No more EXPORT (Share) into File
Hi,
without wanting to critizise iPhoto 6, actually, almost everything worked out without issues in my case, I am missing out on one function which I used on iPhoto 5 a lot. The SHARE to FILE function.
I really used it a lot to convert a certain amount of pictures into a predefined format.
Example:
Earlier I marked 8 pictures in iPhoto, clicked SHARE/export to file, set dimensions to 800, and with more or less one click, I had 8 files on my desktop reduced in size to 800. Next step I marked the 8 pictures, klicked OPEN WITH / MAKE JPG QUALITY 60 (Adobe function), and I had perfect files for upload to my website.
Am I missing something or does this SHARE/EXPORT to FILE function no longer exist. Is apple tring to force us into iWeb and other? Or what could be the explanation to take out such an elementale function? I thought maybe I could do it indirectly via SHARE/EMAIL but you can not even change size with this.
Any hint is highly apreciated.
Tom
iMac G5 20 - 1,256 GB RAM Mac OS X (10.4.4)
I don't remember last version...but the export feature of iPod is limited to 3 sizes only....small, medium and big (640x480 big?!)
Similar Messages
-
Hi, I want to export BLOB data into normal files in the OS. The Database is not in my local server. I can only connect through the TNS. Would you please give me some suggestions? Thanks a lot!
declare
l_output utl_file.file_type;
l_amt number default 32000;
l_offset number default 1;
l_length number default nvl(dbms_lob.getlength(p_blob),0); -- l_length = size of blob
begin
l_output := utl_file.fopen(p_dir, p_file, 'w', 32760);
if utl_file.is_open(l_output) then
while ( l_offset < l_length ) loop
utl_file.put(l_output,
UTL_RAW.CAST_TO_VARCHAR2(dbms_lob.substr(p_blob,l_amt,l_offset)));
utl_file.fflush(l_output);
l_offset := l_offset + l_amt;
end loop;
utl_file.new_line(l_output);
utl_file.fclose(l_output);
end if;
end; -
Export georaster into file (tfw problem)
Hi,
I want to export some georaster into the file system with different resolution of the image. after storage the data in sdo_georaster i built pyramids. now i want to export the data in different pyramid-level with:
CREATE OR REPLACE PROCEDURE A
IS
GR SDO_GEORASTER;
BEGIN
SELECT GEORASTER INTO GR FROM T99_GEORASTER WHERE ID = 1;
SDO_GEOR.EXPORTTO(GR, 'PLEVEL=4', 'TIFF', 'FILE', 'e:\bla\aaa', 'WORLDFILE', 'FILE', 'e:\bla\aaa');
END;
after i export my files aaa.tif and aaa.tfw i have the right image but a wrong tfw-information. the pixel-width und pixel-height in the tfw are wrong. if i change the plevel=2 (available 1..6) to 2 the get the result as the same tfw-data as in the plevel=4-export. so the only level, the georeferencing data are correct is with pyramidlevel=0?
anybody know my error or can help me?
thanks,
michaelIf I understand you right, you want to replace any occurance of 'SEQ' in the variable mmy_col_string with another value (new column name)?
This would work like so:
declare
mmy_col_string varchar2(100) := 'SELECT ID, SEQ, NAME FROM TABLE;';
col_name_replace varchar2(30) := 'SEQ';
new_col_name varchar2(30) := 'NEW_COLUMN_NAME';
pos number := 0;
begin
pos := instr(mmy_col_string, col_name_replace);
while pos > 0 loop
mmy_col_string := substr(mmy_col_string, 1, (pos-1)) || new_col_name || substr(mmy_col_string, (pos + length(col_name_replace)));
pos := instr(mmy_col_string, col_name_replace);
end loop;
end;
/Regards,
Gerd -
What is the best way to export/share GarageBand files with a non-mac user?
I have some GB2 files, too big to email, that I want a client to hear and give direction. then I can make the changes and re-export them for him to hear again. What is the best way to do this? IMac seems to be forthcoming about sharing pictures and IMovies but not music files, for understandable reasons. Thanks.
BBHere's one way, but be sure you understand the privacy policy!
-
Exporting edited PE9 files into After Effects?
Is it possible to import edited Premiere Elements 9 files into After Effects to apply effects?
Thanks in advanceSteve,
I respectfully disagree on this point.
You can put an uncompressed AVI into Premiere Elements and output an uncompressed AVI from Premiere Elements -- but the video is compressed a DV while it's in the program so there's no way to avoid the issue of compression
If one starts with DV-AVI, there is slight lossy compression, but PrE is natively editing that DV-AVI footage. Now, if one Exports/Shares to DV-AVI, again there is a slight lossy compression, but if they Export/Share to Lagarith, or UT, there is no loss, though there is compression. AE can work with the lossless material fine, so no need for it to re-compress, and no need to introduce loss. When one Exports from AE (no ADL - Adobe Dynamic Link between AE & PrE), again with a lossless CODEC, that IS turned into DV-AVI, when back in PrE, but two levels of lossy compression have been eliminated from the workflow, and eliminating any compression that is lossy is my goal for ultimate quality.
The beauty of Lagarith, or UT, is that the files are much smaller, than with AVI Uncompressed, so other than the encoding porttion of the workflow (both CODEC's are quite fast), the resources needed are greatly reduced.
An extreme example of the use of compressed material is where one produces a DVD (MPEG-2 CODEC, which IS highly-compressed), and then uses that compressed material in a new Project, outputting again to MPEG-2 for a DVD. If one can go to the material, before the first MPEG-2 Encoding, thus saving one level of compression, the qualtiy is much better. Again, this is an extreme example, and the DV/DVC CODEC in a DV-AVI is no where nearly so bad, as with MPEG-2.
Are the extra steps worth the effort? Only the user can determine that.
Just my observations, when creating and editing intermediate files. For me, the advantage outweighs the encoding time, as quality is as high, as I can obtain.
Hunt -
Can I export my sidecar files to two or more hard drives at the same time from one computer?
Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?
Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that. -
I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?
I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?
-
Good evening. When I try to rename a master file or export a master file, Aperature 3 only recognizes the first 9 spaces for raw .NEF files, even though it easily uses twice that many spaces for version names. I have a system in place that works really well for me, wherein by changing the file name I can recognize what's important to me just by glancing at the file name, no matter what system it is in, I do not have to open or mouse over anything to know what the file is. My files also arrange themselves in order no matter what file system they are in. Can someone please tell me if there is a setting, or something I am doing wrong, that prevents me from using a longer Master file name. I can't be the only person who would like to have his Master File names correspond to the name that appears in the Aperature library, and would like to use at least 16 spaces (numbers, letters, etc.)
Thanks,
Photo AlHi Frank,
As you suggested, I am attaching several screen shots. In the first one you can see how I set up my preset. I used "Custom Name" and "Counter" with a dot between the two drag ins, followed by "D90". I also have a dot to seperate the 8 digits in the Custom Name and make it easier to read.
I then click "OK" which takes us to the second screen shot. Here you can see that in the Example File Name everything looks perfect, and you can see I have clicked on "Apply to Master Files".
In the third screen shot you can see that the version in my library did in fact change correctly. With the "mouse over" pop up screen you can see, however, that the Master File name was changed to "1933.1017.NEF". It failed to carry the "12D90" and if I go to where my masters are stored that is exactly what the name was changed to.
In the fourth screen shot I attempt to export the master. You can see how my "Version Name" is set up.
And finally on the 5th screen shot you see in the File Name Example the name "1933.1017.NEF" once again, which when I export the master is exactly how the name will appear. Since I will export more than one file at a time , a (1) and a (2) etc., will appear at the end of the names because all the files are being given the same "1933.1017.NEF" name.
I hope this reply does a better job of clarifying my problem. I am anxious to see if this is something I simply misunderstood, or if I am simply doing something wrong.
Thanks,
Photo Al -
When I export an AAF file/project from Protools 9 using an external drive and import the AAF into Logice Pro X the drum track does not play correctly. It is out of sync with the rest of the track. I created the drum loop as a plugin using Native Instruments Maschine. Has anyone else had this problem?? Also how would I go about exporting the midi tracks from the Protools session. The midi track does not show when the file is imported to Logic Pro X. The midi data should export with the AAF file correct??
Are you using any plugins in Logic?
In Preferences/Audio under the General tab, how do you have the plug-in-latency compensation set? -
How do I export a .doc file to my online adobe account into a .pdf file?
How do I export a .doc file to my online adobe account into a .pdf file?
Hi tennisknight,
The online Adobe account you are referring to, is it Acrobat.com cloud?
You need to purchase a subscription for PDF Pack and then sign in to : https://cloud.acrobat.com/
Select the files saved in 'Acrobat.com' and then click on the 'Create pdf' tab to convert the selected doc files to pdf.
Alternatively you can download the .doc file from the online account and use Adobe Acrobat to convert it to pdf.
Regards,
Rave -
SSIS - Exporting Data into flat files from Oracle Table as batchwise process
Hi All,
Thanks in advance.
I have a Large Table in Oracle Database with some 3 Lakhs record. I need to fetch the 10,000 records for every iteration and export it into the flat file. This process should occur recursively until the table becomes empty.
Hence, For every iteration on flat file to be generated with 10,000 records.
Please help how to proceed further in SSIS.
Thanks
Pyarajan.SYes, it always helps if your question doesn't specify the actual requirements...
Use the FOR loop container to control the iterations of the data flow. For each run you read 10,000 rows from the table and dump them in a flat file. Either move the flat file, or use an expression on the flat file connection manager to give them dynamic
file names.
30 million rows is also not a problem by the way, it just takes a bit longer.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate. -
How to add more disk space into / root file system
Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 965M 767M 149M 84% /
/dev/hda7 1.9G 234M 1.6G 13% /var
/dev/hda6 2.9G 69M 2.7G 3% /tmp
/dev/hda3 7.6G 4.2G 3.0G 59% /usr
/dev/hda2 18G 12G 4.8G 71% /u01
LABLE=/ 2.0G 0 2.0G 0% /dev/shm
/dev/hdb2 8.9G 149M 8.3G 2% /vm
[root@rac2 shm]#Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive. -
Issues in Installing Web AS - Java [ FSL-02077 File system export (share)]
I have installed ABAP Web As - 2004s on my laptop.
I want to intall JAVA Web AS as well. How ever, when I try to install the JAVA Web AS,
It is failing with the following Error:
FSL-02077 File system export (share) saploc does not exist.
it happens after I agree the licence, enter the right JDk version and enter the Permissions file.
I am running on XP Home Edition,
No Fire walls running
No Anti Virus software [ infact I uninstalled it]
No Ports are in use [as per Pre Reqs]
User has the Administrator access
Any insights ... Please ...Hi Vivek:
<b>File system export (share) saploc does not exist</b>
Means that the share is missing, one of the pre-installation steps is create the installation folders and the shares...
folder sap (<drive>:\usr\sap) must be shared as <b>saploc</b> and sapmnt
Hope this help
Juan
Please reward with points if helpful -
Hi Experts,
We have a BO Dashboard (version 4.1) that displays the treasury information on cash flows across various countries and regions.
The dashboard is built on Universe and has large number of components (like filter, aggregation, glow region) with some third party Centigon add on for Google Maps. - GMaps Plugin for SAP BusinessObjects Dashboards provides an interactive map design solution for enterprise dashboards components).
When trying to add more source content to the existing dashboard (and exceeding more than 5000 rows ) and trying to export the dashboard as .SWF file , we are getting a run-time error as below.
But when we minimize the number of rows manually in data mapping (<=4500 rows) we are able to export the .SWF file.
Seriously couldn't arrive at any conclusion or it is a tool limitation.
Please help us in this issue.
Regards,
Prasana RavichandranJustin
I partially agree with you, When I say condition I was talking about LOAD when clause in ACCESS PARAMETERS not where condition of select clause
When you use load condition with a byte range is checked before parsing the row , So to skip a row you can use something like this (seee example below)
CREATE TABLE ext_employees
(employee_id NUMBER(4),
first_name VARCHAR2(20),
last_name VARCHAR2(25),
job_id VARCHAR2(10),
manager_id NUMBER(4),
salary NUMBER(8,2),
commission_pct NUMBER(2,2),
department_id NUMBER(4),
email VARCHAR2(25)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY ext_dir1
ACCESS PARAMETERS
records delimited by newline
LOAD WHEN ( 1:5) != '*****'
badfile ext_bad_dir:'empxt%a_%p.bad'
logfile ext_log_dir:'empxt%a_%p.log'
fields terminated by ','
missing field values are null
( employee_id, first_name, last_name, job_id, manager_id,
salary, commission_pct, department_id, email
LOCATION ('empext.dat')
REJECT LIMIT UNLIMITED
This may solve his problem
Santhosh -
Please help me I do not show icon "next " if you want to export "share " a video file
Hi,
I purchased the program motion 5 from Apple Store
But I have a problem does not appear Icon " next " if you want to export "share " a video file
I experimented with the trial version before to buy the full version
Now I am very disappointed because all attempts failed
I have read some of the solutions in this site but to no avail
Thank you in advance for helping me
SaidThere is no trial version of Motion 5.
What exact "Share" option are you selecting to use?
Maybe you are looking for
-
Scanning issue using Canon Imageclass MF4350d
I am trying to scan using the Canon MF4350d. I am using the Canon MF Tool software and it works great, almost. When putting a multi-page document in the sheet feeder, it makes every page a separate PDF, instead of putting them all in one PDF. Canon t
-
-29541 error while creating AW
We create XML for a new AW using a java program with AWXML.jar. This XML is passed to DBMS_AW_XML.EXECUTE in a PL-SQL package and the AW is created fine in a database instance with 10.2.0.2.0 version(Oracle Database 10g Enterprise Edition Release 10.
-
Any suggestions?
-
CONTROL ON ADVANCE PAYMENT / DOWN PAYMENT
Hi Friends, It is our normal practice to issue Advance payment / Down payment to our vendor against PO. We want to control the same while making cheque payment enable us to control double payment againt same PO after material receipt and passing the
-
Problem in query writting , Need a help on priority
Hi there, Please check the following scenario there are 2 tables event - eventId , userId and eventDate impression - impressionId,userId After joining - userId | impressionId | eventId | eventDate 1 | 1 | null | null 1 | 2 | null | null 1 | 3 | 1 | 2