No menu and no window for application

DiskWarrior loss suddenly working window and menus, but is working (many mach-messages and processor switches).
Will it be able to generate a new window when it needs a response?
Thank you,
Karl

I am having what is perhaps a similar issue with a Sony Z1E
We have 2 suites here, both upgraded to FCS2.
The DPG5 is fine - capture works as normal, as it always has done.
However, the Mac Pro (Quad 2.6) is not capturing correctly. You can open the log and capture window, you can set in and out points that reflect the actual TC on the tape, you can view footage in the window if you manually tell the camera to play back, but you cannot control the camera at all with any of the onscreen controls or keyboard commands.
Both machines are using the same settings. Camera verified to capture correctly with the working machine using those settings. Assorted HDV settings tested - all exhibit the same problem.
Both machines are fully up to date and have had FSC2 upgraded on them from FCS. The only difference is that one is an Intel box, the other is a PPC.
I am totally baffled - capturing was working on the Mac Pro just fine before the upgrade. Now only its G5 cousin is working.

Similar Messages

I have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing

i have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing during video game parts and during playing its 3 or 4x slower reactions, make update for ios5 please,
- reminders are ok
- camera- perfect
- newstand - perfect
- icloud too

Hi
I have a iPhone 4S this is not siri it is actally something to help those who have some sort of disability by reading the screen you can disable this by going to general then go to the bottom to accessability
Hope this helps you

I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec

I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Help! My apple TV doesn't respond to the remote. I've tried resetting by pressing the menu and rewind buttons for six seconds and it isn't working.

My apple TV is not responding to the remote. I've tried pressing the menu and rewind buttons for six seconds and no response, I've also tried changing the battery and that hasn't done anything either. Not sure what else to do!

Have you tried disconnecting the power chord on the Apple TV for a few seconds, and then plugging it back in to restart the Apple TV? There may be a glitch with the ATV, and not the remote.

Systems and platforms: Windows for GlassFish Mobility Platform 1.1

Hi all,
I'm new to sun glassfish mobility and wanted to try out the solution. I have a small company for J2ME based hadheld application development. Please help me with below questions.
- As per Sun GlassFish Mobility Platform technical spec below, for operating systems and platforms i have Windows, but it says development only. What does it mean? Is it that i can not run the Sun "GlassFish Mobility Platform 1.1" in windows system?
Please suggest.
Platforms and Requirements
Operating Systems and Platforms
Solaris 10 Operating System
Red Hat Enterprise Linux 4 and 5
* Windows (development only)*
Application Server
Sun GlassFish Enterprise Server 2.1
Client Platform
Java Platform, Mobile Edition (Java ME)
CDC 1.1.2, CLDC 1.1, MIDP 2.0
Development Kit
J2SE 5.0 and JDK 6
Synchronization Databases
MySQL
* Oracle 9/10

This means that we don't support deployments of the gateway server on the Windows OS in a production environment.
The platform deploys and runs fine on Windows, we have systems running the platform on NT, XP and Vista and we support development of Mobility Platform applications on Windows.
-Hans

What's the difference between redundancy and recovery window for retention?

Hello all,
I'm still trying to get a grip on this concept for RMAN backup planning.
I recently ran into a situation as follows.
I have the backups set to a redundancy of 1.
I have instance1, which had GRID jobs to run RMAN backups as follows
Incremental database level=0 weekly at Wed at 2:30am
I have daily backups, incremental level=1 each evening
I have archive log backups through the day.
What happened, was that apparently on a Tues some time, the development team deleted data from almost every table in their schema.
The didn't discover this till midday or so on Wednesday.
I went to try to restore...and RMAN couldn't do it. I had found a SCN for early the Tues they did it...but I got the following error:
RMAN> RUN
2> {
3> SET UNTIL SCN 4590383198282;
4> RESTORE DATABASE;
5> RECOVER DATABASE;
6> }
executing command: SET until clause
Starting restore at 28-APR-10
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=639 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: NMO v4.5.0.0
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=638 device type=DISK
creating datafile file number=1 name=+DATADG/instance1/datafile/system.284.697137287
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/28/2010 15:53:00
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
From what research I did...it appears that since I did not have a level=0 incremental from before, it could not reset the database back in time. The previous one had been deleted since, I guess I had a redundancy of 1.
So, I thought I had a week backup they way I have it set..but that assumes that errors are found pretty quickly before the next level=0 backup.
I want at least 1 to 1.5 weeks worth of backups. I do have the problem that we do not have many tapes in rotation, so I cannot go for too long...may 2x weeks tops.
I'm trying to rethink my strategy, but I'm confused as I read as to the difference between setting RMAN retention with redundancy vs recovery window.
Can someone give me an explanation how you understand it? I'm reading on the web and in oracle books, and for some reason, it just isn't clear to me what is the best way to go....especially when I see that redundancy and recovery window might both be set??
Thank you in advance,
cayenne

Dear Cayenne
AFAIK RMAN doesn't claim that "you haven't enough backup". Please read the error you got carefully
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATADG/instance1/datafile/system.284.697137287'
and check the following link:
ORA-01180: Cannot create datafile 1 when doing RMAN restore onto 2nd server
Moreover, could you please use LIST BACKUP command and see whether you have enough backups?
Read "Redundancy Based Backup Retention Policy" from the following link:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/strategy003.htm#sthref139

Best Practice - Leopard Server and a Windows Server/Application

Our family owns an accounting practice in Northern California. We all use MacBook Pros running Leopard as our client machines.
Our customers all use QuickBooks for Windows for their accounting software. We currently host and store our customer's QuickBooks company files on a Windows 2003 SBS Server. Our staff connects to the Windows Server to launch QuickBooks and perform our accounting services. We do not use any of the features of the Windows Server besides the ability to log in with multiple user sessions to launch QuickBooks from both internal and remote office locations.
Since we all use MacBook Pros, we'd like to use Leopard Server and implement mail, calendaring, wikis, etc. My dilemma is figuring out if this is technically possible because we need to continue to log into a Windows PC, Server, etc with multiple staff's sessions to perform our accounting services with QuickBooks for Windows.
Can someone suggest a way we can do this? I'm not very technical since I am an accountant! We're hoping this can be done somehow!
Thanks for any suggestion and assistance!
John

We also have Quickbooks as our legacy Windows app.
Quickbooks files for several companies are stored on our Mac OS X Server, which is accessed by a Windows 2003 Server.
I considered using Parallels or VMware, but the administrative overhead seam excessive. (One installation of Windows is too many). Windows Terminal Services seamed the best fit. Additional client access licenses were required from Microsoft as Windows Server only comes with two administrative RDP licenses.
Our staff and staff from accounting and tax consulting firms connect to Quickbooks on the Windows server via RDP. Internally, we have a couple of diskless thin clients, and iMacs with RDP software installed. Externally, both Windows and Mac OS X clients connect to our 10.5 server IPSec VPN, and then to the Windows server, again via RDP.
Performance is acceptable, as here in Australia we now have ADSL service with 1-2Mbps upstream. On my 23" display (Mac OS X 10.5), situated 1200miles away, a RDP connection at 1280x1024 works seamlessly.
On the Mac Server side, we have recently upgraded to Leopard Server, and thus haven't implmented all the fabulous new features such as calendar sharing and wikis, but we are using network spotlight, and of course the Mail server. Additionally, we have a Fujitsu SnapScan which scans documents that are then automatically OCR'd, and made available by network spotlight. All very cool.
Further work to be undertaken;
- Have the Windows server logins authenticate with our Mac OS X Open Directory. Currently account credentials are duplicated.
- Implement public key cryptography for the VPN, so that we can revoke individual client VPN installations
- Implement two factor authentication (probably CryptoCard)
- Batten down the permissions on the Windows server. The default Quickbooks installation required an unacceptable level of user rights.

How to set Menu and Title functionality for a remote control in a menu?

I have a main menu (countries) and under each country there is a submenu (regions). When I play my DVD on my Mac it seems to function alright:
If I go to country C and hit the "menu" button, nothing happens (I see the "action prohibited" line popping up). And nothing should happen of you hit menu in a submenu. Only if you hit Title/Top menu you should be able to go to the main menu.
However... When I play my DVD on a DVD player (and I tested it on 2 different ones) and I go to a the Country C and hit the "menu" button, I am suddenly transfered to Country A. And if I go from the main menu to Country D and I hit the "menu" button, I go to... Country A. The menu button seems to be linked to the first submenu. Which is very odd!
So there is definately something going very wrong when using the menu/title buttons during playback when I am in a submenu (not while playing a track).
Can someone help me? Is there a way to define what happens with the remote control buttons menu or title when you are in a submenu and NOT playing a track? I can not find any controls for that.
Thanks!

Does this mean I should select "not set" in the general tab at the dropdown menu's for Title, Menu and Return in the Remote Control section? I can't find any other place where I can select menu or title.
But if I set these to "not set",the menu and title buttons still work in simulation mode... So I guess I should do something else in order to disable menu and title? Sorry for the amount of questions from my side!

Drop-down menu on dialog windows causes applications to crash

Hi,
My applications have started crashing when I use the Open and Save dialogs. I haven't installed any new applications, but my MBP crashed last night when shutting down, so that might have something to do with it.
For example, if I'm using Office 2004 and choose [Open..] then try to locate a folder using the lower of the two drop-down menus (the one which defaults to 'Microsoft'), the program freezes for a second or so, then crashes with a 'Report Problem for Word' error window. The same problem occurs on all of my applications.
If I choose [Open..] and try to locate a file using the disk icons on the left-hand side of the dialog, then click on folders to burrow down into the computer, the dialog works quite normally.
I've reapplied the 10.4.10 update but that didn't produce a fix. I've fixed permissions, cleared caches and done the usual things, but nothing seems to fix it.
I then created a new user account and tried performing the same actions, this time everything worked as expected. So it looks like there is a preference in my personal user account somewhere that has become corrupted. But I have no clue what it could be.
Does anyone have a clue how to fix this?
Many thanks,
Mike.

See the steps I posted for resolving conflicts/corrupt plists within an account at:
http://discussions.apple.com/thread.jspa?messageID=4703015

Sasl and LDAP authentification for application

Dear MAC administrators,
I would like to ask how to set sasl to authentificate
against openLDAP for and svnserve application
A) LDAP works well on MAC and slack as well
ldapsearch -x -h ldap.stuba.sk -b "ou=People,dc=stuba, dc=sk" -W -D
"uid=fodrek,ou=People,dc=stuba,dc=sk" uid=*fodrek*|egrep employ
Enter LDAP Password:
employeeType: staff
employeeType: ext
employeeType: ext
employeeType: student
employeeType: staff
B) saslauthd -c -m /var/runsaslauthd -d -a ldap
shows
saslauthd : set_auth_mech: unknown mechanism: ldap
Is there anobody who is able to tell me where am I doing an error, plase?
I look forward hearingf from you
Yours faithfully
Peter Fodrek

What thype of ldap server are you using? Microsoft Windows 2012 or 2008. I got a problem with 2012 not give the groups back with some users.
Same problem as
https://supportforums.cisco.com/message/3866327#3866327
debug ldap 255
shows correct value with one user that is workin:
[196] Authentication successful for Administrator to 192.168.20.80
[196] Retrieved User Attributes:
[196]   objectClass: value = top
[196]   objectClass: value = person
[196]   objectClass: value = organizationalPerson
[196]   objectClass: value = user
[196]   cn: value = Administrator
[196]   description: value = Vordefiniertes Konto f..r die Verwaltung des Computers bzw. der Dom..ne
[196]   distinguishedName: value = CN=Administrator,CN=Users,DC=xxxx,DC=local
[196]   instanceType: value = 4
[196]   whenCreated: value = 20081201134058.0Z
[196]   whenChanged: value = 20131126141559.0Z
[196]   displayName: value = Administrator
[196]   uSNCreated: value = 12298
[196]   memberOf: value = CN=G_SSLVPN,OU=Service,OU=Groups,OU=XXXXX,DC=XXXX,DC=local
[196]           mapped to Group-Policy: value = ssl_admin
[196]           mapped to LDAP-Class: value = ssl_admin
One user that is not working:
no entries with memberOf in debug
[190] Authentication successful for sdag to 192.168.20.80
[190] Retrieved User Attributes:
[190]   objectClass: value = top
[190]   objectClass: value = person
[190]   objectClass: value = organizationalPerson
[190]   objectClass: value = user
[190]   cn: value = sdag
[190]   distinguishedName: value = CN=sdag,OU=Lieferanten,OU=Users,OU=xxxx,DC=xxxxxx,DC=local
[190]   displayName: value = sdag
[190]   homeMTA: value = CN=Microsoft MTA,CN=SRVSBS01,CN=Servers,CN=erste administrative gruppe,CN=Admini
[190]   proxyAddresses: value = smtp:sdag@xxxx
[190]   proxyAddresses: value = SMTP:sdag@xxxxx

Buying and installing Windows for a new MacBook

(1) What version of Windows OS would be best for the 13" 80 GB MacBook I just bought? After looking on the MS website, I'm confused about whether Vista has replaced XP or whether it's still in Beta (or even actually exists yet).
(2) Any tips on installing Windows on the MacBook? And should I hold off installing Parallels until I know Windows runs okay with BootCamp, or does it not matter how I set up Windows/Parallels?
(3) If I want to use MS Office on the Windows platform, do I have to get MS Office for Windows (XP, Vista, or whatever)? Or does Word 2004 for Mac somehow magically work with Windows?
Thanks for any advice on all this.

Thanks, Jim; that's encouraging. The person I'll be sharing the computer with thought we should have Windows, so I convinced him that we should get another Mac and then I would just install Windows. Still, it will probably just lie around gathering dust, since Mac is so much more stable and so much easier.
One last question: I saw from another post that it's unlikely that Windows running on a Mac would be infected by a virus, and I assume that a Windows virus wouldn't affect the Mac platform even on the same computer.
However, just as a theoretical problem: If a hacker did succeed in hacking into a Windows computer (that's on dial-up), could he get into the Mac area, too? Just curious.

Spry menu and target window

I have made a html document in Dreamweaver with a pre-defined layout: 2 column fixed, left sidebar, header and footer and inserted a spry menu in the <div class="sidebar1">. I would like the links to open in the main window <div class="content">, but my links open in new windows. I have tried to put in a target-tag "_self", but it doesn't seem to work. Any ideas how I get my links to show in the right frame?
Part of the code:
<div class="container">
<div class="header"></div>
<div class="sidebar1">
<ul id="MenuBar1" class="MenuBarVertical">
<li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
<ul>
<li><a href="#">Item 1.2</a></li>
</ul>
</div>
<div class="content">
/Mette

Hi Pam,
Please take care of the following
Upgrade to Spry version 1.6.1. This can easily be done using the Spry Updater that can be found here
Upload all Spry files to the server. At this moment there is no SpryMenuBar.js on the server
After that, if the problem has not been eliminated, please come back here.
Ben

Apple and its choices for Applications

Hello
I'm a little curious about the way tha Apple make a choice to accept ou refuse un application on itune store.
For example, why "swine flu detector" exist in "medecine" section ? It's an awful application, useful, and dangerous !
And it's not the worst !
I don't understand...

No one here would be able to answer that question as we are all just your fellow users. I also suspect that Apple will never give you a definitive answer. From what I have observed, as long as it isn't illegal or obscene, Apple lets it go up.
If you check out the information on the Apple Developer Connection pages, there are probably submission guidelines.
Best of luck.

ADF Faces and multiframe window for master/detail view

Hi,
I have a web page divide into 2 frames : frame1, the master view and frame2 the detail view.
When I load the whole web page, the master frame print all the paginated list. Each row has a "show more" button. When I click one, the corresponding detail view is displayed in the detail view (frame2). And, when I clicked again the "show more" button, the paginated list (present in the master view) is displayed in the detail view !!! WHY ??
When I click a third time on the "show more" button, the detail view display the corresponding detail information (work well like first click)....and alternatively clicking on the "show more" button, this problems occurs.
Where does this problem come from ?
The ADF Faces code shown in the master view (targetFrame attribute means to display on the detail view when show more button is clicked).
<?xml version="1.0" encoding="iso-8859-1"?>

<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="1.2"
     xmlns:f="http://java.sun.com/jsf/core"
     xmlns:h="http://java.sun.com/jsf/html"
     xmlns:afh="http://xmlns.oracle.com/adf/faces/html"
     xmlns:af="http://xmlns.oracle.com/adf/faces">
     <jsp:directive.page contentType="text/html;charset=utf-8" />
     <f:view >
          <af:document title="List of buildings" >
               <af:form >
                    <af:panelPage title="Show the list of buildings">
                         <af:table var="building" value="#{buildingsBean.buildingsList}">
                              <af:column>
                                   <af:outputText value="#{building.name}" />
                              </af:column>
                              <af:column>
                                   <af:outputText value="#{building.objectId}" />
                              </af:column>
                              <af:column>
                                   <af:commandButton text="Show more"
                                        action="#{adfMasterSlaveBackingBean.showBuilding}" >
                                   </af:commandButton>
                              </af:column>
                         </af:table>
                    </af:panelPage>
               </af:form>
          </af:document>
     </f:view>
</jsp:root>

Yes I put a targetFrame (I forgot to restablish it).
Code of the backing bean (to show building list) :
public List getBuildingsList() throws Exception {
          System.out.println("getBuildings");
          CLPNetworkInstanceAPI netAPI = CLPNetworkInstanceAPI.getNetworkInstanceAPI();
          buildingsList.clear();
try {
     CTResource resources[] = netAPI.fetchAllResourcesByType("CLPRMBuilding");
               for (int i=0; i<resources.length;i++)
                    buildingsList.add(resources);
          } catch (CTConnectionException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (CTUnsupportedTypeException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return buildingsList;
and the backing bean to show building detail :
public String showBuilding() {
          FacesContext context = FacesContext.getCurrentInstance();
          CLPRMBuilding building = (CLPRMBuilding)
     context.getApplication().getVariableResolver().resolveVariable(context, "building");
     if (building == null)
     return "error";
     AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
     afContext.getProcessScope().put("buildingDetail", building);
     return "showBuilding";

UDF for Exchange Rates and Indexes window

It would be great to have an additional field in the Exchange Rates and Indexes window for every currency to store string title of the exchange rate table from a national bank. It could be also satisfied by allowing to create an UDF for this window. In Poland this is a tax law requirement.

Hi,
Kindly check if your issue relates to Note No. : [1088683|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1088683] or not.
Kind Regards,
Jitin
SAP Business One Forum Team

No menu and no window for application

Similar Messages

Maybe you are looking for