No More Channel Line Up Changes?

Comming soon still comming? I have looked at all the printable channel line ups, and nothing has changed since November. Nationwide. Anyone hear of when soon will be, or of any additional adds?

I think you'll see it snow on the sun before you see those TV channels activated. I really do like FIOS and prefer it over my previous provider (who I will not name {please keep it relevant} ) but Verizon does a very very POOR job communicating changes and addtions to its channel line-up. I am really shocked by how poor the communication is, I had to call them to find about about the Extreme HD package. I received absolutely NOTHING in the mail or via email about it. If I hadn't called to ask about all the new channels (they said the TV ones were still coming, and this was November!!) I still wouldn't know.
Message Edited by KaLin on 01-27-2009 04:09 PM

Similar Messages

MRP create more Schedule Lines than target quantity

We already follow the OSS note 83343, we create a Schedule agreeement and validity date is the same as the Source List and Quota arrangement, also the Target Quanity is the same in the quota arrangement in the maximun quantity and Maximun release qty fields.
After maintaining that data, we run the MRP as follow:
Processing key          NETCH               Net change for total horizon
Create purchase req.    2                   Purchase requisitions in opening period
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           1                   Adapt planning data (normal mode)
Scheduling              1                   Basic dates will be determined for plann
After that, still in teh schedule agreement was created more schedule lines that the quantoty is bigger that the target quantity in the sched Agreement.
What else we miss??

Thanks for your not help.
That I can investigate is the quota arrenagement is incorrect but for some reason the QA is not working.

How do I add more channels to my input source?

I'm trying to record my son's band on a iBook in the rehearsal studio, and would like to also do this type of recording on my iMac here at home, so how do I add more channels to my input source for simultaneous multi-track recording. Right now I am only getting 2 mono and 1 stereo channels.
Ultimately I would like to add the maximum amount (probably 8 tracks), and still be able to record simultaneously with at least one guitar, one bass, one vocal mike, and the drums on one mike...
According to Hangtimes/Garage Door website, this is a possibility, but first I must create more channels.
Please help. THANKS...

shidoobie wrote:
My input source is a Tascam US-144 USB Interface that has 2 mic in's, and 2 line in's for guitar/bass.
I would like to separately record each input on different channels simultaneously.
You might also want to check out the M-Audio NRV10, which is a hybrid analog mixer + firewire audio interface (with I think around 10 simultaneously available separate channels), which makes it very "band friendly" for both rehearsal and recording.

After Quantum upgrade client box channels won't change & press C to change modes message?

I press the remote and it just stays on the same channel. The only fix is a reboot. The issue comes back after a time even after reboots. Also what is the message on the info banner after you change channels that says press c to change modes?
Who tested this latetes mess of an update???

This is also a problem for me.
This is how I describe it:
This happens pretty regularly on one of my non-DVR digital set top boxes.
After it is rebooted I can use the guide to change channels. I can browse channel line up and use the SELECT button on my remote to change the channel.
HOWEVER, many times the guide "gets stuck" and I can no longer view the guide and use the select button on the remote to change the channel.
The behavior is that no matter what channel you are watching (for example MSNBC), when you use the guide in the Favorites View mode, and you select a different channel from the guide, the channel changes to the first channel in your favorites list.
There is no easy fix. I reboot the router and it doesn't necessarily fix the problem.
Sometimes rebooting the router and the set top box at the same time fixes the problem, but usually not.
This makes the guide totally useless.

Wmgm channel 40 is must carry in south jersey but not on channel line up

helo can some please answer this have spoken with general manager wmgm he says fiber all in place
and they are on must carry list down here spoken with fcc they say same as channel 40 but they are not on
line up

bobbo527 wrote:
Unfortunately it looks like the woefully outdated November 2008 Channel Line-up PDF's are back.
Oh well. I got half of what I asked for. Updates will need to wait. Perhaps when the line up increases or has major changes, the new publication will be posted? I am looking for somehing major to happen but perhaps it's just a pipe dream. Perhaps a new guide provider anouncement will be on the next one. Don't want to start rumors because don't think it will happen. But it's all good.
Old page is back that is why the PDFs are back. Looks like the filtering and line up issues are being repaired. I do believe the new format will be back with updated information.
Message Edited by prisaz on 03-03-2009 08:38 PM

Expense (PR05) - Line item change report

Hi:
We are looking for a report on the changes made in the trip line items after the trip was submitted, approved, transferred to FI (at every status).
Basically if a consultant has submitted an expense and is approved by the manager, Then if consultant is opening that trip again and making the changes in the line item (change in cost object, amount etc) or adding a new line, we need a report which tells when was the change made, what was the change etc.
With the custom program, we are able to get the trip status history but not the line item details (change).
Any suggestions.

It tells the status of the trip but doesn't tell me what change is made.
For example:
If the original trip had one line for Airfare (say 1000) which was approved and transferred.
Later on this was adjusted to Airfare (say 1010) which was again approved.
We want to know amount was changed from 1000 to 1010 on this date. Similarly to cost assignment. Any field which has accounting effect.
Basically our Accounts payable needs to know if they should settle the expenses without waiting for the receipts at month end (in the scenario where cost object is changed later but amount is same, so there is no revised receipt from consultant. They can just settle it again)
Some kind of report which tells when and what change was made (at item level).
Thanks.
Rahul

I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4?

I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.

1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

Order of Line Items change when billing

Hi all,
For some reason the order of the line items change when billing a salesorder
Salesorder line items:
10
20 text line
30
When billing it changes in:
20 text line
21
30
I'm kind of lost on how to solve this.
With kind regards,
John Waltmans

try to do with copy controls... VTLA.. sales doc to delivery doc.. goto item and there take item categioreis..
there check wethere data transfer
101
0
2
reard if it helps..
Ramki

What is the Table to Capture line item changes in PO?

Dear Guru's
what is the table in which i can find the report of ammendment in the PO at line item level OR is there any Standard SAP report ???
please help..
gaurav

Go through Following Link
Report on Purchase order header changes and Line item changes.
Vipin

How can I use srvctl command line for change "Failover type" and "F method"

Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.

user10674190 wrote:
Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
Also see
11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

Line weight changes when using Align to Pixel grid

When I select Align to Pixel Grid in the Transform Panel, I see line weight changes occur. I try to change the line weight in the either the Stroke or Appearance panel and it will not change, no layers locked, any ideas how to change the line weight?

Chouettecacahuete wrote:
... I noticed that the line increases from 0.5pt to 1pt mainly (although not always) on straight lines, anything with a bezier curve seems to remain as 0.5pt.
Just try this, with snap to pixel grid on, create 10 pixel long straight horizontal 1pt line with the pen or line tool. You won't be able to change the stroke weight to other than whole numbers. But if you rotate the line with only 0.01 degrees by typing this for rotation in the Transform panel, then you can change the stroke weight to 1.25 for example. When creating artworks for for screen display always verify the result with View > Pixel Preview turned on.
tonyharmer wrote:
...I only referred to Photoshop to illustrate the behaviour - vector tools aside, everything you do in Photoshop has to be whole pixels
As I said, Photoshop doesn't have snap to pixel grid feature like Illustrator. You can easily create fuzzy lines in Photoshop if you are not drawing them precisely in the middle of the pixels. To check what I'm talking about try this In Photoshop, create a new document with a very small pixel dimensions like 20 x 20 pixels and zoom to the maximum 3200% to see clearly the result. Fill the image with light gray color so you can see the pixels when View > Show Pixel grid is on. Then with black color try drawing a straight line with any tool that creates pixels like a hard brush or the line tool used in pixel mode, and try using constraints like holding Shift while dragging. You will see that unless you draw the lines exactly in the middle of the pixels it will be fuzzy and not clean. The only way to ensure not fuzzy lines in Photoshop is to turn off the anti-aliasing. You do this by unchecking the anti-alias for tools that have this option and instead of burshes use the pencil tool (which is brush without anti-aliasing). And Illustrator works the same too if you turn off Anti-aliased Artwork in its general section of the preferences and view the result with View > Pixel Preview, you don't need to have the Align to Pixel Grid on, the aliased result will be the same like in Photoshop.

Line size changes when using Rotate??

Hello: Level: Newbie OS: Windows 7 64bit
So, I have been using the Line tool and then Grouping two Lines and then using the Object > Transform > Rotate
The lines I draw are 0px wide and 22px high but when I Rotate them around the circle the Line sizes change ... ??
Say the two lines are Grouped and the first set is 276px the next set becomes say 276.346 and then 275.582 and 198.682 and so on ...
I have gone into the Tranform pallette to see if there is something I should be checking but it doesn't seem as though I am missing anything to the best of my (limited) knowledge.
I have also tried the manual and looked for something like: "why line size would change on rotate" and I've looked under Transform and Rotate but I haven't had any luck.
As always ... Thank you so much for your time

OMG! LMAO!! I am literally laughing my _ _ _ off!!
Sooo Sorry, did i forget to mention that I am dyslexic?? wasn't trying to be cunning ... lol
Also, and ... Pleeeeease Forgive Me for this ... I didn't take into account that you would actually check the 276.346 ... etc. in my first post ... thought I had mentioned those were just "examples" ... seems It didn't make it from my head to the keyboard to the post
I just pulled those number outta that thing I'm laughing off ... and now between the tears of laughter I am feeling Super Bad for not considering that those numbers would matter all that much ... I swear ... I'm not usually this numb!
So, I spoke to someone at Adobe today and it seems as though I am not Aligning things correctly.
I'm just getting back home again and I'm going to give the tut a go again.
I'm using CS6 .... have I also mentioned this is my first Illustrator attempt?
Below is the compass I made in two days ... it's missing the last two steps. I'm also stuck on that dang "Glossy" thing but hey, that's an other post for me to lead you all astray on
My head has been a bit in the clouds this past week ... so, I am sorry for that and certainly do Very Much Appreciate Your Amazing Vigilance w/All My Heart!!
I just cannot give up. I'm not a quitter. I believe I ought to brush up on my (p. poor) math skills as well as sitting down to read the manual front and back before an other tut attempt.
Thank you again for Everything!! I'll be back to let you know how it goes.
The inner circles and increments don't look right to me

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

NI-6023 digital inputs miss line state-changes

I am using the NI-6023 DAQ to monitor digital lines. Occasionally (less than 1% of the time) the 6023 misses a low-to-high line state-change from . LabVIEW 6.1 polls the 6023 every 5 mS. The digital lines are normally low. When they go high, they remain high for only 50 mS.
LabVIEW 6.1
Windows 2000 Professional

Hi Rchrd,
If you're using a loop to poll your digital line, it's possible that you're not actually polling every 5 ms, since this is software timed. The speed is software/computer dependent, hence can depend on factors such as processor activity. Software timed I/O is normally used for low-speed applicatiosn that do not need hardware timed precision. You can do some troubleshooting by checking to see if there's a certain condition under which the state change is missed, and making sure you don't have other applications runing.
Hope this helps.
Thanks,
Lesley Y.

Error opening vty no more tty lines error

Hello Community,
Whenever I attempt to run a Tcl script I get the following error message:
Tcl policy execute failed: cannot get pty for exec: Error opening vty no more tty lines
I inreased the number of vty lines to 10 but every I run the script it takes virtually all the lines, see below.
Can someone please help
Brislington_DM001#show line
   Tty Typ     Tx/Rx    A Modem Roty AccO AccI   Uses   Noise Overruns   Int
     0 CTY              -    -      -    -    -      0       0     0/0       -
     5 AUX   9600/9600 -    -      -    -    -      0       0     0/0       -
*    6 VTY              -    -      -    -    -    127       0     0/0       -
*    7 VTY              -    -      -    -    -     12       0     0/0       -
*    8 VTY              -    -      -    -    -      0       0     0/0       -
*    9 VTY              -    -      -    -    -     22       0     0/0       -
*   10 VTY              -    -      -    -    -      2       0     0/0       -
*   11 VTY              -    -      -    -    -      1       0     0/0       -
*   12 VTY              -    -      -    -    -      0       0     0/0       -
*   13 VTY              -    -      -    -    -      0       0     0/0       -
*   14 VTY              -    -      -    -    -      0       0     0/0       -
    15 VTY              -    -      -    -    -      0       0     0/0       -
    16 VTY              -    -      -    -    -      0       0     0/0       -
Cheers

anbv,
I have revisited your answer, and it seems like you've hit a right note:
Please take look at error output:
MX_DMVPN_HUB6          1541987: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: Tcl policy execute failed: cannot get pty for exec: Error opening vty no more tty lines
MX_DMVPN_HUB6          1541986: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     (file "system:/lib/tcl/base.tcl" line 50)
MX_DMVPN_HUB6          1541985: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:      interp share {} stderr slave..."
MX_DMVPN_HUB6          1541984: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:      interp share {} stdout slave
MX_DMVPN_HUB6          1541983: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:      interp create -safe slave
MX_DMVPN_HUB6          1541982: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: "if {$security_level == 1} {       #untrusted script
MX_DMVPN_HUB6          1541981: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     invoked from within
MX_DMVPN_HUB6          1541980: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: "eval_script slave $scriptname"
MX_DMVPN_HUB6          1541979: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     invoked from within
MX_DMVPN_HUB6          1541978: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     (procedure "eval_script" line 7)
MX_DMVPN_HUB6          1541977: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: "$slave eval $Contents"
MX_DMVPN_HUB6          1541976: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     invoked from within
MX_DMVPN_HUB6          1541975: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: "cli_open"
MX_DMVPN_HUB6          1541974: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl:     while executing
MX_DMVPN_HUB6          1541973: Jul 5 08:02:56.577: %HA_EM-6-LOG: utilisationUHub6.tcl: cannot get pty for exec: Error opening vty no more tty lines
The script opens the file a vty session, but doesn't seem to close it.
Any thoughts.
Mike
I never did say thank you for your input. I would welcome your thoughts.
Cheers
Carlton

No More Channel Line Up Changes?

Similar Messages

Maybe you are looking for