No messsage in SXMB_MONI, although file has been picked up in file to idoc

Hi,
i m working on a file to idoc scenario using MATMAS.MATMAS02, once i got the scenario executed with error status 51 ,
"Messages have been issued: number 0000000000198012"
the datas to be posted were MATNR ,MAKTX,MBRSH , etc , in this MATNR is self generating and I by mistake issued a no to it for testing purpose and the above error came.
again when i tried to test the scenario without assigning any no to MATNR , I find no messsage in SXMB_MONI for this particular execution although file has been picked up from the source directory and it is also not found in the receiver R/3 system using we05 .
Pl help how to rectify the error and find out where the error has again occured and why .
ans will be rewrded
rgds
mojib

hi
go to SXMB_ADM-->manage queues. here desregister, register and active ALL the queues again.
see in SM58 if you have any error.
also in SXMB_ADM go to integration engine configuration and check you have this variabbles
RUNTIME--LOGGING--
0
RUNTIME--LOGGING_SYNC--
0
RUNTIME--TRACE_LEVEL--
3
Rgds
Rodrigo

Similar Messages

HT4859 I need purchased itunes on my changed iphon although contacts has been restored

I needpurchased itunes on my changed iphon although contacts has been restored?

What you are supposed to do is to maintain a backup of your iTunes library (and indeed any other data you care about) so that if something goes wrong with your computer and it needs to be repaired, or you decide to upgrade to a new computer, you can then restore those backup files to your new or repaired system.
If you have an iPod/iPhone etc. with your purchases on then this post from forum regular Zevoneer might help.
Users in the US now have a ability to redownload previous purchases. Hopefully Apple will negotiate this right for the rest of the world as they roll out their iCloud service but right now your remaining option is to ask nicely (start with the Report a Problem link in your account history). There have been reports that, on occasion, iTunes Store staff will grant a second download of your previously purchased content, although they are not obliged to do so.
tt2

Recently upgraded to Windows 7. Some downloads requested are diverted to Windows Explorer although Firefox has been set up to send them to documents. How fix?

This does not happen with websites that open download directly to PDF files. It happens with video files such as those from Revolution Golf. It did not occur with Windows XP.

Feedback helps contributors and many other users.
Have you tried to download to Windows Explorer to see what happens? You could find that there will be later offers to download to Documents, Desktop, Pictures etc. Or a search may find just where the PDF has gone.
Try going to Options>Applications>Your PDF Reader> Preview in Firefox.
You can then download PDFs to your browser and then Save them to Documents or wherever you want.

Email Notification send from previous setting although it has been deleted.

Hello,
Current monitoring schedule for Daily Monitor Open Item (Vendor) are 3 times a day at 1700, 1730 and 1800. However, we receive a notification for this monitoring activity at 0600 with a differents in (1) email header, (2) Monitoring ID and (3) Email Description.
(1) Email Header:
a) Normal notification has a header like below:
Solution number.....SOL/0020203551/0021324570_0020203551
Solution name.......BPM - PER
Business Process....Daily Monitoring
Step................Monitor AP Open Items
System..............PER
Monitoring Object...Open Items (Vendors)
Monitoring ID.......000002736757000
b) The notification we received at 0600 has header like below:
Solution number.....SOL/0020203551/0021324570_0020203551
Solution name.......BPM - PER
Business Process....0000000662
XXX.................0000000674
System..............PER
Monitoring Object...0000000719
Monitoring ID.......000002563457000
(2) Monitoring ID
a) Monitoring ID from our setting at 1700, 1730 & 1800 is 000002736757000
b) Monitoring ID from email at 0600 is 000002563457000
(3) Email Description
Email description from email at 0600 is an old email format. We have no longer using that email format for all of our monitoring activities.
We double check this issue at Scheduling Overview and every day it is expected Collector Runs at 0600 even weu2019re not scheduling this session.
We already deactivate and delete the current setting. Then do the setting again for Daily Monitor Open Item (Vendor). But still the notification is still there.
Please advice on how to disable the unwanted email notification.
Thanks

I have discovered this site which claims the ability to do what you might want. I have no personal experience of it!
http://www.icopybot.com/itunes-backup-manager.htm

Trying to turn off "find my ipad" but the icloud password. is not working although it has been reset and the reset password works ok on my laptop. Any ideas.

I am trying to access iCloud account. I have reset the password, which works with my laptop. On the Apple website the account details show that the account is verified but on the ipad it continually says "verified" and underneath "Account not verified" Have checked the rescue email address but this says account is verified. What should I do? Apple store said I needed to phone. Phone chat suggested and went through change password etc. but nothing has worked and they have no idea. Help?

Hi there dsbrooks911,
You may find the information in the article below helpful.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
-Griff W.

Firefox keeps asking to update to Firefox 31.2.0esr, although it has been done already without error message

For some days now Firefox keeps asking me to update to Firefox 31.2.0esr, although I have done this already without receiving any error message.
The program is on 31.1.0

Your System Details list shows Firefox 31.
What does it tell in Help > About?
Can you attach a screenshot of that window?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
You can find the full version of the Firefox 31.2.0 ESR release in all languages and for all Operating Systems here:
*https://www.mozilla.org/en-US/firefox/organizations/all/
*https://www.mozilla.org/en-US/firefox/31.2.0/releasenotes/
*https://www.mozilla.org/en-US/firefox/organizations/system-requirements/
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

I entered the wrong address in my contacts and now I cannot erase it . When I send an email this wrong addres still appears although it has been erased in my list of contacts..

In my list of contacts I have entered a wrong address. I was able to erase it from that list BUT when I send an email it still appears on the list there and I cannt erase it. What shall I do ?

I have discovered this site which claims the ability to do what you might want. I have no personal experience of it!
http://www.icopybot.com/itunes-backup-manager.htm

TS2446 Why Apple ID keeping saying my email has not been verified although it has been verify?

EverytIme I try purchasing an app it goes straight to signing in then when I do that its sayIng ID not verified, why does this happen?

Go to Settings>iTunes and App Store and Sign out and sign back in
Try verifying again
Why am I sometimes asked to verify my Apple ID by email?
When you create a new Apple ID or make certain changes to your account, Apple will require you to sign in by following the link in a verification email. This is to help protect your identity and keep your account secure. Some Apple services, such as FaceTime and GameCenter, require email validation.
How do I verify my Apple ID by email?
Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID. You'll receive an email prompting you to verify.
Next contact iTunes

Correct procedure to cancel an order line after it has been ship confirmed?

Hi,
I have a customer order that has been picked and ship confirmed and later cancelled by the customer. What is the correct procedure to cancel the order at this stage? Pick slip has been transmitted to warehouse via EDI.
Thanks!

Hello,
Once an order is shipconfirmed, it can not be cancelled.
As the order has already been shipped, the other way through which you can fix this issue is that, create a RMA (Return Material Authorization) & receive the goods in your inventory.
If the original sales order has been invoiced, then you can create a receipt & Credit only RMA so as to fix your financial entries.
Regards,
Jyoti

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

HT204406 Hi, Although I had iunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the m

Hi, Although I had itunes downloaded on my pc & been using for a while now, today I've been prompted to download itunes again. This has been successfull except that 65 songs that I had previously in my library are now no longer able to play, the message informes me that the original files could not be found. Yet these songs are still on my ipod after being syncronised and I can play them on my ipod. Please advise how I can find the original files on my pc.
Thank you
Carol

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

LSMW - Logical Path/File - No logical path has been specified

Hello,
I am trying to create a LSMW with the RM06EEI0 direct input program for ME21N transaction.
At the SpecifyFiles step I get the error message "No logical path has been specified".
My dilemmas are:
1. How can I solve this error? Is the FILE transaction only solution? If yes, where and how I must define the logical path/file?
2. Why in the case of the Batch Input Recording LSMW Method this files are created automatically? (I can see them in the AL11 transaction and I didn't define them by myself).
3. Why on other system this error is just an warning message? If you look at this tutorial http://****************/Tutorials/LSMW/PO/Page4.htm at Step7.g. you can see that there is no need of defining the file/path in FILE transaction.
More info about the system I am working in:
SAP ECC 6.0.
LSMW 4.0.0. Version.
Thank you.
Daniela

Hi
Refer the oss note 753511 released for this kind of error you face in LSMW, I am pasting the content of the note below,
******************Note Content,
Symptom
The system issues an error message for the logical path or file when you perform the "Specify files" step in the Legacy System Migration Workbench (transaction LSMW) although you have made the correct assignment in transaction FILE.
The error messages are as follows:
The logical path <PATH> does not point to the physical directory.
The logical file <FILE> is not assigned to the physical file.
or
A logical path was not specified.
Other terms
Logical path, logical file, transaction FILE, LSM Workbench
Reason and Prerequisites
Some import interfaces that you can also use with transaction LSMW work with logical path and file names.
Transaction LSMW itself, however, works with physical file names. To be able to transfer the LSMW file with the converted data to the import program, you must specify a logical file name for the file with the converted data in addition to the physical file name. In this case, the system displays additional fields in the 'Specify files' step in which you must enter the logical path and file name.
Solution
The error messages may be due to several causes. Check the following:
Have you maintained the logical path and logical file name and have you assigned them to the physical file specified in the "File" input field of transaction LSMW?
These settings are maintained in transaction FILE.
When you use logical file and path names, you must specify the name of the physical file with its path. If you have not specified any directory, you cannot assign any directory to the logical path in transaction FILE. In this case, the system uses the SAP Home directory on the application server by default. Bear in mind that the file name must not exceed the maximum length of 45 characters, including the path.
Up to LSMW version 1.7.2 (*):
If the logical file name specified does not point to the physical file (although it should do), the system adjusts the logical file name, that is, the information in transaction FILE is changed to the entries made in transaction LSMW. This may lead to unwanted side effects if the logical file is also used somewhere else. Therefore, SAP recommend that you always use separate logical paths and file names for transaction LSMW (the problem is corrected as of LSMW version 1.8.0, see below). If the logical file does not exist yet, it will be created upon request.
As of LSMW version 1.8.0 (*):
The settings of the logical file are checked but no longer adjusted automatically as in version 1.7.2 (see above). If there are inconsistencies, the system issues an error message. If the user is authorized to maintain logical paths and file names (as for transaction FILE: "Maintenance authorization for cross-client tables"), transaction LSMW can create the logical path, the file name and the file. Due to this automatic generation, the user no longer needs to make adjustments in transaction FILE. Therefore, we especially recommend this procedure.
To display the version of transaction LSMW, select "Extras" --> "Display LSMW version" in the main menu of the initial screen.
You should also bear in mind that as of Basis Release 6.20, that is, as of LSMW version 4.0, transaction LSMW is no longer an add-on but is delivered with the standard system.
Hope this helps,
Sunil

This file can't be opened because it has been deleted

When I tried to save an Appleworks 6 document by clicking SAVE (drop down menu) and then inputting a file name and then clicking SAVE I get the following message.
"This file can't be opened because it has been deleted."
This problem started yesterday. I also had this problem this morning - but -
I have just tried to replicate the problem and I can't
However, has anybody had this problem before? If you did you solve it, or did it just not happen again?

Although I've only gotten this message when I've had AppleWorks 6 open in both Classic & OS X at the same time, others get it like you with no specific cause. It usually is fixed by using Disk Utility to repair permissions and deleting the AppleWorks 6 preferences. See my user tip, AppleWorks has stopped working correctly, for more on the preferences.

Check if a certain file has been updated in last X days and error if is hasn't

I need to test if a file has been updated within the last few days (it's updated monthly) and proceed if so, but error if it hasn't been updated.
I used the following to check if the file has been updated:
Get-Item c:\temp\junk.txt | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)}
It returns the file:
But I couldn't get that to work in a If/Else statement, so I tried Test-Path:
$path = "c:\temp\junk.txt"
If(Test-Path -path $path | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)})
"File exists"
Else
{“No file” }
Although this always returns "No File".
Any idea what I'm doing wrong??
-Al H

Hi,
Here's how I'd do something like that:
If ((Get-Item c:\temp\junk.txt).LastWriteTime -gt (Get-Date).AddDays(-7)) {
Write-Output 'Less than 7'
Else {
Write-Output 'Too old'
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

I find very annoying that, although the cursor is flashing in the serch box, unless that box has been clicked in to enable it, typing goes to the nearest topic in the bookmark list. how to stop it from happening?

i use Google home page as my firefox home page. often i find that although the cursor is flashing in the serch box, unless that box has been clicked in to enable it, typing goes to the nearest topic in the bookmark list instead of accepting the typing. how to stop it from happening? why not stop the cursor from appearing in the search box unless you have clicked in it?

Do you organise your email into separate folders, or do you just let it accumulate in the Inbox?
I would strongly advise you not to let it sit in the Inbox.
When you see this happening, try right-click on the affected folder, select '''Properties''' then '''Repair Folder'''.
Large folders (actually, a folder in Thunderbird is stored as a file, so it is sensitive to file size limits set by the underlying file system) can be problematic. This is one reason not to let messages collect in one folder. I use Thunderbird's Archive folders so that accumulated mails over several years can happily coexist because they are effectively stored in many small folders. No single mail store folder then exceeds the 2GB or 4GB sizes that have been known to stress the OS. I appreciate that current builds of Thunderbird and a modern 64-bit OS should be able to cope, but practically I find it slows down when given huge files, so I err towards a pragmatic solution; a large number of not very big files.
Archives are searchable, and a Saved Search folder can give you a virtual composite folder allowing access to the entire Archive.

No messsage in SXMB_MONI, although file has been picked up in file to idoc

Similar Messages

Maybe you are looking for