"No message for message #1070201"

I just noticed that when I click "database information" and select the "run time" tab, under the "parameter" field, each line says "No message for message #xxxxxxx". The "value" field does have values; its just th parameter field that seems messed up.Anyone know why this is happening? I am on v6.5.3 uxThanks for any help.

The first message is:<br><br>##1070122 Hit ratio on index cache<br><br><br>which obviously should be the text in that list. It looks to me like the application can't read the message database. I would recommend reinstalling app manager as a first line of attack.

Similar Messages

  • Cannot sync, error message "could not be read" for an iPod no longer in use

    I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
      Windows XP  

    Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
    It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
    Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Error message: "playlists selected for updating no longer exist"

    I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
    "Cannot be updated because all of the playlists selected for updating no longer exist."
    I haven't been able to highlight which playlists are selected to begin with.
    I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
    Then I tried re-setting my ipod. So now I have nothing on my ipod.
    I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
    How do I "select" and "unselect" playlists so I can get up and running again?

    Here you go.
    http://discussions.apple.com/thread.jspa?messageID=607312&#607312

  • Hi, I was trying to copy and paste a lot of  info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

    Need help for trying to unfreeze a message on my ical.  I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error.  All of my info was below the message.  I can't get that message to go away or work on the ical now at all.  I try to force quit ical and have shut down the computer and it still comes up.  Any suggestions?

    K,
    Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
    Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

  • I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

    I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open.  I received an error message saying they are improperly downloaded or came as an email attachement which is not the case.  Please advise

    They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen.  I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
    I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
    doc.
    The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
    The reader version is I believe the most current, I always update when prompted.  OS is Windows 8

  • I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

    I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year.  I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".  I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service.  Is there something I should do to my IPAD?  I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions).  I don't know what to do next. My IOS version is 6.1.3.  I did go into Network from the general tab and I see it says "SIM not provisioned".    HELP and Thank you in advance.

    Hello Theresa818,
    Thank you for using Apple Support Communities!
    It sounds like the cellular data will not activate for some reason on the iPad.
    I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
    Check for a carrier settings update.
    Update your iPad.
    Toggle the Cellular Data setting off and on under Settings > Cellular Data.
    Restart your iPad.
    Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
    Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPad as new.
    If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
    I know you may have done one or two of the steps here, so you can skip those.
    Take care,
    Sterling

  • Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

    Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

    Go to the support site for the provider of the MRI software.
    Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
    I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

  • Can't get itunes.  I get the following message when I click on either the shortcut or the program.  It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

    When I click on the itunes shortcut or the program  I get the following message:
    ITunes has stopped working.  My two options are:  Windows can check on line for a solution to the problem or close the program. 
    It seems that my entire library is not there.  If I sync my ipod will it add it back into my library on the computer? 
    I've even tried installing again and nothing works.  Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
    Thanks

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • How do I set an e-mail account as default for new messages?

    I have two different e-mail accounts set up on my iphone. I want to be able to use the e-mail view that includes messages from all accounts/inboxes. When I am in that view and create a new message, my iphone will automatically select one of my accounts. It is unfortunately not the one I most often want to use. I don't find a way to change that setting - but I am sure it is possible! How do I do it... Thanks!

    No I don't have that option. I can see the corresponding option for calendars so I understand where it should be - but it isn't there. It's as if the account set up by mobileiron is disregarded and the system only thinks I have one account. But still - the mobileiron account is listed right there....
    If there isn't a simple solution that I had missed I guess this looks to be a bug, right? How would I report such....?
    Thanks
    Joakim

  • Upgraded to IOS 8.  iMessage has changed for the worse, losing messages now.  How can I force iMessage to use SMS for some contacts?

    SMS works well and is generally free for most plans here.  I'd like to be able to send messages via SMS from my iPhone for many of these contacts because something changed in IOS 8 iMessage and now iMessages seem to get lost.   Plus as before they can end up in multiple threads.  This latter issue seems to be worse as well with iOS8 but not sure why. 
    For example one friend set up an iPad with her apple ID and subsequently gave it to her son.  She also has an iPhone. I've been exchanging iMessage/SMS's with her which worked fine until the upgrade.  Then she stopped getting my messages on her iPhone.  Turns out that they were landing on the iPad.  While it may be that she doesn't have things sorted correctly on her iPhone that doesn't change the fact that prior to iOS8 she could get my messages.  So I'd like to designate her and a number of other contacts as SMS only.
    Additionally I am seeing more multiple threads from the same contacts.  Not sure why but it seems to have something to do with iOS 8 sucking in additional email addresses, e.g. @icloud.com and subsequently using these in some messages even though the contact is the same person.  I've tried adding the new email address into the contact card I have on file for that person and this simply resulted in two threads with the same contact name.
    Really what is up with this and why does Messages need to keep track of all this info?  The only requirement to direct a message between to iDevices should be valid Apple ID's on both with a means to reference this (Phone Number, Apple ID Email Address) in the respective contact.  In the absence of this the message should be sent as SMS.

    I have the same problem on iOS 7.0.3. With one particular friend I receive iMessages from her just fine and I can send her iMessages from Mac OS X and Messages on iPad, but Messages on my iPhone keep sending her my messages as Text messages. I send iMessages just fine from the same iPhone. SFChuch, what ios version is your recipient using? Did they sign up on iCloud? I wonder if the problem happens with recipients who are not properly registered on iCloud or some special case like that.

  • HT201342 we only have one apple id for our household.  i would like to use icloud to manage all our email accounts within our household. i currently use gmail.  is there a way to continue to use gmail and have messages routed through icloud so no change i

    i am new to icloud.  i would like to manage all our household email accounts through icloud.  i currently use gmail.  is there a way to route all gmail messages through an icloud email so i do not have to change my email address?  also how do i create multiple email accounts using the same apple id?
    thanks all.
    Mike

    No, iCloud does not handle 3rd party mail, and Google can already sync to all your devices without any help.
    iCloud accounts are individual, there is no 'Family' account. Open an account for each user, each will have an iCloud address.

  • I have one Apple ID for several people but do I do not want the others to pick my number to receive my messages

    When I go to Messages I can select any number or e-mail address to recive their text how do I stop this?

    You can all share the same Apple ID for the iTunes store and app purchases, but each have a different AppleID that you use for the iCloud services including iMessaging.

  • How do I set up different icloud accounts for each family member and make them able to access them on our common mac using their user name on the mac.  I am doing this to make sure kids don't get access to our messages.

    We have several apple products in the family.  I would like to set up different icloud accounts for each memeber.  I lately noticed having activated different devices with same icloud account that each device can access everyones messages by going in their settings and clicking which number or email they want to use to see messages.  Let me make sure I am understood, on my sons ipod in his messages settings he can switch to my cell number and see all my messages.  Re setting the devices isn't my great issue but can i set up each kids user account on my mac to their individual icloud accounts?
    Thanks!

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

  • Where on the Apple website  do I go to get a separate iCloud account for my wife so we can keep our text messages separate?

    Both wife and I now have Iphones.  Were on the Apple website do I go to get her, her own icloud account/email etc.  I want to keep the itunes apple ID the same sso we can share purchases, just dont need to see all her messages?

    On her iPhone. Settings>Mail, Contacts, Calendar>Add Account>iCloud>Get A Free Apple ID.
    Use this ID for iCloud, iMessage, and FaceTime on her iPhone. Keep your ID in Settings>iTunes and App Stores on both iPhones.

Maybe you are looking for