No Message in BPM

Hi experts,
due to a mistake I had an endless loop in my bpm. Finally the process end without any doing of me.
But now the BPM is not working. I can start the start the process ( Communications Channel works fine and shows the last action ), but there are no messages now.
Is there position, where I can have look?
Regards
Mathias

Hi,
Can you edit , save and activate the BPM  once  again and try out the  flow of messages again. mean time try to clear the cache too
Regards
Agasthuri Doss

Similar Messages

  • Collect messages in BPM

    Hi experts,
    Need to create one scenario to collect payload of XML files, I have done this work in Design and Configuration :
    data types : test_collect
    Message Types : test_collect
    Message Interfaces :  Test_collect_1 (abs asy),  Test_collect_2 (abs asy)
    I need to collect Test_collect_1 and pass it to Test_collect_2
    Message Mapping : Test_collect_1 - Test_collect_1
    Interface Mapping :  Test_colect_1 - Test_collect_2
    Integration Process is created as example in Standard Process in SAP BASIS
    --> http://sap.com/xi/XI/System/Patters --> BpmPatternCollectPayload
    Need to created more mappings or not.
    How I will created proper Configuration Steps,
    mean no. of Sender Agreements, receiver agreements, Receiver Determinations and Interface Determinations etc.
    Regards,
    Study SAP

    hi study sap,
    check the below blogs to have a cleat understanding
    Check these
    BPM:
    Walkthrough with BPM - Walk through BPM
    BPM in XI https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
    BPM-1 Walkthrough with BPM
    BPM-2 Reconciliation of Messages in BPM
    BPM-3 RFC Scenario using BPM --Starter Kit
    BPM-4 The specified item was not found.
    Schedule BPM Schedule Your BPM
    Use of Synch - Asynch bridge in ccBPM Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
    Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
    without BPM Sync/Async scenarios without BPM
    without BPM1 Sync/Async communication in JMS adapter without BPM (SP19)
    IDOC BPM IDOCs (Multiple Types) Collection in BPM
    multimapping without BPM /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible---- Multi Map With out BPM
    Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI. Various multi-mappings and
    Optimizing their Implementation in Integration Processes (BPM) in XI.
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure --- Illustration of Multi-Mapping
    and Message Split using BPM in SAP Exchange Infrastructure
    IDOCs (Multiple Types) Collection in BPM (N:1 Mapping )
    regards
    kummari

  • Stateful messages in BPM(Urgent)

    hi,
    BPM is used for handelling stateful messages.But what is the maximum no. of messages it can handle,without reducing the performance.

    Hi,
    Business Process Management provides SAP Exchange Infrastructure with functions for stateful message processing: The status of an integration process is persisted on the Integration Server. This means that you can specify how long an integration process must wait for further messages to arrive, for example. Furthermore, this enables you to process messages within an integration process further still; for example, you can collect certain messages and then send them in a particular order.
    For Performance fine tunning avaoid having message mapping inside BPM,do it either before the BPM or after BPM
    BPM is used for Stateful communications,suppose u have to delay message processing,or wait for other messages to arrive and then semd them all together,in that case use BPM.
    go thru this: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    Performance is not only depend on the usage of BPM, it also depends on the message volume inside the BPM. So it depends on the memory size, message size i.e payload size , design , mapping used etc
    This basically means SAP XI as a EAI tool without the BPM provides stateless message. this means that one message coming in SAP is not dependtent on another message.
    BPM in SAP XI is used to make messages stateful and this allows us to do functionalities like collecting message , splitting message, waiting for a message etc.

  • Emulate Fault message in BPM

    Hello
    I have read all related topics
    fault message in BPM process
    Alert monitoring and fault message types
    Using Fault Message Type in BPM
    but no answer..
    I have synch BPM that send synch request to RFC and a mapping step. Then I have to catch exception (of send step or mapping) and send fault message in exception handler.
    I haven't a proxy. I want to create fault message manually and send it. Is it possible? I cannot create an interface of fault message type.

    Hi Sergey,
    As far as I know, it's possible to catch the mapping/send exception.
    It's also easy to define an exception branch for this exception, and inside the exception branch, send a "normal" message in a send step.
    However, as far as I know there's no way of specifying a BPM send step that sends a fault message.
    At least in my experience, regular messages are just as useful when sending error information.
    Cheers,
    Ofer

  • Collection of messages in BPM

    Hi Experts,
    Collection of messages in BPM is not working,IP is executing for each Idoc.Actually i have done the sceanrio Idoc to File,Here I am getting multiple IDocs of same type from R3 when run a transaction and i would be generate a single file for all the IDocs.For this i have changed the occurence of Idoc from 1..1 to 1..unbounded and done the mapping betweeen these two. i have done bpm just like as standarad bpm pattern "BpmPatternCollectTime".I mentioned the time as 1 minute.in transformation step i had mentioned interface mapping for 1..1 Idoc to 1..unbounded Idoc and the real mapping conditions of this sceanrio is carried out after the bpm. The Idoc's are generating from R3 with the time diffrence of 3 secs.So it should generating a single file what ever the no.of idocs populating within a minute.
    In monitoring it showning for bpm, its trigerring for each incoming Idoc and procesing successfully.
    For Ex: Two idocs are coming from R3 then BPM triggers twice
    What could be the possible reasons for this or i have done any thing wrong.
    Any ideas.., Thanks in advance
    Cheers
    Tiger Woods.

    HI,
    Try to Use Idoc packaging. also see the below links
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    Regards
    Chilla

  • Multiple files, same structure into one message without BPM

    Hi,
    Is it possible to read multiple files (each with single row) as one message without BPM by some configuration in channel?
    For example:
    input files placed simultaneously in input folder:
    file1: a,b,c
    file2: f,g,h
    file3: k,l,m
    after adapter picks files, xml message:
    <Message_type>
        <RecordSet>
            <file>
                 <A>a</A>
                 <B>b</B>
                 <C>c</C>
            </file>
            <file>
                 <A>f</A>
                 <B>g</B>
                 <C>h</C>
            </file>
            <file>
                 <A>k</A>
                 <B>l</B>
                 <C>m</C>
            </file>
         </RecordSet>
    </Message_type>

    Bond,
    Yes Bond. You can read the pattern what you have given.
    First Read the whole line in the file as one record. Now take the substring or write udf in mapping. This entirely depends upon your requirement.
    Regards,
    ---Satish

  • How to split messages without using Message split (BPM)

    In file to file scenario how to split messages coming from file without using Message split (BPM)

    Thank you very much.

  • Order of Message in BPM

    Hi guys, i got a question regarding BPM. Does BPM will retain the sequential order of a message?
    For example I am calling a storedprocedure oracle (via jdbc adapter) synchronously.
    My message will contain 4 rows in sequential order 1 2 3 4. The stored procedure will return a value to XI (BPM) for each row (that is A B C D).
    Does the return from the storedprocedure is also in the order of my message from BPM, that is:
    For row 1, i will get an A for the return.
    For row 2, i will get an B for the return.
    For row 3, i will get an C for the return.
    For row 4, i will get an D for the return.
    Does anyone know about how XI (BPM) handle this?
    I really appreciate any solution and input from you guys. Thank you very much in advance.

    Wishnu
    Are you sending all the rows in one instance ( Single XML file ) or in different 4 XMl files.
    If they are in different XML files than you have to use the Correlation, to assign messages that belong together to the same process instance.
    - Lalit -

  • How to monitor message in BPM?

    Hi all
    I try to find in forums but I did not find. Could you please to guide me how I can to see message content in each step in BPM.
    Thanks and Regards
    Park

    Hi park,
    To monitor messages for BPM... got transaction SXMB_MONI_BPE
    there u can check each step.....
    hey... check the slide....also useful......
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
    Regards
    Biplab
    <i>Reward with point if useful</i>

  • Reg: Message and BPM

    Hi
    I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
    Pls let me know the corrective step.
    reg: Prabhu

    Hi,
    1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
    2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
    4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
    Hope this helps,
    Regards,
    Moorthy

  • Report Error Message in BPM Alert?

    Hi,
    I designed a BPM with a transformation step and a send step. For each step I have an exception branch where I want to trigger an alert, when something goes wrong.
    I already configured in TC ALRTCATDEF an alert category (Dynamic Text activated). And I made an container operatinon with folloing control step, where I for example report the message ID.
    But, going through the blogs and threads I didn't find the information, how I can report the exact error message, the error category (and in case of the send step the adapter and the adapter error text) to the alert. How can I get this data to put it into a container variable?
    Can anybody give me some information about that?
    Thanks in advance
    Dominic
    System: PI 7.0 SP15

    You can use the below information for raising an Alert for adapters.
    Specific Error Information from the Adapter Engine:
    Container Element
    ABAP Dictionary Data Type
    Meaning
    SXMS_TO_ADAPTER_TYPE
    CHAR70
    Adapter type
    SXMS_TO_ADAPTER_ERRTXT
    CHAR70
    Error text from the Adapter Engine
    Refer the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

  • How to Multi-Map N:1 messages in BPM when N is unknown

    I need to perform an N:1 message mapping in a transformation in an Integration Process. SAP Documentation explains how to do this:
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm|http://help.sap.com/erp2005_ehp_03/helpdata/EN/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm]
    But it seems to be the case that the first message of the source will be contained in a <Message1> </Message1> element pair, the next message in <Message2> </Message2> element pair, etc.
    So what do I do in the case of a variable number of input message that get mapped to one message? I don't know how many messages will be coming in before the mapping needs to be done; it depends upon how many messages are sent out in a fixed time interval.
    I will be using an ABAP XSLT transform to do this. I cannot use a
    <xsl:for-each select="Message">
    Kind of construct because each message is enclosed by a different <MessageN> element.
    This must be a problem that has come up before. Can anybody please point me to the solution?
    Kind Regards,
    Tony.
    Edited by: Anthony Bateman on Mar 23, 2008 9:31 PM

    Hi Anthony,
    Yes you can perform N:1 message mapping using BPM by just using a "wait" step. Its very simple. The "wait" step waits for a particular time period or scheduled time(like  25th March 10:00 PM).
    If only "collection of input messages for a particular time interval" is your concern, then I think you can just do it with a simple BPM and no need of ABAP XSLT maaping. It can done by a simple Message mapping itself.
    I can send you screenshot of a sample BPM which does this work on your mail Id if you are interested. Plz provide your email ID.
    If I havent understood your Qn properly, plz do inform.
    U can refer,
    /thread/186475 [original link is broken]
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm
    Thanks,
    Shobha

  • Handling SOAP Fault messages in BPM

    Hi,
    My scenario is Sync-Async Bridge involving File to SOAP transformation. I have used BPM as 1 file has many records and each record is required to call the web service synchronously.
    In the BPM I have
    Receive ---> Transform (1:n multimapping ) -
    > Block (Par for Each)
    In Block  I have Send Sync step to call Web service . I have an exception branch for the send step for catching Fault message that is sent back from webservice for Application Fault.
    Problem:
    Though the Fault message is sent from web service ,in the BPM  the block goes in error saying : "No exception defined for fault message ".  The Exception brach is not executed.
    Please suggest if anyone has come across such a scenario and solution to this.

    hi satesh
    using "exception handler" in BPM we can handle the error messages
    regards
    kummari

  • Handling fault messages in BPM

    Hi,
    I am using BPM for a RFC to SOAP scenario to handle Fault messages. (Please have a look at my previous post also SOAP Fault message )
    I have created an exception block in BPM to catch the fault message from SOAP service. Inside the exception block i need to map the fault message to RFC response. But fault message is not accessible in Exception block.
    Let me know if you have any idea to solve this.
    Thanks,
    Uma

    Uma:
    Let me make clear the requiremt. You have RFC Import(aka Request message) and Export(aka Response + Exception) and you have Web Service with Request, Response, Fault messages. And you want to send the fault messages back to the RFC in addition to the response. I was wondering, If we do the following mapping without BPM, does that fulfill your requirement.
    RFC-Import <----
    > SOAP Request
    RFC-Export <----
    > SOAP Response
    RFC-Export <----
    > SOAP Fault
    Can you let me know if you face any problems with this one. I have seen your other thread and was wondering, whats the problem is. May be I didn't understand the requirement properly. Please clarify me

  • Catch mapping error message in BPM Exception branch

    Hi dudes,
    Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
    Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
    Many thanks in advance!
    Paco

    Thanks,
    My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
    I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
    Message Class: SAI_MAPPING
    Message Number: 217
    Message Type: E
    Message Variable: com/sap/xi/tf/_<MM name>
    Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
    Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
    The text in bold is the one I am interested in to be get and mapped into the exception branch.

  • Using Error Message in BPM Error Handling Branch

    Hello,
    I closed the old BPM thread not to mix up different questions.
    As I found out now a synchronous Send Step with Eror handling branch is working fine to directly handle errors.
    As in the send step there could be several errors possible, e.g. XML validation fails, error in communication channel etc.
    Is it possible to have access to the error message that can be seen in monitoring and use this as input parameter for message mapping for example?
    Would be helpful because otherwise I just would be able to send back a generic error message to the sender.

    Hii Florian,
    Adapter module can only provide information about the failures in Adapters.
    But other failures like XML Validations, can be informed depending on the mode of Validation.
    As per help.sap.com
    You can perform the structure check at the following points in PI message processing:
    ●      Validation in the sender adapter
    If the sender adapter has created the PI message, you can then perform the validation of the PI payload. If the structure of the payload differs from the definition of the data type provided for comparison, message processing is stopped. The adapter sends a synchronous response to the sender of the message, informing it about the structure error. The industry-specific adapters inform the sender asynchronously, as required by the RNIF protocol and the CIDX protocol.
    ●      Validation in the Integration Engine
    In inbound and outbound processing, *validation of the PI message payload takes place as a pipeline step *of the Integration Engine. If the structure of the message payload does not match the saved definition of the data type, an error description is generated. The error description contains status information and a list of all structure errors. Message processing is stopped. The message is set to error status and an error report is saved.
    If validation takes place in the Integration Engine, the sender of the message is not automatically informed of the structure error. The message is set to error status and an administrator can process the message further using the Runtime Workbench.
    So if you use XML Validation in Sender Adapter you can get back the Exception ( i think you need to do some java mapping here). Else if you are using Integration Engine, then alerts are there for them.
    Anyway this discussion has opened a lot of To Be Explored area for me. I will keep looking for them.
    Regards
    Suraj

Maybe you are looking for