No more possible to connects one Linksys 54GL to another linksys 54GL

I bought two Linksys 54GL at the same time last year. I configures as following: one linksys (A) was to choose PPPoE with user name and password provided by my ISP, The Internet port of the second linksys 54GL (B) was conntected to any one LAN port of router A, and Internet connection type was to choose Automatic configuration DHCP. It works well in this manner f for both wired and wireless connection for both router.
Suddently, the router B did work no more. I had no more wired and wireless Internt connection for router B. But router A still works well for both wired and wireless Internet connection. But I could login to router B with 192.168.1.1 and I had wireless signal(no Internet connection).
In order to test if the router B is dead, I reconfigured router B as Router A , directly to my ISP with username and password and PPPoE, connected directly to my DSL modem, and it worked well for wired and wireless connection.
Finally, I reconfigure router B to its original: Automatic Configuration DHCP as I did at the beginning. It is strange: still no more Internet connection for router B (both wired and wireless) but we can access the router Band had its wireless signal.
I understand no more why I had this strange problem. Both router use firmfare 4.30.14

About your first router it can be resolved by a firmware upgrade .You have to configure the second router manually.

Similar Messages

Is it possible to connect one OIP to another OIP?

I have 2 Oracle Instant Portals setup and I need to be able to go back and fore between them. Is it possible to connect one OIP to another OIP?
Background Information - One of the OIP is our company Intranet and the other one contains all Executive level reports. I will like to have the ability for an executive manager to login to the Intrant OIP and then a link to the Executive OIP.
Any instructions or information would be help me a lot! Thanks in advance!

use a line like:
private com.sun.tools.javac.Main javac = new com.sun.tools.javac.Main();
and run javac.compile() on your code. you write a file that is name.java using fileIO right? then compile it and run it!
here is a good tutorial:
http://www.javaworld.com/javatips/jw-javatip131.html?#

Is it possible to play one music video after another in itunes/front row?

Hi all. Can anyone help me with this problem? When I use the movie part of front row to watch and listen to music vids I have front row goes back to the movie menu after each video has ended. Is it at all possible to watch one video after another without having to scroll down to the next music video after each music video has finished playing? Not sure if im being incredibly dense but any help would be greatly appreciated. I have Apple Care and they have no idea what im on about!
Thanks Rob

I've been doing some experimenting on this. I made a smart playlist in iTunes to gather all my music videos (which I have previously tagged with 'VIDEO' in the comment field).
In Frontrow, iTunes will not play the video at all- it just shows a single frame and plays the audio; in Movies, music videos, it will play one music video correctly, but then go back to the music video menu. This seems to be a known problem.
My solution is to go back to the desktop and use iTunes in the old fashioned way! Selecting my new VIDEO smart playlist will play all my music videos in any order I like using the normal parameters i.e. random, alphabetical by artist, album, name etc..
Hope this helps.

Is it possible to make one icon big and another icon small on my desktop?

Some icons on my desktop get really annoying. I don't want to move them but I still want one of them to be really big. Is there a way that I can keep them all on there only have one icon bigger than another.

I can add a 3rd partition. Would you post a screen shot of it telling you you can only have 2 partitions so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

How do I connect one iMac to to another iMac

What cable do I need to purchase to connect my current iMac to my old iMac and use the old iMac as a second screen?

Any iMac ever made does not have the ability to do this
Apparently not quite correct:
Using a 27-inch iMac (Late 2009 or Mid 2010) as an external display
beccarock8 I don't know if it will work but if you connect your old machine to your new one and use a mini-displayport cable and launch your old machine in target display mode as directed by that apple doc I linked to ti may work...or not. The wild card here is the thunderbolt to mini displayport. Certainly the TB connection can be used to connect to a mini-displayport display. The question is does the old computer look like a display to the new machine?
Note I said use the older machine in target display mode. The reverse definitely won't work since a TB device cannot be connected to a mini-displayport source.
Confusing Mini DisplayPort with Thunderbolt

Is it possible to call one mathscript function from another?

HI iam bahrath..i need call the operation takin place in one mathscript in another..is it possible?pls help..

Thanks for your concern..let me explain my project.Iam actually developing a system which provides the stress strain relationship of a material..For calculating strain which is nonlinear in this case we are using image processing techniques.We take a picture of the system initially with light markers and we find the centroid of all the markers(i use four of them).After the force is applied on the particle the centroid of the markers change as the marker positions change.I use this change in the centroid and calculate the strain.Now, 90% of the code is ready in matlab(jus capturing image and usin is needed).But i have been asked to implement it in labview.so iam tryin to put the code in mathscript and try.But the problem i face is incompatibility of many functions like imshow,input etc.so im implementin parts of the code inlabview mwthod and rest in mathscript.In matlab code i have two files and call the function in in another file from one file..thus i thought i might use two mathscripts and call one from the other..pls help.

Itz possible to call one report program into another program

hi guys,
i had a doubt that can i call a report program into another report program by declaring their name into the second program like as we calling Includes ,function modules and like class and their methods .
if anybody done this or know how to do this, give me the details and explination about this friends
if it possible with screenshots and codings
Thanks & Regards
Saigijeo

Please search before posting, do not ask basic questions here.
Always do your own work before turning to the community with specific problems.
Thread locked.
Thomas
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]

Is it possible to have one while loop in another while loop

Is it?

Well, actually there are several possibilities:
1. You right click the orange square where the double value gets out of the loop and select "enable indexing". This results in an array of all values you get while this inner loop is running.
2. You add a shift register to the outermost loop and use the "build array" function after the inner while loop. This results in an array of the last value after the inner while loop has stopped.
3. You combine both ways described above. Then you get a 2D-array.
You can see this in the attached vi. In every case you have to be aware of what happens with the memory. In case 2 and 3 the array grows steadily. This could leed to problems, so you have to take care to empty it, if possible.
Now it depends on what kind of data you need.
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
BuildArray.vi ‏16 KB

How to connect one XI to another XI

Hi all,
I want to connect one XI system to another XI, the scenario is :
systems: R3_A, XI_A, R3_B, XI_B
now, R3_A connect to XI_A; R3_B connect to XI_B;
my client want to exchange data btw R3_A and R3_B, but they dont want to using direct connection using RFC or IDOC.
they want to use those flow: R3_A -> XI_A->XI_B--->R3_B;
the data send from R3_A forward to two ways by XI_A, one is to an external system, another is to XI_B, so i want to use BPM to split the message.
i dont know how to connect XI_A to XI_B.
ple help me.
Thanks.

Did you searched SDN with the term "XI to XI"??
Re: PI to PI integration?
Re: Xi-to-Xi-scenario
If you make a search you will find lot many threads....
Regards,
Abhishek.

Replace one preset effect with another

Is it possible to replace one preset effect with another withouth having to undo a prior preset effect?
When I used Aperture, holding down the Option key would allow me to replace one preset with another.

Store > Sign Out
Store > Sign In
All purchases remain tied to the account used to buy them, but you can authorize iTunes to multiple accounts and put protected content from up to five on your devices. Generally best to stick to one account if possible. More so once you get to iOS devices as managing app updates over multiple devices is a chore.
tt2

Scheduling one background job inside another

Hi All,
Is it possible to Scheduling one background job inside another.? i.e In my Z program I am calling job_open, job_submit, job_close and to execute one standard report in background. And after that I am executing my Z program itself from SE38 as Program->Execute->Background->Execute Immediately. Is this logically correct? I am asking this because I am not getting the desired result
Thanks & Regards,
Neethu.

HI,
Check the job steps in SM36.
First schedule the Standard job and in the job steps schedule the z report.
Schedule job in chain

Managed Metadata values scrambled when copying or moving documents from one Site collection to another.

Hi
What works: Copy or move a document library containing one or more MM columns *within* a Site Collection = all column managed metadata replicated accurately.
What doesn't work: Copy or move a document library containing one or more MM columns *from one Site Collection to another* within the same Webapp. The issue is that some but not all MM values are totally wrong. By totally wrong I mean that the incorrect
terms are associated with a TermSet that is not even referenced in this DL!
Same result for all method's tried:
1) Save the DL as a template (no contents) and then copy or move the documents in
2) Programmatically do the copy
3) Export the list via CA and then reimporting it using Pshell
This thread is very similar but his workaround has not helped in this instance:
https://social.msdn.microsoft.com/Forums/office/en-US/6aca7b7c-97cb-4f1f-99f1-5e1fa0b1e3ed/content-type-hub-custom-library-template-managed-metadata-lostscrambled-when-moving-files?forum=sharepointdevelopment#65b52342-408f-47b4-a9f8-5d0b952acc12
Has anyone else experienced this and found the cause/solution? Or can anyone do this without the issues that I have described?
Thanks

Hi Nuno,
I've got to the root of the issue but in answer to your question first: The MM column is attached to a Global Content Type - there is nothing local.
The fact that some are ok and others are not led me down the route of checking the columns at item level. Scripting this did not help - all rows returned are what I would expect. ie The same MMColName with the expected value (as appearing
on the source DL).
On checking SharePoint manager however I have found what looks to be causing the issue.
When checking the properties (ie SiteCollection/Lists/<ListName>/items/<itemName>/Properties) of the 'good' documents against the 'bad' documents I find the following:
Good Docs: The MMColName is displayed as expected at the item level
Field: Name
Field: Internal Name
Item Properties:
Ok?
Partnership Type
Partnership_x0020_Type
Partnership Type
Y
Bad Docs: The MMColName is NOT displayed as expected at the item level. Instead the internal name is displayed:
Field: Name
Field: Internal Name
Item Properties:
Ok?
Register Type
Type_x0020_of_x0020_Licence
Type_x0020_of_x0020_Licence
N
Meeting Type
Meeting_x0020_Type
Meeting Type & Meeting_x0020_Type (Both columns are listed)
N
I should add that each of these 3 examples are taken from 3 different DL's - hence the different Fields
So this looks to be a case of corruption - and unless we can think of any other outcome we will have to look to rebuild the DL - while trying to maintain the metadata!

Is possible to connect to more than one core WAE from edge?

Hi,
I am trying to find in the documentation, but it is being hard to solve, if it is possible to connect simultaneously to more than one Core-WAE from a Edge-WAE

With the release of 4.1, the concept of core and edge becomes less of a concern. All devices are edge and acceleration is between any edge device.
The WAE is looking for the present of TCP option 21. If found, the WAE knows there is a peer WAE it can accelerate with.
-Dan

Is it possible to connect a DEV System to more than one SAP Solution Manage

Hello,
My system DEV is already connected to a first SAP Solution Manager, I would also like to reconnect the same system so that it communicates and will be monitored by a second SolMan.
Is it possible to do so and the do the operation involve any risks ?
Thanks for your help
Regards
Ben

Hello,
This is possible in many scenarios. Often this is done to distribute load, for example on Solution Manager will do the Service Desk Function, one may do ChaRM, one may be doing Monitoring & Reporting, one may be doing Diagnostics.
In these cases a managed ssytem can be connected to many Solution Manager systems.
However as Mateus has pointed out, you cannot connect one managed to two Solution Managers and do SMD on both Solution
Manager systems, but you can have more than one Solution Manager doing Diagnostics.
Even in the case of EWA, while you can connect a Managed system to multiple Solution Manager systems and have then generate a report, one of the Solution Manager systems must be defined as the Master.
So the specific scenario may place some restrictions on connecting a managed system to more than one Solution Manager,
but for most instances it can be done.
Regards,
Paul

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
Help!

No, unless you are using a home theatre system already, your only option is to connect to the TV.

No more possible to connects one Linksys 54GL to another linksys 54GL

Similar Messages

Maybe you are looking for