No messages when importing mail in Entourage X (10.1.0)

Hi,
I'm importing mail from Entourage 2003 to Entourage X. I select the identity and importing starts. Contacts and folders are imported correctly. But the folders are empty ?!
I do not get any error message but for some reason, he skips the mail messages.
I tried it over the wireless network. I connected the 2 mac through firewire... no difference.
Who can help me ?
Thanks,

Do you mean you are trying to import mail from the Entourage version included with Office 2004?
If so, trying to import the mbox format used by Tiger Mail to an earlier Mail.app version under Jaguar or Panther does not work directly without a workaround.
I'm not sure if the same applies to the database format used by Entourage 2004 vs the database format used by Entourage X but it might especially since most want to import the other direction - from X to 2004.
Since this is the Mail & Address Book - Tiger discussions for Apple's Tiger Mail and Address Book applications, you may have better luck getting an answer to your question here.
http://www.microsoft.com/mac/support.aspx

Similar Messages

What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

You mean when you try to just start it?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error message when importing CD's into iTunes.

I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

Iron-Mike wrote:
Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

Out of office message when sending mail to Lotus Notes from SAP

Hi,
Is it possible to have an 'out of office' message when sending mail to Lotus Notes from SAP?
I'm sending account statements by mail via a modified version of function FI_OPT_ARCHIVE_CORRESPONDENCE. The SAP username is send as a parameter, and later converted to the e-mail saved in the user profile. This works, - but I would like to have an out of office reply if the user I send to is out of office.
Hope someone can help...
Regards,
Lene

As Thomas pointed out, you can use regular SMTP mail to send the contents to Lotus Notes. You can use the function module SO_OBJECT_SEND or any of the SAP Office function modules to do this.
Only thing to remember is that the SMTP may have been disabled by your basis team due to security risks involved. An alternative could be a lotus notes connector available from IBM.
Srinivas

Error message when Importing a slide

Hello,
Captivate 4 - When importing a slide from one project to another, importing stops in the middle and an error message pops up "Adobe Captivate have encounter a problem and needs to close". Could it be because the project has been published? Please advise.

Hello,
Acrobat.com is a free service from Adobe, where you can store up to 5GB. You just type in the URL (acrobat.com), log in with your Adobe ID (the same you use for these forums) and can start putting files on it. You can share the file (it is in the right-click menu) and send the link to someone. I'll send you a private message with my e-mail address.
Here you can find some information about acrobat.com: http://www.adobe.com/acom/usewith/
Lilybiri

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Error Message when e-mailing photo

I get this error message when trying to e-mail a photo from lightroom (I have a mac and am using gmail): "An internal error has occurred: ?:0: attempt to index field 'e-mail_photo_caption' (a nil value)."
I have validated my account but my e-mails cannot be sent- thanks for your help!

The build number for 4.1 is 829322, so it's definitely 4.0 you've got open there. Perhaps you dock shortcut is pointing to an older version which should have been trashed? LR was closed while the installer ran?
Personally I'd trash the app and run the installer again to try to rule that out. I'd probably also repair permissions on the drive before running the installer, in case it's prevented from installing.

Error message when importing video

Hi,
I receive the following error message when trying to import .flv file in Captivate 6:
I tried restarting the project several times, as well as creating new flash file, with no luck. This is only a 3-slide project with the video embedded on a slide, and will publish as SCORM.

Hi all Thanks for the rapid response. However I have sort of found the problem but not the solution. I tried loading direct from the card but that failed in the same way. So I had a think what had changed and it was only one thing. It has always worked before because I was using my XP desktop machine. I am now using a W7 laptop. So I went back to XP and hey presto, it worked. SO what does that mean? Any ideas?? Only obvious difference is the OS. In answer to why I am loading from Photoshop. I have loaded 150 video clips from the card from a compact camera.( Been on safari!) I am using PS to sort and tag for various things, then send one group to PE . I ended up that route because they loaded into PS and not PE. So in summary:- I cannot load either directly from card or via PS, video clips into PE on W7, but I can on XP. I can load same into PS and view OK in PS on W7. In case you need further info, but I suspect its a windows issue? OS=W7, PE V7, PSV7, On the W7 PC it says... BIT rate=705kps!,Sample Rate=44khz,Channel count =1 Says image is avi but I thought it was mpeg Nothing else running Its a big fast empty machine, you could have the numbers if you really want but I don't think its relevant Sorry its abit long . Thanks Chris

"File Not Supported" Message when importing AVCHD footage into Premiere on Mac

Hi,
What I am using:
Camera: Sony FS100
Media Codec: AVCHD
Computer: iMac running OSX 10.8.2
Premiere CS6
I have a quirky issue I have been trying to figure out. I just bought a Sony FS100 camera which records footage in the AVCHD format. When I import the "private" folder the camera creates into Premiere, it brings the footage in but always give me this error message: "File format not supported" along with a list of every clip on the card. The thing is, despite the warning, Premiere brings in each clip fine into browser window. I can preview the clips, edit them and export them out of the timeline with no problems that I have seen. Additionally, if I go back to the "File" dropdown and select "Import Recent File", I can select any of the the files individually again and NOT get the error message when I bring in the clips. I have imported from the Private folder amd the AVCHD quicktime inside the Private folder and, when I do, I get the above mentioned error. But if I import any of the .mts folders that Premiere can see inside the AVCHD folder (each .mts folder seems to represent each indvidual clip), they come in perfect without the error message. Additionally, if I locate the folder through the media browser, it brings the clips in without the error message. I can then drag these clips into the Project window like I have been trying to do eith the "import" function. So should I not be using the "Import" function with these files? I want to because that is what I did with FCP? Any help would be much appreciated!

The PRIVATE folder contains far more than just the media. Those additional files are what's generated the message.
The proper method here is to use the Media Browser for importing.

Mail app crashes when importing mail from Netscape.

I have been using Netscape 4 in classic mode for years. I have a HUGE inbox that I need to keep for reference purposes and I would like to switch to using Mail. Mail crashes when I try to import my mailboxes. I moved all my mail to the newest Netscape and tried again and again it crashed.
Is there a third party program that can help this along?
Imac G4 Mac OS X (10.3.9) G4, OS 10.3.9, 800 MHz, Power PC 256 MB SDRAM

Is there a third party program that can help this along?
You might want to take a look at Eudora Mailbox Cleaner - it can import mail from Thunderbird to Mail so I guess Netscape Mail should be fine as well:
http://homepage.mac.com/aamann/
Andreas

HT4623 Iphone 4s access denied error message when importing photos

ok got iphone 4s in feb have used windows live photo gallery to import since i got the phone and never had any problems started having problems with itunes not working say it was on a locked disk and/or didint have write permissions fixed this with a total uninstall and reinstall of itunes and now that works fine but at the same time the itunes stopped working i started getting an access denied error when importing photos via usb via windos live photo gallery i was however able to import my husbands photos from his ipad three days ago the same way i do my iphone and it worked fine with the ipad but not my iphone so here is what i do click for click i plug in the iphone via usb and the autoplay and itunes starts. i close itunes and go to autoplay click on import using windows live photo gallery than the pops open i check the folder to import too (which is on an exterial hard drive) and then i click import and it starts to import and on the very first photo and all photos the access is denied error message pops up help please this is driving me crazy that it worked fine one day and now it doesnt work

Good afternoon
There seem to be a number of possibilities.
Here is a thread that conatins a number of solutions. The most common one is to load 50 pics at a time.
https://discussions.apple.com/thread/3947440?start=0&tstart=0
Hope this helps

Error message when Importing a slides (attached)

Posting on behalf of co-worker who gets the following error when importing cp slides:
any help appreciated
thanks

Hi toll,
Instead of Importing your slides, try copying and pasting them from the original Project file into a new instance of Adobe Captivate and see if that makes any difference.
Let us know how you get on.
Best regards,
Mark

No messages when importing mail in Entourage X (10.1.0)

Similar Messages

Maybe you are looking for