No more connections available to this remote computer...Urgent Help for File server...

Hi Guys,
I need urgent help regards to our school File server which is having "No more connection to this remote computer error"
on SMB Shares where I usually authenticate with a domain username it used to work fine since till 3 weeks ago.
Now I can browse the SMB shares with only IP... Netbios gets straight away this error message from non-domain joined pc's where the computer needs to connect to the SCCM distribution point on this file server.
Strangely, Domain joined pc's does not have this problem at all they can use Netbios or IP no problem at all. But someone from a standalone laptop or desktop who needs to access shares through netbios gets this message.
Can someone help me please?
I did check DNS yet there is no problem on DNS I checked PTR record for the server to make sure it is not turned in to multihome accidently but nothing at all.
I also did a NETMON where I captured the data from server and the client I get these errors:
205 4:54:35 PM 16/12/2013
7.3299179 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710719, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:22, IPv4:21}
206 4:54:35 PM 16/12/2013
7.3299668 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49312, PayloadLen=0, Seq=2167618331, Ack=1771710720, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:22, IPv4:21}
207 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710720, Ack=2167618332, Win=16425 (scale factor 0x2) = 65700
{TCP:22, IPv4:21}
208 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 SMB
SMB:C; Negotiate, Dialect = PC NETWORK PROGRAM 1.0, LANMAN1.0, Windows for Workgroups 3.1a, LM1.2X002, LANMAN2.1, NT LM 0.12, SMB 2.002, SMB 2.???
{SMBOverTCP:23, TCP:22, IPv4:21}
209 4:54:35 PM 16/12/2013
7.3307974 10.2.0.13
10.2.1.96 SMB2
SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:23, TCP:22, IPv4:21}
210 4:54:35 PM 16/12/2013
7.3314064 10.2.1.96
10.2.0.13 SMB2
SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
211 4:54:35 PM 16/12/2013
7.3318815 10.2.0.13
10.2.1.96 SMB2
SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:23, TCP:22, IPv4:21}
212 4:54:35 PM 16/12/2013
7.3324012 10.2.1.96
10.2.0.13 SMB2
SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
215 4:54:35 PM 16/12/2013
7.3339977 10.2.0.13
10.2.1.96 SMB2
SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
{SMBOverTCP:23, TCP:22, IPv4:21}
216 4:54:35 PM 16/12/2013
7.3341805 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A.R.., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771711788, Ack=2167619070, Win=0 (scale factor 0x2) = 0
{TCP:22, IPv4:21}
217 4:54:35 PM 16/12/2013
7.3357089 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201172, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:27, IPv4:21}
218 4:54:35 PM 16/12/2013
7.3357422 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49313, PayloadLen=0, Seq=3718656547, Ack=2943201173, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:27, IPv4:21}
219 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201173, Ack=3718656548, Win=16425 (scale factor 0x2) = 65700
{TCP:27, IPv4:21}
220 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 SMB2
SMB2:C   NEGOTIATE (0x0), GUID={8213462D-2600-D1B1-11E3-65FC4BCDE707}
{SMBOverTCP:28, TCP:27, IPv4:21}
221 4:54:35 PM 16/12/2013
7.3364173 10.2.0.13
10.2.1.96 SMB2
SMB2:R   NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:28, TCP:27, IPv4:21}
222 4:54:35 PM 16/12/2013
7.3369702 10.2.1.96
10.2.0.13 SMB2
SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
223 4:54:35 PM 16/12/2013
7.3373474 10.2.0.13
10.2.1.96 SMB2
SMB2:R  - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED  SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:28, TCP:27, IPv4:21}
224 4:54:35 PM 16/12/2013
7.3377060 10.2.1.96
10.2.0.13 SMB2
SMB2:C   SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
227 4:54:35 PM 16/12/2013
7.3390552 10.2.0.13
10.2.1.96 SMB2
SMB2:R  - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE  SESSION SETUP (0x1)  
{SMBOverTCP:28, TCP:27, IPv4:21}
Regards,
Gokhan

Solution has been found, 
After doing bit of a backtrack, site DC's were out of sync with PDC with time.
Also Time service was shutdown on PDC which has been enabled and pointed to the Australian pool ntp IP address.
Everything is back on track now.
Regards,
Gokhan Cil

Similar Messages

  • HT1665 I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    See this support article: http://support.apple.com/kb/TS3221

  • I have a file that is something I recorded on my camcorder.  I am trying to open it and it keeps saying that a required codec isn't available.  This is the name of the file. M2U00001.MPG.  What can i do to get it to play.

    I have a file that is something I recorded on my camcorder.  I am trying to open it and it keeps saying that a required codec isn't available.  This is the name of the file. M2U00001.MPG.  What can i do to get it to play.

    The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0 

  • "Expected Ship Date: Not available at this time." Please help.

    I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
    Please PM with details if possible. Thanks in advance!
    Subject was edited by: Verizon Moderator

        Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
    If not, I have sent you a DM so we may help look into this.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

    SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."  Hresult: 0x80004005
     Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
    I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
    I'm using OLE DB provider for connecting to cube.
    I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

    You are probably missing an update.
    I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
    So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
    Arthur My Blog

  • High availability for file server and exchange with 2 physical servers

    Dear Experts,
    I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
    1. Domain controller
    2. Exchange 2013
    As of now I am thinking of setting up below:
    1. Install Hyper-v on both and create 3 VM on each as
    -On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
    -On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
    I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
    Any advise will be highly appreciated..
    Thanks for the help in advance..
    Best regards,

    Dear Experts,
    I have 2 physical server with local disks only. I want to setup below on same with high availability, please advise best prossible options. We will be using windows 2012 R2 Server..
    1. Domain controller
    2. Exchange 2013
    As of now I am thinking of setting up below:
    1. Install Hyper-v on both and create 3 VM on each as
    -On Host A- 1 VM for DC, 1 VM for File server with DFS namespace and replication for file server HA and 1 VM for Exchange 2013 with CAS/MBX with DAG and DNS RR for Exchange HA
    -On Host B - 1 VM for ADC, 1 VM for File server DFS member for above and 1 VM for Exchange 2013 CAS/MBX with DAG member
    I have read on internet about new features called scale out file server (SoFS) in Windows 2012 Server but not sure that will be preferred for file sharing.
    Any advise will be highly appreciated..
    Thanks for the help in advance..
    Best regards,
    DFS is by far the best way to implement any sort of file server. Because a) failover is not fully transparent and does not happen always (say not on copy ) b) DFS cannot replicate open files so if you edit a big file and have node rebooted you're going to
    lose ALL transactions/updates you've applied c) actually slows down the config. See:
    DFS for failover
    http://help.globalscape.com/help/wafs3/using_microsoft_dfs_for_failover.htm
    DFS FAQ
    http://technet.microsoft.com/library/cc773238(WS.10).aspx
    (check "open files" point here)
    DFS Performance
    http://blogs.technet.com/b/filecab/archive/2009/08/22/windows-server-dfs-namespaces-performance-and-scalability.aspx
    SoFS a) requires shared storage to run and you don't have one b) does not support generic workloads
    (only Hyper-V and SQL Server) and c) technically makes sense to expand SAS JBOD or existing FC SAN to numerous Hyper-V clients over 10 GbE w/o need to invest money into SAS switches and HBAs and FC HBAs and new licenses FC ports. Making long story short:
    SoFS is NOT YOUR CASE. 
    SoFS Overview
    http://technet.microsoft.com/en-us/library/hh831349.aspx
    http://www.aidanfinn.com/?p=12786
    http://www.aidanfinn.com/?p=12786
    For now you need to find some shared storage to be a back end for your hypevisor config (SAS JBOD from supported list, virtual SAN from multiple vendors like for example StarWind see below, make sure you review ALL the vendors) and then you create a failover
    SMB 3.0 share for your file server workload. See:
    Clustered Storage Spaces over SAS JBOD
    http://technet.microsoft.com/en-us/library/jj822937.aspx
    Virtual SAN from inexpensive SATA and no SAS or FC
    http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
    Failover
    SMB File Server in Windows Server 2012 R2
    http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
    Fault
    tolerant file server on just a pair of nodes
    http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
    For Exchange you use SMB share from above for a file share witness and use DAG. See:
    Exchange DAG
    Good luck! Hope this helped :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • What am I doing wrong that I can't connect to a very remote computer?

    Maybe I just don't understand the definition of "remote" but I can connect to computers on my local Ethernet network, but when I attempt to connect to my dad's computer a thousand miles away, I get a "disconnected" or "offline" comment. He has Safari and Mail active, and we are looking at each other through iChat, so I KNOW he's online.
    He's 84 years old, and the communication is killing me, but I've had him turn on all the permissions in Sharing, so I can't figure out why I can't get on his machine. He's got a new iMac/Intel box, and I'm running a G5; we're both running 10.4.7.
    When I "edit" his information, very often the address turns from the number I've entered to "0.0.0.0." and I can't change it. Our IP numbers are only different by 50 in the last set, which seems odd to me, but I'm ignorant!
    According to the Sharing panel, the IP address is supposed to begin with "afp://" but that gets stripped out when I enter it - in fact, sometimes (but not always) it won't let me enter the slash marks.
    I'd appreciate any info you guys can give me.
    Thanks!

    what's this about 'consumer hubs'?
    i've tried almost every trick i've read, short of doing a complete dump and re-install of all software. i just can't get connected to someone over the internet. could it be their service provider doing the blocking?
    as i've only tried connecting to one other person's computer in one area of the globe it's difficult to say what the problem is.
    here's a thought for apple - have a dummy site (for us dummies) that we can access using ard, thusly allowing us to test our own settings to make sure the problem doesn't reside with us.
    any help would be great.

  • Connection doesnt work from remote computer

    Hi
    I have Oracle XE installed on a computer and my application (Excel application, VBA code) is working well with oracle xe.
    i want to run the application from a remote computer.
    I opened my application on a rempote computer and it could not connect to oracle xe..
    I installed the Oracle XE client on the remote computer but still the application cant connect to the oracle server from the remote computer.
    this is my connection string:
    sCon = "Provider=MSDAORA;Data Source=xe;User Id=myUser;Password=myPw;"
    the computer on which oracle xe express is located is called "Hagar1".
    how can i connect to the oracle from the remote application?
    thanks,
    Hagar
    Edited by: user641508 on 04-Dec-2008 10:26
    Edited by: user641508 on 04-Dec-2008 10:27

    the remote client doesn't know how to get to hagar1, simplest fix is add the entry to the tnsnames.ora file, run a tnsping hagar1 to find the location of the client oracle_home/network/admin/tnsnames.ora file and add:
    hagar1 =
       (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = xe_hostIP_or_name )(PORT = 1521))
        (CONNECT_DATA =
          (SID = XE)
      )Edited by: clcarter on Dec 6, 2008 10:53 AM add code tag

  • Cannot connect to DB from remote computer (ORA-12545)

    Hello all,
    Please help, I am stumped.  I am trying to connect to a database located at my work from at home.
    I am running into the following issue (see command and error below):
    ansichart@ansivm:~/src/perl$ sqlplus aspxdba/********@aspxp2
    SQL*Plus: Release 11.2.0.3.0 Production on Thu Jul 18 21:15:09 2013
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Here is my tnsnames.ora file (I have the service_name censored out for privacy reasons):
    ansichart@ansivm:~/src/perl$ cat $ORACLE_HOME/network/admin/tnsnames.ora
    aspxp2 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orarac9-scan)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = *****************)(UR=A)
    I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
    ansichart@ansivm:~/src/perl$ nmap -sT -p 1521 orarac9-scan
    Starting Nmap 5.21 ( http://nmap.org ) at 2013-07-18 20:53 CDT
    Nmap scan report for orarac9-scan (10.1.13.115)
    Host is up (0.0088s latency).
    PORT     STATE SERVICE
    1521/tcp open  oracle
    Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds
    ansichart@ansivm:~/src/perl$
    I have another terminal opened up to a server at work and I can connect to the DB with sqlplus just fine.  I verified that the record for this database on the tnsnames.ora file is the same as it is at work.
    In conclusion, I can connect to the Database at work, but I cannot at home, even though I am using the same connection information and verified that port 1521 is accessible on this Database server from at home.  So why can't I establish a DB connection?
    Any ideas?
    Thanks,
    Ben

    676d3153-d812-4300-9e6a-b1dc87a2ebfe wrote:
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    This simply means "hostname unknown". In other words, the hostname used for the connection could not be resolved to an IP address.
    I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
    You are verifying hostname orarac9-scan only. You are not verifying that the hostname supplied by the Oracle SCAN Listener can be resolved by your platform.
    As you are connecting to a SCAN listener, it will do its magic (load balancing/round robin/whatever) and return a redirect to your client driver - telling it where to find the service name the client requested.
    So your client driver gets a hostname and port in return. It then attempts to connect to that to establish your Oracle client-server session. If the RAC has been setup with the typical RAC hostnames, your client will get hostnames like orarac9-vip1 and orarac9-vip2 returned. Likely as FQDN too.
    This means your platform needs to be able to resolve these hostnames. It does not. Thus the error.
    In your platform's /etc/hosts file, define the complete list of RAC hostnames (SCAN, Public and VIP hostnames).

  • Connection to Oracle from remote computer in local network

    I have local network with two computers: WinXP with Oracle 10g and Vista with Oracle Client tools. I need to connect to the Oracle 10g from the client PC with sqlplus and with Enterprise Manager Console. Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error.
    Is the problem in configuration of listener.ora, tnsnames.ora and sqlnet.ora on the server side and on the client side? They look like this:
    Server side:
    # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    # sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # listener.ora Network Configuration File:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    Client side:
    # tnsnames.ora Network Configuration File:
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    # sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0
    SQLNET.AUTHENTICATION_SERVICES= (NTS, EZCONNECT)
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    Are these files configured fine? Or do I have to configure also something else? When I do tnsping 10.0.0.9 from the client, the result is OK. So what is wrong? Thanks a lot for help, Petr.

    Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
    - Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
    - Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
    - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
    HTH

  • My apple ipod touch's screen randomly went dark. now it won't charge, turn on, or connect to itunes on my computer. HELP!!

    i have no idea what to do. my apple ipod touch's screen randomly went dark. now it won't charge, turn on, or connect to itunes. PLEASE HELP!!

    See Here...
    Frozen or unresponsive iPod touch
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • [b]Connection to Oracle DB per JDBC URGENT HELP NEEDED PLEASE![/b]

    Hallo,
    I'm a newbie. I want to make a connection to the oracle db on the server and I have been having serious problems. See CODE and ERROR MESSAGEs below:
    import java.sql.*;
    public class SqlConnection01 {
         public static void main(String[] args) {
              Connection con = null;
              Statement stmt = null;
              try {
                   Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
    con = DriverManager.getConnection
         ("jdbc:oracle:thin:@38.218.2.227:1521:testdb","data","test"); //making the connection.
                   stmt = con.createStatement ();// Sending a query to the database
                   ResultSet rs = stmt.executeQuery("SELECT mand,kost,ktest,kok FROM test");
                        while (rs.next()) {
                             String mandt = rs.getString("1");
                             String kostl = rs.getString("2");
                             String ktest = rs.getString("3");
                             String kokrs = rs.getString("4");
                             System.out.println( mandt + kostl ktest kokrs );
              } catch(Exception e) {
                   e.printStackTrace();
              } finally {
                   try
                        if(stmt != null) stmt.close();
                        if(con != null) con.close();
                   } catch (Exception exception) {
                        exception.printStackTrace();
    ERROR MESSAGE:
    java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153092352)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
         at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3695)
         at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:352)
         at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:362)
         at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:536)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:328)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at java.sql.DriverManager.getConnection(Unknown Source)
         at SqlConnection01.main(SqlConnection01.java:24)
    What am I doing wrong here. I am using Oracle9i client installed on my pc (Release 2 (9.2.0.1.0) for Windows ) so I downloaded the ojdbc14 drivers for this version and I copied them in my bin directory C:\j2sdk1.4.2_06\bin\ojdbc14 .
    Secondly I can connect to the db per command line( sqlplus /nolog; conn data/test@testdb) and querry the testdb.
    I can also test the connection using oracle Net Manager and the test is successful.
    But I can't start up the lsnrctl on my pc.I get this message any time i issue the command(C:\>lsnrctl
    'lsnrctl' is not recognized as an internal or external command, operable program or batch file.)
    What am I doing wrong here? What should I do to have this connection possible. Thanks very much in advance.

    oh sure! Below is the TNSNAMES I copied from my PCfound in(C:\oracle\ora92\network\admin\SAMPLE) The next thing could be how could I get access to the TNSNAMES on the server?
    STARTS HERE:
    <alias>= [ (DESCRIPTION_LIST =  # Optional depending on whether u have
                        # one or more descriptions
                        # If there is just one description, unnecessary ]
         (DESCRIPTION=
         [ (SDU=2048) ]     # Optional, defaults to 2048
                        # Can take values between 512 and 32K
         [ (ADDRESS_LIST=    # Optional depending on whether u have
                        # one or more addresses
                        # If there is just one address, unnecessary ]
         (ADDRESS=
              [ (COMMUNITY=<community_name>) ]
              (PROTOCOL=tcp)
              (HOST=<hostname>)
              (PORT=<portnumber (1521 is a standard port used)>)
         [ (ADDRESS=
              (PROTOCOL=ipc)
              (KEY=<ipckey (PNPKEY is a standard key used)>)     
         [ (ADDRESS=
              [ (COMMUNITY=<community_name>) ]
              (PROTOCOL=decnet)
              (NODE=<nodename>)
              (OBJECT=<objectname>)
    ... # More addresses
         [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
         [ (CONNECT_DATA=
              (SID=<oracle_sid>)
              [ (GLOBAL_NAME=<global_database_name>) ]
         [ (SOURCE_ROUTE=yes) ]
         (DESCRIPTION=
         [ (SDU=2048) ]     # Optional, defaults to 2048
                        # Can take values between 512 and 32K
         [ (ADDRESS_LIST= ]     # Optional depending on whether u have more
                        # than one address or not
                        # If there is just one address, unnecessary
         (ADDRESS
              [ (COMMUNITY=<community_name>) ]
              (PROTOCOL=tcp)
              (HOST=<hostname>)
              (PORT=<portnumber (1521 is a standard port used)>)
         [ (ADDRESS=
              (PROTOCOL=ipc)
              (KEY=<ipckey (PNPKEY is a standard key used)>)
         ...           # More addresses
         [ ) ]           # Optional depending on whether ADDRESS_LIST
                        # is being used
         [ (CONNECT_DATA=
              (SID=<oracle_sid>)
              [ (GLOBAL_NAME=<global_database_name>) ]
         [ (SOURCE_ROUTE=yes) ]
         [ (CONNECT_DATA=
         (SID=<oracle_sid>)
         [ (GLOBAL_NAME=<global_database_name>) ]
         ... # More descriptions
         [ ) ]     # Optional depending on whether DESCRIPTION_LIST is used or not
    I think this is the example of what is in the TNSNAMES. It hasn't got the infos I need here.It just explain.

  • Programs says it's empty, my documents says it's not available, internet got wiped out, need help finding files

    It says something may have corrupted the system.  I use Microsoft Windows 2003 server.  Standard Edition.  It's XP.  I need assistance. 

    Hi KennyL925,
    Could you tell us more detail about your issue, such as what are you trying to do when you meet this error, If you are accessing the shared folder please contact the shared
    file owner or your domain administrator to give you’re the proper permission.
    More information:
    File and Folder Permissions
    http://msdn.microsoft.com/en-us/library/bb727008.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Ora-12203 error when connecting to oracle 9i on win2003 - urgent help reqd

    hi
    one of our clients who is on same N3 network and is trying to log on to our oracle 9i database which is installed on windows 2003 + srv pack 1 but is getting ora-12203 erorr.
    the ip address of the client machine has been allowed thr our firewalls and been allowed to use sqlnet on oracle port 1521
    following setting have also been done
    in registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME(0) i have set
    USED_SHARED_SOCKET=TRUE
    using Net manager, i have set connection type as DEDICATED_SERVER.
    protocol as TCP/IP and Port no =1521.
    At O/S level we have given oracle_home for 9i access (read, modify execute ..etc) to all sub-folders under e:\orant\ora9i
    i have restarted the listener service and also the windows 2003 server.
    Is there any specific setup criteria which we need to cater when users connect to windows 2003 server
    thanks
    kedar

    Hi Paul
    we have 2 external machine which have been given access thr our firewalls
    our database is in Wales and the machines are in england.
    everything is ok on the server as i have checked the settings which i could know of
    All these machines are on same N3 network , the 2 client machines have DNSlookup set which goes thr all the necessary firewalls and when the following command is run on client machine it can see the server
    c:\> nslookup < machine_name >
    the access to our database is given thr range of ip address as we dont have static IP and when the above command is run it returns dynamic IP address for the database in Wales
    H:\>nslookup krusty.hsw.wales.nhs.uk
    Server: bwd-dc1.bwd.xelpct.nhs.uk
    Address: 10.xxx.xx.xx
    Non-authoritative answer:
    Name: krusty.hsw.wales.nhs.uk
    Address: 194.xxxx.x.xx <---- ip address of databse
    Thanks
    Kedar

  • I can't get FireFTP to connect today, does anyone have any advice/help for me? On a Mac. Been using it for a year no prob.

    Every time I hit "connect", it says: unable to make a connection. Please try again.

    [discussion moved to Installing Flash Player forum]

Maybe you are looking for

  • Questions in Lync 2013 HADR

    Hi Team, One of the customer raised the query: In our scenario, we want Active/Active High availability between different geolocations with RPO=0 and RTO near zero (seconds). Questions: 1. Isn't this possible with pool pairing and database availabili

  • Create installer qt

    Hello everyone, I am a beginner to mac programming. question 1. I created an application for qt and I would like to create an installer for mac where the installer is able to create a file association with a specific filename extension. question 2. I

  • Brick walls in dvd player 4.6.1

    Hi all, I upgraded to 10.4.3 from 10.3 a week ago. I'm using dvd player 4.6.1 as well. Now when I play regular (not burned) dvd's, you know, the kind one buys in a store, I get a lot of visible (digital ?) distortion. It's like the pictures have no s

  • Free update for Indesign 1.0 to 1.5

    Hi all, I got myself the version 1.0 from Indesign. Now I heard actually that I could get the 1.5 version if I have the full program. Can some one help me out where to get it? Thanks in advace.

  • Can i use Photoshop Elements to view .DWG files (Cad)

    Does Photoshop Elements support .DWG files? Maybe with a plugin or similar. BR Jukka