No microphone audible in XP64 with Xfi Fatal
I am running XP 64 pro and cannot get the microphone to work either in windows or in utils like Teamspeak. All the properties are there, the volume is turned up etc. But it's like there is no microphone connected.
any ideas?
dave henrie
thanks
edit....did get the mic working, but only by enabling the onboard sound and using the motherboard sound plugs(ports) No audible sound when plugged into the SB X-fi fatality.
dh
Message Edited by davehenrie on 09--200707:06 PM
Message Edited by davehenrie on 09--200707:08 PM
)? No, don't install any of the apps, they are XP only (the ones that came on CD). If you want applications search the forums for "UPAX" although these are hacked chinese drivers \ apps so use at your own risk.
Don't bother asking when you will get drivers \ applications, nobody knows when\if you will. 2a) ? Open Control panel, open "Sound", on playback devices select speakers, right click and select properties. Select "levels" and mute whichever input your mic is plugged into. 2b) http://forums.creative.com/creativel...message.id=254. In short you are screwed.
Additionally, if you just bought the card you have a couple of options:?)? Return it now, do some research and find a card with working\decent vista support. They are out there. (I would do this if I could but I am stuck with this thing for the time being.)?2)? Wait for CL to get their act together but you may have to wait a long time. Historically they release drivers every quarter and they just released a very disappointing set of drivers two weeks ago. They will not communicate their plans or disseminate any information to the sheeple that bought their product so noone has any clue when anything will be fixed or when or if?apps will be available.
Similar Messages
-
SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7
5SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7z Ok sorry if this hasbeen covered before but I searched and couldn't find it so here goes:
I have a two month old XFI FATALTY TITANIUM CARD WITH THE FRONT PANEL BREAKOUT BOX.
It showed up staright away as a hi fi device and the optical output when selected works ok I dunno about surround sound it simply plays great stereo through my Arcam DAC connected up to my stereo.
Problems began when I decided to install the Creative Software. What happens i sit plays for maybe o mins then mutes also I primarily use i tunes and it wont play anything until a few seconds after the music starts.
This is just on optical out if I use standard phono to 3.5mm jack its fine.
What puzzles me is why this happens when using the creative software ? Reverting back to the pre creative software it plays fine I would just like to take advantage of the various functions suplied with creative software?
Any ideas please. FWIW I Completely deinstalled the card and installed? abasic CMI 8738 card and that does the same so maybe its windows 7
Oh spec wise Windows 7 32 bit
4GB RAM
Asus MOBOWeird... I changed nothing and yeterday it worked...
I just understand this, but what the hell? -
Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal
Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
!!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
rocessor >
?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
??????4400+
?Speed:???? 2.2GHz
?Model Number:???? 4400 (estimated)
?Performance Rating:??? PR7072 (estimated)
?Cores per Processor:?? 2 Unit(s)
?Threads per Core:??? Unit(s)
?Type:????? Dual-Core
?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
??????64 byte line size
?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
??????set, 64 byte line size
?<Mainboard >
?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
?MP Support:???? 2 Processor(s)
?MP APIC:???? No
?System BIOS:??? American Megatrends Inc. 8.2
?System:????? System manufacturer System Product Name
?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
?Total Memory:???? 3.9GB DDR-SDRAM
?<Chipset >
?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
??????Opteron HyperTransport Technology
??????Configuration
?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
?Total Memory:???? 4GB DDR-SDRAM
?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
?<Video System >
?Monitor/Panel:??? Default Monitor
?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
?Adapter:???? NVIDIA GeForce 7800 GTX
?Adapter:???? NVIDIA GeForce 7800 GTX
?hysical Storage Devices >
?Removable Dri've:??? Floppy disk dri've
?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
?Hard Disk:???? NVIDIA? STRIPE? 38.49G
?Hard Disk:???? Generic USB CF Reader USB Device
?Hard Disk:???? Generic USB MS Reader USB Device
?Hard Disk:???? Generic USB SD Reader USB Device
?Hard Disk:???? Generic USB SM Reader USB Device
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
??????(DVD 5X Rd, 5X Wr)
?<Logical Storage Devices >
?.44MB 3.5" (A:??? N/A
?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
?CD-ROM/DVD (E:??? N/A
?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
?Ssdisk (H:???? 629MB (CDFS)
?Bf2xpack cd (I:??? 677MB (CDFS)
?Farstone (J:??? 00MB (CDFS)
?Removable Dri've (K:?? N/A
?Removable Dri've (L:?? N/A
?Removable Dri've (M:?? N/A
?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
?Removable Dri've (O:?? N/A?EvolovEEvolve,
I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
) Hit Del to get into Bios
2) Go to the second tab on the top of the screen "Advanced"
3) Select the first option in the menu "CPU Configuration"
4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
5) Select Manual configuration from the first Menu item.
6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
7) Hit f0 and save the config.
You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
My Specs
A8n-sli premium (Bios -06)
amd X2 4400 (~2.5 GHZ)
4GB LL patriot memory (~228 HZ)
X-Fi Extreme Music
LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
2x Seagate Cheata 5K.3?dri'ves
All water cooled
Good Luck
PapaH
By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64. -
Microphone problems in Vista with XFI-ExtremeGa
Recently purchased the XFI and installed using just the creative drivers from this website (the 5th March release) however I am now totally confused.. do I install ANY of the software from the XFI installation CD?Secondly, how do I mute the microphone? I have it plugged into the rightmost socket on the back of the card (the white socket) but several things are not working. At no place inside Vista can I mute the mic.. if I turn the recording volume to 0% it doesn't make any difference, also without using the +20% mic boost any voice is incredibly quiet despite maximum recording volume, however if I use mic boost I get horrible hissing continuously!?So to summarize.. Microphone volume doesn't work at all?and no option to mute the mic, I have just a limited control panel with effects which seem to make little difference to sound quality and I am left wondering what I have bought for ?60.00 exactly?Anything I am doing wrong?
)? No, don't install any of the apps, they are XP only (the ones that came on CD). If you want applications search the forums for "UPAX" although these are hacked chinese drivers \ apps so use at your own risk.
Don't bother asking when you will get drivers \ applications, nobody knows when\if you will. 2a) ? Open Control panel, open "Sound", on playback devices select speakers, right click and select properties. Select "levels" and mute whichever input your mic is plugged into. 2b) http://forums.creative.com/creativel...message.id=254. In short you are screwed.
Additionally, if you just bought the card you have a couple of options:?)? Return it now, do some research and find a card with working\decent vista support. They are out there. (I would do this if I could but I am stuck with this thing for the time being.)?2)? Wait for CL to get their act together but you may have to wait a long time. Historically they release drivers every quarter and they just released a very disappointing set of drivers two weeks ago. They will not communicate their plans or disseminate any information to the sheeple that bought their product so noone has any clue when anything will be fixed or when or if?apps will be available. -
GRAW and XFI fatality = graw er
HELP I cant play GRAW with xfi fatality installed if i use legacy or on board its fine
Ich hab 'ne "Platinum" und auch die Fatalty XtremeGamer Pro und die?alleinig Unterschied ist X-RAM.
-
Problem with drivers/ sound stopping / vista32bit/ xfi fatal
i have an xfi fatality, installed the latest drivers and since then, sound will stop at random times usually happens when i am pausing something on media player (videos) and it might come back when i reopen the video
sometimes i will watch a video on firefox, and i might not get any sounds at all (sounds completely stop, not only per application)
sound will come back, on its own, at random times. some times i need to restart
i uninstalled the audio console, uninstalled the driver from system, and installed the previous version and i am still getting this problem (i wasnt getting it before)
any solution
thanks a lot.Is there anybody with any idea what the problem might be?
-
Xfi fatality. sound problems with other devi
hello all. just recently bought a xfi fatality card,and im trying to connect it to my xbox 360 to get sound, and thats when the problems start.i have a optical cable from my xbox 360 connector to the optical in on my fatality front panel and some headphones connected to the headphone jack, but i get no sound at all. i have also tried the rca inputs on the front panel but no sound there either.tried to hook up a dvd player to just to test it, but like always no sound. its not my xbox thats faulty?as i've tested it on my stereo. could someone please help me im at a loss and dont know what to do.i've tried to change stuff in console but to no use. thanks for your help and?replys paperman?ps have searched the forum but no luck?
I had this problem to begin with, its just because as default the SPDIF in is muted. If you open the launcher in entertainment mode go to the option where you can the volume to each kind of audio and at the top of the volume slider on some of the devices there is an arrow pointing down. Click on this and choose SPDIF and then unmute it. I'm having a further problem now though as i've got the sound playing from my PS2 but i cant get 5. from it on DVD videos only stereo, any ideas?
-
B Hi there, i have an XFI Fatality Pro sound card. The card is fine on its own. I have acquired a breakoutbox which i think is from the elite pro, has the model SB050 on the bottom...
Now using the AD LINK cable i connected it to my sound card, as soon as i do this i get loud static noise untill i either mute sound or remove the AD LINK cable. I've tried individually muting all inputs and outputs on my volume panel but only muting all sound stops the noise...
Am i simply not able to use this breakout box with my Fatality sound card? Or are there drivers i should install to enable the breakout box functionality?
Forgot to mention im on Vista 64, core2duoMessage Edited by Creomortis on 05-5-2009 04:40 PMMessage Edited by Creomortis on 05-5-2009 04:4 [email protected]to the best of my understanding *(only from past experience, I dont have one of these)* the two are not compatible. The Breakout box you are talking about is for an elite pro, while the Fatality connects only to an i/o dri've or li've dri've as it used to be called. you may have mistakenly connected the breakout box to the MIDI connector/joystick port on the back of the sound card.
Cheers,
jmacguire -
Hi,
OS : Windows Vista ultimate 64bit
Soundcard : Xfi Fatality
Speaker systems : z5500$
plz..anyone know what the issue is here, apart from the obvious,
creative...i cant beli've the way you treat custom...
i have read all over the internet fo months and still you cant sort out simple drivers for vista, you make millions from us peeps
and with that money why dont you spend some time down at the local job center and employ some real programmers. for gods sake man...
its bad bad bad..
i also read and i dont care if i get booted from this forum daniel k's drivers are the ones to use..however it looks like creative have done some legal stuff and got all the d/l removed off the net..ne one got a sneeky link i can goto to get the vista 64 version would be appreciated...
i will never get and will put anyone else off getting a creative product again..dreadfull..
N@
Message Edited by sondoobie on 03-26-2009 03:7 [email protected] -
XFI Fatality Gamer + GigaWorks S750 + Decoder DDTS-
Dear Sir,
Im using XFI Fatality Gamer + GigaWorks S750 + Decoder DDTS-00 ( just bought it ) and the question is I feel no difference ( Dolby Digital and DTS Effect ) when I'm not using the Decoder.
What I've done is I already :
Connect cable from my soundcard to switch box and then another cable I connect it from my Gigaworks to switch Box. And then from the switch box it self I connect it into the decoder. All the cable im using is the standard from Creative. I haven't used any coax or optical cable.
Looking forward and really appreciated for the assistance.
Many Thanks.To connect your Soundblaster NX to your DDTS-100 decoder, and let the decoder handle the DD/DTS decoding, you have to connect a digital/optical/coax cable, from the digital output of the NX, to one of the digital inputs on the decoder.. Also make sure you have set the settings on the souncard, to "digital output only", so that the decoder can decode the encoded digital streams, sendt by the soundcard..
if you want to connect your soundcard to the decoder via analog cables, and let the soundcard do the decoding it self, you will need to use a 7.1 analog-audio cable, that comes with both the decoder and the speaker system. Connect the audio cable from the analog output on the soundcard, to the input "switch-box", and set the switch-box to "PC-audio". Also make sure you have connected your speakers to the "switch-box". -
JDev 1013 Error: Internal compilation error, terminated with a fatal except
I've a class I compiled used in JDev 10.1.2.1.
Now I try to compile it with JDev 10.1.3 but I get an error :
Error: Internal compilation error, terminated with a fatal exception
What does it means ?
How can I solve it ?
I tried to use both 5.0 and 1.4.2 compilers but the result is the same.
Tks
Tullio
Here the class
/* The following code was generated by JFlex 1.2.2 on 05/10/04 17.46 */
* Copyright (C) 1998,99 Gerwin Klein <[email protected]>. *
* All rights reserved. *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License. See the file *
* COPYRIGHT for more information. *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, write to the Free Software Foundation, Inc., *
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *
package axioma.a4j.parser;
import java_cup.runtime.*;
* This class is a scanner generated by
* JFlex 1.2.2
* on 05/10/04 17.46 from the specification file
* <tt>file:/C:/A4j/A4j/Common/Parser/grammatiche/Scanner.flex</tt>
public class AxScanner implements java_cup.runtime.Scanner {
/** this character denotes the end of file */
final public static int YYEOF = -1;
/** lexical states */
final public static int STRING = 1;
final public static int YYINITIAL = 0;
final public static int CHARLITERAL = 2;
* Translates characters to character classes
final private static String yycmap_packed =
"\11\10\1\3\1\2\1\0\1\3\1\1\16\10\4\0\1\3\1\50"+
"\1\16\1\0\1\7\1\0\1\44\1\15\1\31\1\32\1\5\1\41"+
"\1\40\1\42\1\14\1\4\1\12\11\13\1\0\1\37\1\47\1\46"+
"\1\45\2\0\32\11\1\35\1\17\1\36\1\0\1\11\1\0\1\25"+
"\1\51\2\11\1\23\1\24\5\11\1\26\1\6\1\30\3\11\1\21"+
"\1\27\1\20\1\22\5\11\1\33\1\43\1\34\1\0\41\10\2\0"+
"\4\11\4\0\1\11\12\0\1\11\4\0\1\11\5\0\27\11\1\0"+
"\37\11\1\0\u0128\11\2\0\22\11\34\0\136\11\2\0\11\11\2\0"+
"\7\11\16\0\2\11\16\0\5\11\11\0\1\11\21\0\117\10\21\0"+
"\3\10\27\0\1\11\13\0\1\11\1\0\3\11\1\0\1\11\1\0"+
"\24\11\1\0\54\11\1\0\10\11\2\0\32\11\14\0\202\11\1\0"+
"\4\10\5\0\71\11\2\0\2\11\2\0\2\11\3\0\46\11\2\0"+
"\2\11\67\0\46\11\2\0\1\11\7\0\47\11\11\0\21\10\1\0"+
"\27\10\1\0\3\10\1\0\1\10\1\0\2\10\1\0\1\10\13\0"+
"\33\11\5\0\3\11\56\0\32\11\5\0\13\11\13\10\12\0\12\10"+
"\6\0\1\10\143\11\1\0\1\11\7\10\2\0\6\10\2\11\2\10"+
"\1\0\4\10\2\0\12\10\3\11\22\0\1\10\1\11\1\10\33\11"+
"\3\0\33\10\65\0\46\11\13\10\u0150\0\3\10\1\0\65\11\2\0"+
"\1\10\1\11\20\10\2\0\1\11\4\10\3\0\12\11\2\10\2\0"+
"\12\10\21\0\3\10\1\0\10\11\2\0\2\11\2\0\26\11\1\0"+
"\7\11\1\0\1\11\3\0\4\11\2\0\1\10\1\0\7\10\2\0"+
"\2\10\2\0\3\10\11\0\1\10\4\0\2\11\1\0\3\11\2\10"+
"\2\0\12\10\4\11\16\0\1\10\2\0\6\11\4\0\2\11\2\0"+
"\26\11\1\0\7\11\1\0\2\11\1\0\2\11\1\0\2\11\2\0"+
"\1\10\1\0\5\10\4\0\2\10\2\0\3\10\13\0\4\11\1\0"+
"\1\11\7\0\14\10\3\11\14\0\3\10\1\0\7\11\1\0\1\11"+
"\1\0\3\11\1\0\26\11\1\0\7\11\1\0\2\11\1\0\5\11"+
"\2\0\1\10\1\11\10\10\1\0\3\10\1\0\3\10\2\0\1\11"+
"\17\0\1\11\5\0\12\10\21\0\3\10\1\0\10\11\2\0\2\11"+
"\2\0\26\11\1\0\7\11\1\0\2\11\2\0\4\11\2\0\1\10"+
"\1\11\6\10\3\0\2\10\2\0\3\10\10\0\2\10\4\0\2\11"+
"\1\0\3\11\4\0\12\10\22\0\2\10\1\0\6\11\3\0\3\11"+
"\1\0\4\11\3\0\2\11\1\0\1\11\1\0\2\11\3\0\2\11"+
"\3\0\3\11\3\0\10\11\1\0\3\11\4\0\5\10\3\0\3\10"+
"\1\0\4\10\11\0\1\10\17\0\11\10\21\0\3\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\12\11\1\0\5\11\4\0\7\10"+
"\1\0\3\10\1\0\4\10\7\0\2\10\11\0\2\11\4\0\12\10"+
"\22\0\2\10\1\0\10\11\1\0\3\11\1\0\27\11\1\0\12\11"+
"\1\0\5\11\4\0\7\10\1\0\3\10\1\0\4\10\7\0\2\10"+
"\7\0\1\11\1\0\2\11\4\0\12\10\22\0\2\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\20\11\4\0\6\10\2\0\3\10"+
"\1\0\4\10\11\0\1\10\10\0\2\11\4\0\12\10\22\0\2\10"+
"\1\0\22\11\3\0\30\11\1\0\11\11\1\0\1\11\2\0\7\11"+
"\3\0\1\10\4\0\6\10\1\0\1\10\1\0\10\10\22\0\2\10"+
"\15\0\60\11\1\10\2\11\7\10\4\0\10\11\10\10\1\0\12\10"+
"\47\0\2\11\1\0\1\11\2\0\2\11\1\0\1\11\2\0\1\11"+
"\6\0\4\11\1\0\7\11\1\0\3\11\1\0\1\11\1\0\1\11"+
"\2\0\2\11\1\0\4\11\1\10\2\11\6\10\1\0\2\10\1\11"+
"\2\0\5\11\1\0\1\11\1\0\6\10\2\0\12\10\2\0\2\11"+
"\42\0\1\11\27\0\2\10\6\0\12\10\13\0\1\10\1\0\1\10"+
"\1\0\1\10\4\0\2\10\10\11\1\0\42\11\6\0\24\10\1\0"+
"\2\10\4\11\4\0\10\10\1\0\44\10\11\0\1\10\71\0\42\11"+
"\1\0\5\11\1\0\2\11\1\0\7\10\3\0\4\10\6\0\12\10"+
"\6\0\6\11\4\10\106\0\46\11\12\0\47\11\11\0\132\11\5\0"+
"\104\11\5\0\122\11\6\0\7\11\1\0\77\11\1\0\1\11\1\0"+
"\4\11\2\0\7\11\1\0\1\11\1\0\4\11\2\0\47\11\1\0"+
"\1\11\1\0\4\11\2\0\37\11\1\0\1\11\1\0\4\11\2\0"+
"\7\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0\7\11\1\0"+
"\27\11\1\0\37\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0"+
"\47\11\1\0\23\11\16\0\11\10\56\0\125\11\14\0\u026c\11\2\0"+
"\10\11\12\0\32\11\5\0\113\11\225\0\64\11\40\10\7\0\1\11"+
"\4\0\12\10\41\0\4\10\1\0\12\10\6\0\130\11\10\0\51\11"+
"\1\10\u0556\0\234\11\4\0\132\11\6\0\26\11\2\0\6\11\2\0"+
"\46\11\2\0\6\11\2\0\10\11\1\0\1\11\1\0\1\11\1\0"+
"\1\11\1\0\37\11\2\0\65\11\1\0\7\11\1\0\1\11\3\0"+
"\3\11\1\0\7\11\3\0\4\11\2\0\6\11\4\0\15\11\5\0"+
"\3\11\1\0\7\11\17\0\4\10\32\0\5\10\20\0\2\11\51\0"+
"\6\10\17\0\1\11\40\0\20\11\40\0\15\10\4\0\1\10\40\0"+
"\1\11\4\0\1\11\2\0\12\11\1\0\1\11\3\0\5\11\6\0"+
"\1\11\1\0\1\11\1\0\1\11\1\0\4\11\1\0\3\11\1\0"+
"\7\11\46\0\44\11\u0e81\0\3\11\31\0\11\11\6\10\1\0\5\11"+
"\2\0\3\11\6\0\124\11\4\0\2\10\2\0\2\11\2\0\136\11"+
"\6\0\50\11\4\0\136\11\21\0\30\11\u0248\0\u19b6\11\112\0\u51a6\11"+
"\132\0\u048d\11\u0773\0\u2ba4\11\u215c\0\u012e\11\322\0\7\11\14\0\5\11"+
"\5\0\1\11\1\10\12\11\1\0\15\11\1\0\5\11\1\0\1\11"+
"\1\0\2\11\1\0\2\11\1\0\154\11\41\0\u016b\11\22\0\100\11"+
"\2\0\66\11\50\0\14\11\44\0\4\10\17\0\2\11\30\0\3\11"+
"\31\0\1\11\6\0\3\11\1\0\1\11\1\0\207\11\2\0\1\10"+
"\4\0\1\11\13\0\12\10\7\0\32\11\4\0\1\11\1\0\32\11"+
"\12\0\132\11\3\0\6\11\2\0\6\11\2\0\6\11\2\0\3\11"+
"\3\0\2\11\3\0\2\11\22\0\3\10\4\0";
* Translates characters to character classes
final private static char [] yycmap = yy_unpack_cmap(yycmap_packed);
* Translates a state to a row index in the transition table
final private static int yy_rowMap [] = {
0, 42, 84, 126, 168, 126, 210, 126, 252, 294,
336, 378, 126, 126, 420, 462, 504, 126, 126, 126,
126, 126, 126, 126, 126, 126, 126, 546, 126, 588,
126, 630, 672, 714, 756, 126, 126, 798, 840, 882,
126, 924, 966, 1008, 1050, 336, 1092, 1134, 1176, 1218,
126, 126, 126, 126, 126, 126, 126, 126, 126, 126,
126, 126, 126, 126, 1260, 1302, 1344, 1386, 1428, 1470,
1512, 1554, 126, 1596, 1638, 1680, 1722, 126, 126, 126,
126, 126, 126, 126, 1764, 294, 1806, 294, 294
* The packed transition table of the DFA
final private static String yy_packed =
"\1\4\1\5\2\6\1\7\1\10\1\11\1\12\1\4"+
"\1\12\1\13\1\14\1\4\1\15\1\16\1\4\1\17"+
"\3\12\1\20\3\12\1\21\1\22\1\23\1\24\1\25"+
"\1\26\1\27\1\30\1\31\1\32\1\33\1\34\1\35"+
"\1\36\1\37\1\40\1\41\1\12\1\42\1\43\1\44"+
"\12\42\1\45\1\42\1\46\32\42\1\47\1\50\1\51"+
"\13\47\1\4\1\52\32\47\54\0\1\6\53\0\1\53"+
"\1\54\52\0\1\12\1\55\4\12\4\0\11\12\20\0"+
"\1\12\6\0\6\12\4\0\11\12\20\0\1\12\12\0"+
"\2\56\1\57\47\0\2\14\1\57\43\0\6\12\4\0"+
"\1\12\1\60\7\12\20\0\1\12\6\0\6\12\4\0"+
"\5\12\1\61\3\12\20\0\1\12\6\0\6\12\4\0"+
"\2\12\1\62\6\12\20\0\1\12\43\0\1\63\54\0"+
"\1\64\51\0\1\65\51\0\1\66\3\0\1\42\2\0"+
"\12\42\1\0\1\42\1\0\32\42\2\0\1\44\47\0"+
"\2\67\1\0\12\67\1\70\1\71\1\72\1\73\1\74"+
"\2\67\1\75\3\67\1\76\20\67\1\77\15\0\1\100"+
"\36\0\1\51\47\0\2\67\1\0\12\67\1\101\1\102"+
"\1\103\1\104\1\105\2\67\1\106\3\67\1\104\20\67"+
"\1\107\1\53\1\110\1\111\47\53\52\112\6\0\6\55"+
"\4\0\11\55\20\0\1\55\12\0\2\57\44\0\6\12"+
"\4\0\2\12\1\113\6\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\114\2\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\115\2\12\20\0\1\12\15\0\1\116"+
"\51\0\1\117\51\0\1\120\51\0\1\121\51\0\1\122"+
"\51\0\1\123\51\0\1\124\36\0\1\111\47\0\5\112"+
"\1\125\44\112\6\0\6\12\4\0\3\12\1\126\5\12"+
"\20\0\1\12\6\0\6\12\4\0\7\12\1\127\1\12"+
"\20\0\1\12\6\0\6\12\4\0\6\12\1\130\2\12"+
"\20\0\1\12\4\112\1\111\1\125\44\112\6\0\6\12"+
"\4\0\3\12\1\131\5\12\20\0\1\12";
* The transition table of the DFA
final private static int yytrans [] = yy_unpack(yy_packed);
/* error codes */
final private static int YY_UNKNOWN_ERROR = 0;
final private static int YY_ILLEGAL_STATE = 1;
final private static int YY_NO_MATCH = 2;
final private static int YY_PUSHBACK_2BIG = 3;
/* error messages for the codes above */
final private static String YY_ERROR_MSG[] = {
"Unkown internal scanner error",
"Internal error: unknown state",
"Error: could not match input",
"Error: pushback value was too large"
* YY_ATTRIBUTE[aState] contains the attributes of state <code>aState</code>
private final static byte YY_ATTRIBUTE[] = {
0, 0, 0, 9, 1, 9, 1, 9, 1, 1, 1, 1, 9, 9, 1, 1,
1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 1, 9, 1, 9, 1,
1, 1, 1, 9, 9, 1, 1, 1, 9, 1, 0, 0, 1, 0, 1, 1,
1, 1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
1, 1, 1, 1, 1, 1, 1, 1, 9, 0, 1, 1, 1, 9, 9, 9,
9, 9, 9, 9, 0, 1, 1, 1, 1
/** the input device */
private java.io.Reader yy_reader;
/** the current state of the DFA */
private int yy_state;
/** the current lexical state */
private int yy_lexical_state = YYINITIAL;
/** this buffer contains the current text to be matched and is
the source of the yytext() string */
private char yy_buffer[] = new char[16384];
/** the textposition at the last accepting state */
private int yy_markedPos;
/** the textposition at the last state to be included in yytext */
private int yy_pushbackPos;
/** the current text position in the buffer */
private int yy_currentPos;
/** startRead marks the beginning of the yytext() string in the buffer */
private int yy_startRead;
/** endRead marks the last character in the buffer, that has been read
from input */
private int yy_endRead;
/** number of newlines encountered up to the start of the matched text */
private int yyline;
/** the number of characters up to the start of the matched text */
private int yychar;
* the number of characters from the last newline up to the start of the
* matched text
private int yycolumn;
* yy_atBOL == true <=> the scanner is currently at the beginning of a line
private boolean yy_atBOL;
/** yy_atEOF == true <=> the scanner has returned a value for EOF */
private boolean yy_atEOF;
/** denotes if the user-EOF-code has already been executed */
private boolean yy_eof_done;
/* user code: */
StringBuffer string = new StringBuffer();
private InContestoParser mContesto = null;
private Symbol symbol(int type) {
return new JavaSymbol(type, yyline+1, yycolumn+1);
private Symbol symbol(int type, Object value) {
return new JavaSymbol(type, yyline+1, yycolumn+1, value);
private Symbol axSymbol(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
tipo = AxSym.VAR_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.VAR_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
tipo = AxSym.VAR_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
private Symbol axMetodo(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
tipo = AxSym.MET_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.MET_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
tipo = AxSym.MET_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
* Set the reader and reset variables
public void setReader(java.io.Reader in) {
this.yy_lexical_state = YYINITIAL;
this.yy_atEOF = false;
this.yy_atBOL = false;
this.yy_eof_done = false;
this.yy_state = 0;
this.yy_pushbackPos = 0;
this.yy_markedPos = 0;
this.yy_currentPos = 0;
this.yy_startRead = 0;
this.yy_endRead = 0;
this.yyline = 0;
this.yychar = 0;
this.yycolumn = 0;
this.yy_reader = in;
public void setContesto(InContestoParser xpContesto) {
mContesto = xpContesto;
public InContestoParser getContesto() {
return mContesto;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
public AxScanner() throws java.io.IOException { this(System.in); }
* Creates a new scanner
* There is also a java.io.InputStream version of this constructor.
* @param in the java.io.Reader to read input from.
AxScanner(java.io.Reader in) {
this.yy_reader = in;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
AxScanner(java.io.InputStream in) {
this(new java.io.InputStreamReader(in));
* Unpacks the compressed DFA transition table.
* @param packed the packed transition table
* @return the unpacked transition table
private static int [] yy_unpack(String packed) {
int [] trans = new int[1848];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 492) {
int count = packed.charAt(i++);
int value = packed.charAt(i++);
value--;
do trans[j++] = value; while (--count > 0);
return trans;
* Unpacks the compressed character translation table.
* @param packed the packed character translation table
* @return the unpacked character translation table
private static char [] yy_unpack_cmap(String packed) {
char [] map = new char[0x10000];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 1614) {
int count = packed.charAt(i++);
char value = packed.charAt(i++);
do map[j++] = value; while (--count > 0);
return map;
* Gets the next input character.
* @return the next character of the input stream, EOF if the
* end of the stream is reached.
* @exception IOException if any I/O-Error occurs
private int yy_advance() throws java.io.IOException {
/* standard case */
if (yy_currentPos < yy_endRead) return yy_buffer[yy_currentPos++];
/* if the eof is reached, we don't need to work hard */
if (yy_atEOF) return YYEOF;
/* otherwise: need to refill the buffer */
/* first: make room (if you can) */
if (yy_startRead > 0) {
System.arraycopy(yy_buffer, yy_startRead,
yy_buffer, 0,
yy_endRead-yy_startRead);
/* translate stored positions */
yy_endRead-= yy_startRead;
yy_currentPos-= yy_startRead;
yy_markedPos-= yy_startRead;
yy_pushbackPos-= yy_startRead;
yy_startRead = 0;
/* is the buffer big enough? */
if (yy_currentPos >= yy_buffer.length) {
/* if not: blow it up */
char newBuffer[] = new char[yy_currentPos*2];
System.arraycopy(yy_buffer, 0, newBuffer, 0, yy_buffer.length);
yy_buffer = newBuffer;
/* finally: fill the buffer with new input */
int numRead = yy_reader.read(yy_buffer, yy_endRead,
yy_buffer.length-yy_endRead);
if ( numRead == -1 ) return YYEOF;
yy_endRead+= numRead;
return yy_buffer[yy_currentPos++];
* Closes the input stream.
final public void yyclose() throws java.io.IOException {
yy_atEOF = true; /* indicate end of file */
yy_endRead = yy_startRead; /* invalidate buffer */
yy_reader.close();
* Returns the current lexical state.
final public int yystate() {
return yy_lexical_state;
* Enters a new lexical state
* @param newState the new lexical state
final public void yybegin(int newState) {
yy_lexical_state = newState;
* Returns the text matched by the current regular expression.
final public String yytext() {
return new String( yy_buffer, yy_startRead, yy_markedPos-yy_startRead );
* Returns the length of the matched text region.
final public int yylength() {
return yy_markedPos-yy_startRead;
* Reports an error that occured while scanning.
* @param errorCode the code of the errormessage to display
private void yy_ScanError(int errorCode) {
try {
System.out.println(YY_ERROR_MSG[errorCode]);
catch (ArrayIndexOutOfBoundsException e) {
System.out.println(YY_ERROR_MSG[YY_UNKNOWN_ERROR]);
System.exit(1);
* Pushes the specified amount of characters back into the input stream.
* They will be read again by then next call of the scanning method
* @param number the number of characters to be read again.
* This number must not be greater than yylength()!
private void yypushback(int number) {
if ( number > yylength() )
yy_ScanError(YY_PUSHBACK_2BIG);
yy_markedPos -= number;
* Contains user EOF-code, which will be executed exactly once,
* when the end of file is reached
private void yy_do_eof() throws java.io.IOException {
if (!yy_eof_done) {
yy_eof_done = true;
yyclose();
* Resumes scanning until the next regular expression is matched,
* the end of input is encountered or an I/O-Error occurs.
* @return the next token
* @exception IOException if any I/O-Error occurs
public java_cup.runtime.Symbol next_token() throws java.io.IOException {
int yy_input;
int yy_action;
while (true) {
boolean yy_counted = false;
for (yy_currentPos = yy_startRead; yy_currentPos < yy_markedPos;
yy_currentPos++) {
switch (yy_buffer[yy_currentPos]) {
case '\r':
yyline++;
yycolumn = 0;
yy_counted = true;
break;
case '\n':
if (yy_counted)
yy_counted = false;
else {
yyline++;
yycolumn = 0;
break;
default:
yy_counted = false;
yycolumn++;
if (yy_counted) {
if ( yy_advance() == '\n' ) yyline--;
if ( !yy_atEOF ) yy_currentPos--;
yy_action = -1;
yy_currentPos = yy_startRead = yy_markedPos;
yy_state = yy_lexical_state;
yy_forAction: {
while (true) {
yy_input = yy_advance();
if ( yy_input == YYEOF ) break yy_forAction;
int yy_next = yytrans[ yy_rowMap[yy_state] + yycmap[yy_input] ];
if (yy_next == -1) break yy_forAction;
yy_state = yy_next;
int yy_attributes = YY_ATTRIBUTE[yy_state];
if ( (yy_attributes & 1) > 0 ) {
yy_action = yy_state;
yy_markedPos = yy_currentPos;
if ( (yy_attributes & 8) > 0 ) break yy_forAction;
switch (yy_action) {
case 83:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\b')); }
case 90: break;
case 82:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\f')); }
case 91: break;
case 81:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\r')); }
case 92: break;
case 80:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\t')); }
case 93: break;
case 78:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\"')); }
case 94: break;
case 77:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\'')); }
case 95: break;
case 88:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(false)); }
case 96: break;
case 87:
{ return symbol(AxSym.NULL_LITERAL); }
case 97: break;
case 85:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(true)); }
case 98: break;
case 79:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\\')); }
case 99: break;
case 71:
case 72:
{ /* ignore */ }
case 100: break;
case 63:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character(yytext().charAt(0))); }
case 101: break;
case 62:
{ string.append( '\b' ); }
case 102: break;
case 61:
{ string.append( '\n' ); }
case 103: break;
case 60:
{ string.append( '\f' ); }
case 104: break;
case 59:
{ string.append( '\r' ); }
case 105: break;
case 58:
{ string.append( '\t' ); }
case 106: break;
case 57:
{ string.append( '\\' ); }
case 107: break;
case 56:
{ string.append( '\"' ); }
case 108: break;
case 55:
{ string.append( '\'' ); }
case 109: break;
case 25:
{ return symbol(AxSym.PLUS); }
case 110: break;
case 24:
{ return symbol(AxSym.COMMA); }
case 111: break;
case 23:
{ return symbol(AxSym.SEMI); }
case 112: break;
case 22:
{ return symbol(AxSym.RQUADRA); }
case 113: break;
case 21:
{ return symbol(AxSym.LQUADRA); }
case 114: break;
case 20:
{ return symbol(AxSym.RGRAFFA); }
case 115: break;
case 19:
{ return symbol(AxSym.LGRAFFA); }
case 116: break;
case 18:
{ return symbol(AxSym.RPAREN); }
case 117: break;
case 17:
{ return symbol(AxSym.LPAREN); }
case 118: break;
case 3:
case 37:
case 38:
case 41:
{ throw new RuntimeException("Illegal character \""+yytext()+"\" at line "+yyline+", column "+yycolumn); }
case 119: break;
case 4:
case 5:
{ /*return symbol(AxSym.INVIO);*/ /* ignore */ }
case 120: break;
case 6:
{ return symbol(AxSym.DIVIDE); }
case 121: break;
case 7:
{ return symbol(AxSym.TIMES); }
case 122: break;
case 8:
case 9:
case 14:
case 15:
case 16:
case 47:
case 48:
case 49:
case 74:
case 75:
case 76:
case 86:
{ return axSymbol(yytext()); }
case 123: break;
case 10:
case 11:
{ return symbol(AxSym.INTEGER_LITERAL, new Integer(yytext())); }
case 124: break;
case 12:
{ yybegin(STRING); string.setLength(0); }
case 125: break;
case 13:
{ yybegin(CHARLITERAL); }
case 126: break;
case 26:
{ return symbol(AxSym.MINUS); }
case 127: break;
case 27:
{ return symbol(AxSym.ORB); }
case 128: break;
case 28:
{ return symbol(AxSym.ANDB); }
case 129: break;
case 29:
{ return symbol(AxSym.GT); }
case 130: break;
case 30:
{ return symbol(AxSym.EQ); }
case 131: break;
case 31:
{ return symbol(AxSym.LT); }
case 132: break;
case 32:
{ return symbol(AxSym.NEG); }
case 133: break;
case 33:
{ string.append( yytext() ); }
case 134: break;
case 34:
case 35:
{ throw new RuntimeException("Unterminated string at end of line"); }
case 135: break;
case 36:
{ yybegin(YYINITIAL); return symbol(AxSym.STRING_LITERAL, string.toString()); }
case 136: break;
case 39:
case 40:
{ throw new RuntimeException("Unterminated character literal at end of line"); }
case 137: break;
case 44:
{ return axMetodo(yytext()); }
case 138: break;
case 46:
{ return symbol(AxSym.FLOATING_POINT_LITERAL, new Float(yytext())); }
case 139: break;
case 50:
{ return symbol(AxSym.DUEP); }
case 140: break;
case 51:
{ return symbol(AxSym.GE); }
case 141: break;
case 52:
{ return symbol(AxSym.LE); }
case 142: break;
case 53:
{ return symbol(AxSym.NE); }
case 143: break;
case 54:
case 64:
case 65:
case 66:
case 67:
case 68:
case 69:
case 70:
{ throw new RuntimeException("Illegal escape sequence \""+yytext()+"\""); }
case 144: break;
default:
if (yy_input == YYEOF && yy_startRead == yy_currentPos) {
yy_atEOF = true;
yy_do_eof();
{ return new java_cup.runtime.Symbol(AxSym.EOF);
else {
yy_ScanError(YY_NO_MATCH);
}I setted use Javac checkbox and it worked ???
Could someone explain me what happened ?
The problem seems to be in the very long privated final string I defined, making it shorther the problem is solved again .
Tks
Tullio -
"problem with shortcut/fatal error during installation" on other user accts
I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you. -
What kind of external microphone can I use with the MacBook Pro?
What kind of microphone can I use with GarageBand in MacBook Pro ?
It depends which MBP you have. Some of the newer ones don't have an audio in port, so you need a USB adapter with an audio in jack.
-
BUG: Internal compilation error, terminated with a fatal exception
After downloading the new Oracle JDeveloper 10g production, migrating all my projects, everytime I try to make/rebuild any file or package, I get the following error:
Internal compilation error, terminated with a fatal exception
This happens if use either JAVAC or OJC.
Regards,
Yaniv KundaI think the error reporting is wrong, since dbMessages.java is a translated SQLJ file, and the specified method exists in the SQLJ file around that line number - and not in the java file resulting from the translation.
Note that line 2958, in the SQLJ file, was the simple MessageHeader.Iter messageHeaderIter; line.
The definition of this class, is in a SQLJ file, which content is:
package telemessage.db.impl.iterators;
import java.sql.Timestamp;
* Contains an iterator for viewing message headers in folder view.
public class MessageHeader {
#sql public static iterator Iter (
long MESSAGE_ID,
String RANDOM_KEY,
Timestamp DATE_SENT_BY_USER,
short TYPE,
long MESSAGE_SIZE,
int ATTACHMENT_COUNT,
String SUBJECT,
String FROM_DISPLAY,
String TO_DISPLAY,
Long POLLER_ACCOUNT_ID,
long DEVICE_ID,
short DEVICE_STATE,
short DEVICE_BLOCKING,
Integer DEVICE_BLOCKED_FROM,
Integer DEVICE_BLOCKED_UNTIL,
short DEVICE_TYPE,
byte DEVICE_SUB_TYPE,
String DEVICE_VALUE,
String DEVICE_DESCRIPTION,
boolean READ,
String TEXT,
boolean ESCALATING,
int DESCENDANT_COUNT,
short STATUS
}I have pasted the original source of this method, both before and after SQLJ translation.
before:
public static MessageEntries getMessageDescendants(DBThread db, long messageID, boolean isRoot)
throws SQLException, DBException {
List messagesList = new ArrayList();
MessageHeader.Iter messageHeaderIter;
#sql [db.ctx] messageHeaderIter = {
select
m.ID MESSAGE_ID,
m.RANDOM_KEY,
m.DATE_SENT_BY_USER,
m.TYPE,
m.MESSAGE_SIZE,
m.ATTACHMENT_COUNT,
m.SUBJECT,
m.FROM_DISPLAY,
m.TO_DISPLAY,
m.POLLER_ACCOUNT_ID,
-1 DEVICE_ID,
-1 DEVICE_STATE,
-1 DEVICE_BLOCKING,
null DEVICE_BLOCKED_FROM,
null DEVICE_BLOCKED_UNTIL,
-1 DEVICE_TYPE,
-1 DEVICE_SUB_TYPE,
null DEVICE_VALUE,
null DEVICE_DESCRIPTION,
1 READ,
select tm.TEXT
from TEXT_MESSAGES tm
where
tm.MESSAGE_ID = m.ID
and rownum = 1
) TEXT,
0 ESCALATING,
0 DESCENDANT_COUNT,
-1 STATUS
from
MESSAGES m
start with
m.ID = decode(:isRoot,
1,:messageID,
select m2.ID
from MESSAGES m2
where m2.ORIGINAL_MESSAGE_ID is null
start with m2.ID = :messageID
connect by m2.ID = prior m2.ORIGINAL_MESSAGE_ID
connect by
prior m.ID = m.ORIGINAL_MESSAGE_ID
order by
m.DATE_SENT_BY_USER desc
while (messageHeaderIter.next()) {
MessageEntry messageEntry = new MessageEntry(
messageHeaderIter.FROM_DISPLAY(),
messageHeaderIter.TO_DISPLAY(),
messageHeaderIter.SUBJECT(),
messageHeaderIter.MESSAGE_SIZE(),
messageHeaderIter.RANDOM_KEY(),
messageHeaderIter.MESSAGE_ID(),
messageHeaderIter.DATE_SENT_BY_USER(),
messageHeaderIter.TYPE(),
messageHeaderIter.ATTACHMENT_COUNT(),
null, // pollerAccount
0, // senderID
null, // sentFromDevice
messageHeaderIter.READ(),
messageHeaderIter.TEXT(),
messageHeaderIter.ESCALATING(),
0, // descendantsCount - not relevant for this query
messageHeaderIter.STATUS()
messagesList.add(messageEntry);
db.checkTimeout(); // potential time-consuming loop
}//while
messageHeaderIter.close();
long[] allEntriesMessageIDs = new long[messagesList.size()];
for (int i = 0; i < allEntriesMessageIDs.length; i++) {
allEntriesMessageIDs[i] = ((MessageEntry)messagesList.get(i)).getMessageContainerID();
return new MessageEntries(messagesList, 0, allEntriesMessageIDs, null);
} // getMessageDescendants
after:
public static MessageEntries getMessageDescendants(DBThread db, long messageID, boolean isRoot)
throws SQLException, DBException {
List messagesList = new ArrayList();
MessageHeader.Iter messageHeaderIter;
/*@lineinfo:generated-code*//*@lineinfo:2959^3*/
// #sql [db.ctx] messageHeaderIter = { select
// m.ID MESSAGE_ID,
// m.RANDOM_KEY,
// m.DATE_SENT_BY_USER,
// m.TYPE,
// m.MESSAGE_SIZE,
// m.ATTACHMENT_COUNT,
// m.SUBJECT,
// m.FROM_DISPLAY,
// m.TO_DISPLAY,
// m.POLLER_ACCOUNT_ID,
// -1 DEVICE_ID,
// -1 DEVICE_STATE,
// -1 DEVICE_BLOCKING,
// null DEVICE_BLOCKED_FROM,
// null DEVICE_BLOCKED_UNTIL,
// -1 DEVICE_TYPE,
// -1 DEVICE_SUB_TYPE,
// null DEVICE_VALUE,
// null DEVICE_DESCRIPTION,
// 1 READ,
// select tm.TEXT
// from TEXT_MESSAGES tm
// where
// tm.MESSAGE_ID = m.ID
// and rownum = 1
// ) TEXT,
// 0 ESCALATING,
// 0 DESCENDANT_COUNT,
// -1 STATUS
// from
// MESSAGES m
// start with
// m.ID = decode(:isRoot,
// 1,:messageID,
// select m2.ID
// from MESSAGES m2
// where m2.ORIGINAL_MESSAGE_ID is null
// start with m2.ID = :messageID
// connect by m2.ID = prior m2.ORIGINAL_MESSAGE_ID
// connect by
// prior m.ID = m.ORIGINAL_MESSAGE_ID
// order by
// m.DATE_SENT_BY_USER desc
sqlj.runtime.ConnectionContext __sJT_connCtx = db.ctx;
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
boolean __sJT_1 = isRoot;
long __sJT_2 = messageID;
long __sJT_3 = messageID;
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, dbMessages_SJProfileKeys.getKey(0), 39);
try
__sJT_stmt.setBoolean(1, __sJT_1);
__sJT_stmt.setLong(2, __sJT_2);
__sJT_stmt.setLong(3, __sJT_3);
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
messageHeaderIter = new MessageHeader.Iter(__sJT_result);
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:3008^3*/
while (messageHeaderIter.next()) {
MessageEntry messageEntry = new MessageEntry(
messageHeaderIter.FROM_DISPLAY(),
messageHeaderIter.TO_DISPLAY(),
messageHeaderIter.SUBJECT(),
messageHeaderIter.MESSAGE_SIZE(),
messageHeaderIter.RANDOM_KEY(),
messageHeaderIter.MESSAGE_ID(),
messageHeaderIter.DATE_SENT_BY_USER(),
messageHeaderIter.TYPE(),
messageHeaderIter.ATTACHMENT_COUNT(),
null, // pollerAccount
0, // senderID
null, // sentFromDevice
messageHeaderIter.READ(),
messageHeaderIter.TEXT(),
messageHeaderIter.ESCALATING(),
0, // descendantsCount - not relevant for this query
messageHeaderIter.STATUS()
messagesList.add(messageEntry);
db.checkTimeout(); // potential time-consuming loop
}//while
messageHeaderIter.close();
long[] allEntriesMessageIDs = new long[messagesList.size()];
for (int i = 0; i < allEntriesMessageIDs.length; i++) {
allEntriesMessageIDs[i] = ((MessageEntry)messagesList.get(i)).getMessageContainerID();
return new MessageEntries(messagesList, 0, allEntriesMessageIDs, null);
} // getMessageDescendants -
Internal compilation error, terminated with a fatal exception
Hi there,
I am getting the following error when I try to rebuild my application:
Internal compilation error, terminated with a fatal exception
It was working fine till yesterday. I tried to reinstall the Jdevelolper wihout any success. Any help will be appreciated. I am using jdeveloper 10.1.2.1.0 build 1913
ThanksHi..
I am also facing the same problem..
My whole project was working fine..and when I was just about to deploy in Server , I am getting this error.
"Internal compilation error, terminated with a fatal exception"
If anyone knows how to resolve it, please let us know..
Thanks in Advance,
Nisha
Maybe you are looking for
-
There are lots of posts on this but not exactly as it's happened in this case. I have read thru all the posts and was able to recover some files but not all. Apparently MAIL was quiting and when data was imported, acct settings were changed. There we
-
Error targeting server for the EJB module while deploying the sample banking application
I am currently having a very difficult time attempting to deploy the example banking application that I downloaded from the BEA website. I have followed all of the steps in the "Hands On: Deploying the Sample Banking Application" document, and I do f
-
Need advice on airport set up (home network)
hi all, i am just wondering what the best set up would be for my home network, listed below are what i have set up, and what i think could be the best setup i have an office upstairs which contains: -ADSL2 modem -iMac 802.11n -PC wired -printer -750G
-
How can I get the system date in mm/dd/yyyy,
how can I get the system date in mm/dd/yyyy, i need to compare system date with some other date,continuosly using threads,can U plz help me. With Some code Thanks In advnace Mahiiii
-
Submit statement without executing AT SELECTION SCREEN event
hi, In my report since the input data is very large iam spliiting the input data batch by batch. Iam executing the report for the first batch input data and retriving the results for it. Then to find the result for the enxt batch input data , ia