No More K8N Neo Platinum Nforce 3 754Socket Updates??

I just checked the site for new bios and for my suprise its just gone, it just not there ???

K8N Neo Platinum is placed under "archive", since they don´t make it any longer.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=17&NAME=Archives
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=572
New bios updates probably will be rare since it´s a mature board by now, unless there are some obvious reason for it like new 754 cpu model etc.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=572&kind=1

Similar Messages

K8n neo Platinum and Optical Drive problem?

I need some help figuring this out. I've been searching for awhile but can't find any more information so I figured I'd ask here.
I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
The problem is on the 411S where it will read the DVD/CD disk but when I try to use Cyberlink PowerDVD or Nero Recode to play or read the DVD it will just hang. If I don't try to play these files and just open them in explorer then I can access them.
I'm trying to see if there are some conflict issues with the nforce drivers but am still looking.
My setup is this.
AMD 64 3000+
K8n Neo Platinum nforce 3 250 Bios 1.4
Western Digital 120 gb hd
PQI 3200 1 gig memory
PNY 6800 GT
Audigy 2
Antec Trupower 420
Any help would be great as I'm totally stuck. Thanks.
Also to note I can play DVDs and use recode fine off the DVD rom drive but just not off the DVD writer (411s).

Quote
Originally posted by BluddSimple
I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
You might have better luck making the reader the slave on the channel your HD is on. I had both a burner/writer on the same channel and while it worked, the performance was very poor.
Man, I need to get around to posting my specs someday, but I have the same MB and BIOS as you. I'm also using the nForce unified drivers including IDE.

K8N NEO PLATINUM Nvidia nforce 3 250 GB Chipset rebooting - hanging !@$%@#$@

Hi folks,
I am working on the K8N NEO platinum motherboard based on the Nvidia nforce 3 250 GB Chipset.
A couple of days ago I lost my internet connection (broadband). After a couple of minutes it ok again. But suddenly the computer frooze.
After rebooting (button on case) I found out that lots of things couldn't be closed anymore once they were opened. I needed to use CTRL-ALT-DEL to go the the active Tasks. But then that started to freeze too so I decided to wipe everything of the system.
I repartioned and reformated the computer with the win XP PRO CD and reinstalled the OS. I saw immediatly that the system was slower then before and that it did not found the internet connection anymore. I checked the LAN connection and there it sayed that the LAN card was working well but that no cables were connected. This was not true because I dubbel checked them twice. I even replace the cable. It was not my Internet provider neighter because the computer is in a local network and others had no problem to access the internet. So I decided to reinstall and reinstall it again. I reinstalled the system (partioning, formatting) it 4 times. The last time suddenly it found my connection back. Then I installed all updates of windows and I used my live update from MSI to update my components.
I am using live update 3 and updated the BIOS and all other parts who needed to be updated. This was done without the presence of a AV and so on. Everything went well and no errors occured. I received everytime a message with success.
Today my computer suddenly hanged itself again. This already 3 times. Nothing is possible anymore except the boot button on the case.
I also encountered 3 times the while surfing the computer suddenly reboots itself without any warning or message.
What the hell is going wrong here ???
Can aynone give me a clue please ?
Is the motherboard dying ?
MSI live bios Version 3.7.000
MS-7030(K8N Neo Series / K8N Neo platinum)
BIOS version 1.7 (latest version)
Award bios release
2005/05/10

Charly.P
Russ_xp was asking about the Max amps on your power supply should be on label like this:-
Need yours - 3.3v= ??A.5v=??A,12v=??A
luck

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

K8N Neo Platinum hangs at "Initializing Keyboard Controller" step in POST

Hi Folks,
Here is my system:
MSI K8N Neo Platinum (New in box) (no clue on bios version, as I can't access it yet)
Athlon 64 3200+ 2200Mhz, 640Kb Cache
Thermaltake CL-P0025 Silent Tower CPU Cooler (VERY careful installing this)
2x512MB Mushkin 991460 EM3200 400Mhz DDR (
ATI AIW Pro X800XT (AGP)
OCZ ModStream 450W PS (3.3/28A, 5/45A, 12/26A, 220W/312W)
WD 74GB Raptor
Plextor 712A DVD/CD (SATA)
Here is my dilema: box powers up, POST stops at "Initializing Keyboard Controller". ( I know this because the little lights on the D-bracket tell me so.....:-) I have been on these forums as well as AMD's forums all day now, and have tried everything suggested, except swapping PS. But I think I have an adequate model.
One by one, I have disconnected any sources of possible problems. I have reset my bios too many times to count. I have isolated the MB outside of the case. I have re-seated everything numerous times. I changed Bios battery. I've swapped RAM, and it's positions. Even took it all off. I even bought another K8N from Ebay, and have the exact same results. At no time has the status lights displayed anything different, except for a quick change in color of light number 3 when I do a front-panel reset. Right now I have nothing but the processor on the board and I still have the same result; POST hanging at "Initializing keyboard controller". I have swapped keyboards unplugged the keyboard.
I am leaning toward the processor now. What am I missing? Should I just do an RMA and be done with it?
Suggestions encouraged......
James

Quote from: sincity337 on 04-August-05, 12:22:07
Bowen,
I've got an old Asus P2B that still runs like a champ, although slow by todays standards. You are right about it being rock solid, I have never had a problem with it, not one. As a matter of fact I still have it and I use it for my "linux box". Oops, a little off topic.
Anyway, it looks like MSI received the board today. I will start the stopwatch and see how long it takes to get a replacement board. I'll keep you guys posted.
James
Yeah those boards were the best I've seen. The Intel 865 chipsets are pretty good too. My previous 845 based mobo was nice as well. In the past, using VIA boards have been hit and miss with me. The K8T800/Pro and K8T900/Pro seem to be very stable though...still I would get an nForce 4 chipset over the newest VIA boards.
This is OT but I just received my shiny new BFG GeForce 7800 GTX OC card a few days ago and I was very surprised at it's performance. I was using a crappy Radeon X300 because I needed a temp card until I could buy either a 7800 GTX or the upcoming Radeon X900 XT. My last system I had a Radeon 9800 Pro and it ran flawlessly. I only had one problem with that card and it was driver related to only one game. The game was Call of Duty and that issue was resolved by going down to an older driver, but then ATi corrected the problem with a new driver release. Anyway as fast as the 7800 GTX is, I hated it! The reason is that despite it's awesome speed; the only way I can put it, is that it doesn't run games as smooth as Radeon's do. It was especially bad with Battlefield 2. This is ironic because BF2 is supposed to be optimized for nVidia cards.
It has a bad stuttering problem with BF2 and allot of people have this issue. Some have this problem with ATi cards but most are nVidia users. Even when I set the quality down to the same settings as my 9800P was at, it did the same thing. Other games like Counter-Strike: Source ran fine unless you had bots. Heh, even my slow X300 ran games more smoothly (not faster and at a much lower resolution and quality setting but still smoother) than the 7800 GTX. I sent the card back and I'm getting a full refund. I'm waiting on ATi to release their X900 XT and I'll buy that. What's strange is that prior to buying my 9800P two years ago, I had only used nVidia cards since the TnT2. Well times have changed I guess. Oh well, I guess I had to learn the hard way, but at least this way I know I'm getting the right card!

Memory Corruption on K8N Neo Platinum - HELP!

I am having some problems with my cousin’s computer that I built for her last September. She brought me the computer because she got an error that the system32/config/system file was corrupted and couldn’t boot the computer. I got the file replaced and got the computer re-updated to where it worked. Then the same thing happened again. This time I did a Windows reinstall and the computer acted a little sluggish and iffy so I did a memory test. I found the memory was all corrupted.
First here are the pc specs:
MSI K8N Neo Platinum with 1.7 bios
Athlon 64 3000+
120GB Seagate SATA hard drive
NEC DVD Burner and Samsung DVD ROM
Radeon 9550
512MB Corsair Value Select 2.5CL DDR400
Antec 350W psu and Antec Case
I ran Memtest86+ v1.6 and the Corsair stick had errors in Test 3, 4, 5, and 7. In tests 3 and 4 there are 50 errors but at the 98% of Test 5, the errors jumped to 146,432 and they were 500.8MB part of the stick. I got the same results when I moved it to DIMM2 slot. I also get the same results when the HT is at 1x or 4x.
I tried a known working 512MB stick from my sisters Athlon XP 2500+ pc in the A64 pc. It is a Mushkin PC3200 Basic stick. I get errors only at 98% of Test 5 which amounts to 109,568 errors. Same results in DIMM2 slot.
But when I test the Mushkin in my sisters pc, it has no errors. But the Corsair stick in the AXP pc gets errors on Tests 1, 3, 4, 5 (only at the 98% mark), 6, 7, 8 but only a total of 317 (a lot less than 146,000 in the A64 pc.)
So, I know the Corsair memory is bad, but now something is also wrong with the motherboard and /or cpu right?
If you need any more info let me know. I’m new to the forums and they look very helpful.
Thanks.

Quote from: blazing storm on 23-August-05, 05:30:00
Look in the bios and loosen up the RAM settings. Make sure the RAM isn't being stressed into settings that are too hard for it to handle.
See I told you to loosen it up...
I speak from experience as the same happened to me and loosening settings stopped errors.
Glad you managed it, well done...

"error loading operating system MSI K8n Neo platinum

OK,
System will post, according to MSI Website I have the latest Bios version.
I can boot from CD.
The only odd item is that I am using the HD that I took out of my old computer with windows already on it.
Tried re-installing windows XP. It went through the loading process and then rebooted. Same error message appears.
Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
Video is Asus V9980 ultra GeForce FX 5950.
MSI K8N Neo Platinum
AMD 64 3400
Hercules 600 W PSU
WD 80gb HD
Generic CD-Rom
Sony Cd-RW
2 x 512 crucial 400 ddram slosts 1 and 2
Asus V9980 ultra GeForce FX 5950 256 TVD
Do I need to clear bios and re-start?
HD is on it's own cable in IDE 1
Cds on IDE 2 shared.
let me know what you think.
The other related posts I read, people were using raid or multiple OS. I'm not.

I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
I think most of the problems people are having are actually more ram related than anything else.
So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
Take care,
Bob

K8N Neo Platinum keeps shutting down

I have just built a new system with a K8N Neo Platinum, Athlon 64 3400+ with retail heatsink and fan, 1GB of Corsair TWINX1024-3200C2 DDR400 memory, eVGA GeForce 6800 GT, two 80 GB Maxtor SATA drives in an Antec Sonata case with its TruePower380 watt PS, and my existing NEC 2500 DVD-RW and a DVD-ROM drive and floppy. The system keeps shutting down before I can get WindowsXP installed. It seems to be a heat issue, since its runs the longest after a lengthy shut down, but the bios hardware monitor shows the system temp stable at 33 and the CPU temp at 39.
If I let it idle, it continues to run, but it frequently shuts down when I put a load on it, such as saving the bios configuration or starting Windows during XP setup. I have been able to get XP installed once and started to install the Nforce drivers, but it shut down in the middle of this. Windows files seem to be corrupted frequently. It seems to be somewhat better after I pulled the Athlon heat sink and reapplied a thinner layer of Arctic Silver II. I note that the heatsink does not attach as tightly as the one on my Athlon 1800+. The heatsink fins always seem to be cool to the touch. I notice that the machine usually (but not always) shuts down on a keystroke. I am using a PS/2 keyboard since my USB keyboard doesn’t seem to work.
I understand this motherboard has some issues with temperature sensing, and I would like to get XP installed so I can flash to a later bios and try some moderate overclocking.
I am considering going to an aftermarket CPU cooler, installing a larger power supply, or replacing the MB. I am also considering switching the RAID configuration on the SATA drives from 0 (striping) to 1 (mirrored) or just turning off the RAID function until I get this fixed. Any help would be greatly appreciated.
Trickster2

Thanks for the suggestion. The Antec 380 has 18 amps on the 12 volt rail, 35 on the +5 and 28 on the +3.3, and I have seen numerous posts of people successfully using this PS for this MB. I have tried reducing the power demand by switching to an old PCI video card, an old stick of 256MB memory, unplugging the optical drives, floppy and case fans, but the machine still shuts down just as quickly.
I finally got XP installed, but haven't been able to update the BIOS yet.
Is there anyway to know whether it's the CPU, the PS or something else causing the shut down?

MSI K8n Neo Platinum

Hi Guys,
I am having a problem with my computer at the moment. I am having trouble getting into the BIOS of this motherboard (MSI K8N Neo Platinum). When I try to get into BIOS, it goes into a black screen with a little line on top of it and its blinking. This has never happened before. Then when I shut off my computer since I couldn't get into the bios, I turned it back on and it goes on but nothing goes to screen or it wont boot up to startup screen. Then I turn it off, I reset the BIOS and turn it back on. Now it boots up to the startup screen, but when it says press del to get into bios, I pressed that and it happens again, it will not get into bios. When I do this over again by resetting the bios, this time without getting into BIOS, it goes on and boots up to Windows XP. I want to reformat my hard drive with a fresh copy of XP Pro, but I can't get into BIOS to do that. Can someone help me?

Same thing happened to me today. Thanks MSI for publishing a Betaversion of a BIOSupgrade on the Live update..
At first I figured that there must have been some fault during the BIOSflash so I downloaded the file again and repeated procedure. This time it worked like a charm and I could do all my BIOS-settings. The next restart the problem was back again though, and this time I had swapped the order for my SATA-drives to boot (to the way they should) but the system couldn't boot. So I couldn't enter neither the bios or Windows. Luckily you can shift the primary boot device by pressing F11 though, so I got out of the libido...
Now I've downloaded the old 1.9 Version instead and I sure as h*** won't do any more beta-testing for MSI by using the Live Update anymore!

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

K8N Neo Platinum issue, computer does not boot..

Hello,
I’m going to try to be as thorough as possible here… :D
Recently I reinstalled Windows Xp (32-bit version) on my computer to speed things up again like it used to be. I did an updated on the BIOS while I was at it as well, through the Live Update tool downloaded from the msi.com.tw website. The install went well, no errors. The next day while playing WoW the computer began acting weird and computer froze during gameplay. After that the computer had artefacts, strange disturbance on the screen making it impossible to see anything on the screen. So I thought that maybe since the screen looked all messed up it was definitely the graphics card that was about to die and so I sent the gfx to the retailer and they checked it thoroughly for errors without finding any, while they were at it they also checked my RAM and they also came out clean.
A few days ago when my Gfx and RAM came back I inserted them back onto the mobo and when turning on the powerswitch nothing happened… I therefore tried to solve the problem myself and began reinserting all the computer parts piece after piece and well the computer started at least with the fans going and all but after a few seconds it shuts down again.
When I plug in the power cable the PSU makes a clicking sound, don’t know if that’s normal but haven’t noticed it before.
To maybe help you guys when helping me I installed the d-bracket (the usb thingy with 4 led’s ^^) which shows 4 red lights when starting the computer and lasts until the computer shuts down. According to the d-bracket FAQ it means: “- The D-LED will hang here if the processor is damaged or not installed properly or you have a weak Power Supply Unit.”
Well I reinstalled the cpu, put on new thermal grease so I don’t think that is the problem and the computer has been working fine for more than one year until now... How do I know if it’s the PSU or if the cpu is damaged? Could the motherboard been damaged after Live update’s flash? And what could have caused the artefacts on my screen the other day? Errors with the newest nVidia gfx drivers? I’m very confused :S
What should I do?
Thank you for your help!
Computer specs:
Amd 64 3400+ with Zalman cpu fan(can’t remember which one, one with only Cu heatsink + fanmate)
1 GB (2x512MB) Corsair 3200
1x 74GB Western Digital Raptor 10k RPM S-ATA + 1x 200GB P-ATA Maxtor
Gainward nVidia 6800GT Golden Sample 256 MB
MSI K8N Neo Platinum Nforce3 250GB
Antec True 380SP, 380W (came with my enclosure Antec Sonata I, www.antec.com)

Hi again..
I've now received a new PSU from Antecs RMA department. A TruePower 2.0 380W. My computer still doesn't work. 4 Red LED's when trying to boot it up. But I have noticed one thing since last time I wrote here. Remember what I was saying that I upgraded my BIOS through LiveUpdate? When I later checked my motherboard I noticed the CMOS pins around JBAT1(I think) was incorrectly placed. Instead of having them on either 1,2(to keep settings) or 1,3(to clear CMOS) they were placed right next to the JBAT1 pins, on something that wasn't named or explained in my manual. Maybe that is the reason my computer is acting strange? I mean the BIOS could maybe not have properly been saved or something. :/
I'm too inexperienced to know if that had anything to do with my recent computer isssues, but maybe you guys know. Would that screwup by me be covered by my warranty?
If that pins-placed-wrong-on-the-mobo problem doesn't have anything to do with my problem that leaves me with the 4 LEDs from the D-bracket showing a broken CPU or PSU(it's brand new, shouldn't be any problem with it!). So a damaged CPU it is.
Anyone of you got an idea? Been away from my computer for too long. This is getting annoying.
Thanks.
/Christopher

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

Msi k8n neo platinum ps2 keyboard problem

Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
Like many others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work

MSI K8N Neo Platinum Nforce3 250GB - PSU?

My sister in law have this board, MSI K8N Neo Platinum nforce3 250gb chipset, recently the power supply sounds noisy and a high frequency sound from the Antec Truepower 380W SP. Had maked an RMA to Antec and they had agreed to replace the 380W psu with SmartPower2.0 450W. But they asked me one question, that im not sure about:
"Make sure that your motherboard does not need the -5V. If you want more information on the power supply you can look at this link: http://www.antec.com/us/productDetails.php?ProdID=26450 "
So, do Antecs SmartPower 2.0 450W suits this board and what really is -5V for? As I read the manual, it said ATX 20 pin power connector: JWR1 and at pin 18: -5V
So does it mean this board need a psu that gives -5V on ATX 20 pin power connector and thos board can't use with Antecs SP 2.0 450W?

Quote from: syar2003 on 22-February-06, 05:10:37
Hi!
The K8N Neo Platinum (MS-7030) doesn't use -5v to anything.
So the -5v from the old atx spesification is not needed in your case.
WoW, thanks for fast reply!
So, it won't be any problem to use Antecs SmartPower 2.0 450W with this board then? Want to make sure about it, before accept Antecs offer for replacement and had spent over 4 days to find the problem with his computer. Really don't want to do it again.
This is his riggs:
Antec Sonata
AMD 64 3000+ S754
Corsair Value S. PC3200 DDR 512MB
Maxtor Diamondmax 9 250GB SATA
Maxtor Diamondmax 9 IDE 160GB
Sapphire Radeon 9550 Atlantis 128MB DDR
and
Accton ethernet card on PCI slot
MSI D-Bracket2
so
With the "new" Antec SmartPower 2.0 450W
Any problem with this rigg and PSU?
edit:
Dound this post that it said the board do need -5V and now Im confused?
http://www.archivaty.net/forums/about12964-30.html

K8n neo platinum, RAID configuration and linux

Hi all, please be gentile to me becouse I dont understand much about technical issues of computers...
Here is my problem: I am using windows XP but today I decided install Suse Linux 10.0 32bits version also, but a warning came out saying something about I have RAID by software and if I install linux the data of the discs will be erased. I have a SATA2 80GB hitachi drive with Windows XP installed and a 2 partitioned drive 120 GB samsung sp1203n (IDE) with data in one partition and an empty one that I want do install linux in it. Can someone tell me how can I configure a RAID without losing any data so I can install Linux? I hardly know what a RAID is... lol
Thanks in advance...
Here is my machine specification:
AMD Athlon 64 2800+
MSI K8N Neo platinum
HP DVD 200I
Philips DVD writer
Hitachi Deskstar 80GB SATA2
Samsung SP1203N 120GB IDE
Radeon 9600XT
2*Kingston 512 3200 cl3
Revoltec power supply with 25Amps in 12v rail

Quote from: kakarocht on 28-October-06, 13:05:36
Does your RAID shown you HEALTHY?
The Raptor drive shows as healthy.
Quote
You may need to press F6 (using the NVIDIA raid driver for Win64 if you're using the RAID). As Win32 and Win 64 using different drivers.
This has crossed my mind and is definitely on my list of things to try if all else fails.
Quote
Have you enable the RAID Array as Bootable Drive in the Bios?
All RAID options are enabled. I didn't touch the BIOS prior to starting the process. The RAID array wasn't listed in the BIOS as a bootable device. In fact, it wasn't listed at all. It was after I discovered this I used F10 to see if it was detected there. The drive was listed, but it wasn't bootable. I then made it bootable. After exiting this section, the PC booted straight into Windows. On the occasions when Windows started, I didn't go into the BIOS to see what it shows.
Quote
But why you need to used the NFORCE3 instead of Nforce4 Drivers from the NVIDIA website?
Because it's an nForce 3 board. Or are you saying the nForce 4 should work fine?
Quote
Gd luck.
Thanks.

No More K8N Neo Platinum Nforce 3 754Socket Updates??

Similar Messages

Maybe you are looking for