No Message: InfoCube Update Completed

BW Gurus,
I trying to load Data from PSA to the Cube Using DTP...during the data load, for certain data package the data load is keep on going and there is no error message as such and its still yellow status and under the "Updating to InfoCube ZXX_XX" node ,after the "Write to fact Table tasks "..
There is a message saying "No Message: InfoCube Update Completed" could anyone help what is the cause for this issue and also fix ? is it a problem with the amount of data load ?
Thanks,
Raman

I got below error in the ST22 dump....
"Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
Any help will be greatly appreciated...
Thanks,
Raman

Similar Messages

When I try to update Elements 9, I get an error message even though it appears to download the update completely. Why?

When I try to update Elements 9 I get an error message despite the fact that the update seems to download completely. Why?

Windows 7. Thanks, but why then do I get a downloading frame that seems
to indicate that it IS updating?
Mila and Bill
On 2014-12-12 14:44, Barbara B. wrote:
WHEN I TRY TO UPDATE ELEMENTS 9, I GET AN ERROR MESSAGE EVEN THOUGH IT APPEARS TO DOWNLOAD THE UPDATE COMPLETELY. WHY?
created by Barbara B. in Photoshop Elements - View the full discussion

HT201210 I tried to update my phone. It does not work at all now. I got the message Could not complete request. The network connection was reset. I have no phone. Please help

I tried to update to the new ios 7 today. I have no phone now. I got the message "could not complete request. The network connection was reset. What is happening. What do I do now?

Apple's servers are probably very busy. You may want to wait for a little while before trying again.

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

Error message: Could not complete your request because the file was not found.

Tonight tried to open images in Photoshop CC 2014. Could not open any. Received the message "Could not complete your request because the file was not found."
I installed latest updates yesterday. Today not working. Can anyone assist?

Well, then you do want your layered file back and the nice thing about Macs, Time Machine does keep hourly backups on your Mac. You should be able to enter Time Machine and restore that file.
I had hoped opening your file in another app might relase it so you could open it in PS.
Gene

Details Data in SAP BI could not be updated completely: see log

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

InfoPackage error message "Subsequent update (requests) : Status unknown "

After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown " and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
Thanks!
Luda

Hi,
Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
If possible let me know what is error message.
Regards,
Vishwa.

ITunes crashes with message to update. Update fails.

I have iTunes 7.7.1.11, which was running fine until a few weeks ago but now it crashes as soon as I start it, with a message to update the QuickTime software. This started even before iTunes 8 was available, and still occurs - with the result that I cannot upgrade to iTunes 8. Here's everything that I have tried:
*1. Double-clicked on QuickTime shortcut*
-> Got dialog-box with 2 buttons - "Cancel" and "Do It Now" - and a message saying: "Some of your QuickTime software is out of date. You can fix this problem by updating to the latest version."
-> Also, simultaneously i.e. while the above dialog box is still open, the MS Windows dialog reporting a crash also comes up.
*2. Ran Apple Software Update*
-> Got dialog-box saying: "Your software is up-to-date."
*3. Downloaded latest QuickTime installer (7.5 for Windows) from Apple site and ran it*
-> Because QuickTime was already installed, I was presented with 2 options: Repair or Remove. Clicked on Repair.
-> Seemed to go through the installation process successfully.
*4. Again double-clicked on QuickTime shortcut*
-> Again, same result as earlier.
*5. Uninstalled QuickTime by running the installer and selecting Remove*
-> After going through the uninstall steps, saw the following status message in the uninstall progess bar/status window:
"Rolling back action: QuickTimeUnInstallMSIProc_rollback"
-> After this, the process completed with this message in the "QuickTime Installer Completed" dialog:
"The installer encountered errors before the requested operations for QuickTime could be completed. To retry these operations at a later time, please run the installer again. Click Finish to exit the installer."
-> There was no other option but to click Finish.
*6. Ran the QuickTime installer again*
-> Again, only 2 options: Repair or Remove (as in step 3). No Install option.
So, now, I can repeat steps 3-6 again and again, but it is status quo. And, now that iTunes 8 is available, when I try to update iTunes, the download is fine but then it says "An error occurred while installing ..."
Any suggestions/tips welcome.
- Ajoy

followed the excellent instructions from turingtest2, london, uk message of 1-31-2014. everything is working perfectly. .

I am getting error message for updating my I pad

I am getting error message for updating my I pad

And what is the error message ? Are you on iTunes 10.5+ on your computer ? If you are getting a network timeout message then try temporarily turning off all your firewall and antivirus software until the download has completed.

Anyone know how to fix error message: word cannot complete too many files open

anyone know how to fix error message: word cannot complete too many files open
thanks
Ronny

First, take a look at this thread, toward the end of the second page:
https://discussions.apple.com/thread/1449787?start=0&tstart=0
Your ansswer is there, somewhere.
Unfortunately, you've not provided enough system information to solve this.(The only info is that you use a MacBook Pro.) This issue may have been addressed in a prior version. Update your Support Communitees Profile to include your current hardware, system, and devices.

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

No Message: InfoCube Update Completed

Similar Messages

Maybe you are looking for