No microphone while mix

I can't seem to get volume through front or rear mic jacks when I'm mixing li've on the net. People saying? they hear the music fine but my voice is very low. I have mic volume all the way up but no change in volume. I tried recording voice in what you here mode and in microphone mode, no change. The meter is moving in the control panel showing my voice is detected but it is not being heard over the net. Even my smart recorder meter is showing movement but still I get complaints of low mic volume. I have creative soundblaster x-fi extreme music SBO 730 witch is a oem preinstalled card but seems to respond to the new vista drivers for x-fi. Only the mic issue is my problem. I run a nvidia 680i SL chipset with a ECS PN2 SL+ motherboard powerd by a Intel 2 quad Q6600(2.4ghz 8mg cache 066 mhz fsb). Running on vista 32 bit os. I'd like to use the front or top mounted mic and speaker jacks opposed to the rear sound card jacks but will take which ever I can get to work. If you dj and have mic problems please respond. If you had mic?output issues please respond Thank you.

I would like you to try the following.
Click Start, type "Device Manager," and press Enter.
Expand the "Sound, video, and game controllers" section.
Right click on your audio device and select "Uninstall." Remove driver only if prompted.
Close these windows.
Click Start, type "uninstall a program," and press Enter.
Find Skype on this list and uninstall it.
Reboot your notebook. When Windows starts it should automatically re-install your audio driver.
After the installation is complete you will want to install Skype. Here is a link to the latest version.
When Skype is installed go to the audio settings once again and verify that your microphone is selected and the volume is set to max.
Use Skype and verify whether or not your microphone is working.
Post the result.
I will await your response to see if this resolves your issue. I hope you have a great day
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

How do I mute internal microphone while recording video in new ipad

Is it possible to mute internal microphone while recording video in new ipad

No. There is no setting to mute the mic.

Microphone bytearray mix and replay

Hello i need your help
I have an application with microphone record and i mix another sound from song. For this step is ok i can save to my desktop and the mix is good.
But i would like to play my mix from bytearray. And is there i have a problem.
The sound is very slow....... and not same that my file save.
My code:
var epos:Number=0
//ByteArray in which the microphone sound data is stored
var soundBytes:ByteArray = new ByteArray();
//Gets your default microphone
var mic:Microphone = Microphone.getMicrophone();
Security.showSettings("microphone");
function init(){
    //Sets the minimum input level that should be considered sound
    mic.setSilenceLevel(0);
    //The amount by which the microphone boosts the signal.
    mic.gain = 50;
    //The rate at which the microphone is capturing sound, in kHz.
    mic.rate = 44;
//function called when start Record button is clicked
function startRecord():void
    mic.addEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
//function called when stop Record button is clicked
function stopRecord():void
    mic.removeEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
function micSampleDataHandler(event:SampleDataEvent):void
    var temp:ByteArray=new ByteArray()
    var mdata:ByteArray=event.data
    var l:Number=mdata.bytesAvailable
    sound_kar.extract(temp,l/4,epos);
    temp.position=0
    var b:Number=temp.bytesAvailable
    epos+=l/4
    var s1,s2,s3:Number
    while (mdata.bytesAvailable)
        s3= mdata.readFloat();
        s1=0
        s2=0
        if(temp.bytesAvailable>=8){
        s1=temp.readFloat()
        s2=temp.readFloat()
        mixTracks(s1,s2,s3);
function mixTracks(l:Number,r:Number,m:Number):void
    //the function which mixes the microphone audio with background audio...
    var sampleT1_L:Number;
    var sampleT1_R:Number;
    var sampleT2:Number;
    var trackL:Number;
    var trackR:Number;
    sampleT1_L = l;
    sampleT1_R = r;
    sampleT2 = m;
    trackL = (sampleT1_L + sampleT2);
    trackR = (sampleT1_R + sampleT2);
    trackL = trackL > 1 ? 1:trackL;
    trackR = trackR > 1 ? 1:trackR;
    trackL = trackL < -1 ? -1:trackL;
    trackR = trackR < -1 ? -1:trackR;
    mixedTrack.writeFloat(trackL);
    mixedTrack.writeFloat(trackR);
For replay mix:
mixedTrack.position = 0;
soundPlay.addEventListener(SampleDataEvent.SAMPLE_DATA, playbackSampleHandler);
channelPlay = soundPlay.play();
function playbackSampleHandler(event:SampleDataEvent):void
    if (!mixedTrack.bytesAvailable > 0)//if end; return
        return;
    for (var i:int = 0; i < 8192/(44/44); i++){
            var sample:Number = 0;
                if (mixedTrack.bytesAvailable > 0)
                    sample = mixedTrack.readFloat();
                //write sample, i.e., play
                for(var j:int=0; j<int((44.0/44)*2);j++){//4 for 22 khz?for 8khz
                    event.data.writeFloat(sample);
Can you help me to replay my mix in bytearray?
Thanks a lot
Oeann

hello i really need your help and excuse me for my english... i speak french..
i change my function
function playbackSampleHandler(event:SampleDataEvent):void
    for (var i:int = 0; i < 8192 && mixedTrack.bytesAvailable > 0; i++)
                      var sample:Number = mixedTrack.readFloat();
                      event.data.writeFloat(sample);
                      event.data.writeFloat(sample);
the sound play is very slowly......
can you help me and tell me what i doing wrong?
Thanks again

Useless microphone while recording videos.-.

My iPhones microphone is not working when I play the recorded videos from my device all I hear is loud cracking sounds and faint voices, while doing Skype and regular cellular calls and voice memos it works absolutely normal but when it comes to recording videos it becomes useless.

Hi Dcypha13,
Thanks for visiting Apple Support Communities.
If one of the microphones on your iPhone is not working, I recommend these troubleshooting steps:
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
Make sure that the latest version of iOS is installed.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
You can find these steps and more information here:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Best,
Jeremy

I cannot figure out how to turn off the iPad2 microphone while I am playing through the guitar amps... What am I doing wrong ?

When using Apogee Jam to connect my guitar to my iPad2,
the iPad internal microphone continues to record ambient room sounds.
How can I turn this off ?
Please help :)
Thanks in advance

This seems to be a bug with iOS 5 with garageband and using external input sources.
I have apogee jam and getting same problem.
Also getting problems using Alesis io dock. Same kinda thing as the apogee just a little more advanced.
Amps are going nuts when I change from one to another using io dock and also I'm grt pops and crackles where it used to be cristal clear. I want iOS 4 back as both apogee and Alesis io dock were working perfect.
This is crap as its the reason I got the iPad.
This seems to be a big problem.
I'm sick of restarting the iPad (re set) to get to work.
Apple please fix as this *****.

Can talk with Netbook S10e built-in microphone while using Google Voice?

Just installed Google Voice and talked with an external microphone. However, It seemed to me
I can not talk with the built-in microphone. Am I righyt?
TIA,
Jeffrey
Solved!
Go to Solution.

right click to the volume icon on the left bottom side on your desktop > recording devices > recording > and make sure your current microphone device is default.

How can i use a garageband effect on a live microphone while recording?

hi, i am recording a vocal track on garageband, using an m-audio fast track, does anyone know how i can use the effects of gb, so that i can hear them in my earphones while i am recording??? thank you!

Make sure you have GarageBand,s output set to what you have your headphone plugged into.
And turn on monitoring for the track.

Saving swatches for CMYK while mixing it in RGB?

My document is in RGB mode and I mixed the colors with the RGB sliders, though I am still able to save this swatch for CMYK in the new swatch dialogue window. What is this actually doing to the color?
Thanks.

What is this actually doing to the color?
It's using the current default color profiles to convert those values. This may work for some colors, but you shouldn't let yourself be fooled. If you plan on using any of those swatches in a CMYK document and then do a calibrated proof/ preflight, you sure will get some warnings about insufficient ink densities or out of gamut colors or as a minor, it will not look like anything you expected it to... It's just the nature of the thing.
Mylenium

Can i use home sharing while mixing wired and wireless connections?

I have an HP Pavilion desktop connected to my wireless router with an Ethernet cable. My AppleTV is connected wirelessly to the 5GHz band on my simultaneous dual-band wireless-N router. How do I share photos and music from the HP desktop to the AppleTV using Home Sharing?

mikefilmguy wrote:
I have a similar problem.
I have 2 computers (and other ethernet addressable devices (printer etc) upstairs connected into a gigabit switch (d-link DG-2205) - computer A is an old 2002 G4 without wifi, computer B is a 2010 Mac mini wired into the switch. Downstairs, I have Computer C - a 2012 Mac mini connected to the fios router via wifi and there is a 1080p Apple TV connected via wifi.
Computer A (Wired switch Connection) can only see computer B's (Wired switch Connection) music library.
Computer B (Wired switch Connection) can see both computer A's and computer C's (Wireless router connection) Music library.
Computer C (Wireless router connection)) can see computer B's (Wired switch Connection) music library.
Apple TV can see computer B and C.
The problem is that computer A Is the music computer That I want to stream throughout.
If computer A and B can see each other, and computer C and AppleTV can see computer B, then why can't everyone see computer A ?
Any response appreciated.
What version of iTunes is the Computer A running - it may not support Home Sharing.

Iphone4 microphone makes static noises while I make a call using headphones?

I have iphone 4 32GB. When I make a call using headphones the microphone at bottom-left of the phone makes static noises when it comes into contact with anything.
It is really annoying as I hear loud noises while my phone is on my pocket and I am making a call using headphones.
Could you please help what could be the solution? Is this a fault with the hardware or software?
NB: I have recently installed the latest version 5.01.
Many thanks for your help.
Shaz

I found the answer myself, I actually bought earphones from a corner mobile shop for £10. and they happened to be fake and do ot disable microphone while plugged.
so the point is buy the original earphones from apple website.

Listen while record

Hi, I`m recording my voice using a Audigy 2 ZS and my headphones.
I want to listen my voice while recording but I can't, I only can listen my voice after recording when playback. I need return.
Do I need to configure my Audigy?
Can you help me?
Roberto

Robertorubio,
Unmute the Microphone from the surround mixer and you should hear your microphone while recording.
Jeremy

Automation vs. separated channel mixing?

I have a mixing question I've been dying to ask.
When it comes to mixing, a friend of mine swears by automation.
His technique is to put all lead vocals (or any similar sort, so he would put verse 1 & 2 and bridge lead on one channel) on one single channel and automate the level of that channel up and down according to the part of the song and obviously the volume he wants from the vocal part. He has left me with the impression that "That's how everyone does it".
I on the other hand have never bothered with automation when I mix a song (speaking primarily of vocal channels) unless I really have to. I simply just use more separate channels even if it is the lead vocal. So for example if it's verse 1 there are three parts of the verse that I want in different volumes, I just put all three on different channels in logic and copy the COMPRESSION, EQ setting and bus sends on each. So in the end I usually end up with between 5 or 20 audio channels just lead. I can then also obviously set EQ and COMP and whatever else I wanna do on each channel individually as the need arrises.
This to me is way faster because while mixing the entire song I can quickly get to the channel that needs adjustment and change the volume according to what I hear.
Mixing with Automation in the described scenario by my friend is just clumsy to me and harder.
Please let me in on your preferred way of mixing.... with automation and similar to the way described that my friend does it or do most of you also separate audio parts in to various channels as the needs arrises?
Of course I am always willing to learn.
Thanks.
Message was edited by: Chance Harper

I mostly use similar approaches to the very well described methods in Bill's response - except that first, I spend a lot of time (where necessary) to tweak levels within the vocal tracks in the sample editor. In there, I'll first remove pops, thumps, noises etc. I'll then change gain on individual phrases and sometimes even words or parts of words. I don't use compressors to replace riding a fader or automation.
Then, once my tracks are cleaned up, I'll often use two compressors - one dealing with undesirable remaining peaks, and one dealing with RMS levels, but mostly for the sound it gives me because of the choice of compressor, not gain control. All of this apples to other instruments too - my goal is always to get the raw tracks as close to 'right' as possible before applying anything - which goes back to the recording stage, obviously.
As I mix OTB often, automation I use is mostly to push-pull in fairly coarse increments. Using the same 'parallel' compression routing, but not actually using compression, I might apply affects to another bus, so I'm generally mixing the affected vocal track with the untreated vocal track, and sometimes swapping them for more extreme effects. As I'm often OTB at this stage I don't have a lot of options as I use the creaky old (now obsolete) Uptown automation system - or none at all on certain tracks. Somehow there's a magic that happens when there are human hands on faders during a mix, and the mix becomes another performance.
Of course, this applies mostly to the music type with which I work - roughly 80% audio, 20% virtual instruments, so everyone's techniques will be different.

Microphone delay when recording

Hello people of the creative community I'm writing to you about my soundcard, let me start from the beginning. See I bought a 5.1 soundblaster sound card and I used it for recording music and music playback and it worked perfectly. Ok about a month later the outlet on the soundcard got broken because the mic cord got pulled to hard while it was still plug into the internal soundcard, so i went out and bought a new soundcard only this time I bought the 24 bit 7.1 soundcard and everything installed perfectly only now when I try to record theres a delay in the vocals when I'm recording and I was wondering if there was something I could change in the configuration options that would fix this problem

Jacob_R wrote:
Hello people of the creative community I'm writing to you about my soundcard, let me start from the beginning. See I bought a 5.1 soundblaster sound card and I used it for recording music and music playback and it worked perfectly. Ok about a month later the outlet on the soundcard got broken because the mic cord got pulled to hard while it was still plug into the internal soundcard, so i went out and bought a new soundcard only this time I bought the 24 bit 7.1 soundcard and everything installed perfectly only now when I try to record theres a delay in the vocals when I'm recording and I was wondering if there was something I could change in the configuration options that would fix this problem
If your 24-bit card is Live! 24-bit then
- if you're using ASIO compatible software for recording --> instal Asio4All drivers
Use ASIO/Asio4All drivers with latency set as low as possible (least 5-10 ms when recording, 10-50 ms while mixing).
jutapa

SB Live! 7.1 Microphone is

I've been having some trouble with my microphone. Recently, I have been using my new soundcard, SoundBlaster Li've! 7. 24 bit The problem I am having is, though I seem to be doing everything correctly, I can't get any sound from my microphone while "what u hear" is selected in the recording options. A screenshot will make everything clear and probably help you figure out what I'm doing wrong or anything's wrong with my computer / soundccard / mic etc.
http://img80.imageshack.us/img80/644/mikrofonproblemivo8.jpg "sessiz"
in playback control is for "mute" and "sec" is for "select" in record control. My operating system is windows xp and I can get sound from my microphone when I choose "microphone" in the recording options but I need to get sound while "what u hear" is selected. Thank you allMessage Edited by ZaugnaKhaldun on 0-0-2008:8 AM

Hello i'm having the exact same problem, i've tried everything u've mentioned in you post and still unable to find solutions. What i have found that works (however only for a while) is formatting your pc, this restores the midi driver but as mentioned only temporarily lets say a few days if your lucky so whatever programme it is that you use you will see the "USB device [2]" etc pop up amongst the rest of the device drivers i.e. "windows mapper" "Creative B synthesizer external midi" hopefully when you formatt your pc this problem should be corrected permenantly however i do stress that you don't get to excited that your audio device is now working.

Mixing Batches

I'm having the material i.e solvent qty in one batch number. I received same material with other batch number. That receiving batch number will go to Quality. After analysis we will mix the two batches i.e previous one and received one with a new batch number. While mixing i activated QM '08' inspection type. While doing MB1B i'm getting two lot numbers. But i need only one lot number. How can i?

Hi Narendra,
Please set following settings in the Material master QM view to get the Single inspection Lot for when you mix the multiple batches
In Material master QM viewInspection Set up_*08-In the Control ins lot --select the 1-For each material document, material , batch,stotrage location*
Thanks,
Rajanikanth

No microphone while mix

Similar Messages

Maybe you are looking for