing, and what is it? Thanks in advance ... Ted Beaudoin, Welland, ON, Canada

Remove VideoFileDownload and find a downloader that doesn't contain TextEnhance.

No matter what I do, get "Connot connect. Call in progress." in box with i symbol.

Similar Messages

Maybe you are looking for