No More IRP Stack Locations 0x00000035

I am trying to repair a PC running Windows XP Embedded SP3. Upon boot the system BSOD's with a NO_MORE_IRP_STACK_LOCATIONS error code 0x00000035I have found that if I remove add on hardware (CD-Drive, PCI Cards) the system will boot up fine.
I have searched the TechNet database and unfortunately there is not a lot of info on this particular problem. The hot fix that is available is superseded by SP3 and the recommended registry edit has had no affect.
*Edit*
I should also mention that the system has had EWF enabled up until I started working on it. So I do not believe there have been any recent software (or hardware for that matter) changes to the system.

In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.  
If
you don't know where .DMP files are located, here's how to get to them:
1. Navigate
to the %systemroot%\Minidump folder.
2. Copy any and all
DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload
the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type
of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference between Small Memory Dumps and Kernel-Dumps
in the simplest definition is a Kernel-Dump contains much more
information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best choice. Do note that Kernel-Dumps
are much larger in
size due to containing much more info, which is why I mentioned upload speed, etc.
If
you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload
photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default
will delete .DMP files upon use.
If
your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot%
which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause
key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.
3. Windows key + Pause
key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'. 
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that
the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is
not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click
Apply. 
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

  • Windows crashes - No more IRP stack locations

    I just installed iTunes 8.0 and after having to "run as Administrator" to get iTunes to work - I then docked my 3G iPhone and within about 10 seconds, I got a windows blue screen with the message - No more IRP stack locations. I tried several things to resolve it, then discovered there was a new windows update that had not yet been installed. I installed it, rebooted the machine - started back up and was able to then dock/sync my iPhone.
    Make sure you have ALL of the Windows Vista updates installed to ensure you don't run into this problem.

    You can edit your user account to make the machine run like the old windows XP.
    Naturally this sidesteps the added security in Vista, but as I install a lot, I'll run the odd risk of infection, most of the attacks thus far anyway, were stealthy from innocent investigations so would have passed security anyway ...
    I'm new enough to Vista .... can't tell you how many times I almost put my fist through my new monitor, before I discovered I can tun this bleeding annoyance off ...
    Firefox 3 also has recently stopped on of these hijack attacks.

  • No IRP Stack Locations

    When I plug my ipod into the USB port I get an error that says I have no nor IRP stack locations. Do I have a driver problem with my Ipod?

    When I plug my ipod into the USB port I get an error that says I have no nor IRP stack locations. Do I have a driver problem with my Ipod?

  • Search more than one location at a time?

    Hello,
    I spend a lot of my time searching for files in our studio (I maintain the archives, backups, file systems, etc.) and I have to search across a number of locations (a number of local drives, specific locations/folders on various servers, etc.). Right now all our machines in the studio are on Tiger and I'm considering upgrading to 10.5, but the one major roadblock I've come across thus far is the ability to search various locations in 10.5. In 10.4 I was able to select multiple locations (local machine, specific folders on file and archive servers, etc.) all at once to find what I need. In 10.5 I've been unable to find a way to search more than one location at a time. Am I missing something, or has Apple removed the ability to search like this? This would be a serious roadblock for me as it would mean each search I do would have to be done 2-5 times, depending on what I'm looking for and where it could be found. I've even tried created a "search" folder which contains alias folders to all the places I'd normally search, but this didn't work.
    If anyone has any advice on how I could possible do this, it would be greatly appreciated!
    Regards,
    Kristin.

    Yea, I understand how to search in 10.5 (either using the magnify glass in top right, or command-F) but what I'm trying to figure out is how to search "This Mac" AND a folder on a server at the same time. In 10.4 you could just click on the places you wanted to search, but in 10.5 this option is gone. When you search "This Mac" (no matter how you customize your search), it only searches the Mac your on and mounted drives via USB and FireWire. It doesn't search other networked computers and servers and you have no option to search a specific folder on a networked computer or server unless you actually navigate to that folder and run the search (at which point you're only searching that folder and no longer also searching the "This Mac").
    You can customize a lot of things, but what feature that's lacking in the 10.5 searching is the ability to search specific/various locations across a network.
    In the studio it would be specific the computer I'm working on (a Mac Pro [not Macbook Pro]) and it's connected to 20 other Macs (G5 towers, Intel iMacs and Mac Pros) and two servers (Xserves). I only need to search specific locations on these systems, which you can't seem to do in 10.5. In fact, I haven't even found a way to search all the computers on the network, let alone specific locations on these computers on the network, all at once.
    I've been trying to figure this out all weekend (at home) via the following setup:
    - Intel iMac
    - External FireWire drive mounted on Intel iMac
    - G4 Server "connected" via Intel iMac
    In each of these locations I've placed the following folders:
    #1 - FIND THIS FILE - IMAC DESKTOP (on iMac desktop)
    #2 - FIND THIS FILE - FW HD (on external FW drive mounted to iMac)
    #3 - FIND THIS FILE - G4 DESKTOP (on G4 Server desktop connected to iMac)
    When I run the search, if I select "This Mac" it finds both folders #1 & #2, but NOT #3.
    The only way I can get the search to find #3 is to navigate via Finder to the G4 and run a search. But, now it's only searching the G4 Server and thus only find #3 and NOT #1 or #2.
    I can either search "This Mac" (and mounted drives) OR the G4 Server, but not both.
    At this point I have tried everything I can to get this to work, but nothing. I believe there is NO WAY to search various locations (especially various specific locations) across the network and that Apple has removed this ability in 10.5. I would LOVE if someone could prove me wrong!?
    Regards,
    Kristin.

  • How to use cursor data in more than one location in form?

    hi all.
    is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
    for example:
    if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
    CURSOR cur
    IS
    SELECT ID, NAME
    FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
    thanks

    kareem wrote:
    now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
    If you
    - open your cursor, fetch the data and close the cursor
    - update some data
    - open your cursor, fetch the data and close the cursor
    you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
    You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
    cheers

  • How to use cursor data in more than one location in the form?

    hi all.
    is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
    for example:
    if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
    CURSOR cur
    IS
    SELECT ID, NAME
    FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
    thanks

    kareem wrote:
    now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
    If you
    - open your cursor, fetch the data and close the cursor
    - update some data
    - open your cursor, fetch the data and close the cursor
    you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
    You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
    cheers

  • How can I save a bookmark in more than one location?

    In previous versions, I could save a bookmark in one folder, and again in another. This option seems to have disappeared with 29.0. The reference articles don't outline how to do this.
    Does anyone have a trick up their sleeve that will let us do this?
    I know that I should perhaps be using tags, but I have thousands of bookmarks filed and can't start a new procedure now with a major project launch coming up.
    Thanks!
    Allan

    hello allen, in the bookmark library you can copy and paste bookmarks into multiple locations. however as you have said, tags are probably a far more efficient way to organize your bookmarks...

  • Stream to more than 1 location at a time?

    Is it possible to stream to more than one Airport Express at a time? I'd like to be able to hear my itunes in the family room AND upstairs (and also on my office computer) so I don't have to switch locations all the time as I move through the house. Is that possible?

    As currectly designed, iTunes does not support streaming of music to more than one Airport Express at a time.
    The only workaround is to log on to your Mac under two different user names. Run iTunes under each user name, with each running copy streaming to a different Airport Express. Switch between running users with the "fast user switching" feature of the MacOS. Problem with this workaround - if you want to play the same music to both Airport Express devices, it is virtually impossible to get the sound from the two in sync.

  • More granular geo-location from the MSE?

    I have a WCS 7.0.xx and a MSE 7.0.xx installed and working fine.
    I have managed to get an geo-location answer from the MSE, but it  appears like it has low accuracy. Eg: 63:24:59N 10:24:9E. As far as I  can see, It contains only degrees, minutes and seconds, not decimal  seconds. If I remember correctly a second equals to about 30 meters in  north/south direction (and from about the same to 0 in east/west  depending on where it is placed between equator and the north/south  pole).
    Is it possible to increase the number of decimals, so it does not lose more accuracy than it needs?

    enduser wrote:
    Hmm.. `gpspipe` gives me:
    gpspipe: could not connect to gpsd localhost:2947, Unknown error -6(-6)
    And `gpsd` gives me:
    gpsd:ERROR: can't run with neither control socket nor devices
    Do I need to be root for these applications? Alternatively, could I maybe just grab the timezone from /etc/localtime and use that? (though I guess that doesn't get close enough on longitude...)
    You have to start gpsd from systemctl.  And you can plug/unplug gps devices at will, so it can be enabled in systemctl whether or not an actual gps is always available.

  • Unable to log into to more than 2 locations

    I have to OCR a tonne of documents so purchasesd 3 subscription plans in order to run the batch processes on three workstations - yet I am now unable to log into the Cloud to fire up my Adobe Acrobat on the third workstation due to "having been logged into 2 other locations"...sooooo, I purchased three plans - how do I now use what I paid for?
    regards

    Hi JeffF,
    Welcome to Adobe Forum,
    Please cancel two subscriptions & buy either three CC witrh three different Email ID or buy CC for Team in which you can assign seats to three users.
    This is because one Adobe ID allows you to activate the CC only twice.
    Regards,
    Rajshree

  • More iTunes Library Locations?

    I'm new to iTunes, and am using 9.0.2 (25). Under Preferences > Advanced, there's a checkbox which states, "Copy files to iTunes Media folder when adding to Library". Does this mean there are iTunes Libraries placed elsewhere than only in the Music > iTunes > iTunes Media folder? If so, where are the other places iTunes keeps Library contents?
    Also, when I run Activity Monitor, while running iTunes, there's another program running, named, 'AppleMobileDevic'. I don't connect my computer to an iPod, or a phone, so is there a way to stop 'AppleMobileDevic' from running each time iTunes is activated? Thanks.

    My concern is that the phrase, 'Copy files...,' gives one the impression that the files are in at least two places – their original location, and then also, the location they are copied to.
    That is correct.
    If you haveiTunes prefs Advanced "Copy files..." ticked, after you add it to iTunes, you can delete it from the original location.
    it would still imply that iTunes is retaining a copy of Library entries. If that is so, then where within iTunes are they kept?
    They are in iTunes media folder location shown in iTunes prefs - Advanced. The default location is \Music\iTunes\iTunes music\ (or \Music\iTunes\iTunes media\ in iTunes 9).

  • More than one location for the same library?

    My library is on an external drive which is almost full. Is it possible to just extend and continue the same library to additional drives? How do I specify multiple locations for the same library?

    To add to Roddy's post I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
    This lets me edit several sites and only republish the one I want.
    OT

  • Stack file that is generated does not contain any java components

    We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
    Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
    ++++
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: EA4
    Hostname...........: wipro
    Install directory..: e:/usr/sap/EA4
    Upgrade directory..: F:\EHPI\java
    Database...........: Oracle
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    ++++++
    PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jun 28, 2010 9:21:23 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jun 28, 2010 9:21:23 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jun 28, 2010 9:21:24 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jun 28, 2010 9:21:24 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jun 28, 2010 9:21:24 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
    Jun 28, 2010 9:21:24 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
    Jun 28, 2010 9:21:24 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    ++++++++++++++++++++++
    [stack xml data: version=1.0]
    [SPAM_CVERS]
    ST-PI                         2005_1_7000006
    LSOFE                         600       0015
    SAP_AP                        700       0015
    SAP_BASIS                     701       0003
    SAP_ABA                       701       0003
    SAP_BW                        701       0003
    PI_BASIS                      701       0003
    PLMWUI                        700       0002
    SAP_APPL                      604       0002
    EA-APPL                       604       0002
    SAP_BS_FND                    701       0002
    EA-IPPE                       404       0002
    WEBCUIF                       700       0002
    INSURANCE                     604       0002
    FI-CA                         604       0002
    ERECRUIT                      604       0002
    ECC-DIMP                      604       0002
    EA-DFPS                       604       0002
    IS-UT                         604       0002
    IS-H                          604       0003
    EA-RETAIL                     604       0002
    EA-FINSERV                    604       0002
    IS-OIL                        604       0002
    IS-PRA                        604       0002
    IS-M                          604       0002
    SEM-BW                        604       0002
    FINBASIS                      604       0002
    FI-CAX                        604       0002
    EA-GLTRADE                    604       0002
    IS-CWM                        604       0002
    EA-PS                         604       0002
    IS-PS-CA                      604       0002
    EA-HR                         604       0005
    SAP_HR                        604       0005
    ECC-SE                        604       0002
    [PRDVERS]                                  
    01200314690900000432SAP ERP ENHANCE PACKAGE       EHP2 FOR SAP ERP 6.0          sap.com                       EHP2 FOR SAP ERP 6.0                                                    -00000000000000
    01200314690900000463SAP ERP ENHANCE PACKAGE       EHP4 FOR SAP ERP 6.0          sap.com                       EHP4 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900001296                                                            sap.com                                                                                +00000000000000
    01200615320900001469SAP ERP ENHANCE PACKAGE       EHP3 FOR SAP ERP 6.0          sap.com                       EHP3 FOR SAP ERP 6.0                                                    -00000000000000
    01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01                                           +00000000000000
    [SWFEATURE]                                                                               
    1                   01200615320900001296SAP ERP                       2005                          sap.com                       SAP ERP 6.0: SAP ECC Server
    19                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
    20                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Media
    21                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
    23                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
    24                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
    25                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
    26                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
    30                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
    31                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
    33                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
    37                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
    38                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
    42                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
    43                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
    44                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
    45                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
    46                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
    47                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
    48                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
    55                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
    56                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
    59                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
    69                  01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
    9                   01200615320900003195EHP4 FOR SAP ERP 6.0_NW701    EHP4 FOR ERP 6.0_NW701        sap.com                       EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
    ++++++++++++++++

    Though we have configured Java in solution manager the stack file that is generated does not contain any java components
    You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
    Nelis

  • EHP4 Upgrade ABAP+JAVA stack

    Hi SDN Team,
    We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
    Trouble Ticket Log
    ===============
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: SE1
    Hostname...........: NA00SAPSAND02
    Install directory..: g:/usr/sap/SE1
    Upgrade directory..: G:\EHPI\EHPI\java
    Database...........: Microsoft SQL Server
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    We have added the system  in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
    PREPARE_JSPM_QUEUE_CSZ_02
    ===========================
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
    Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
    Jul 27, 2010 3:48:22 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    Not sure what to do now.please advise.
    Regards
    Uday

    Hi Uday,
    > Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
    > Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
    > Jul 27, 2010 3:48:22 AM [Info]:                      >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
    > Jul 27, 2010 3:48:22 AM [Error]:                       >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
    > Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
    I can see in the log that stack xml you are using is not for the system to whom  you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
    I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
    Thanks
    Sunny

  • Question about Toshiba Bluetooth stack V.4

    Hi
    We have a Fujitsu Siemens P7120 Laptop which requires the Toshiba Bluetooth stack located at http://aps.toshiba-tro.de/Bluetooth/pages/download.php
    When we install this in silent mode, the installation takes place however the Bluetooth does not initialise until the Toshiba Bluetooth information exchanger is launched!
    Is there anyway to make the whole installation complete without this other step?

    You should use the BT-stack of FSC. I also tried to install an OEM version of the Toshiba BT-stack, but in this case it was time limited. So check the "About" menu item to get get more details.

Maybe you are looking for

  • After SN install can't launch Disk Utility from external drive

    I recently upgraded 10.5.9 to SN on my white Macbook. First I used Carbon Copy Cloner to clone the old drive onto the replacement drive in an external enclosure. Then I swapped drives so that the new drive is now the internal drive and the old drive

  • Which Replacement drive for Macbook 2.0 intel core 2 duo?

    One of my favorite Apple laptops in many years had been the early Macbook 2.0. The thing has a nice 13" screen, seems to be a very solid build, and it's worked well since the day I bought it back in June of 2006. I also have a MBPro 17" and a newer M

  • Unexpected namespace change after mapping change

    Unexpected namespace change after mapping change Posted: Apr 18, 2006 5:17 AM    Reply  Hi all We developped a mapping about one year ago on XI SP9. The source of the message was an Idoc and the target an XML sample (and not a xsd!) of what our custo

  • Geturl not working of ferris wheel effect

    Hi, Thanks to Rob i have managed to get the effect i want and he has kindly given me the code to add a geturl to each of the images on the ferris wheel effect. The only thing is that when i view it it does not work so maybe i am missing somthing, see

  • Error when starting messaging service

    I have a customer that is trying to send order confirmations and is having no luck.  He has tried a outside SMTP server and the local pickup.  I went to make sure the messaging service was started and when I tried to start it I got the following erro