No messages for initial processing exist-- GR
i am trying to take print out for GR document
but getting the above said error message
these are the settings which i have already done
assigned user parameter NDR ,
created a condition record for message type wee1 thru MN21,NACE
chcked in the table TNAPR ....for and programe is coming there with output type please suggest
Edited by: Sap: IN on Jun 3, 2009 9:45 AM
Hi ,
The condition types are linked to procedure under the below path ;
SPRO Materials ManagementInventory Management and Physical InventoryOutput DeterminationMaintain Output Determination Procedures
Did you create a new message type or using the standard one "WE01 " .
As per my understanding Message determination of PO is never assigned to document type .
U only maintain condition records through document type .
Just check whether u were able to enter the message type manually and process the o/p.
If yes , then there might be a problem with ur condition records.
Regards
Ramesh Ch
Similar Messages
-
GR out put error :No messages for initial processing exist
Hi All
When Im process the out put for GR using T-Code MB90, the following message appears and I'm able to see the out put "No messages for initial processing exist".I have checked the three processing modes even it is giving the same mesaage.Can any body help to how to see the GR out put.
thanks and regards,
Sri.........Hi ,
I think the necessary condition records might not exist.
You can maintain the same using MN21.
Also check whether the necessary customising is done using Transaction NACE and by selecting application ME.
Regards
Ramesh Ch -
No messages for initial processing exist in MB90
Hi friends,
When i try to take print from MB90 the error "No messages for initial processing exist" for Goods receipt --> others MIGO.
I maintanin the Print controls in SPRO --> MM --> IM --> Print Control.
Please help me in this issue.
Regards,
MahiHi Anbalagan,
Thanks for your Reply.
Here MM consultant is now not available thats why i post question here.
Personally i check some forms are assigned to Material document. But i know some is to be configured. but i dont know what it is. If you know the procedures please guide me.
With Regards,
Mahi. -
VF31 : No messages for initial processing exist
Hi everybody,
I have a problem when i want to print an invoice from Tcode VF31
i enter the required fields and i excute but i have this message :
"No messages for initial processing exist".
in Tcode V/40 i had already the output type maintened.
Please how to solve that
I need ur help
Regards.Hello,
try to print it from VF02 transaction
BR Tarik -
No messages for initial processing exist
Hi All,
When I use Migo to post GR or GI, I use MB90 to print Output from Goods Movements but I receive a message "No messages for initial processing exist".
I must use MB02 to assigned document number to output form.
How can I set GR auto assign to form A, or GI auto assign to form B ?
Thanks !Check this answered link [No messages for initial processing exist |MB90 (Output from Goods Movements)]
-
VL74-No messages for initial processing exist
Hello All,
At the time of executing tcode VL74 i am getting the following message
No messages for initial processing exist
Message no. VN108
Could anyone please let me know what settings I need to maintain for the same, I have maintained the output type determination procedure and also maintained condition records for the same besides assigning output type in the required output procedure.
Kind Regards
Atul Keshav.Hello Atul,
You need to check 2 things:
- In TCode NACE, Application: V6-Handling Units, your output type should be active for Multiple issuing in General Data tab,
- In TCode VL74 overview. the input parameters for processing mode should be 2 - Repeat processing which 1 by default
Thanks & Regards
JP -
No messages for repeat processing exist
Hi All,
I have been trying to print Intercompany invoices via VF31 using the Output type ZB3I, but I keep getting the following message.
No messages for repeat processing exist
Message no. VN109
Plz guide me.
Regards,
MahavirProvide following the input screen for VF31
- Output Type
ZB3I
- Transmission Medium
1-Print output
- Processing mode
2-Repeat processing
and Billing Doc or range of billing doc to print.
Regards
JP -
"DD8x". Error message for loading process:Operating system error !
Using the OLE command I receive the following error:
Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
Operating system error <> !
strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
lsuccess = IDIACommand.CmdExecuteSync(strCommand)
I get the same error with the "DataLoadHdFile" command.
After the error happens, I cannot load any files in the directory until I
reboot DIAdem.Hi punkmonkey,
I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
When you get the same error with
the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
FM to create support message for custom process type other than 'SLFN'
Hi All
Is there any function module or BAPI which will create support message for the custom process type other than SLFN.
BAPI_NOTIFICATION_CREATE is posting only for the process type 'SLFN'
Thanks in advance
Regards
RaviAny ideas?
-
Help in forming SOAP message for Bpel process
Hi,
I have a following schema file - UnpackMessage.xsd
<?xml version="1.0" encoding="windows-1252"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.w3.org/2001/XMLSchema/UnpackMessage"
xmlns:tns="http://www.w3.org/2001/XMLSchema/UnpackMessage"
elementFormDefault="qualified">
<complexType name="PackHandlerProcessRequestType">
<sequence>
<element name="instanceId" type="string"/>
<element name="activityName" type="string"/>
<element name="result" type="string"/>
</sequence>
</complexType>
<element name="PackHandlerProcessRequest" type="tns:PackHandlerProcessRequestType"/>
</schema>
and the following wsdl file for a bpel process
<?xml version = '1.0' encoding = 'UTF-8'?>
<definitions name="PackManagerWSDL"
targetNamespace="http://xmlns.oracle.com/PackManager"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:client="http://xmlns.oracle.com/PackManager"
xmlns:tns="http://xmlns.oracle.com/PackManager"
xmlns:ns2="urn:UnpackHandler"
xmlns:ns3="http://www.w3.org/2001/XMLSchema/UnpackMessage">
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/PackManager"
xmlns="http://www.w3.org/2001/XMLSchema"
>
<import namespace="http://www.w3.org/2001/XMLSchema/UnpackMessage" schemaLocation="UnpackMessage.xsd"/>
<element name="PackManagerProcessResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="PackManagerRequestMessage">
<part name="payload" type="ns3:PackHandlerProcessRequestType"/>
</message>
<message name="PackManagerResponseMessage">
<part name="payload" element="client:PackManagerProcessResponse"/>
</message>
<portType name="PackManager">
<operation name="initiate">
<input message="client:PackManagerRequestMessage"/>
</operation>
</portType>
<portType name="PackManagerCallback">
<operation name="onResult">
<input message="client:PackManagerResponseMessage"/>
</operation>
</portType>
<plnk:partnerLinkType name="PackManager">
<plnk:role name="PackManagerProvider">
<plnk:portType name="client:PackManager"/>
</plnk:role>
<plnk:role name="PackManagerRequester">
<plnk:portType name="client:PackManagerCallback"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
The receive activity in bpel process expects input message "PackManagerRequestMessage" of type "PackHandlerProcessRequestType"
Now on invoking the Bpel process directly by using the console ... the default input to the process looks like this -
<payload xmlns="" xmlns:def="http://www.w3.org/2001/XMLSchema/UnpackMessage"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="def:PackHandlerProcessRequestType">
<instanceId xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">600</instanceId>
<activityName xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">receive</activityName>
<result xmlns="http://www.w3.org/2001/XMLSchema/UnpackMessage">ok</result>
</payload>
and the receive activity gets the following as input (as taken from Flow in bpel console)
<ReceiveInput_initiate_InputVariable>
<part name="payload" >
<payload xsi:type="def:PackHandlerProcessRequestType" >
<instanceId>800</instanceId>
<activityName>receive</activityName>
<result/>
</payload>
</part>
</ReceiveInput_initiate_InputVariable>
But when i invoke the same process using a SOAP message which looks like
<?xml version = "1.0" encoding = "UTF-8"?>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns2="http://www.w3.org/2001/XMLSchema/UnpackMessage" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP:Body>
<payload xmlns="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="def:PackHandlerProcessRequestType">
<ns2:instanceId>600</ns2:instanceId>
<ns2:activityName>receive</ns2:activityName>
<ns2:result>OK</ns2:result>
</payload>
</SOAP:Body>
</SOAP:Envelope>
the receive activity now gets the following as input (taken from Flow in bpel console)
<ReceiveInput_initiate_InputVariable>
<part name="payload">
<ns1:instanceId>600</ns1:instanceId>
</part>
</ReceiveInput_initiate_InputVariable>
So i am losing input data. Can someone help me form appropriate SOAP message for this ?
Thanks,
SriniThanks Marc,
The SoapUI is really useful. The SOAP request as generated by the SoapUI for above case is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:add="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:pack="http://xmlns.oracle.com/PackManager" xmlns:unp="http://www.w3.org/2001/XMLSchema/UnpackMessage">
<soapenv:Body>
<pack:initiate>
<payload>
<unp:instanceId>800</unp:instanceId>
<unp:activityName>receive</unp:activityName>
<unp:result/>
</payload>
</pack:initiate>
</soapenv:Body>
</soapenv:Envelope>
and the input received at BPEL was as expected.
Thanks a lot.
Srini. -
New Printout message for Consignment Process
Hello,
I use MRKO for consignment settlement.
However I created a new condition type ZKON by copy of KONS to print out the consignment document.
In message schemas for message MR0003 (Consignment) I created a new line with priority for this new condition type:
1 0 ZKON [Edited by: RMC on Nov 25, 2008 4:01 PM] Consignment
10 0 KON6 Consignment EDI
20 0 KONS Consignment
I created in MRM1 the condition type by vendor and company code.
However when I'm trying to print out the document only standard condition type KONS is available and assigned to my consignment documents. No message for condition ZKON is generated.
Can you help me on this? How can I have the print out for the new condition type?
Edited by: RMC on Nov 25, 2008 4:02 PMYou need to go to the transaction NACE and compare the set up of the output type not working to the set up of the output type that is working. I recently had this happen and the set up was missing under PROCEDURES-> CONTROL.
Another area to look at is the condition record when you set it up by company code or supplier... make sure the communications screen is set up as well.
Sandra -
Error in t-code MB90: No messages exists for repeat processing exist...
Hello experts,
I am currently trying out transaction code mb90 and entering the necessary information. When I click on the execute button the error above(the subject line) appears below. I am trying to debug my sapscript form through this t-code but I cannot proceed because of the said error. Thanks a lot guys!Hi viray,
You can use MIGO transaction to create messages.
See http://projectmanagement.ittoolbox.com/groups/technical-functional/sap-r3-log-mm/736652
http://www.dgs.state.pa.us/surp_prop/lib/surp_prop/warehouse/9._sap_procedures.doc
Regards,
Wenceslaus. -
CCB-MDM Integration | Acknowledgement Message for Initial Sync Reqeust
Hi All,
We are intergrating the CCB-MDM and loaded the contact information to MDM env, but there is no acknowledgement message fired from the MDM. And verified that the +ve, -ve Acknowledgement algorithms are not plugged in to "*D1-InitialSyncRequestContact*" BO lifecycle.
But these algorithms are plugged in to ongoing sync request BO's.
Is there any configuration/installation wrong/missing in the env?
Regards,
GuruAt my previous project we ran into the same 'issue'. The response from Oracle Support:
Because of the volumes involved during initial synchronization, and because the nature of initial synchronization is iterative and closely monitored, no acknowledgements are going to be sent back from MDM. Implementations may choose to delete the initial sync records after they have been produced, or introduce a standard Transition To Next Default State monitor on the Awaiting Acknowledgement state of the parent BO when initial sync requests are being produced. This way, the sync request transitions straight through to Synchronized without waiting for a response from MDM. -
Unable to generate message for Consignment Note
Dear all,
I would like to print Consignment Note from MR91, but the system issue message - "No message for initial / repeated processing exist", does anyone know how to solve this issue?
Do I miss out any setting in IMG or it is due to program error? My application release (SAP_APPL) is 470.
Thanks.
Data selection
Output type = KONS
Sort order = 01
Processing mode = 1 or 2
Document number = 51xxxxxxxx
Fiscal year = xxxx
Comany code = xxxxHi LOI ,
At first check whether the condition records are maintained. If it doesn't exist , maintain the same using MRM1 Transaction.
Goto Transaction NACE and Click on Application MR and then o/p types.
Check whether KONS is cofigured properly.
Regards
Ramesh Ch -
Email Alert for Process Chain for ABAP Process Type
Hi BW Experts,
I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
Please some one tell me why it is not showing alert message for ABAP Process Type.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PMI dont have the exact answer for your question, But as a work around i can suggest you that.
If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
--->Failure
>Always
Hope this resolves the problem tempervorly.I will get back to you once i have
Or the permanent solution is
Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf
Maybe you are looking for
-
Hi, One of our clients wants that while carrying out MIGO reference to STO,the ref. field PO only in case of stock transfer shouldn't been allowed i.e. ref. to PO to be hidden,I want to whether it is possible in standard system else we'll have t
-
ORACLE 9I 에서의 NATIONAL CHARACTERSET(AL16UTF16)
제품 : ORACLE SERVER 작성날짜 : 2002-05-27 ORACLE 9I 에서의 NATIONAL CHARACTERSET("AL16UTF16" ) =================================================== Description ~~~~~~~~~~~ Oracle 9i 에서는 NCHAR(National Character Set) 를 UTF8 와 AL16UTF16 만을 지원한다. AL16UTF16 는 Ora
-
Servlets: Scrolling a html page
I have a servlet that generates a page with edit buttons, rows, columns etc. When the edit button is pressed it allows the current row to be edited (hence the name edit button ;). The problem is, when I press a button way down on the bottom of the pa
-
Setting in Order Type Dependent Parameters
Hi Gurus, Can anyone tell me the importance of Setting in Order Type Dependent Parameters ( T.Code OPL8) - setting of purchase requisitions - Reservation / purchase requistion - 1, 2 or 3. What is the significance? Srini
-
3G iPod - No Display on iPod but being recogonized in iTunes
Hi All, Seems like my iPod is sick! The screen is not working (no display) but it is being recognised in iTunes. I have restored original settings but I have the same problem. Any ideas welcome. Thanks PC Windows XP