No MMS after v50 update

I've just updated my wife's unbranded 5800 XM Red to v50.0.005.217.08. (I don't recall the previous version.)
Bad News!
Picture messaging now doesn't work - she can no longer receive picture texts. If anyone tries to send one they get a failure notification.
How do I re-enable picture messaging, please?
Echo

Oh, no problem mate. Glad everything is working now

Similar Messages

  • Xperia Z1 can not send/receive MMS after Lollipop update

    Xperia Z1 can not send/receive MMS after Lollipop update, is anyone else having this issue. Any ideas on what I can do to restore MMS?

    MMS need a data plan, there are certain carriers/networks that allow MMS to be sent w/o a data plan to their branded/locked phones, you will have to contact your carrier/network regarding this.
    Is your phone braded or was it branded? did you flashed lollipop ? 
    @KMcFarlane
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Enabling MMS after ios8 update

    I can't send pictures to contacts that don't have an iphone.  It says to enable MMS.  Under settings - messages, it doesn't give me that option.  help!!

    Send what kind of messages? Your post does not make sense. You can send messages from the iPad if you are using iMessage or if you are linked to an iPhone account. I don't know what your problem is, since your first post said you couldn't find cellular, and then you say you cannot send messages. Can you please describe your problem, so someone can try to help?

  • HT201210 iphone 4 wont send mms after updated software

    i have iphone 4 and after i updated software cant send mms pics.should i call tech support or that can be software issue?tnx

    settings - message - turn MMS - on
    if that is already on, and still doesn't work call your phone carrier or see link http://support.apple.com/kb/ts2755

  • After new update 6.0.1 MMS stoped to work on both phones 4 and 3GS, Apple fix your problem please

    Hy Apple and others,
    After new update 6.0.1 I cannot send pictures or contacts via simple messages as I could before. The same problem has my girlfriend by using 3GS iPhone.
    Reseting iOS and other methods are useless.
    I know that the problem is because of this update and I am waiting apple to do something with it.

    Leave out the ranting and simply state what issue you are having.
    Your wall of text is hard to read.

  • Activate device wirelessly after new update?

    I just started using my old blackberry pearl 8130 again about a month ago and I realized I needed to update the software on it. When I went to do so it told me I would need to activate the device wirelessly. What does this mean? Should I worry about my phone not working correctly after I update it? Help please!!
    And a totally off subject question, but does anyone know if I will be able to send picture mail after this update? (I have Sprint and I couldn't before when it was activated and currently still can't)
    CountryGirl

    Hi and Welcome to the Community!
    After you complete the update, I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    That should get you fully connected to all of your services. If it does not, you may need to talk to your wireless service provider.
    RavenNoel wrote:
    And a totally off subject question, but does anyone know if I will be able to send picture mail after this update? (I have Sprint and I couldn't before when it was activated and currently still can't)
    Nope. It should be no different. If you are not subscribed to a data plan from Sprint that enables MMS, then doing this update will change none of that. If, on the other hand, you are subscribed to a data plan that includes MMS, then the above three steps may actually cure it. Otherwise, you need to talk to Sprint for formal support to know if it even should work or not.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 5800 v21 - v50 Update problem

    Hi
    I've just updated my 5800 ExpressMusic from v21 firmware to v50.
    I now find that my middle button doesn't work as before.
    I used to be able to press this button to bring up the menu.
    The touchscreen works, but I have nothing on my home page that will take to the main menu.
    If I press and hold the middle button, I see the icons for Menu and Home.  I can select Home OK, but If I select 'Menu', I see the Select and Exit, left and right button choices, but no main screen view of the menu icons.
    Help! 
    Echo

    Did you take Back-up before the upgrade ? If so restore using the OVI Suite and see if it makes any difference...
    Normally the experts recommend a Hard Reset after the update but try the above first.. If no difference then you may go for Hard Reset...
    ...and If you have not taken the Back-up .. you may tend to lose some data...
    Always take back-up before Updates and Resets..
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Performance reduced under Bootcamp after EFI update on Macbook Pro Retina

    after i upgraded EFI on my retina macbook pro the proformence reduced to unusable. under heavy load under bootcamp windows7. the cpu clock drops and as well as cpu clock. this is the screen shot of gpu clock monitoring from windows u can see the gpu clock is running at 270Mhz at most of the time and trying to be back to 725Mhz(yea, not 900Mhz!) when im running a graphic benchmark at same time cpu will run about 1.1Ghz as well. i noticed that it will run 10-20sec normally then CPU and GPU clock will start dropping. It's almost like speedstep is programmed backwards. My CPU is constantly running at 3.1-3.2GHz, and then as soon as a game loads, it drops to 1.2GHz. I've lost track of how many times I reset the SMC  reseting SMC PRAM, reinstalling windows using Bootcamp or even erease the entire drive and start over from network recovery MacOS did not solve this problem. so all the recent games like COD MW3, Starcraft II, BF3,or D3 will only run about about 10 fps as i was playing them with no ploblem before the EFI update.
    this is killing me! please help.
    im in NY, in this season i dont think is the overheating problem. when i check the temperature, it stays about 80C (fans will run about 4k rpm). but some time heavy loaded Mac OS cpu is about 90 degree but only with 3k rpm fan kicked in.
    i did search online, seems that some other people have the same problem with rMBP or MBA 2012.
    anyone knows if i take my macbook pro to the store, will those people work at genuines bar help me with this "windows" problem?
    thanks!

    Hey Shadowyani, please take a time and fill a bug report at http://developer.apple.com/bugreporter/ . The machine is useless for me as it is now because I develop and use very GPU/CPU demanding scientific applications, after the update my realtime applications are completely useless as they drop from something like 25fps to 9 fps even on Mac OS X (no SMC reset fixed the issue). In bootcamp the situation is worse, my software runs at 4 fps and gaming turns to be impossible to play as well.
    Please let Apple know about the problem, fill a bug report, even if SMC reset once in a while fixed the issue for you (this is not a common behaviour and must be fixed). We paid the price for cutting edge technology.
    Apple shall not do a downgrade of the system after few weeks, remember that most of reviews and benchmarks were done BEFORE the EFI Update, so people are being fooled by Apple in this sense.

  • My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

    My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

    Basics from the manual are restart, reset, restore.
    Try those

  • Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

    Hello,
    I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
    Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
    Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
    At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
    System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
    Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
    I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
    It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
    How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
    Your help is sincerely appreciated. Thanks.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Adobe Application Manager CC not working after last update

    Last night I avrived home and sat down to work on my website and other side projects after a long day at work.  I opened my application manager and it notified me that it had an update.  So naturally I agreed and was excited to see the new upgrade.  Sadly after a couple hours of trying to figure things out on to why I wasn't able to access my Adobe Muse and Adobe Application manager after the update I had to give up.   I was online with tech support about the issue and was given a link to download the application manager yet again (this would have been my 3rd attempt to do so, and the link that was given to me was outdated).  After finding out that this was going to take longer than I had hoped asked if the teck support could help me resolve the Muse issue.  I was told that I'd be transfered to the Muse support and never was after an hour or so.
    I'm now still stuck not being able to use muse (after a couple re-installs) and not able to use my application manager. 
    Currently when I lunch my application manager my backgound decktop goes black and the application manager pops up and is white with no options to choose and shows nothing.  When I try to use Muse  it askes me to log in, and then gives me an error message asking me to please try again later....
    Can anyone help, has anyone had this issue before??
    (running on a 64bit system, windows 8, Adobe CC Member)

    Hi LantzDesign,
    Could you please follow this step and let me know if it helps.
    Rename the OOBE Folder to OOBE.old from this location and relaunch Creative Cloud.
    C:\Users\(your Username)\AppData\Local\Adobe
    Regards,
    Abhijit

  • Unable to Log In After Software Update

    Hello:
    After running Software Update, I am unable to log in.
    I found the following support article:
    Mac OS X 10.5: Unable to log in after an upgrade install
    Article: TS1543
    http://support.apple.com/kb/TS1543?viewlocale=en_US
    However, upon step 8 of the instructions, the following error appears:
    delete Invalid Path
    <dscl_cmd> DS Error: -14009 (eUnknownNodeName)
    This is actually after an update (not an "upgrade"), so I'm not even sure these are the appropriate steps.
    This is the second time that I have been unable to log in after an update. The first time, I attempted to reset the password with the installation DVD; however, this resulted in "No LDAP Master" errors and I installed Mac OS X 10.5 Leopard Server on a second internal drive and configured everything again. After setting everything up on the second install, I was going to reformat the first boot drive. Unfortunately, I'm just back to where I started after running the updates. I'm not sure if having two volumes with Mac OS X Server installed makes a difference in the instructions in the article mentioned above or not.
    Another question: Is resetting the password with the installer DVD the same as using the Single User approach ("launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist", "ls /Users", then "dscl . -delete /Users/username AuthenticationAuthority")?
    If so, I'll just do that; however, I am hoping that the Single User approach might somehow avoid "No LDAP Master" errors again.
    Any suggestions are greatly appreciated.
    -Warren

    baltwo:
    Thanks! I think a week would have gone by before I realized this on my own.
    -Warren

  • HP ePrint iOS app no longer finds Photosmart C4780 after app update

    I have an HP Photosmart C4780 connected through WiFi to my network but sadly it's not supported by AirPrint on iDevices.
    So, I was using HP ePrint Home & Biz iOS app (version 4.1) which was very useful for me as it found the printer and allowed me to print from my iPad/iPhone. 
    Today I updated the app on my iPhone to version 5 (now simply named "HP ePrint" on the App Store) and after the update, the new version doesn't find my Photosmart C4780 anymore. I did the Activation thing on the iPhone, as it was requested to refresh the list of printer on my network in the All tab, but after Refresh no printer is found.
    Still I have the old 4.1 on my iPad (and hopefully in my iTunes library) and the printer is located, I assume, through mDSN as it shows the name specified for this setting.
    So, question is: Did you dropped support for Photosmart C4780 on 5.0 release of HP ePrint iOS app? If so, why did't you informed this appropriately on the app update text description in the App Store? A message like "some printers may not be supported anymore" would have been helpul.
    If HP ePrint should find Photosmart C4700 series printers and this is an issue, how should we proceed from here?
    Thanks.

    WilliamBPS, 
    I was not informed that support was removed from the app for certain printers. It may have been lost in the transition to the new updated app. I will deffinitly pass this information along as it is very important that the app supports as many printers as it can. I'll go ahead and take note of your printer model. If I find anything out about this, I'll try to give you an update in this thread. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

  • Music will not play after ios5 update, it still appears there but will not play...if I select a song, it jumps to another song but will not play anything.  Also, if I try to play any of the files on the phone from iTunes they won't play either...help!!

    No fix for getting music to play on iphone4 after ios5 update...
    Cannot find how to manually sync according to someone else's fix...
    If I try to play any of the songs already on the phone from the iTunes software, they don't play either...
    FRUSTRATING!!!   Please help!!!

    Hopefully Apple is trying to clean up this mess of an opperating system

Maybe you are looking for