No more Fetch-ing for FTP

The problem I'm having is pretty simple and consistent. Since upgrading to Mac OS X v10.7 Lion, I can log onto servers, using either Connect to Server or typing a URL into Safari, but even with an admin password, I can't move files into a folder. This used to be so easy when I was using Fetch to transfer files, and I had all of my shortcuts set up. But now, I don't understand why I can't drag any files into any folders or onto any of the FTP servers I've been using forever. I don't think my clients will be happy about it for long, either, and I don't want to keep using Dropsend to relay the largest files.
Any suggestions will be greatly appreciated. Thanks!

I should have explained the situation more clearly. I tried to use Fetch 5.7 as I usually would to do file transfers this morning -- this being the first time I had launched it in Lion. The application quit immediately after launching. Being under a time crunch, I was not able to investigate this at the time, and, because I'd mistakenly read something about not needing FTP software in a recent book on Lion, I mistakenly assumed that there was a conflict between Fetch and Lion. Going back and rereading the same material, I see that it is just referring to using a browser for FTP, which I already knew. But because I wasn't able to upload files -- only view and/or download -- I figured there was a problem. Now I know there wasn't a problem with Fetch, nor was there a problem with Lion.
When I had time to step back and research this, I found that it's a conflict between Fetch and the 3ivx codec. Once I'd uninstalled this, I was able to use Fetch 5.7 with no problems. How embarrassing, but sometimes, deadlines blot out everything.
My apologies for the false alarm.

Similar Messages

  • Using Finder for FTP.

    I'd like to use the Finder's FTP capability but am having difficulties getting it working. 
    As I understand it I should be able to go to Go > Connect to Server.... I then enter the URL; ftp://ftp.freenetname.co.uk/public_html/. I am then prompted for my Username and Password. This appears to accept it fine but the resulting connection has no contents.
    I've also tried without the /public_html/ on the end.
    Does any know if this should be possible and what I might be doing wrong?
    The only thing that is slightly odd is that my Username contains an @ symbol (mandated by my ISP at the time when I set it up). Could that be causing the problem?
    VMT in advance
    mrtotes

    To be honest I'm a bit confused anyhow (it doesn't take much ;-)) as Freenetname gave me a free domain name (hence their cunning name!) but they have since been bought-out by the ISP Madasafish. Now no Web addresses with the freenetname domain work. 
    I can, and have been for many years, access ftp://ftp.freenetname.co.uk just fine using OneButtonFTP/Fetch and have just tried CyberDuck to access it tonight; so I know the address is fine.
    I believe that the following URL is used for FTP access: ftp://username:[email protected] however as mentioned before Freenetname mandated that the username had to be [email protected] giving the total URL asftp://[email protected]:[email protected] I can only assume that the additional @ symbol is stalling the process as everything else seems to be in order.
    I'm going to mark this as answered. The fact that you can't upload in the Finder is good enough reason for me not to waste any more of my processor cycles on the problem.
    Thanks to all.
    mrtotes

  • How do i create 2 fetch proceess for diffrent table  in the same apge

    hi,
    i create page with 2 from region each region assign to different table each region with DML BUTTON( CREATE,DELETE,UPDATE),there 2 Processes after header to fetch row into two region .now when i run page give me error Column t2 not found in table 1 where the 1st fetch rows Processes fetch data for all item in page Regardless of table name so give me error.
    i mean that
    Region one contain table 1 ....with Fetch row process ( to retrieve data into table 1)
    Region Two Contain table 2....with Fetch row process( to retrieve data into table 2)
    when i run page give me error Column t2 not found in table 1 and when test the sql stetmeni in debug mode i found that the process take all item in page so give this error where column t2 found in table 2 not one ..
    my question
    1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
    2- how can create manual process to fetch row into specific items in page ( i tray these code
    SELECT col1, col2, col3 ....
    INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
    FROM table
    WHERE id = :P_id ) but no data retrieve .
    thanks
    Ahmed
    Edited by: Ahmed.F on Nov 27, 2012 5:10 PM

    my question
    1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
    2- how can create manual process to fetch row into specific items in page ( i tray these code
    SELECT col1, col2, col3 ....
    INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
    FROM table
    WHERE id = :P_id ) but no data retrieve .
    I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
    ORA-01403: no data found : Unable to fetch row multiple automated row fetch
    On your second question, the manual process should work provided:
    P_ID has a value when the process executes. You can do it this way:
    i. Make this process as a on-load After/Before header process
    ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

  • Trying to limit a user on OSX Server to one directory for FTP

    Hey there everybody,
    I'm trying to set up a client FTP for a new mac mini running OSX Server (Mavericks). FTP is enabled and I am able to get and put files but, the server is going to be used for a client services company and we will need to use it to transfer files back and forth without allowing access to the whole machine. The core issue is when I FTP in as a user I can still move around and see folders and files. I would like to create a user that can only see one folder or directory and only get / put files to that one place. Can't seem to find any similar posts, though I would assume this is fairly common.
    Huge thanks in advance!

    Hello again,
    I have tried sending messages from my webmail account in another domain and get the following reply:
    This is the Postfix program at host www.patrickwgill.com.
    I'm sorry to have to inform you that the message returned
    below could not be delivered to one or more destinations.
    For further assistance, please send mail to <postmaster>
    If you do so, please include this problem report. You can
    delete your own text from the message returned below.
    The Postfix program
    <[email protected]>: Command time limit exceeded:
    "/usr/bin/cyrus/bin/deliver"
    Reporting-MTA: dns; www.patrickwgill.com
    Arrival-Date: Sun, 8 Jan 2006 14:05:25 -0500 (EST)
    Final-Recipient: rfc822; [email protected]
    Action: failed
    Status: 5.0.0
    Diagnostic-Code: X-Postfix; Command time limit exceeded:
    "/usr/bin/cyrus/bin/deliver"
    So, it appears to be just hanging for some reason and timing out. Any ideas? I really appreciate your help.

  • Security connection provided by SAP XI for FTP

    Hi All,
    In many implementations Business requirement is to security connection provided by SAP XI for FTP and to third-party system.
    Could you pls let me know the steps which i need to take care/ or shall i use the same File adaptor for this or any special adaptor i need to use.
    Pls give me some points how we can implement and give me some links to get the information please.
    GnuPG is a free tool for secure communication based on public keys how i can i use this in SAP XI
    Thanks in advance

    Hi,
    According to your requirement need to enable SSL certificate option, for more information find below link
    http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/23894238-0701-0010-40b0-a0a6d5c4ad9f?prtmode=navigate

  • Batch fetch optimization for lazy collections

    Hi,
    I feel like this question must have been asked by somebody already but couldn't find any answers in the forum.
    We're trying to evaluate migrating from Hibernate to KODO JDO. One feature we use extensively from Hibernate is the "batch fetch optimization for lazy collections".
    For instance, there's a class User with collection "Set<String> permissions". In the DB, there're tables USER(id, name, etc) and USER_PERMISSIONS(user_id, permission) with one-to-many relationship b/w them.
    Suppose the code is the following:
    query = ....;
    List<User> users = (List<User>) query.execute();
    for (User user : users) {
    println("User: " + user.getName());
    println("Permissions: " + user.getPermissions());
    I've setup EagerFetchMode to parallel. For field "permissions" I had to specify default-fetch-group="true" b/c I wanted this to happen lazily. When I look through the logs, I see that permissions SQL query is executed for each user.
    With Hibernate we were to setup mapping the way that permissions are not fetched at first, but when they are requested for the first user (user.getPermissions()) they are automatically selected for several users in one query using SQL IN clause (similar to the parallel mode).
    Is this possible to recreate the same in KODO JDO? (JPA?) If it is, this would greatly simplify migration. Please notice, that we can't use explicit fetch groups for this, b/c we don't know ahead which collection can be navigated (in the real life User class have many relationships).
    thanks in advance,
    Dimitry

    Kodo doesn't have a direct analog for that behavior. The typical way to solve that problem is to keep the field out of the default fetch group, and then explicitly include the desired field in the current fetch group at runtime. In pure JDO, you can do this by creating a separate fetch group that includes the relationship field, and designating that the query should use that fetch group:
    <pre>
    query = ...;
    query.getFetchPlan().addGroup("relationshipGroup");
    List<User> users = (List<User>) query.execute();
    </pre>
    Kodo has JDO extensions that allow you to do this a bit more easily:
    <pre>
    query = ...;
    ((kodo.jdo.KodoFetchPlan) query.getFetchPlan()).addField("com.example.User.permissions");
    List<User> users = (List<User>) query.execute();
    </pre>
    Finally, you can do this with Kodo's JPA extensions like so:
    <pre>
    import org.apache.openjpa.persistence.OpenJPAQuery;
    query = (OpenJPAQuery) ...;
    query.getFetchPlan().addField("com.example.User.permissions");
    List<User> users = (List<User>) query.getResultList();
    </pre>
    Note that in all cases, you could also make this change to the current PersistenceManager / EntityManager's fetch plan instead, to make the change happen for the duration of the use of that manager. In that environment, the change would need to happen before the query was created.
    (And no, I have no idea why the edit box has a 'pre' button but does not seem to do anything with the resulting tags.)
    -Patrick

  • How to set the fetch size for a ResultSet object?

    Connection con  = getConnection();
    Statement stmt = con.createConnection();
    ResultSet res = stmt.executeQuery("select * from table");
    //res.setFetchSize(?);
    while (res.next)
    res.get....
    }I do not know the number of rows .
    How can I set the fetch size for the ResultSet object?
    I try
    res.last();
    res.setFetchSize(res.getRow()/2);
    res.beforeFirst();
    while (res.next)
    res.get....
    }but it's so slow if there are 6000 rows.
    How can I set the fetch size for the ResultSet object more effectible?
    And what is the best number to set the fetch size?

    The fetch size defaults to a standard number. It is unlikely that it will be any faster if you set it unless you only plan to read a small number of rows.
    i.e. if you are going to read all the rows, you need to read all the rows no matter what.
    Unless the system has set the fetch size to 1 changing it will not be faster.
    Depending on the row length, reading in 6000 rows is going to take a long time. You could try using a cpu profiler to improve performance.
    Do you really need to read everything in every row?

  • How to create one more server node for SAP J2EE server?

    Hi,
    Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
    Thanks and Regards,
    Smriti.

    Hai,
          Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
    click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
    Thanks and Regards,

  • If I have multiple apple devices and use the same iCloud login on them, shouldn't apple give us more iCloud storage for each device

    If I have multiple apple devices and use the same iCloud login on them, shouldn't apple give us more iCloud storage for each device

    Welcome to Apple Support Communities
    No. Apple only offers 5 GB of free iCloud storage for all your devices, no matter how many you have got. If you need more iCloud storage, purchase storage.

  • How to fetch data for a struture from a cluster table

    How can I fetch data for a struture, from a cluster table, based on the name of the structure?

    Hi,
    In order to read from Cluster DB Table use the following statement:
    Syntax
    IMPORT <f1> [ TO  < g1 > ] <f2> [TO < g2 >] ...
    FROM DATABASE <dbtab>(<ar>)
    [CLIENT <cli>] ID <key>|MAJOR-ID <maid> [MINOR-ID <miid>].
    This statement reads the data objects specified in the list from a cluster in the database <dbtab>.
    You must declare <dbtab> using a TABLES statement. If you do not use the TO <gi> option, the
    data object <fi> in the database is assigned to the data object in the program with the same
    name. If you do use the option, the data object <fi> is read from the database into the field <gi>.
    For <ar>, enter the two-character area ID for the cluster in the database. The name <key>
    identifies the data in the database. Its maximum length depends on the length of the name field
    in <dbtab>.
    The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
    For Eg:
    PROGRAM SAPMZTS3.
    TABLES INDX.
    DATA: BEGIN OF JTAB OCCURS 100,
    COL1 TYPE I,
    COL2 TYPE I,
    END OF JTAB.
    IMPORT ITAB TO JTAB FROM DATABASE INDX(HK) ID 'Table'.
    WRITE: / 'AEDAT:', INDX-AEDAT,
    / 'USERA:', INDX-USERA,
    / 'PGMID:', INDX-PGMID.
    SKIP.
    WRITE 'JTAB:'.
    LOOP AT JTAB FROM 1 TO 5.
    WRITE: / JTAB-COL1, JTAB-COL2.
    ENDLOOP.
    Regards,
    Neha
    Edited by: Neha Shukla on Mar 12, 2009 1:35 PM

  • CRS Install hostname being used by more than once for the same node.

    Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
    "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
    Has anyone experienced this error message before and know what the cause is?
    Could it be a problem with the /etc/hosts file?
    Thanks in advance,
    M

    Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
    Also, the installer may complain if your private and public IPs are configured under the same subnet.
    Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
    - public name and IP addresses of ALL nodes
    - private name and IP addresses of ALL nodes
    - VIP name and IP addresses of ALL nodes
    Hope that helps
    B.

  • My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

    My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do.  I keep force quitting the applications and turning the computer off but it happens again after a while

    Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

  • Error Message: Your mac osx startup disk has no more space available for application memory.

    Hi everyone:
    I have a 2010 27" imac.  Dual Core i3, 3.2 GHz and 8GB of 1333MHz DDR3 RAM, and a 90% empty 500 GB Hard Drive.  Running Snow Leopard 10.6.6
    I have received a message intermittently since I got the iMac.  The Force Quit menu comes up and says "Your mac osx startupdisk has no more space available for application memory".  Sometimes there are a few applications open.  Sometimes none.  Whenever I look in the Activity Monitor Utility I see 2 or 3 gigs of RAM still available for use, and lots of hard drive space. 
    Im not sure why I'm getting the message, nor what to do to rectify it.  Quitting applications, like it suggests doesn't seem to help.
    I am grateful for any advice.
    Lauren

    Hey Lauren.
    First of all you do have some software updates you should be doing. 10.6.7 came out a few weeks ago. Sometimes doing all of your software updates resolve issues such as this.
    To check for software updates click the Apple and then Software updates.
    As this issue is someone broad, I would test one of the articles below to narrow down your issue.
    http://support.apple.com/kb/HT1199?viewlocale=en_US
    http://support.apple.com/kb/TS1388?viewlocale=en_US
    Let me know if you need extra ideas.
    Regards,
    Britt.

  • WCCP on ASA for FTP over HTTP

    Hello,
    We have a WSA appliance that we have in explicit mode and want to configure as transparent. The protocols we cache and analyze with WSA are HTTP, HTTPS, native FTP and FTP over HTTP.
    Is there a service number on WCCP for FTP over HTTP protocol? Or it is included within HTTP?
    Thanks a lot in advance.
    Best regards,
    Igor

    Igor,
    The service number 60 (ftp-native service) only applies  to transparent redirection of FTP native requests and does not apply to  FTP-over-HTTP requests.
    On the other hand; the Content Engine listens for redirected HTTP  requests on the standard HTTP port (default port 80). To enable the  Content Engine to listen for WCCP-intercepted HTTP traffic on ports  other than the default port, configure the custom-web-cache service (98 and 99) or a  user-defined WCCP service (services 90 to 97).
    I hope this helps.
    Regards,
    Juan Lombana
    Please rate helpful posts.

  • Which credentials to be used for ftp login to asm content via xml

    Hello,
    we've got some databases running in an Oracle 11.2 RAC environment with ASM.
    XML DB for FTP is activated and a connection can be established.
    The documentation recommends to connect with user SYSTEM, which I don't understand,
    since the target is the ASM instance and not a user's database.
    As far as I know there is only user SYS (and one SNMP user) defined in ASM -
    and in fact I get remotely connected to ASM with user SYS and its corresponding password.
    The user SYSTEM ist defined in each of our four user databases that are clients to only one ASM instance;
    each has got a different password and so I ask, which user SYSTEM should be used for FTP to ASM data ?
    Is there any documentation about that ?  I couldn't find any so far.
    Thanks and kind regards,
    Bernd

    You made this case clearer to me now, but your last question ist exactly the point in question.
    Meanwhile I found the password for the correct database, i.e. "sogabo"  (there are only 2, not 4 DBs configured).
    Here is the output from the listener status command, that maybe can help:
    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 27-JUN-2013 15:48:25
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
    Start Date                27-JUN-2013 13:50:14
    Uptime                    0 days 1 hr. 58 min. 11 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/app/11.2.0/grid/network/admin/listener.ora
    Listener Log File         /u01/app/11.2.0/grid/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.115.201.141)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.115.201.143)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=borac41-loga.gkdruhr.de)(PORT=7787))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "+ASM" has 1 instance(s).
      Instance "+ASM1", status READY, has 1 handler(s) for this service...
    Service "SYS$SYS.KUPC$C_1_20130627140309.TOGABO" has 1 instance(s).
      Instance "togabo1", status READY, has 1 handler(s) for this service...
    Service "SYS$SYS.KUPC$S_1_20130627140309.TOGABO" has 1 instance(s).
      Instance "togabo1", status READY, has 1 handler(s) for this service...
    Service "sogabo" has 1 instance(s).
      Instance "sogabo1", status READY, has 1 handler(s) for this service...
    Service "sogaboXDB" has 1 instance(s).
      Instance "sogabo1", status READY, has 1 handler(s) for this service...
    Service "togabo" has 1 instance(s).
      Instance "togabo1", status READY, has 1 handler(s) for this service...
    Service "togaboXDB" has 1 instance(s).
      Instance "togabo1", status READY, has 1 handler(s) for this service...
    The command completed successfully

Maybe you are looking for