No more internet connection to P1i via Airport Extreme?

After yersterdays (03-1-08) Airport Extreme update my SonyEricsson P1i gets no more internet connection via WiFi. Whats happening?

Seems Apple temporarily removed the the airport update with no explanation as to why, but i see it is once again available for tiger as well as leopard.
Not sure if anything has changed but maybe you should try reinstalling?

Similar Messages

Problem with sharing internet connecting with Wii via AirPort

I have an iMac running the latest updates of 10.0.4. My internet is DSL, so it comes into the modem via the phone, and then the modem connects to the iMac via an Ethernet cable. ie: I don't have a wireless network.
I just bought a Wii and want to connect it to the internet using the built in AirPort feature of the iMac. After I turn on Internet Sharing in Sharing, the Wii will find the iMac as an Access Point (that's the term in the Wii menu).
The problem I have is that the Wii will not connect to the internet unless I turn off the firewall in OS X. Obviously, this isn't a great solution to getting the Wii connected.
Does anyone have any idea of how to allow the Wii through the firewall without turning off the firewall.
Thanks.

Though this link talks about blocking them, you should be able to reverse it...
http://www.ist.uwaterloo.ca/security/howto/2007-07-31/
In the Firewalltab>Advanced, is UDP being blocked? You can also open specific ports.

Sharing internet connection with Windows via Airport

Happy New Year, all!
I have an iMac Intel Core Duo connected to an ADSL modem via ethernet. I'd like to share my internet connection via Airport with a Windows laptop (which is running XP with SP2). I've read that this is possible and I've tried setting it up but the laptop isn't seeing the Airport network at all.
I've created a network with security off, from the Airport drop-down menu in the iMac menu bar, turned Internet Sharing on (Share from: ethernet - to computers using: Airport). I have Windows Sharing and Personal Web Sharing turned on, and my firewall is off. But the Airport network still doesn't show up on the laptop.
Can anyone tell me what I'm doing wrong, or at least point me in the right direction.
Many thanks in advance.

i am having the same problem. i have the mac connected but when i go to windows i can't get the page open that says to connect. when i run the mouse over the icons at the bottom of the page it shows the airport signal being excellent. but i just can't get to a page to enter the "key to connect". it is greyed out and shows that it is limited or not connectivity.
please someone help!
movie lady

Have a LAN (server) - want to connect to it via airport extreme - Pls help

Need to connect to my office server via airport extreme

Sorry, but it would be nearly impossible to help without a lot more information about both your network and your company's network in order to provide you with any useful assistance.
For example:
What model is your AirPort Extreme Base Station (AEBS)?
How do you plan on connecting to your office server? VPN? Direct router-to-router connection over the Internet?
What type of Internet service is at the office?
Does the ISP provide the office router with a static or dynamic Public (WAN-side) IP address?
What is the model of the Internet router used at the office?
What service(s) do you want to access from the office server?

Why do I lose internet connection when I put airport extreme into bridge mode to correct Double NAT issue

I reset my airport extreme router the other day because I was too lazy to reset the password on my private network.
I have been reading the advice found on apple support communities and wide web, but the solutions do not solve any problems and often create new ones.
I'm regretting because everything was working just fine.
But I remember having this double nat error when I first set it up a few months back, but now I cannot resolve it.
I would live with the yellow light, but it seems that this double nat error is preventing my playstation 3 from connecting to the airport extreme.
When I put the aiport extreme into bridge mode, I loose all my wireless networks, even when I reboot the airport extreme and the modem.
I try rebooting the modem, then the airport. and vice versa. No internet.
I switch back to NAT/DCHP and the internet works fine on apple devices, but not the playstation 3, and I have the 1 Double NAT error.
I have a plain stock Motorolla modem and I can dial in and see settings (although nothing about NAT). I didn't see where to see them.
I tried setting the DHCP only but it said it didn't like the settings. is there a stock range i could be using?

I have a plain stock Motorolla modem and I can dial in and see settings (although nothing about NAT). I didn't see where to see them.
Exact model .. motorola make adsl, cable and probably wireless modems.. with some modems and some modem router.. we need exact info. What kind of broadband do you have?
I would note.. some of the motorola cable modems seem to have issues with the apple routers. If you are about due to change modems.. now is a good time.. not another motorola.
If the modem is a straight cable modem, the AE must be in router mode.. but you need to power down the cable modem. maybe for 20min so the new router can pick up the IP address.
You cannot use DHCP alone.. the ISP do not give you a block of IP addresses.
You cannot use bridge with a pure modem.. you will find it works.. but only to one device.
The only reason you get double NAT is the failure to pick up the public IP.
Give the info required..
If you have trouble, I need the actual IP of the modem. the actual IP of the AE WAN port when plugged in. Screenshots are good.

Can't connect to iDisk via AirPort Extreme

I can't connect to iDisk if I have an Extreme in my network path.
Connection that will work:
Motorola cable modem -> Netgear Hub -> iMac -> iDisk
or
Motorola cable modem -> iMac -> iDisk
Connection that doesn't work:
Motorla Cable modem -> Airport Extreme -> Netgar Hub -> Mac -> iDisk
or
Motorla Cable modem -> Airport Extreme -> iMac
or
Motorla Cable modem -> Airport Extreme -> Dell D610
Oddly enough this will work:
Motorla Cable modem -> Airport Extreme ->Dell D610 -> VPN to Work network connection -> iDisk
This problem holds through with or without WEP Security.
Software: iMac 10.4.7 and Extreme V5.7 and it is setup as a WDS base station I need to extend my network to an Express.
Any thoughts? I have not found any problem like this on these pages. (As best as I could see anyway.)
iMac Mac OS X (10.4.6)
iMac Mac OS X (10.4.6)

Looking over your original post again, I think I might have misunderstood you the first time. If I understand you correctly, your Vista laptop can see the wireless network and connect to it (so you have access to the Internet), but you cannot see the Airport Extreme Base Station when using Airport Utility.
If your Internet connectivity is not an issue and it's just that you can't see the base station in Airport Utility to configure it, try using an ethernet cable to connect your Vista laptop to one of the LAN ports and see if the base station shows up in Airport Utility then.

Basic problem with connecting to disk via Airport Extreme - No Disks Found

I've a Lacie BigDisk (500GB) which connects fine via USB or firewire directly to my Macs (HFS). When I plug it into the AirPort Extreme, the Airport Utility shows the disk as connected, and I've ticked File Sharing, with "Secure Shared Disks" set to "With base station password".
The AirPort Disk Utility is set to Automatically Discover AirPort disks and to Show AirPort Disks in the menu bar. It sees the Airport Extreme, and the action is set to "Connect with Password".
When I close the AirPort Disk Utility I can see the disk icon in the top menu bar, and clicking on this provides a menu with (greyed out) "No Disks Found", and the option to "Open Airport Disk Utility..."
Any ideas - it's driving me mad!
Thanks
Andrew

I am having the same problem with a Lacie 320 GB HD as well with my AEBS. I can't get it to stay recognized in Leopard. I have gotten it to work but only for 10 minutes then I have to unplug and start over. I know that it works fine in Tiger but I am having troubles with my drive "disappearing" with Leopard. From what I can tell others have had this problem but I am not finding a solution. Some have said going back to 7.1.1 works however my AEBS is 2 months old and the oldest firmware it has in the airport utility is 7.2. I have also found old versions on the apple website most look for an intel chipset which I do not have I am running a powerbook G4, also my friend on a new MacbookPro couldn't get them to work at all. Air disk is an amazing concept when am I going to be able to use it?

Connecting to Interenet via Airport Extreme

I have installed the AE Base station, connecting to the internet thru ethernet connection from WAN port to modem (which is connected wirelessly to my ISP).
I can connect to the internet using my MAcbook Pro running system 10.4.8 or 9 but when I try to connect using a TiPowerbook running 10.3.9 I am unable to connect.
I tried to set up a network, but when trying to connect using TiPB keep getting an error - ERROR CONNECTING TO NETWORK - when using airport to access.
I cannot see the network when connecting using airport.
Can anybody offer some advice

The ideal scenario would be if we didn't have to protect our wireless networks, but that wouldn't be too realistic in today's environment. The next best would be to use WPA or WPA2 encryption which, at present, is extremely difficult to break. Finally, as a minimum, you should use WEP.
The requirements for using WPA or WPA2 are...
Minumum Requirements for WPA
- AirPort Extreme Base Station (AEBS) w/firmware 5.5, or
- 802.11n AirPort Extreme Base Station (AEBSn) w/firmware 7.0, or
- AirPort Express Base Station (AX) w/firmware 6.1
- AirPort Extreme or AirPort clients running Mac OS X 10.3 or later
- AirPort for Mac 3.3
Minimum Requirements for WPA2
- AirPort Extreme Base Station (AEBS) w/firmware 5.7, or
- 802.11n AirPort Extreme Base Station (AEBSn) w/firmware 7.0, or
- AirPort Express Base Station (AX) w/firmware 6.3
- AirPort Extreme or AirPort clients running Mac OS X 10.3 or later
- AirPort for Mac 4.2, or
For either WPA or WPA2
- The password may be an ASCII password of 8 to 63 ASCII characters, or it may be a hexadecimal password ("Pre-Shared Key") of exactly 64 hexadecimal characters.
Your PowerBook appears to meet the requirement for at least WPA. I suggest that if you can verify that you can get Internet connectivity without wireless encryption, to try setting up for WPA on the AEBS.

Having a Nightmare!! Trying to connect Epson DX4850 via Airport Extreme

Hi All,
Just thought I'd post and ask if anyone can help me to connect my Epson DX4850 all-in-one to my Airport Extreme (n) Base Station. I downloaded the drivers today and it works perfectly when I connect it to my MBP...however, when I try to select the printer from Airport Utilities. But when I try to print it comes up with 'Communication Error'. I have tried to add the printer again the set-up guide tells me to select it then click Bonjour from the pop-up menu but I don't see that anywhere. I checked ifelix.co.uk and I don't see my printer anywhere so I was thinking that maybe the printer wasn't compatible with AX. Please help...
Thanks
RICKY.

pogrady24, Welcome to the discussion area!
Neither scanning nor FAXing is supported by the USB port on the AirPort Extreme base station (AEBS).
The AEBS's USB port only supports printing.

Slow Internet connection with IPhones using airport extreme

My Airport Extrem works fine with IPads and Mac Book but not with IPhones (very, very slow). Any advice?

Its Pretty simple if you need to change the network password on the wifi Just do a soft reset
To do this you need somethign small and skinny like a bobby pin then look at the back of the airport extreme for a tiny play button below that you stick the bobby pin in that for a full second.
Then go to your Pc go to aiport utility double-click your aiports name then go to the base station tab and you can change your password.
Having worse problems still?
Then you need a hard restart to do a hard restart (like last time) take out something small and skinny (such as a bobby pin) and look behind your airport for a tiny play button then right below that there should be a hole or a button use the bobby pin and stick it in the hole and leave it in there for 5.7 seconds then take it out and it should be rapidly blinking.
Then after it finishes blinking rapidly you need to set it up again like you did when you first got it.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Connect 3 LANs over internet via airport Extreme

I have 3 offices for my small business and would like to connect all 3 LANs for a variety of operational reasons without getting a virtual LAN from the ISP (as this is cost prohibative and we have 3 different ISPs due to geographic locations).
I have heard this is possible via Airport Extreme, but I am unable to find any documentation on the matter.
Thoughts?
Thanks
t

Also should note that at the primary location I have a Mac Mini q-Core Lion Server.

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

2 Computers Cannot Access Internet Via Airport Extreme at the same time!

I recently purchased two new computers -- a Macbook Pro (for myself) and a Macbook (for my wife). My Macbook Pro arrived first, and connected to the wireless network via Airport Extreme with no problem. Once my wife's computer arrived, and we would connect to the network with her computer, every time she accesses the network it basically "boots" my computer from the network. It still says I'm "connected" to it, but no programs/browsers/etc. that use the internet will actually work and it behaves as though there is no network connected at all. In the mean time, her Macbook continues to operate as normal and never seems to get "booted" by my Macbook Pro. Is the network thinking our two computers are the same computer? Or, what is the problem? PLEASE HELP!

I have had the same problem with my iMac and MacBook, both on leopard and with a new AEBS. With the additional symptom that internet connection will drop on either machine individually, with the other powered off. I also tried a Time Capsule, with exactly the same results. But I have observed what is described here. Internet connection is fine on one machine, then drops and I find the other machine working for awhile, until it drops. Just ping-ponging back and forth.
Since I am seeing the same problem in two new Macs with an AEBS and TC, it's hard to say that there a problem specifically with any one of them. I suspect that my problem is interference, or electrical noise when using 802.11n. The only thing that worked for me is "802.11b/g compatible" mode.
In another post, it was suggested that the AEBS was interacting with Digital cable TV/internet, potentially causing an electrical noise issue. What kind of service to you have?

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

No more internet connection to P1i via Airport Extreme?

Similar Messages

Maybe you are looking for