No messages in sxmb_moni in target machine

Hi,
I have file to proxy scenario; and i see http 200 code in PI sxmb_moni; it means it is sucessful, returned back; but i dont see any messages in sxmb_moni of target R3 system. i did check logging; everything is set in sxmb_adm. and also in channel i have sap/xi/engine?type=entry.
how do i check if the proxy is executed on target side?.
Thanks.
Prema

yes i did send another one. when i saw the sucessful message in sxmb_moni of PI i did not check proxy communication channel in channel monitoring; after little research; i went and checked, aha there was an error
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized
thats becuase the PIAPPLUSER was locked.

Similar Messages

Error Message SCCM 2012 ERROR: Unable to access target machine for request

Should I be concerned with this message, or will it resolve on its own?
---> ERROR: Unable to access target machine for request: "2097153953", machine name: "MININT-NAEAFL", access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153953, 53 SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
This machine is nowhere in my AD or SCCM...It was at one time, But I have deleted it. It still appears in the Logs. The CCM.LOG to be Precise
Bryan

No, this is nothing to be concerned with. Assuming you have auto-client push enabled, it will try to push the client agent to a resource without the agent every hour for 7 days. Thus, after the 7 day period expires from the last time it was discovered,
it won't try to push to this system anymore.
Jason | http://blog.configmgrftw.com | @jasonsandys

BPM Message Mapping: "Cannot produce target element /ns1:BAPI...."

Hi,
A scenario File - BPM - BAPI call was developed, as described in blog 'RFC scenario using BPM' cfr. link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The Mapping is as follows:
MT_EDB_MATERIAL_REQ (1:1) --> BAPI_MATERIAL_EXISTENCE_CHECK (1:1)
MATNR (1:1) -
> MATERIAL (1:1)
When executing the scenario, an error appears in the trace of SXMB_MONI, step 'Request Message Mapping'
Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
I tried the following:
1) import the XML-file into the testmapping: executed successfully
File:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_EDB_MATERIAL_REQ xmlns:ns0="http://agfa.com/SD_EDB">
<MATNR>15P6X</MATNR>
</ns0:MT_EDB_MATERIAL_REQ>
2) Removed the mapping on node level and left mapping only on element level (material): same error
3) Activated the message mapping, interface mapping, determinations, etc again...:same error
4) Removed the Interface Mapping and created it again: same error
5) Compared the version ID of the Interface Mapping/message mapping in the Monitor trace with the version ID of the IR and saw that there was a difference.
After the CPA full cache, SXI_CACHE full refresh and object refresh in the IB Administration, the differences remain, and also the error....
Anybody an idea ?

Hi
>>>Cannot produce target element /ns1:BAPI_MATERIAL_EXISTENCECHECK. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd....
The error clearly says that one of the occurrence value for the target node mentioned is not coming from the source during mapping. The easiest way to solve the problem is as follows
<b>
First Execute the mapping as pointed out by "Raj" and the following steps.
</b>
1. Goto the Mapping Editor
2. Double click on the target node that is causing the problem here BAPI_MATERIAL_EXISTENCECHECK.
3. Right click on the same node and select "DisplayQueue".
4. View the Queue.
5. YOu will find "Suppress" entries, which means a value is expected but no value is coming in.
6.Go from right to left and check each node in the mapping and you will be able to trace where the suppress node comes from and take appropriate action
regards
krishna

The requested feature DSC-Service is not found on the target machine.

Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
and

Hi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
    + CategoryInfo          : InvalidOperation: (:) [], CimException
    + FullyQualifiedErrorId : ProviderOperationExecutionFailure
    + PSComputerName        : devops-01
The SendConfigurationApply function did not succeed.
    + CategoryInfo          : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
    + FullyQualifiedErrorId : MI RESULT 1
    + PSComputerName        : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work.

False Monitoring Message in SXMB_MONI

Dear All,
We are working on a simple File-XI-File scenario. The reciever communication channel is inactive and the file is not getting created at the required destination.
It is giving an error message in Adapter Monitoring but its showing a success message in SXMB_MONI.
I am really surprised seeing this.
I am using XI 3.0 with SP-15. Please tell me what might be the probllem in the scenario or in the server as i am getting a success message in SXMB_MONI.
Warm Regards,
N.Jain

Hi,
>>
when the receiver communication channel is inactive and the file has not got created at the target end then how it can show a success flag in SXMB_MONI?
It is showing success in sxmb_moni because in sxmb_moni ,you can monitor only the ABAP part of the pipeline. Whereas, if you goto message monitoring in RWB, you will find some error like "Waiting". also the adapter monitoring tracks the error as you see it
>>If I am doing Content Conversion at the receiver file adapter with some wrong parameters, it is showing error in the Adapter Monitoring (Red Status of Comm Channel) wheras it is showing a success message in SXMB_MONI.
Again, the concept remains the same. Errors related to the CC are not of a concern to SXMB_moni. At sxmb_moni, it shows the status of the message processed only until the message has been taken from the Outbound Queue. hence, you see success message in sxmb_moni
regards
krishna

Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?

Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?
I have successfully installed working deployments to target machines. However, I was expecting to see the installation listed as "My TestStand System A" in my start menu, but it is not. Am I misunderstanding something here?
Also, if I peform a different second deployment to the target station like "My TestStand System B", all of the LabVIEW files from my previous installation for "My TestStand System A" disappear from the target directory (c:\Program Files\My TestStand System A).
I am using TestStand 4.2.1 Professional on the development station with Windows XP and LabVIEW 2009.
Solved!
Go to Solution.

Thanks Paul,
That solved my second problem and inspired me to search deeper for the answer to my first problem. The answer is in the "Distributed Files" tab, "installer properties", "Create a Program Item" checkbox:
Wouldn't it be nice if this was automatically checked by default for the main sequence files? Wouldn't it also be nice if "Upgrade Code" was automatically regenerated by default whenever we saved the *.tsd file under a different name?
Thanks again,
Eugene
Message Edited by Eugene12 on 05-06-2010 04:27 PM

Not able to deploy windows kernel driver on target machine from visual studio

I have created windows kernel driver, and signed it with production certificate. Now I could install this driver on my target machine manually(copying inf, cat and sys).
I want to make use of the visual studio 2013's deployment facility to deploy the driver automatically. But when I try to add the target computer(with administrative account) it failed with error message "The account credentials used to connect to the
target computer could not gain administrator access to the target computer. Try using the built-in Administrator account".
what possibly could be wrong?

Pavel The host machine is on a domain(say ABC) and I am logged In as the domain administrator. On The target machine I am logged in as the local administrator. Now while adding the target computer from visual studio I am asked for the administrator account
credentials and I am providing the local administrator credentials there.
Pavel I found it is necessary to install "WDK Test Target Setup x64-x64_en-us.msi" on the target machine which I had not run. Once installing that I passed through the previously mentioned steps and after performing few installations target machine
got rebooted. And then the deployment process hanged on step a "Attempting to connect...". Tried this for multiple times but result in to the same problem.

Deploying teststand V3 - mdac98 error on target machine

Thank you in advance.
I have two PXI computer that I'll like to deploy sequence file to, from a development machine, I have successfully create the installer using tool>>deploy test stand system but I get error message "mdac98" required when I attempt to install it to win98 target machine. I have been to the windows website to download and install "mdac98.exe" but I still get the error.
I have read some literature on this issue but got no where. Out of curiosity what is the different between "disturbing test stand" and "deploying test stand". anyone?

Rash,
I just answered a question you posted on DCOM that was nearly identical. Are you also having problems with mdac or was this question supposed to be on DCOM?

Keeping front panel objects aligned on target machine

I have a simple little program that looks fine on my development station but looks like crap on the target machine.
Indicators that are aligned on the dev machine are not aligned on the target machine?
I don't get it, why does it look so bad on the target machine? Worst of all is everyone sees the target machine so it makes me look bad!
Message Edited by RTSLVU on 08-06-2008 10:42 AM
Attachments:
Dev screen.jpg ‏170 KB
Target Screen.jpg ‏219 KB

Hi RTSLVU,
These instructions worked for me:
- Open the VI front panel. Click in File > VI properties > Windows Size
- Enable: Maintain proportions of window for different monitor resolutions
- Disable: Scale all objects on front panel as the window resizes
Check if monitor resolutions are equals.
Klein
Message Edited by Klein on 08-06-2008 11:50 AM
Message Edited by Klein on 08-06-2008 11:50 AM

I can not find the messages in sxmb_moni in http to rfc scenarion

hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help me

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Can not see messages in SXMB_MONI of ECC

Hi Friends,
             Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1.
when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded now BASIS is very confused about configuration.
             when I went through some blogs I came across some suggestions like configuration in SXMB_ADM. In ECC the integration engine configuration what I did is
               Role of Business System         : Application System.
               Corresponding Integ. Server    : dest://<HTTP DEST>
              One of my doubts:: Is <HTTP DEST> is the one which we are giving in XI/PI or the new one created for ECC. First BASIS set up <HTTP DEST> as the same one which was configured in PI. Then I went back to BASIS and tell them that ECC is having its own local Integration Engine, so we need to create <HTTP DEST> which connects to integration engine of ECC.
               Then they created one <HTTP DEST> for ECC. but when I am doing connection test, Http response is coming as 400 BAD HTTP Response :: protocol error. I have no idea why it is behaving like that.
               After when I go through some more blogs they are dealing with RFC destinations LCRSAPRFC and SAPSLDAPI. when I check it in ECC I didn't found RFC destination LCRSAPRFC but SAPSLDAPI is existing in ECC.
               more over some blogs deal with the configuration in Transaction SLDAPICUST. when I check it in ECC no configuration was done in SLDAPICUST.
               I already configured ENGINE_TYPE, IS_URL, LOGGING, LOGGING_PROPAGATION, LOGGING_SYNC under specific configuration data of SXMB_ADM of ECC.
               Please let me know what needs to be done and let me out of this confusion. As I am a PI developer I am unaware of all these configurations. expecting replies from gurus....
Regards,
DASARI

Hi Friends,
             Looking at some more blogs I got a doubt.
            Actually my scenario is File - XI - RFC.
            Now my doubt is whether we can see the messages which were going to ECC by RFC adapter ?
            Looking at a thread I got confused whether SXMB_MONI can capture messages only if they are coming from Proxy or IDOC . please clarify me.
Regards,
Dasari.

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Crystal report error on Target Machine

We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u201CCRforVS_redist_install_64bit_13_0_1u201C run time utility is installed. But it gives a crystal report error on the target machine.
Our development and target machines have Win 7 Professional, 64-bit OS installed.
Kindly provide us with an appropriate run time version for target machine in order to fire reports or any other solution in order to make our project work on target machine.
Thanks!

Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir

Message in sxmb_moni is getting cancelled in 3 mins

Hi Experts,
Few messages for synchronous interfaces are going in to error status in sxmb_moni after 3 minutes even when a timeout parameter of 5mins is maintained in the module tabe of receiver SOAP adapter. Sender is ECC system. Please help resolve the issue.
Thanks and Regards,
Krish

Hello Krish,
Can you check if you can implement the note #1899735 - XI runtime: Trace of HTTP timeouts. This then writes which configuration parameter determines the timeout within the trace of the message in SXMB_MONI.
Regards
Eoin Kierans

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

No messages in sxmb_moni in target machine

Similar Messages

Maybe you are looking for