No messages displayed in SXMB_MONI

Hi experts,
I am unable to view messages in sxmb_moni. However, when I do Communication channel monitoring through RWB; I can see the message; "Message processing completed successfully" .
Kindly help me find a solution for the same.
Thanks and Regards,
Neha

hi,
Please follow the steps below to see the synchronous messages in sxmb_moni
Step 1. Go to transaction SXMB_ADM
Step 2. Click on Integration engine configuration
Step 3.Go to Edit - Change specific configuration data
Step 4. Add the paramaters:
LOGGING and LOGGING_SYNC category RUNTIME current value = 1 (active)
PS: You can also set TRACE_LEVEL to 3 so that all processing steps and details will be logged
Check this blog too..
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Thanks,
Vijaya

Similar Messages

  • No messages displayed

    hi
    I have configured the sender file adapter which picks up the file from file adapter and is sending it successfully to integration server. But i am not able to
    see the messages in integration server using the transaction sxmb_moni. There are no messages at all.
    here i am giving the log of the sender file adapter. Plz suggest.
    i have used correct filters
    please advice
    thanks in advance

    I have  tested inthe configuration
    and found this
    1.
    Sender Agreement
    <Not found>
    <Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace>... (5 lines)
    Receiver Determination
    <Not found>
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xisxxxxx/sap/xi/simulation?sap-client= User: XIDIRUSER Check
    2. when I am logging into SXMB_MONI
    a.) execute monitor for xml messages
    I could not get into the display of message status
    "no messages available for selection"
    b.)processing statistics
    shows the no of errors but when i display the errors from this screen still the same message  "no messages available for selection"
    3. RWB i have set filters and also tried to display 'all' the messages but still
    it showed that 0 messages displayed
    In the Destinations I could not find the message or data
    while i am using ftp server to create my files and using NFS to send the file for
    1.file to file interface
    2.file to RFC interface( i checked in the RFC and found nodata)
    please advice on how can i c the payload and check the files in the targets.
    I have also set the trace levels inthe transaction sxmb_adm to 3 ..........
    stil the same
    Message was edited by: John

  • Text Message display on Curve 9360

    Hi...just got a new Curve 9360. The default text message display shows all messages i.e. if I've sent a text most recently that is what I see at the top. What I want it to do is show the SMS Inbox (which I can navigate to via the folder options, but I can't find a way to set it as a default). Can't work out how to do it either on the device or when connected to the PC. Any suggestions...?...R

    Do you mean that currently ALL of your email messages and SMS text messages are mixed in one folder when you view, and you want to see a folder on your homescreen of ONLY your SMS text messages? And your email messages in another folder?
    If so, on your device, open that Messages folder > press the Menu key > Options > Inbox Management and check the box on "Text Messages", and save. That will put an SMS Text message folder on your screen.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

    In Mail 3.6 remote images in HTML messages display as blue squares with ? even though checked in viewing references.

    Nurit,
    The point is that that button should not be there, if the preference setting is as you say. This indicates the preference setting is stuck, and that is what I was trying to help you resolve.
    The full purge is done as follows:
    Quit Mail, and in the Finder open Home/Library and locate the Mail folder. Control-click over the Mail folder, and choose Duplicate -- then drag the resulting copy to the Desktop for temporary backup. Next, open Home/Library/Preferences and find the com.apple.mail.plist file and drag it to the desktop.
    Relaunch Mail, which will open as though new, and when prompted to import anything DECLINE. Instead, re-enter your account info, and Mail will re-discover the account folders for your accounts, and all should be well, after setting preferences as you desire.
    Ask any needed questions, and keep us posted.
    Ernie

  • Huey Pro calibrator- error message  display measurement Error

    i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

    >a nice NVidia card... Please help Adobe!
    1a - what is the model nVidia card, and what is your driver version?
    1b - for instance, I have a GTX 285 and driver 296.10
    2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
    2b - how to contact Adobe...
    Adobe contact information
    http://www.adobe.com/support/contact
    In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7

  • Error message display for PO creation with reference to internal orders

    Sir,
    While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message  when Budget is exceeded.
    But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
    Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
    Regards,
    Srinivasa Murthy

    Hi Anupam,
    The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
    This error comes during PO creation Process and PO can not be saved. This error message display is correct.
    Item 001 Order 600643 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 001 Order 600643, budget  for fiscal year 2009 was exceeded by 99,960,000.00 INR.
    But  my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
    Regards,
    Srinivasa Murthy

  • While raising Leave Request on ESS: getting warning message displayed

    Hi All,
    When i am trying to raise a leave request from ESS i am getting the warning message displayed on the page  as follows:
    "Customizing for employee 00001153 does not exist"
    I want this message to be removed.
    Is this problem from R/3 end or any configuration needs to be done on ESS ?
    Pls let me know how to remove this message.
    Regards
    Vijay

    this message ensues when there is a missing customisation for the pernr, For example :
    message is being displayed due to rule group customizing is missing
    for a leave '0560' for which a leave record exists on the date
    '14th March 2008'.
      One possible solution would be to create a record in the customizing or delete the record from the application.
    So please check the customisation of the absences, Quotas, rule group etc for this particular employee

  • HT201210 When I try to update my iphone to the latest iphone software on my MacBook in itunes a message displays "This iphone cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable.

    Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers

    Try posting to the correct forum.
    This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
    Try posting to the iTunes for the Mac forum.

  • HT5704 after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

    after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

    There is no such thing as a "Factory Unlocked iPhone "
    They are either locked to a carrier who may at some stage offer unlocking
    or sold direct to a user by Apple (from their own Stores or online .)
    Those iPhones are NOT locked
    Where did you get your iPhone
    If from Apple try this
    http://support.apple.com/kb/HT1808

  • ERROR MESSAGE : display of the query spec is not allowed

    Hi all,
    I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
    Can anyone help me in understanding this issue?
    Thanks,
    Raj.

    Have you check your authorizaiton trace with ST01?
    You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

  • How to verify JavaScript alert message display on page with C#?

    Hi All,
    I have a question about verify the JavaScript alert message on page. For example, I input the script in browser address like: "javascript:onmouseover=alert('popup windows')" . How to verify there's a alert message displayed on page with C#?
    Thanks

    Are you trying to use some automation or ? What the previous solution is they have put the text in the dom for you to pull out with C# or other languages.
    if you are trying to automate this through a browser maybe look into WebDriver
    WebDriverWait wait = new WebDriverWait(driver, 2);
    wait.until(ExpectedConditions.alertIsPresent());
    Alert alert = driver.switchTo().alert(); var alertText = alert.Text;
    alert.accept();

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • HT2500 After my last software update I can no longer access my mail.  message displayed says "you have mail version 4.5 this cannot be used on  Mac OS X Version 10.6.8 .  How do I fix this???

    After my last software update I can no longer access my mail.  message displayed says "you have mail version 4.5 this cannot be used on  Mac OS X Version 10.6.8 .  How do I fix this???

    See possible fixes here.
    https://discussions.apple.com/message/19760703#19760703
    https://discussions.apple.com/thread/4311280?tstart=0
    https://discussions.apple.com/message/19710911#19710911
    Some have reported success simply by reinstalling the update.
    http://support.apple.com/kb/DL1586
    Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
    http://support.apple.com/kb/DL1399
    I'd suggest starting with the simplest of these fixes, so look them over first.

  • Document in BSEG but not in BKPF. Message displays Document not in Database

    Good day!
    We are using SAP 4.6C.
    Our client wants to display a document posted some time ago using FB03.
    The message displayed, "Document not in database. Search Document archive?"
    I looked for the document in BSEG and found that the document exists there.
    However, the document header data are missing in BKPF.
    Is there a transaction code that could have archived/removed the data in BKPF while
    not changing anything in BSEG?
    Could there be a way to retrieve these data?
    Thank you!

    Good Day !
    For your information, the pop up message prompting for archived mesages "Document is not in database. Search document archive? " is not present anymore in the release ECC 6.0. This pop existed in your release  and this has been phased out as part of continuous product improvement after inputs from various customers.
    In the newer releases instead of this pop up we have the message
    "Document XXXX XXXXXXXXX XXXX is already archived" being displayed at the lower bottom of the screen. This helps you identify that the document was archived. This is the standard SAP behaviour.
    Therefore, your document is archived. To able to retrieve this document again you can use Tcode FBL3N and change the Data source option (there is a button for that) to Archived Data.
    The same you achieve in FB03 when you select Document List button and then Data Sources Button, mark the option Archive.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Need to get the number of messages displayed

    Dear All,
    I need to know whether the message area is having any messages or not. If messages are there then i need to get the exact number of the messages. I found the count in the class CL_WDR_MESSAGE_AREA. But the count is the private attribute. Is there any methods available to get the count of the number of mesages.
    Thanks & Regards,
    Raghuram K.R.

    Hi raghuram
    below is the code snippet to get the count of message displayed ..
    other than this what is your looking for Exactly. pls be clear so that we can help you out .
    *   get message manager
      DATA lo_api_controller     TYPE REF TO if_wd_controller.
      DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
      DATA :lt_messages_mgr TYPE if_wd_message_manager=>ty_t_messages,
            lv_string1 TYPE string ,
            lv_string2 TYPE string,
            lv_count TYPE i .
    *Message Manager Reference  
      lo_api_controller ?= wd_this->wd_get_api( ).
      lo_message_manager = lo_api_controller->get_message_manager( ).
    *   report 2  message
      lv_string1 = lo_message_manager->report_success( message_text  = 'test 1').
      lv_string2 = lo_message_manager->report_success( message_text  = 'test 2').
    *  get the list of message
      lt_messages_mgr = lo_message_manager->get_messages( ).
    *  count the no of message
      DESCRIBE TABLE lt_messages_mgr LINES lv_count.
    Regards
    Chinnaiya P
    Edited by: chinnaiya pandiyan on Oct 19, 2011 1:17 PM

Maybe you are looking for