No MIC on front panel, when using LineIn from the Ca

Hi
My TV Card ist connected at the lineIn FLexiJack at the Card. When I connect a Microphone into the FrontPanel of my Fatalty I only get the sound from the TV Card.
How can I use the Microphone?
Which switch do I have to move?

Go to the mixer and select the mic or mic or anything that represent the mic input from the front panel under the REC section.
PS:I don't own a X-FI so not sure the correct option name but it should work the same way as the audigy 2 zs.

Similar Messages

  • How can I hide the main front panel when I run from the executable?

    Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?

    NIquist wrote:
    Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
    Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
    P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
    Try to take over the world!

  • Setting up position of front panel objects using input from file

    I am working on a project and i have got the following query.
    i have a front panel with lot of objects like knobs,dials,push buttons etc..
    the entire panel will be the console to the user and as he changes the various
    positions of the objects their values will be written in to a file.
    now after a days work when the system is restarted again the next day
    the values of various objects should be read from the file and the front panel objects should be set in their position according to it
    in short the objects(knobs,buttons etc) should both act as o/p i.e when user interacts with them and they should also act as i/p when their position will be set from
    file.
    how can i achieve this.any help regard
    ing this would be greatly appreciated

    You should separate the read portion of this vi from the write portion of the vi. You want to execute the read portion of the vi only at startup and the write portion of the vi only at shutdown. So you'll be reading the file and writing the output to the property nodes, running your program, and then taking the value of the controls and writing to file. I have attached an example of how this might work. You might also do this with a state machine structure to control the data flow.
    Hope that helps
    Attachments:
    query.vi ‏49 KB
    read_file.vi ‏42 KB
    write_file.vi ‏36 KB

  • When using photos from the "Media" option in Applescripts and other apps, it takes a LONG time to load the photos from iPhoto...

    It also happens when using the Media option in programs like iMovie. Has anyone found a solution for this problem?

    That is long...
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    If it is...
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there.
    Regards
    TD

  • Show LabVIEW VI Front Panel When Sequence Step Called

    Hello,
    By clicking on the “Show VI Front Panel When Called” checkbox in the Step Settings pane displays the LabVIEW VI Front Panel for approximately 100 milliseconds. Is there a configuration way to display the VI front panel for a longer period of time, during that step execution, and allow the user to control the duration of the front panel exposure by clicking to resume execution of the sequence file at their will?
    Thank you.
    Solved!
    Go to Solution.

    Hi,
    You will need to have some sort of structure in your VI for handling front panel response, otherwise you front panel is only going to be visible for as long as it takes to execute an return back to teststand.
    But remember, once you hold your step within that VI which is waiting on the operator to eventual close it, your Sequence will be held as well and if you are expecting steps to continue running after your VI then you will have to consider running it in parallel to your main test sequence.
    You may also need to consider what happens if you want to terminate your Test Sequence, how do you close your VI.
    Check out 'Strategies for Terminating or Breaking Sequences' in the following.
    hope this is of help
    Regards
    Ray Farmer

  • I created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

    i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?

    Expanding and clarifying what BJD said;
    After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
    This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
    The technique of "create sub-VI...copy" always works for me.
    There is one more thing that you should watch out for.
    The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to save the data that a user has written in a table (front panel) by using a "press button"?

    Hi,
    I have the following situation. I need to be able to save the data I write in a table (front panel) when desired.
    This allows me to modify, add new data, etc in the "Table" when wanted and to SAVE the latest information when wanted.
    I need to save all the table data by using ONLY one button.
    Thanks for the help!
    Kind regards,
    Amaloa S.

    Hi,
    Thanks for the feedback. :-)
    Your answered helped.
    In this case I need to save the Data into an ARRAY.
    Now I have the following issue. I will try to explain:
    Suppose that I have following:
    1. Several GROUPS of Data like this:
        ER-1234
        ER-3245
        ER-4786
        ER-9080
    2. Each GROUP has the following ELEMENTS:
        A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
       So it would be like
        ER-1234: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-3245: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-4786: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
        ER-9080: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
     3. An each ELEMENT has DATA that I need to save, BUT! that I need to be able to get by specifying the group and the element.
        A:
             2,3   2,4    2, 8,   2,8 
             2,2   2,3    2, 7,   2,6
             2,1   2,6    2, 6,   2,7 
             2,5   2,4    2, 5,   2,3
    How can I save the ELEMENT "A" Data with the label of the GROUP and the ELEMENT so that I can recongnize it when I need to get the DATA again?
    Thanks for the help!
    Best regards,
    Amaloa.

  • Looking for a way to programmatically set the visible portion of the front panel when a subVI opens

    I am looking for a way to programmatically set the visible portion of the front panel when a subVI opens.  Haven't found any posts that relate, but I'm not sure how to ask the right question.  To be clear, I want to write a helper VI to go through a list of subVIs to make sure the background images are all in the same place when their respective subVIs open.  I hate manually playing with scroll bars before I save each of the VIs...  I'm figuring I need to find the top/left location of the background image (know how to do this already) and then set a VI FP property to  these values or some offset, but I can't find the relevant property. FP:run-timeposition:custom looked promissing, but only affects the location of the window, not the area of the front panel the window is displaying.
    Solved!
    Go to Solution.

    Cool.  Getting closer.  The way I implemented your suggestion affects the subVI only if it is open.  I can use this to do what I'm after, perhaps putting the code into each subVI.  Maybe open all subs, run the helper, and save.    Seems like I'm missing the elegant version...
    My proof of concept code:

  • How to create control dynamicall​y while front panel fly using Xcontrol or anyothere options but without scripting tools

    Hello friends
               I have one doubt How to create control dynamically while front panel fly using Xcontrol or anyothere options but without scripting tools.I need to create the controls while vi is running.For example I need to create one Boolean  while VI was Fly and i need one Examples it is easy to understand.
    Jayavel

    You must be using a different dictionary than the rest of us.
    You can't dynamically create controls while a VI is running.   (If I'm mistaken, then I'm sure someone else can jump in and say how it can be done.)
    Do you have a finite number of controls you could possibly need?  What you can do is create enough controls of the type you need ahead of time.  At the beginning of your program, you hide all of those controls.  As you need to create a control, you make it visible using property nodes.  There are numerous properties you can set at run time suce as ranges, colors, captions, ...  Of course you can't wire these controls to any other bits of code ahead of time since at that time, you haven't defined what you want each one to actually control.  But if you use an event structure to detect when the values of the controls have changed, you can then programmatically pass the data off to other parts of your code using queues.  The architecture can get complicate quite fast, so you may want to look through Ben's Action Engine Nugget and other related threads for how to create mechanisms for using these controls.  Perhaps storing queue reference numbers or assign user events to each one.

  • Hide front panel when opened

    I have a VI running as a back ground task (VI_A) to the main VI (VI_B). VI_B starts VI_A and the idea is that VI_A will be minimised on startup. There is a button on VI_B to restore the window and a button on VI_A to hide the window and return to VI_B.
    This is all working OK, I open VI_A front panel when called, VI_B minimises VI_A straight away etc, I am using the WINUTIL.LLB functions to perform this. The problem I have is VI_A front panel is visible upon start up for a couple of seconds (there is no real delay in my execution to minimise). I have tried setting VI_A to be at teh back within VI_A but still it appears at the front for a couple of seconds.
    Does anyone have any suggestions as to why this is occuring.
    Cheers,
    Wayne

    One thing that you could do is to change the Windows Appearance property to NOT open front panel when called. You can then have your main VI (VI_B) open the panel for VI_A as before, but it will not start with the panel open. If you are creating an executable, go to the VI Settings tab page and click on the line with VI_A and then Edit Settings. Turn OFF the Remove Panel property. This should work for you (I've done similar already anyway).
    Rob

  • How to see the full program on the front panel when it is running?

    Hi, my program is really big, and when I run it and obverserve the program on the front panel, I cannot drag the window to see the other parts. Also, I tried the method like hold control, then press + to zoom in or press - to zoom out. However, labview seems doesnt have this function. Does anyone know how I can see the full program then it is running, maybe zoom out or drag the windows? thanks! 
    Attachments:
    not running.png ‏85 KB
    running.png ‏72 KB

    You should use a Tab control.  Group your front panel objects together and put the grouped items in tabs.  Then you can select the Tab you want to display while the program is running.
    It is never a good idea to make your screen too big to fit on one display.  This goes for the block diagram also.  If you have to scroll to see it all, use more subvi's.  Make it modular.  A state machine is a good way to put a lot of code on one display screen.
    - tbob
    Inventor of the WORM Global

  • How to show the front panel when launching VI with Call by reference node??

    Hello!
    I just wonder how I make the front panel visible during execution when I launch the VI with CALL BY REFERENCE NODE.
    Se example.
    Could u also show me how to change different properties (window size ..) of the front panel??? (launched with CALL BY REFERENCE NODE)
    Thank you!
    Attachments:
    test.vi ‏18 KB

    In VI Properties>>Window Apperance>>Customize you can check "Show front panel when called". This will open the front panel on each call. It doesn't matter how the call was initiated.
    You can set a lot of Front panel properties during runtime. Place a Property Node in the block diagram. Change the class from App to VI. Under properties select Front Panel window>>Panel bounds to set the position and size of the front panel.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Disable launch of front panel when starting web services

    Hello all,
    This may be a naive question as it may have a simple answer that I am missing, but is there a way to not have all VIs associated with a web service launch (i.e. show their front panel) when you start a web service?  I find this to be very irritating as I have a lot of VIs associated with the web service that I am running and don't want my windows cluttered up with VI front panels that I am not interested in viewing.  
    Thanks, Matt
    Matt Richardson
    Certified LabVIEW Developer
    MSR Consulting, LLC

    Thanks for the reply, tst.  I was hoping that I would be able to reproduce this on the client side, but unfortunately I can't generate a simple example .  My web service is large and contains a lot of resources to access different variables and it seems to reproduce this, you would have to deploy this onto an RT target.
    Some further insight into the issue - starting a web service on my current target is similar to when you select Deploy All on a virtual folder in a project - all of the front panels become visible.
    Matt Richardson
    Certified LabVIEW Developer
    MSR Consulting, LLC

  • I want to remove or hide the Details Panel. when using OpenDoc.

    Hello I'm Yong ho Park.
    I recently had hard time because of Details Panel.
    I want to remove or hide the Details Panel. when using OpenDoc(Dashboard file).
    My system's version is  BI 4.1 SP02.
    Is your problem solved??
    If your problem isn't solved, I want to be offered related formation.
    I need your help. !!

    Hi,
    you cant hide the Details Panel. This behaviour is By Design.
    http://service.sap.com/sap/support/notes/2021076
    Regards
    -Seb.

  • Xperia Z1 mic issue (low volume) when using WeChat

    Was searching this forum for a solution, but to no avail. Using Wechat on Xperia Z1 with Android 5 is impossible because mic records at very low volume and other parties strugle to hear me. Microphone suppresion and voice enhancement are turned off, equalizer set to normal. PC companion shows most current version of software. Dear users and/or Sony, could you suggest for any solution?

    Please consider this before buying Sony Xperia phones: Chat TranscriptPlease wait while we find an agent to assist you...You have now been connected to an agent.Emir:  Hi Client Name! Welcome to Sony Xperia Support, my name is Emir. 
    I'm currently reading your message. In the meantime, I would appreciate if you kindly could leave your first and last name, your e-mail address and mobile phone number.Client Name:  Client Name, [email protected], +37067530xxxEmir:  How may I help you?Client Name:  Hello, I have posted a topic about an software issue in Xperia Z1: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Xperia-Z1-mic-issue-low-volume-when-using-WeChat/m-p/1020748/highlight/true#M44196Client Name:  it was ignored by staff, so I posted another topic about how Sony ignores issues of flagship phone ownerClient Name:  this topic was moved out of forum to this topic to be burriedClient Name:  can I speak with someone in charge?Emir:  No, there's no such contact I can refer you to,.Emir:  I'm sorry to hear that your thread has not been replied to.Client Name:  What do you mean? You're independant worker not accountable to anyone?Client Name:  its been replied with default answer that all posters with similar problem receivedEmir:  I'm a technical support agent for the chat, I don't have any information about the Forum team.Client Name:  we are specifically ignored until Z1 goes broke and out of your problemsClient Name:  I need someone in charge from your department who could personally overlook this issue that many users haveClient Name:  its not just me, mic problems are apparent for many usersEmir:  This issue concerns a third party app, and you have already been in contact with me regarding this issue. We can't guarantee that third party apps are compatible with your device since we do not develop them. I recommend that you contac the app developer for more information.Client Name:  I dont understand why phone hacker can solve this software issue by themselves, but Sony engineers choose to ignore usClient Name:  no, this issue also goes to many other apps, including native app TrackIDClient Name:  its the problem in new Android releaseEmir:  You may try a software repair to see if the issue persists in TrackID like the agent on the forum suggested - if the problem persists and you suspect there's something wrong with your device you may have it sent in to an authorized service center so that a technician may examine it.,Client Name:  These steps were performed by other users with no luckClient Name:  I wont repeat this to come to the sameClient Name:  I ask engineers to look into solution developed by XDA team and implement for us normal usersEmir:  Those are the troubleshooting steps I can refer you to in this case.Client Name:  They dont work, please find another solution or ask for person who can do it, if you cantEmir:  I have already provided troubleshooting steps, you may try that. If a software repair does not help then I can only refer to service.Client Name:  I already told that these steps didnt work for other users, who have same problem. So you admit that you wont help your client?Emir:  I can't suggest a possible solution other than what I've already suggested unfortunately.Client Name:  So I have no choice, but to share our chat in all possible internet sources for other existing or would be Sony users to consider how they will be treated upon problems arise.Client Name:  Thank you for your support, I hope you will be promoted for high quality service

Maybe you are looking for