No monitors pulled for self defined logical component
Hi,
I have defined a system landscape in smsy and created solution landscapes in the sm. For some systems I had to create a new logical component.
My problem: Although RFC destinations work fine, for all systems within the new logical component no monitors are pulled out of rz20.
If I use a SAP-defined logical component it works.
I use Solution Manager 3.2.
Is there any documentation for this problem or does anybody know a solution for this?
Thank you and best regards,
Tim
Hi again,
I thought about the problem and tried several things. The problem is not the self defined logical component. The problem is the product definition. I can`t monitor systems, which I created as product SAP ERP in smsy. The check "SAP System ..." doesn`t appear when I want to setup System Monitoring.
Does anybody have an idea what I do wrong?
Regards,
Tim
Similar Messages
-
How To create a maintenance project - logical component missing?
Hi experts,
we plan to activate ChaRM in our Landscape.
We don't have created a maintenance project in solution_manager cause there is a logical component missing.
I followed the instructions of the tutorial on https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
This seems to be a modified origin SAP Component.
Does anyone know where to find these component?
Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
thanks in advance
kind regards
Thomas
Helpful answers/documents will be rewarded, surely!You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
/cheers -
How to delete logical component
How to delete logical component in solution manger 4.0
Am deleting one system eatery in landscape components that time giving one warning?
Is there any option for deleting logical components?
Please give any solution for deleting system& logical components
Warning is
(Delete a system despite use
You want to delete the system PRD, but it is still being used.
You cannot delete the system as long as it is still used in logical
Components. The where-used list tells you the logical components which
Use the system. To delete the system, remove it from all logical
Components first.
You can only delete the system if it is used in system groups. The
Where-used list tells you which system groups use the system.
Warning
If you delete the system despite use in system groups, you can no longer
Access it in applications (e.g. in the Project Administration, if it is
Used in a system group of type Project Landscape).Dear Kiran,
Firstly find out where the system PRD has been added as an Logical System in an Logical Component. Remove the assignment and you should be able to delete the System.
Similarly for deleting an Logical component find out which solutions are referring to the logical component and deassign the Logical Component from the Solutions. You can then safely delete the Logical Components.
You can use the Where Used List button which looks like 3 arrow starting from an single point to different directions to find out the assignments.
Hope that this helps .
Regards
Amit -
Self-defined info structure similar to S013
dear guru ,
I want to create a self-defined info structure similar to S013.
I want to add field purchasing group from EKKO-EKGRP. The other fields are similar to S013 with the same rules.
What do you suggest i can do consider note 397864 :
You are not permitted :a) to use info structure S013 as a template for self-defined info structures (This is prevented as of Release 4.5 due to a termination message).b) to create any update rules for S013 with a self-defined update group.c) to include the enhanced update rules that are used for S013 during the definition of key figure updating into the definition of the update of a self-defined info structure (compute...).
Thanksnot answered
-
Monitoring "check aborted jobs" not possible - Logical component issue?
Hy Experts,
we are facing a problem setting up system monitoring in our Solution Manger system.
We want to check if a specified job is finished sucessfully - if it is aborted we want to receive a mail.
In another system the monitoring as described is fully functional.
In this scenario we are facing a problem:
Error Text:
The logical components SAP NW REDWOOD CRONACLE and Z_SYS_MONI have different products
Message no. SOLAR170
Diagnosis
This component change can prevent the processes and scenarios which you have copied from the BPR into the "Structure" tab, in transaction SOLAR01, from running in the assigned system, or assigned transactions, IMG activities, etc. may not exist in these systems. For example, transactions or IMG assignments copied into the previous product context do not yet exist in the project.
If the same systems are assigned to the new and old logical components, the change is not critical.
System Response
The system sends a warning and accepts the change, but no data is automatically converted or adjusted.
Procedure
If you are unsure whether your assignments will still be in the component systems after the component change, perform the function "Environment - Refresh Buffer" in the transaction SOLAR01. Errors in this program are objects which do not exist in the system.
Actual product of the logical component "Z_SYS_MONI" is ECC5.0.
The other (working) is using the logical component "SAP NETWEAVER APPLICATION SERV" instead of the above used "SAP NW REDWOOD CRONACLE "
How can this error be fixed OR
How to monitor jobs with logical component ecc5.0?
Any help will be rewarded!!!
Thanks in advance
TomDetailed Info:
The working solution is assigned to ECC 6.0 AND to SAP Netweaver 7.0 (2004s).
The selection in business process repository - it-platform - monitoring is assigned to SAP Netweaver 7.0. - but we have ECC5.0 - even if I create the system/logical component new under Netweaver 2004 (6.40) it won't work
It seems not to be possible.
But how to monitor a job in ECC5.0 - think it is possible.
Any ideas?
Please help!
OK
Seems not to be possible!
Set to solved - but this is not the way to solve problems dear SAP
Edited by: Tom on Dec 5, 2008 9:59 AM -
SFLIGHT is NOT defined for the current logical database.
I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
carrid LIKE sbook-carrid,
connid LIKE sbook-connid,
fldate LIKE sbook-fldate,
bookid LIKE sbook-bookid,
order_date LIKE sbook-order_date,
loccuram LIKE sbook-loccuram,
END OF sr.
GET sflight. <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254. -
Incorrectly defined logical table source (for fact table Facts) does not
Hi,
I have two Dimensions A and B. A is joined to B by a foreign Key.
The report works if I pull B. Column1, A.Column2.
The report is throwing an error if i try to change the order of the columns like this. A.Column2, B. Column1.
error : Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
File: odbcstatementimpl.cpp, Line: 186
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Facts) does not contain mapping for B.Column1
I am not sure where it is going wrong.
Thanks
jagadeesh
Edited by: Jagadeesh Kasu on Jun 16, 2009 4:22 PMdid you make joins in LTS or on the physical table.
try to make join in LTS if they are not there. -
Defining Logical System name for ALE using T.C- SPRO?
Hi,
Can anybody tell, how to define logical system name using T.C SPRO?
Where can I find the "Define Logical System for ALE"?
Thanks
BalajiHI,
Use the SALE transaction , there you can have all steps clearly,
please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards
Chilla.. -
Define Logical Systems and Template Names for BW Reports
Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
JavierHello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan -
Solution Manager - Logical Component for SAP Netweaver EHP2
Hello,
I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
Thank you very much
João Dimas - PortugalHi João,
You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
I hope this help you to proceed further, thanks.
Jay Soma. -
Change logical component for upgraded satellite
Hello.
After upgrading a satellite system from 4.6C to ECC6, I would like to to change the Logical component in SMSY accordingly. But cannot find an easy way to do that. I would like to keep the actual monitor, alert and reactions configuration in the current solution, and just update the Logical Component.
Actually I am afraid that I have to cancel the system, and recreate it under the new component missing all the settings.
Does anybody know if there is a non destructive way? I'm working with a 3.2 Solman.
Thanks a lot, kind regards,
DinoTry manually setting it, or change the leading product from R/3 to ECC
-
Logical Component for HANA DB system
Hi Friends,
I am doing Managed System Configuration for HANA DB system.
I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
Can some one suggest.
Thanks & Regards,
Solman StarterHi,
What is the error you are getting ?
What your solution manger version and SP level ?
Check below note and see if they help.
1958910 - EarlyWatch Alert For HANA Database
Regards -
How does one define a default style for a custom Flex component?
How does one define a default style for a custom Flex component?
hello
I created a new set of Flex component library slib.swc (Flex 4.5). Would also like to have a default style. defaults.css file, making it the default style of the component library.
Like flex the builder install directory of sdks \ 4.5.0 \ frameworks out \ libs directory has a spark.swc file, open with Winrar will see defaults.css this file. Defaults.css file defines the default style of the flex spark components.
How can it be achieved?
As follows
slib.swc contains a CLabelEx components, and a defaults.css file
defaults.css source file as follows:
@ namespace s "library :/ / ns.adobe.com / flex / spark";
@ namespace mx "library :/ / ns.adobe.com / flex / mx";
@ namespace cn "http://os.slib.cn";
cn | CLabelEx
styBackgroundAlpha: 1;
styBackgroundColor: # 569CC0;
styBorderAlpha: 1;
styBorderColor: # 569CC0;
styBorderWeight: 1;
styCornerRadius: 3;
In slib.swc the application MyLabel.mxml of the source file as follows:
<? xml version = "1.0" encoding = "utf-8"?>
<s: Application, the xmlns: fx = "http://ns.adobe.com/mxml/2009
xmlns: s = "library :/ / ns.adobe.com / flex / spark"
xmlns: mx = "library :/ / ns.adobe.com / flex / mx"
xmlns: cn = "http://os.slib.cn
the minWidth = "955" The minHeight = "600">
<fxeclarations>
</ fxeclarations>
<cn:CLabelEx x="67" y="112"/>
</ s: Application>
I hope CLabelEx default use cn | CLabelEx, style to display its appearance.
I refer to above approach, but failed to achieve. Can you please re-Detailed
Thanks!dj is right. Any Folder can be a picture folder.
Create a root level folder and add it to your Pictures Library in Windows. It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like. You can even specify one to be the default save location for pictures in this dialog.
Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
Message was edited by: Rikk Flohr forgot the instructions... -
"PERNR" is not defined for the current logical database.
Hi Experts,
I have developed a program for HR salary variance but when i execute i getting error in the line " get PERNR"
the "PERNR" is not defined for the current logical database. so plz suggest me to avoid this issue.
Thanks,
Rajeshthe codes are has below,
*& Report ZHRSAL_COMP
REPORT ZHRSAL_COMP.
tables: pernr,
t512t. "Wage type texts
infotypes: 0001. "Organizational Assignment
*Tables data containing directory to PCL2 payroll results file.
data: begin of rgdir occurs 100.
include structure pc261.
data: end of rgdir.
data: result type pay99_result.
data: rt_header type line of hrpay99_rt.
data: country like t001p-molga,
number like pc261-seqnr. "Number of last payroll result
types :begin of struc_p0001,
pernr type p0001-pernr,
ename type p0001-ename,
werks type p0001-werks,
btrtl type p0001-btrtl,
end of struc_p0001.
data : gtab_p0001 type table of struc_p0001,
gwa_p0001 type struc_p0001.
types : begin of struc_payroll,
text(10) type c,
date type dats,
month(2) type c,
year(4) type c,
abkrs(2) type c,
end of struc_payroll.
data : gtab_payroll type table of struc_payroll,
gwa_payroll type struc_payroll.
types : begin of struc_result,
lgart type lgart,
lgtxt type t512t-lgtxt,
betrg type betrg,
end of struc_result.
data : gtab_result type table of struc_result,
gwa_result type struc_result.
get pernr.
rp_provide_from_last p0001 space pn-begda pn-endda.
call function 'CU_READ_RGDIR'
exporting
pernr = p0001-pernr
importing
molga = country
tables
in_rgdir = rgdir
exceptions
no_record_found = 1
others = 2.
if sy-subrc = 1.
write: / 'No records found for '(001), pernr-pernr.
endif.
call function 'CD_READ_LAST'
exporting
begin_date = pn-begda
end_date = SY-DATUM
importing
out_seqnr = number
tables
rgdir = rgdir
exceptions
no_record_found = 1
others = 2.
if sy-subrc = 1.
write: / 'No payroll result found for'(002), pn-paper.
else.
call function 'PYXX_READ_PAYROLL_RESULT'
exporting
clusterid = 'RX'
employeenumber = p0001-pernr
sequencenumber = number
READ_ONLY_BUFFER = ' '
READ_ONLY_INTERNATIONAL = ' '
CHECK_READ_AUTHORITY = 'X'
IMPORTING
VERSION_NUMBER_PAYVN =
VERSION_NUMBER_PCL2 =
changing
payroll_result = result
exceptions
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
others = 8.
if sy-subrc = 0.
perform print_rx.
else.
write: / 'Result could not be read (003)'.
endif.
endif.
FORM PRINT_RX *
Print Payroll Result *
form print_rx.
format intensified on.
write: / p0001-pernr,
p0001-ename(15),
p0001-werks,
p0001-btrtl.
format intensified off.
skip 1.
move p0001-pernr to gwa_p0001-pernr.
move p0001-ename(15) to gwa_p0001-ename.
move p0001-werks to gwa_p0001-werks.
move p0001-btrtl to gwa_p0001-btrtl.
append gwa_p0001 to gtab_p0001.
write: / 'For period/payroll area: '(004),
30 result-inter-versc-fpper+4(2),
result-inter-versc-fpper+0(4),
result-inter-versc-abkrs,
/ 'In-period/payroll area: '(005),
30 result-inter-versc-inper+4(2),
result-inter-versc-inper+0(4),
result-inter-versc-iabkrs.
skip 1.
gwa_payroll-text = 'For'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-fpper+4(2) to gwa_payroll-month.
move result-inter-versc-fpper+0(4) to gwa_payroll-year.
move result-inter-versc-abkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
gwa_payroll-text = 'In'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-inper+4(2) to gwa_payroll-month.
move result-inter-versc-inper+0(4) to gwa_payroll-year.
move result-inter-versc-iabkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
write: 'Results table: '(006).
skip 1.
loop at result-inter-rt into rt_header.
perform re512t using result-inter-versc-molga
rt_header-lgart.
write: / rt_header-lgart,
t512t-lgtxt,
rt_header-betrg currency rt_header-amt_curr.
move rt_header-lgart to gwa_result-lgart.
move t512t-lgtxt to gwa_result-lgtxt.
move rt_header-betrg to gwa_result-betrg.
append gwa_result to gtab_result.
endloop.
endform. "print_rx
FORM RE512T *
Read Wage Type Texts
form re512t using value(country_grouping)
value(wtype).
check t512t-sprsl ne sy-langu
or t512t-molga ne country_grouping
or t512t-lgart ne wtype.
select single * from t512t
where sprsl eq sy-langu
and molga eq country_grouping
and lgart eq wtype.
if sy-subrc ne 0.
clear t512t.
endif.
endform. "re512t -
Listing logical database for a given application component
hi
which function module will return the logical database for a given application component from the SAP hierarchy.
Example:
Input- application component- LO
output- MSM, etc.,
Thank you.
your time and answers will be compensated with points.Why dont you use two selects to get the required information#
TAble <b>APADEVC</b>
Here you will get the link from Application Component to Package
Application Class - Packet
Package - Devclass
Then if you go into Table <b>TADIR</b>
and give the following input
PGMID = R3TR
OBJECT = LDBA
DEVCLASS = package name
you will get all the Logical Databases for that Application Component.
Here obj_name will be the Name of the LDB's
Message was edited by:
Dominic Pappaly
Maybe you are looking for
-
How much future useage for CS6 for a stand-alone photographer?
I'm a semi professional small-scale photographer. It's a hobby, but I do some commercial work. It certainly isn't a living (I have other income) I've been on CS6 for some time. It does absolutely everything that I need, and in fact it's too much. I c
-
'F4IF_INT_TABLE_VALUE_REQUEST' doest not show any list for selection
hi sapiens .... i hav an issue ... i used a parameter for which F4 help was assigned using 'F4IF_INT_TABLE_VALUE_REQUEST' .... to this an internal table any return fields was given .. if v press F4 window is opening for seletion but no values in it
-
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture" any suggestions?
-
My iPad 1 32 gig 3g did not come with a "SIM card" already put in--with none given in the box. Help?
I recently purchased an apple iPad 1, 32gig, 3G from amazon. When it was shipped, it came in a large box--but in the box was an unopened iPad 1 store box [like one you would pick up in a store]. It was never opened- just sold over amazon. When I open
-
Dual External Monitor configuration
I want to connect two large external monitors to my MacBook Pro. I already own the monitors. One monitor has a dvi connector, the other has a vga connector (they both used to be connected to my "Dull" laptop computer). One configuration that I have c