No more available memory

Hello.
I have, according to "Settings> Memory" 223.4MB available, but i'm unable to do an upgrade to "Camera Lens Launcher", that requires only 18kB and it says that there is no more available memory for apps.
Is this Normal? Is there any way to "clean" space?
Help please

montana_uk wrote:
Got many WebOS Games installed?
I put a few on yesterday and they gobbled up my RootFS space. Then had to clear all bar 2 of them just to make room to install small updates like you.
there are 2 ways to fix the preenv games taking too much space :
1-you can install the .ipk in MyDocs, its easy with the webos games manager, but really hard if you want to install games not supported by the webos games manager .
2-you can get a bigger memory for installing apps, its a custom emmc with differetn partitions, i've been using it for 5 months now, and its awesome with 5 gbs for installing apps .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Similar Messages

Will Installing more RAM improve performance, IF laptop has "available memory" not being used?

My laptop has 2x 1GB of RAM.
Right now, and usually, The Physical Memory shown in Task Manager, shows that there is "available memory" (currently it's 500megs worth). (And "system cache" says 300megs.)
There is also, right now, 2.5GB of page filing being used.
If I were to replace the 2GB of RAM with 4GB (of the same Mhz), would there be a noticable increase in performance?
(windows XP 32bit OS)

A matched set of DDR2 ram will perform a lot faster one memory not matched. Its required for the double data rate to work. Hence 2+2 is the max you'd need/want in a 32bit machine. Windows 7 was built for large memory footprints. XP was built to run just barely in 64MB but really needed a min of 128MB to support a network connection and printing. It was never enable to truely go a whole lot further than a few machines built capable of 1GB. There was even a bug which was patch causing problems if a !GB or more was available. Just because it can see it does not mean it actually uses it !! The kernal by default is swapped in/out of ram even in larger memory systems. Why, it was is not aware of the extra memory and does not change its behavour from a 512MB machine.
As for the 1333Mhz ram the timing may be faster than the other memory used. Hence it flow the data faster on the bus. Fewer delays in various cycles including the RAS/CAS etc but thats all under the hood so to speak.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

HT201364 i can't download os x mavericks it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

You want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson

PCI 5112 and fetch more than available memory

Would anyone confirm that pci 5112 can run fetch more than available memory vi with a large number of records(more than onboard memory)? Mine appears not able. thanks.

see attached screen shot. the error message is different from that in the cited article.
Attachments:
niscope_error.jpg ‏86 KB

MacPro with10.7.3. running a Python script in terminal I see a : "There is no more application memory available on your startup disk". Python uses 10G of 16G RAM and VM =238G with 1TB free. Log: macx-swapon FAILED - 12. It only happens with larger inputs

On my MacPro with10.7.3. while running a Python script in terminal, after a while, in several hours actually, I see a system message for the Terminal app: "There is no more application memory available on your startup disk". Both RAM and VM appear to be fine at this point, i.e. Python uses only 10G of 16G RAM and VM =238G with ~1TB free. Log reads: " macx-swapon FAILED - 12" multiple times. Furthermore, other terminal windows can be opened and commands run there. It only happens with larger inputs (text files), but with inputs that are about half the size everything runs smoothly. So the issue must be the memory indeed, but where to look for the problem/fix?

http://liulab.dfci.harvard.edu/MACS/README.html
Have you tried with the --diag flag for diagnostics? Or changing verbose to 3 to show debug messages? Clearly one of three things is happening;
1. You ARE running out of disk space, but once it errors out the space is reclaimed if the output file is deleted on error. When it fails, does your output have the content generated up to the point of termination?
2. The application (Terminal) is allocated memory that you are exceeding
3. The task within Terminal is allocated memory that you are exceeding
I don't know anything about what this does but is there a way to maybe run a smaller test run of it? Something that takes 10 minutes? Just to see if it works.

I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first? EtreCheck report pasted below

Hello,
My MacBook is running super slow. I downloaded Memory Clean from the App Store and I regularly have 15MB or free memory available.
In Activity Monitor I usually see the following:
~800 MB kernel_task
~500 MB softwareupdated
~500 MB Image Capture Extension
In Console, I see mdworker.bundle errors attributed to UID's: 501, 503, 1422
My current UID from what I can tell is 502. Other UID's left over from various upgrades are 89, 99, 235.
Lastly, Drive Genius is giving me a Drive Integrity Warning. But I can't create a bootable clone.
I have no idea if the above problems are related. I'd like to think I just run a lot of stuff that eats my memory and upgrading the RAM would be the easy path. What say you all?
-Jeff
Problem description:
I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first?
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 1:42:38 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (17-inch, Late 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,3
 1 2.5 GHz Intel Core i7 CPU: 4-core
 8 GB RAM Upgradeable
 BANK 0/DIMM0
 4 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 4 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 412
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1920 x 1200
 AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
 OS X 10.10.2 (14C109) - Time since boot: 11 days 16:29:20
Disk Information: ℹ️
 APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 748.93 GB (73.11 GB free)
 Encrypted AES-XTS Unlocked
 Core Storage: disk0s2 749.30 GB Online
 MATSHITADVD-R UJ-8A8
USB Information: ℹ️
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /Applications/Boom.app
 [not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
 /Applications/DiskWarrior.app
 [not loaded] com.alsoft.Preview (4.4) [Click for support]
 /Applications/Parallels Desktop.app
 [not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
 /Applications/VMware Fusion.app
 [not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
 [not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
 [not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
 [not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
 [not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
 HP IO: Path: /Library/StartupItems/HP IO
 Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
 [killed] com.apple.CallHistoryPluginHelper.plist
 [killed] com.apple.Maps.pushdaemon.plist
 [killed] com.apple.telephonyutilities.callservicesd.plist
 [killed] com.apple.xpc.loginitemregisterd.plist
 4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
 [killed] com.apple.ctkd.plist
 [killed] com.apple.emond.aslmanager.plist
 [killed] com.apple.GSSCred.plist
 [killed] com.apple.ifdreader.plist
 [failed] com.apple.loginwindow.LFVTracer.plist
 [killed] com.apple.nesessionmanager.plist
 [killed] com.apple.periodic-monthly.plist
 [killed] com.apple.periodic-weekly.plist
 [killed] com.apple.xpc.smd.plist
 8 processes killed due to memory pressure
Launch Agents: ℹ️
 [running] com.bjango.istatmenusagent.plist [Click for support]
 [running] com.bjango.istatmenusnotifications.plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
 [unknown] ~ [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [running] com.backblaze.bzserv.plist [Click for support]
 [running] com.bjango.istatmenusdaemon.plist [Click for support]
 [loaded] com.google.keystone.daemon.plist [Click for support]
 [loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
 [loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.akamai.client.plist [Click for support]
 [running] com.akamai.single-user-client.plist [Click for support]
 [running] com.backblaze.bzbmenu.plist [Click for support]
 [loaded] com.divx.agent.postinstall.plist [Click for support]
 [running] com.ecamm.printopia.plist [Click for support]
 [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
 [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
 [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
 [running] com.prosofteng.DGMonitor.plist [Click for support]
 [running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
 Dropbox Application Hidden (/Applications/Dropbox.app)
 Fantastical Application Hidden (/Applications/Fantastical.app)
 TextExpander Application Hidden (/Applications/TextExpander.app)
 HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
 o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
 Google Earth Web Plug-in: Version: 6.1 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
 OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
 npP3Remote: Version: 0.3 [Click for support]
 AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
 DivXBrowserPlugin: Version: 2.2 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 iPhotoPhotocast: Version: 7.0
 googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
 AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
 BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
 CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
 WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
 1Password
 FastestTube
 DivX Plus Web Player HTML5 <video>
 Open in Internet Explorer
3rd Party Preference Panes: ℹ️
 Akamai NetSession Preferences [Click for support]
 Backblaze Backup [Click for support]
 BrowserPlus [Click for support]
 Flash Player [Click for support]
 Flip4Mac WMV [Click for support]
 Hazel [Click for support]
 Logitech Control Center [Click for support]
 MacFUSE [Click for support]
 Printopia [Click for support]
 Xmarks for Safari [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Mobile backups: ON
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 748.93 GB Disk used: 675.81 GB
 Destinations:
 Time Machine [Local]
 Total size: 999.85 GB
 Total number of backups: 49
 Oldest backup: 2014-10-30 20:23:53 +0000
 Last backup: 2015-02-26 13:07:38 +0000
 Size of backup disk: Too small
 Backup size 999.85 GB < (Disk used 675.81 GB X 3)
Top Processes by CPU: ℹ️
 12% WindowServer
 7% bzfilelist
 1% loginwindow
 1% Dropbox
 0% bztransmit
Top Processes by Memory: ℹ️
 361 MB bztransmit
 326 MB Finder
 206 MB Safari
 163 MB WindowServer
 146 MB Console
Virtual Memory Information: ℹ️
 647 MB Free RAM
 2.99 GB Active RAM
 2.45 GB Inactive RAM
 1.67 GB Wired RAM
 10.17 TB Page-ins
 6.32 GB Page-outs
Diagnostics Information: ℹ️
 Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash

Ok.
I think that got it all. Anything else you see?
Problem description:
Uninstalled CleanMyMac2
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 3:31:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (17-inch, Late 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,3
 1 2.5 GHz Intel Core i7 CPU: 4-core
 8 GB RAM Upgradeable
 BANK 0/DIMM0
 4 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 4 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 412
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1920 x 1200
 AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
 OS X 10.10.2 (14C109) - Time since boot: 0:51:42
Disk Information: ℹ️
 APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 748.93 GB (76.14 GB free)
 Encrypted AES-XTS Unlocked
 Core Storage: disk0s2 749.30 GB Online
 MATSHITADVD-R UJ-8A8
USB Information: ℹ️
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /Applications/Boom.app
 [not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
 /Applications/DiskWarrior.app
 [not loaded] com.alsoft.Preview (4.4) [Click for support]
 /Applications/Parallels Desktop.app
 [not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
 [not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
 /Applications/VMware Fusion.app
 [not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
 [not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
 [not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
 [not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
 [not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
 HP IO: Path: /Library/StartupItems/HP IO
 Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
 [running] com.bjango.istatmenusagent.plist [Click for support]
 [running] com.bjango.istatmenusnotifications.plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
 [unknown] ~ [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [running] com.backblaze.bzserv.plist [Click for support]
 [running] com.bjango.istatmenusdaemon.plist [Click for support]
 [loaded] com.google.keystone.daemon.plist [Click for support]
 [loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.akamai.client.plist [Click for support]
 [running] com.akamai.single-user-client.plist [Click for support]
 [running] com.backblaze.bzbmenu.plist [Click for support]
 [loaded] com.divx.agent.postinstall.plist [Click for support]
 [running] com.ecamm.printopia.plist [Click for support]
 [running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
 Dropbox Application Hidden (/Applications/Dropbox.app)
 Fantastical Application Hidden (/Applications/Fantastical.app)
 TextExpander Application Hidden (/Applications/TextExpander.app)
 HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
 o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
 Google Earth Web Plug-in: Version: 6.1 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
 OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
 npP3Remote: Version: 0.3 [Click for support]
 AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
 DivXBrowserPlugin: Version: 2.2 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 iPhotoPhotocast: Version: 7.0
 googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
 AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
 BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
 CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
 WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
 1Password
 FastestTube
 DivX Plus Web Player HTML5 <video>
 Open in Internet Explorer
3rd Party Preference Panes: ℹ️
 Akamai NetSession Preferences [Click for support]
 Backblaze Backup [Click for support]
 BrowserPlus [Click for support]
 Flash Player [Click for support]
 Flip4Mac WMV [Click for support]
 Hazel [Click for support]
 Logitech Control Center [Click for support]
 MacFUSE [Click for support]
 Printopia [Click for support]
 Xmarks for Safari [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Mobile backups: ON
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 748.93 GB Disk used: 672.78 GB
 Destinations:
 Time Machine [Local]
 Total size: 999.85 GB
 Total number of backups: 49
 Oldest backup: 2014-10-30 20:23:53 +0000
 Last backup: 2015-02-26 13:07:38 +0000
 Size of backup disk: Too small
 Backup size 999.85 GB < (Disk used 672.78 GB X 3)
Top Processes by CPU: ℹ️
 32% Finder
 25% Console
 14% WindowServer
 4% NotificationCenter
 3% hazelworker
Top Processes by Memory: ℹ️
 395 MB bztransmit
 186 MB Finder
 146 MB Console
 146 MB WindowServer
 129 MB mds_stores
Virtual Memory Information: ℹ️
 1.51 GB Free RAM
 4.26 GB Active RAM
 1.38 GB Inactive RAM
 1.44 GB Wired RAM
 21.08 GB Page-ins
 3 MB Page-outs
Diagnostics Information: ℹ️
 Feb 27, 2015, 02:36:10 PM Self test - passed
 Feb 27, 2015, 02:13:40 PM /Library/Logs/DiagnosticReports/Memory Clean_2015-02-27-141340_[redacted].cpu_resource.diag [Click for details]
 Feb 27, 2015, 01:49:15 PM /Library/Logs/DiagnosticReports/WindowServer_2015-02-27-134915_[redacted].cpu_r esource.diag [Click for details]
 Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

ILife & iWork '08 Install caused dramatic loss of available memory...

I just installed both iLife & iWork '08 on my MacBook Pro laptop. It had approx. 24GB of available memory. After the installation I now have 2.51 GB of memory. I'm also now seeing "Your startup disk is full" error messages. What gives?

Hi Don Wise;
You have overfilled your disk. With the free disk space as low as you now have you are leaving yourself open to poor performance and file corruption. I would start looking at moving files off of the disk to free up space.
You can download WhatSize to help you find out where the disk space is being used.
When you get some more free disk space you should boot from the install media and repair your disk. If you don't do that you will be leaving yourself open to strange problems in the future due to file corruption.
Allan

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?

Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation

I need to clean up so i can have some more virtual memory get rid of old things i do not need like music etc.

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/782884]''
helpe delete things from my virtual memory so i can have more

Virtual memory has nothing to do with having files saved on your hard drive, unless you also get an error about disk space.
You can check the Virtual Memory settings here: Control Panel > System > Advanced > Performance > Settings (Advanced tab) 
Windows can manage more memory then is physical available and that memory is stored in a page file on your hard drive. 
If the size of that file is not large enough and all available memory is in use then you get the Virtual Memory is low warning. 
Make sure that you have at least 1 GB or the recommended setting for the Virtual Memory. 
If you have less than 1 GB physical memory installed on your computer then if possible add more memory. 
* http://support.microsoft.com/kb/555223 - RAM, Virtual Memory, Pagefile and all that stuff

Available memory decreases over time

Hello,
I noticed that under ICS, the available memory decreases over time. After about 10-15 days of use without reboot, the available memory goes from approx 150Mb to 70Mb. It is not my applications that are taking the RAM but it rather seems that it is the OS itself that is using it.
Under the Settings>apps>running> the first portion of the memory (OS I presume) keeps taking more space. Then after 10-15 days, the phone slows down and becomes jerky. After a reboot, everything goes back to normal.
I can't remember if it was the same under GB. Anyone experiencing this?

Thanks for you replies guys. This isn't so great to have to reboot every so often. There must be a memory leak somewhere.
Invar, even if I close an app, there is still a bunch of memory that's taken by the OS that doesn't get released. It's ok that apps take RAM so that they load faster when I need them, but when the OS takes up all the RAM, then the apps have little RAM to play with and it becomes laggy.
I definitely won't be rebooting every day. I like my phone to just work and forget about it. In my case, I can probably wait about 10 days until it starts becoming laggy again.
Yea, I do miss phones of yesterday where they just worked (I'm thinking dumb phones, BB). Android is cool, we just need the bugs to be fixed. I hope 4.0.4 fixes that.

IPad available memory NOT consistent with available memory shown in iTunes and available memory reduced after a connected sync...doesn't make sense.

I was looking through my pictures on iPhoto on my iPad 2 and noticed in some of my albums there were duplicate pictures, but on iPhoto on my iMac there wasn't. I had also noticed that my 64GB iPad 2 had only a little over 14GB left for available memory. I decided to connect my iPad2 to my iMac and sync it with itunes but this time I unchecked Sync Photos. I was asked to remove photos which I agreed to. My intnet was to re-install my photos in hopes that I would no longer see the duplicate photos and quite possibly free up some memory. In short, none of that worked and instead the pictures remained on my iPad2 and my available memory jumped to 956MB. I then tried selecting a " Selected Events, Faces, Albums..." in the Photo section of iTunes but I did not select any albums or events or faces. The sync ended and I still had all of the pictures on my iPad2 with 7GB left of available memory showing on my iPad2 but now showing 12GB on my iTunes on the iMac.
I then tried to do a sync again, syncing all photos and the sync cancelled. I tried it again and it went through. This sync ended with 14GB of available memory showing on iTunes on my iMac, BUT on my iPad2 it showed 7.1GB.
None of this makes any sense. I guess I could have left it alone and viewed duplicate photos but if duplicate photos were causing available memory to be reduced, I wanted the memory to come back up for future use.
Also, I noticed that the amount of photos being synced has randomly changed on a couple of these occassions as if I had more or less photos to sync and I haven't. I'm not sure what would cause this either.
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
I hope I can get some help to this.
Thanks!

Brock_DB wrote:
Where it says "Other" in the memory bar in ITunes on my iMac is 26.34 GB. Before I did the first sync it was a little over 7GB. What would cause the "Other" to consume so much memory? and what is "Other" Why did it fluctuate so drastically when I've made no changes to my iPad?
"Other" can be the cause of this storage capacity snafu that you have going on with your iPad. "Other" is pretty much what it sounds like it should be with regard to what is stored on your iPad. It is "stuff" associated with apps but not the apps themselves or any other media. It consists of Safari Bookmarks and history, Notes, text messages, email messages, contacts, photos associated with contacts and items of that nature. It should not be anywhere near 26 GB and the fact that you have much is a little bit of a problem.
Sometimes the only way to rid your device of that bloated "other" is by restoring as a new device without using the backup. There could be something corrupt on your iPad and if you restore from a corrupted backup, you will just end up back where you started. Also, sometimes this issue is caused by syncing photos and while I don't know this for a fact, it might have something to do with the metadata associated with the photos that gets corrupted and then that might cause this "other" storage problem.
Take a look at some of these and see if something in one of them helps.
https://www.google.com/search?q=What%20is%20%22Other%22%20on%20my%20iPad%20and%2 0how%20do%20I%20get%20rid%20of%20it?#q=What%20is%20%22Other%22%20on%20my%20iPad% 20and%20how%20do%20I%20get%20rid%20of%20it%3F

No more available memory

Similar Messages

Maybe you are looking for