No more fast GPS fix with 5800 XM v40.0.005 using ...

Hi to all,
I'm so diappointed to have losen one of the best strength of my nokia 5800 XM (fast GPS fix thanks to A-GPS function).
Indeed, it's now inconceivable to hope a GPS fix before 5 or 10 minutes while staying at the same place. Thus, we lose all the interest of the GPS driving through a city !!!!
I tried soft and hard reset but nothing seems to be helpful, i'm now convinced the problem is due to the firmware (v40.0.005 but I already had this problem in v31.0.101).
Unfortunately the new Ovi Maps version didn't either solve the problem...
Could you give your feedbacks on the problem or explain me how the problem might be resolved ?
Thanks to all

I tried soft and hard reset but nothing seems to be helpful, i'm now convinced the problem is due to the firmware (v40.0.005 but I already had this problem in v31.0.101).
As you already had the problem best guess
would be a hardware problem rather than firmware .
Take phone to a Nokia Care Centre or you could try wiping the phone and memory card and starting from a clean install .
jje

Similar Messages

5800 xm v40.0.005 WLAN bug

Hi,
Ever since I updated my firmware to v40.0.005 on 5800 XM, my phone automatically connects to the WiFi working in my home. Even after I have turned off all the settings to autodetect WiFi network.. It automatically connects to WiFi network as soon as I disconnect it manually. Earlier(v30 firmware), it used to connect only when I was using some application with WLan usage..
Its annoying and also draining battery.. I can't switch WiFi router as other devices(laptops, PC) are using it..
P.S. I installed Image Exchange software in new firmware?
Kudos, If I Helped !!!
Solved!
Go to Solution.

Your last statement may have provided the answer. Is Image Exchange set to look for a data connection? I have this problem initially with Nimbuzz and a couple of other apps.
Take a look here: http://imageexchange.nokia.com/help.jsp#faq_15
Message Edited by patruns on 19-Jan-2010 03:37 PM
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Nokia LD-4W GPS receiver with 5800 XM

Is Nokia LD-4W GPS receiver compatible with Nokia 5800? Is it better / more accurate than 5800 built-in GPS receiver?
Solved!
Go to Solution.

LD-3W:
65g (still feels really light)
15 hours operating time
7 Days Standby
It is also a nice small size being compact and light
LD-4W:
31g
11 hours operating time
4 days standby
The only real thing the LD-4W is better than the LD-3W with is looks. Personally-especially as its cheaper-I would go for the LD-3W.
CJSS IT & Multimedia Solutions
http://cjss.eu.org
Was I Helpful? Please Kudos (To Kudos press the green star on the left, thanks.)

Nokia 5800 firmware v40.0.005 bugs that I faced

I was quite happy to see the new firmware update for my Nokia 5800. Looking at the new features like kinetic scrolling etc.. I've installed the update with no second thoughts. I had taken the back-up of what ever I wanted and ready for upgrade.
However, the below is the experience
1. The update went smooth. Phone has automatically restarted after the update.. I'm happy for few minutes.
2. Basic functionality is fine. Some of the applications like Opera Mobile were missing. Understand that I need to reinstall them. Also, wanted to update the Ovi Maps.
3. Tried S/W update option in the phone. No application was able to install or upgrade. After downloading the application, it just says update failed.
4. Tried through PC Suite. Experience is same.
5. Soft reset the phone. Now applications are getting installed or updated. But there's another problem.
6. Phone restarts itself upon any incoming call or alarm or any calendar alert. This was very annoying!!
7. Soft reset the phone again. Imported the back-up.
8. With zero customizations, the basic functionality is back.
9. Installed Opera Mobile back. Phone is working fine. But the touch key board provided by Opera is gone. It goes to phones default input mode.
10. All the applications like Fring, Google Maps, GMail are gone.
11. Installed Fring (from Ovi store). Phone restarted.
12. The incoming call problem is back. I can't simply take any incoming call. Phone reboots automatically, when I hit any option on the screen.
13. Uninstalled Fring.. Problem still exist.
14. Soft reset again.. basic things are back.
15. Don't have enough guts to install any new software.
Summarizing:
1. The firmware is very very unstable. It seems to have a very narrow happy path.
2. Beware!! Basic things like incoming calls are affected.
3. Some applications are not happy with new firmware. They can break the phone.
4. If you had any security related application like WaveSecure, do not forget to install it again.
Other issues found:
1. Pause functionality has disappeared in the Recorder tool.
2. GPRS / WAP access points are taken in the order of preference.
Other than kinetic scrolling, I didn't find any major difference / benefit from this update.
Do it at your own risk.

instead of searching, here it's :
how to answer / stop alarm
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

I need help with my Nokia 5800 update to v40.0.005

Hey im having trouble with updating my Nokia 5800 to v40.0.005.
The version on my phone at the moment is v21.0.025 and when i try to update it on my phone it says no update available.
I tried downloading Nokia Update Software and getting it from there but the program wouldnt work either.
Is there any other way i can get the v40.0.005 were it should work? or even getting the knetic scrolling and applications without needing to get v40.0.005?
Please need help!
Thanks
Solved!
Go to Solution.

Under your battery, there's a product code on a sticker (X: 0586707). Go here: http://europe.nokia.com/support/download-software/device-software-update/can-i-update and type in your productcode to see if there should be an update for your productcode. If there's not, you could take your phone to a Nokia Carepoint and ask if they could do it - no promises. Or else you have to wait untill your productcode gets it.

Nokia 5800 V40.0.005

I have updated my Nokia 5800 to V40.0.005. It has worked fine however the home screen contacts bar is now a lot larger and i can not fit in all the contacts i wanted. Is there anyway of making 4 fit accross the screen?
Solved!
Go to Solution.

0575581: RM-356 Country Variant United Kingdom GB - MR
as meentioned 10000 times before ...
updating to new firmware depends on product code which represents your region of purchasing, language pack and if it's branded or not .... so NOKIA releases firmwares and release it for every product code depending on mentioned points
you can check for updates @ :
http://mea.nokia.com/support/download-software/device-software-update/can-i-update
To find what the latest available device software is, you’ll need your device’s product code. The code is printed on the white label beneath the battery (e.g. CODE: 0520001).
if your phone is branded with an operator, that means that you should go to the operator care center and ask them, not NOKIA
some updates delay in some countries variant product code, as it requires more effort to add language pack to it like and in some certain countries "example. China Japan Korea" or it needs the country to approve it due to its policy
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

With iOS no GPS-Fix

After updating my 3GS from 3.1.3 to 4.0, i don't get no more gps fix. What's up?

I'm getting very interested in GPS problems across the iPhone range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

OSX Lion with ALUA support actually broke more than it fixed for us

Hi
As you guys know Apple introduced ALUA in to Lion and when they bumped up the specs of Xsan. Most people seems to be really happy about this but in our case it actually broke more than it fixed. With our ATTO Celerity ES41 and LSI quad channel fibre cards we only see half of our LUNs. The explanation I got from the ATTO support was:
"The problem with this is that we don't really support connectivity to the LSI Netapp Engenio arrays with Multipathing on Lion with the 4Gb cards. Only the 8Gb cards are supported. The problem is we no longer can control this in Lion. In Snow leopard, there is an nvram switch to disable MPIO...In Lion, we can not do this due to Apple implementing ALUA in the OS itself. Our standard driver hooks into ALUA, and the MP Driver hooks into our own MP subsystem."
So the ATTO cards are out of the picture and ATTO wont come up with a fix. The jury is still out over at LSI and I*m waiting to hear back from them. But what I wonder is exaclty what it was that went wrong when Apple "fixed" this...? Is there a "legacy" mode that I can switch over to in some way? We can't replace all our fibre cards over this, that would be redicilous.
Cheers and thanks in advance

Here's some output from the clients... Let's start with the SNOW LEOPARD client:
mekfcp03s-mac-pro:~ mekfcp03$ sudo cvadmin
Xsan Administrator
Enter command(s)
For command help, enter "help" or "?".
List FSS
File System Services (* indicates service is in control of FS):
1>*nl01[0]              located on 1.53.1.1:32850 (pid 10202)
Select FSM "nl01"
Created           :          Mon Dec 13 16:47:16 2010
Active Connections:          7
Fs Block Size     :          16K
Msg Buffer Size   :          4K
Disk Devices      :          18
Stripe Groups     :          6
Fs Blocks         :          1280250440 (19.08 TB)
Fs Blocks Free    :          821827938 (12.25 TB) (64%)
Xsanadmin (nl01) > show
Show stripe groups (File System "nl01")
Stripe Group 0 [SD0] Status:Up,MetaData,Exclusive
Total Blocks:1245184 (19.00 GB) Reserved:0 (0.00 B) Free:1155397 (17.63 GB) (92%)
MultiPath Method:Rotate
    Primary Stripe [SD0] Read:Enabled Write:Enabled
Stripe Group 1 [SD1] Status:Up,Journal,Exclusive
Total Blocks:66128 (1.01 GB) Reserved:0 (0.00 B) Free:65104 (1017.25 MB) (98%)
MultiPath Method:Rotate
    Primary Stripe [SD1] Read:Enabled Write:Enabled
Stripe Group 2 [DATA0] Status:Up
Total Blocks:448245140 (6.68 TB) Reserved:270720 (4.13 GB) Free:230827236 (3.44 TB) (51%)
MultiPath Method:Rotate
    Primary Stripe [DATA0] Read:Enabled Write:Enabled
Stripe Group 3 [DATA1] Status:Up
Total Blocks:448245140 (6.68 TB) Reserved:270720 (4.13 GB) Free:312787356 (4.66 TB) (69%)
MultiPath Method:Rotate
    Primary Stripe [DATA1] Read:Enabled Write:Enabled
Stripe Group 4 [DATA2] Status:Up
Total Blocks:191880080 (2.86 TB) Reserved:270720 (4.13 GB) Free:114779366 (1.71 TB) (59%)
MultiPath Method:Rotate
    Primary Stripe [DATA2] Read:Enabled Write:Enabled
Stripe Group 5 [DATA3] Status:Up
Total Blocks:191880080 (2.86 TB) Reserved:270720 (4.13 GB) Free:163433980 (2.44 TB) (85%)
MultiPath Method:Rotate
    Primary Stripe [DATA3] Read:Enabled Write:Enabled
Xsanadmin (nl01) > exit
mekfcp03s-mac-pro:~ mekfcp03$ sudo cvlabel -ls
/dev/rdisk6 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA00" Controller#: 'default' Serial#: '600A0B800056167A000003BB498B39EE' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk7 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA02" Controller#: 'default' Serial#: '600A0B80005045D8000001C5498B43B8' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk24 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA01" Controller#: 'default' Serial#: '600A0B80005616F80000039B498B3C19' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk21 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA03" Controller#: 'default' Serial#: '600A0B80005061D4000001B4498B45E1' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk23 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA04" Controller#: 'default' Serial#: '600A0B800056167A000003BD498B3A78' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk22 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA06" Controller#: 'default' Serial#: '600A0B80005045D8000001CB498B4442' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk25 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA07" Controller#: 'default' Serial#: '600A0B80005061D4000001B6498B4671' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk26 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA05" Controller#: 'default' Serial#: '600A0B80005616F80000039D498B3CA5' Sectors: 3585963712. SectorSize: 512. Maximum sectors: 3585963712.
/dev/rdisk27 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA08" Controller#: 'default' Serial#: '600A0B800056167A000003BE498B3AFC' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk32 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA10" Controller#: 'default' Serial#: '600A0B80005045D8000001CC498B44CA' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk29 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA11" Controller#: 'default' Serial#: '600A0B80005061D4000001B7498B46FD' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk34 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA09" Controller#: 'default' Serial#: '600A0B80005616F80000039E498B3D37' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk31 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA14" Controller#: 'default' Serial#: '600A0B80005045D8000001CD498B4552' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk28 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA12" Controller#: 'default' Serial#: '600A0B800056167A000003BF498B3B88' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk30 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA15" Controller#: 'default' Serial#: '600A0B80005061D4000001B8498B478B' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
/dev/rdisk33 [ENGENIO INF-01-00       0623] acfs "MEK_NL01_DATA13" Controller#: 'default' Serial#: '600A0B80005616F80000039F498B3DC7' Sectors: 1535042944. SectorSize: 512. Maximum sectors: 1535042944.
mekfcp03s-mac-pro:~ mekfcp03$ sudo cvadmin
Xsan Administrator
Enter command(s)
For command help, enter "help" or "?".
List FSS
File System Services (* indicates service is in control of FS):
1>*nl01[0]              located on 1.53.1.1:32850 (pid 10202)
Select FSM "nl01"
Created           :          Mon Dec 13 16:47:16 2010
Active Connections:          7
Fs Block Size     :          16K
Msg Buffer Size   :          4K
Disk Devices      :          18
Stripe Groups     :          6
Fs Blocks         :          1280250440 (19.08 TB)
Fs Blocks Free    :          821827938 (12.25 TB) (64%)
Xsanadmin (nl01) > disks
Disks (File System nl01)
acfs Disk Volumes:
MEK_NL01_DATA00 on device:rdisk6          sectors: 3585963712 sector size: 512
MEK_NL01_DATA01 on device:rdisk24          sectors: 3585963712 sector size: 512
MEK_NL01_DATA02 on device:rdisk7          sectors: 3585963712 sector size: 512
MEK_NL01_DATA03 on device:rdisk21          sectors: 3585963712 sector size: 512
MEK_NL01_DATA04 on device:rdisk23          sectors: 3585963712 sector size: 512
MEK_NL01_DATA05 on device:rdisk26          sectors: 3585963712 sector size: 512
MEK_NL01_DATA06 on device:rdisk22          sectors: 3585963712 sector size: 512
MEK_NL01_DATA07 on device:rdisk25          sectors: 3585963712 sector size: 512
MEK_NL01_DATA08 on device:rdisk27          sectors: 1535042944 sector size: 512
MEK_NL01_DATA09 on device:rdisk34          sectors: 1535042944 sector size: 512
MEK_NL01_DATA10 on device:rdisk32          sectors: 1535042944 sector size: 512
MEK_NL01_DATA11 on device:rdisk29          sectors: 1535042944 sector size: 512
MEK_NL01_DATA12 on device:rdisk28          sectors: 1535042944 sector size: 512
MEK_NL01_DATA13 on device:rdisk33          sectors: 1535042944 sector size: 512
MEK_NL01_DATA14 on device:rdisk31          sectors: 1535042944 sector size: 512
MEK_NL01_DATA15 on device:rdisk30          sectors: 1535042944 sector size: 512
Xsanadmin (nl01) >

Firefox corrupted the file I download. Upon fix with reset or uninstal, more problem happened

This all started 5 hours ago, when I tried to download a .doc file from my school website but Microsoft Word opened it with "file conversion" options and the preview is filled with unreadable codes. I was using Nightly 64-bit on a newly installed Windows 8.1 64 bit system (about a week ago after I upgrade my ssd).
1. I tried open other .exl file from the same website, but Microsoft Excel could not open it at all saying the file is corrupted. I used IE 11 to download the same files and it worked perfectly. Problem with Nightly it looked like.
2. I reset Nightly then tried to download the same file again, not working. Tried safemode disable all addons and try to download the .doc file. It surprisly worked!. So it seems like an addon problem. Then I disabled all addons manually restarted again but tested not working. I was really frustrated at this point so I believe my Nightly was hacked by malware or some hidden plugins.
3. Uninstalled Nightly then I cleaned all files left with Ccleaner. I checked full scan with Windows security essential; downloaded malware cleaner "Malwarebytes". Yes a few malware like files were detected and cleaned up.
4. Downloaded waterfox 64-bit but now more problems appeared. It still cannot download the .doc or exl file now. The right click menu is not showing up at any webpage, image or highlighted texts. Ctrl+click link to open link in new tab is not working, just nothing happens. I try to reset or safemode restart, Nope! the help menu is gone, perfectly clear!
In brief, I would not like to reinstall my OS for this issue. I wish I could find some software remover that detects firefox virus pluggins. I don't want to try the 32-bit version of firefox for this issue.
Thank you.

Thanks for the fast reply.
I deleted everything, and download the official firefox 32-bit and tried your advice disable everything. Yes it worked! it brought up the help menu.
And the word document is working as well after I could 'help-troubleshoot-rest firefox'.
Thank you very much. I think it was the Nightly setup naturally not compatible with .doc links. It also messed up the settings for my waterfox/firefox which I downloaded later.
However the right-click menu is still not normal. nothing shows up nor I could open up link in a new window. This did not happened in Nightly as I stated in the original question. Any suggestions?
Btw. After this I might stay with the official firefox 32-bit for now. is there any performance difference with 64-bit or compatible issue with Windows 8.1? I know that 64 bit firefox is not released yet.

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

philips69374220 a écrit:
I have Elements 10. It doesn't handle RAW.
Yes, it does.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
It can handle the raw files covered by the ACR 6.7 version.
For newer cameras, you can use the free Adobe DNGconverter to batch convert a folder into the DNG raw format that PSE10 can read and edit.
(see the link in the upper document)
Fine JPG to be downloaded at a time.
All versions of Elements can open many jpegs at the same time, and the organizer lets you import as many as you want?

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

E52 internal GPS fix problem only with OVI Maps

Hi all,
I read many many E52 phones suffer Internal GPS fix problems.
I don't beleve this is an hardware problem, but only a software bug.
My experiments say this:
1) Start phone, start Ovi Maps -> No lock at all. (only 1 blinking line in bottom left corner)
2) Start phone, start McGuider (Sygic) navigator -> E52 locks quite immedeately. (in the same place!!)
3) After GPS is locked, start Ovi Maps again. Now also Maps works great!
4) Also the gps built-in application under Menu->Applications->GPS->GPS Data has the same behaviour as Ovi Maps.
Anyone can try and report this or similar experience?
Thank you!

uallaualla wrote:
Thank you for the response.
I'm sure the fix is faster if i use A-GPS, but i i have to pay for data connection.
And, above all, Sygic works perfectly WITHOUT A-GPS, so why Ovi Maps does not?
Yes, you have to pay, but the connection takes about 20sec. About Sygic you're right I noticed that too. It locks pretty fast.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

GPS Fix problem

Hi all,
I'm a developer for IGN France, I develop an app in Qt which uses Location API.
I really don't understand the GPS on the 5800 XpressMusic.
I explain, when I'm using the GPS, the first fix takes several time (10 to 20min), for the first fix, I know that's normal.
But if I turn off the GPS for 20min, the next fix take 10 to 20 min but not everytime...
And that happen with a clear sky, without any cloud...
All is done without the A-GPS activated because my app will be used in some place that you can't use A-GPS.
So why,for the second fix, it takes so long sometime and sometime it's very fast ?
Is there a config file which store some informations like others devices ?
Or all my customer must use A-GPS everytime they need the location ?
Thank for reply.

When the phone has a clear satellite signal it starts caching ephemeris data. This information will speed up future GPS locks, but the data expires relatively quickly (hence the name).
Help I'm trapped in a sig factory.

How Can i clean my memory and make my imac more faster ?

I am new user in mac i have imac 4 g ram and need a way to clean the memory and make my imac more faster ...

You can't "clean" RAM. If the "storage" space on your hard drive isn't enough then put in a larger hard drive or delete any of your data you no longer need or can store on an external drive. Beyond this I cannot say because you have not provided enough information such as the amount of installed RAM, Capacity of your hard drive and the amount of available space on the hard drive, the specific iMac model you have.
You can try reinstalling Lion:
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
However, if your computer doesn't have enough RAM or your hard drive is full, then reinstalling won't help.

5230 GPS fix problem (have gps signal but no gps f...

hi
i have a nokia 5230
software version V20.0.005 / 23-03-2010
custom version 20.0.005.315.02 / 29-04-2010
type RM-588
not updated
CODE 0597862 - Latest available software for your device Version 20.0.005
GPS positioning methods:
A-GPS = OFF (I dont have/dont want data traffic charge)
IntGPS = ON
BlueGPS = OFF
Network Based = ON
Positioning server use = disable
Software used:
Default nokia gps applications - GPS positioning (not the ovi map)
Nokia sports tracker v3.50(0) (S60 3.1) 2-08-2010 (mostly for GPS logging)
Garmin XT
The problem - GPS fix is taking (sometimes) very long periods from 1 - 5 hours or in same cases it does not make a GPS fix. Other times (about 25% of tries) it calculates GPS fix in a few minutes (1-15min).
I use the GPS only outdoors within open sky and hill/forest (not in urban, tall buildings). Usualy is clear sky or clouds, but not storms.
The Satellite info page displays me the satelite signals, and usually I have about 6-11 satelites bars and from them about 4-7 with more then 75% signal.It is very frustrating to have gps satelite signal and not have a gps fix. This is obvios a software related problem not a weak gps signal.
DOES anybody had this issue and know how to solve it? I suspect a firmware bug... but I dont really know.
Thank you.

My new 5230 takes ages to get a GPS fix. Nokia suggested the following. It seems to have given me route not found errors but I'm still testing. I reproduce Nokia's suggestion here it case it helps you...
We understand that you are having some issues with the GPS function of your Nokia 5230. In response to your concern, may we recommend that you power cycle your phone. Please follow the stepls below:
1. While your phone is switched on, remove the battery.
2. Press and hold the power button for 15 seconds.
3. Put the battery back in.
4. Turn your phone back on.
After you have performed the steps mentioned above, kindly perform a soft reset on your device.
To perform a soft reset, please follow the steps below. Please note that this will restore your phone's settings and will not delete any data.
1. Go to your phone's main screen and press *#7780#.
2. You will be prompted to restore the factory settings and it will ask for a lock code. If you have not changed the code, the default is 12345.
3. Your phone will automatically restart after pressing the code.

No more fast GPS fix with 5800 XM v40.0.005 using ...

Similar Messages

Maybe you are looking for