No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Similar Messages

How can I return files in Trash, more than 1 at a time? I can place many files into Trash at a time.

I placed many unix.exe files into Trash, more than one at a time. I recently updated 'QuickTime' and the Mac version of 'SilverLight"
(name might be totally 'correct). I don't know if removing these files can impede my iMac 2008 running OS 10.6.8(updated SnowLeopard).
I know I can 'return' one file from Trash at a time. When I try to return more than one ('mouse click' and 'drag'
over 2 or more files, the'return' option isn't listed. Is there a way I can either 'return all' or return more than one file
at a time?

Only one at a time. But where are they from? Did you delete system files or are these Windows files (.exe is a Windows extension?)

On 4S how can I delete emails more than one at a time in my Inbox

Just got the iPhone 4S (first ever iPhone for me). When I have emails in my Inbox and I want to delete them is there a way to delete more than one at a time? I know when I go to the Trash it lets me "delete all". I get quite a bit of emails and it's a huge waste of time to only be able to delete one at a time in the Inbox.

I'm trying to find a way of clicking one box/area and it deleting all the emails in the Inbox.
It can't be done from the iPhone. You could use Safari, access your webmail and delete from there, if that's easier.

Multiple AirPort Express units - use more than one at a time?

If I connect three Airport Express units in three different rooms, can I use more than one at a time?
Can I choose to only use 2 out of the 3 at one time?
Thanks.

Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.

HT1725 I can no longer download music from itunes store. Happened when I was Downloading from songs dragged from itunes store to a playlist. I tried to downloaad more than one at a time. The download stopped. Now I can not download at all.

I can no longer download music from itunes store. It happened when I was trying to download songs dragged into a playlist. I tried to download more than one at a time. It stopped. Now I cant download at all. Even rebooted my machine.

OK thanks I will try that. I just don't understand why I still can't download new videos as I've deleted the software I installed and I've changed my camera settings back to what they were before when I could download into iPhoto. I perhaps should have mentioned it's iPhoto '08 version 7.1.5. Is there any way of putting iPhoto back as the "default download and view" programme?
It could be as simple as longer (larger) videos - iPhoto does not always handle larger video files well
Is there any way of putting iPhoto back as the "default download and view" programme?
iPhoto is not a download and view program - it is a photo management database program that imports photos - Image Capture is a download program - Preview is a view program
The default program to download your photos is set in the preference panel of either iPhoto or image capture
LN

Can email be erased more than one at a time on my iPad?

I want to know if email can be erased more than on at a time on my iPad?

Yes, go to the folder and then Edit in top right, select the emails for deletion and follow the prompts from the bottom left.

Why won't Garage band let you open more than one project a time..

Why won't Garageband let you open more than one project a time???? If thats the way its is set up...that is really lame. Even the worst audio programs allow you to run a few projects at a time.
I recorded a gig the other night... then I dumped the whole set on to one track. When I wanted to copy and paste individual songs into their own project it made me close the current project. Is there a way around this???
Joe

Heh, heh. Yes, this is true. Alas... BUT, if you want to compare one project with another, it can be done.
There is another advantage to making another copy of GarageBand. I created a copy and call it "GarageSymphony" that contains all my instrument specific icons for orchestral packs. This way I do not mess up the GarageBand application.
I would not be surprised to find multiple windows become available in GB4. I was more than pleased to find this change in iMovie 6.

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

See this page from another forum member turingtest2. He might even chime in here if he sees it to offer any additional advice.
Audiobooks on iPods
B-rock

I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?

I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?
I thought a screen dump of the sttus may help picture what I am looking at.

Mike,
That article did seem to confirm that it is not as straight forward as it might seem. Since then I have deleted some of the TV episodes I downloaded on iTunes and the available storage has increased, so I can only assume that when reviewing in finder the files for iTunes are not shown and it would appear one has to go into iTunes to delete them.
I guess I may need to set up an external hard drive to store TV series etc as long as it is easy to transfer between the external drive and the MAC and subsequently my iPad as well, but that is for another discussion.

Ipad safari browser not responding if page takes more than 2 minutes processing time.

ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.

ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask apple id confirmation from me. I never confirm anything because I don't know,the link's attached, it's legal or illegal.

Dear Apple support team,
I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask my apple id confirmation from me about 6-8 emails. I never confirm anything because I don't know,the link's attached, it's legal or illegal.
The latest link (just be sent to my email 1 hr. ago) : http://www.smartpixeladv.com/proma/Login/index.html
Text is:
Dear Customer,
We recently noticed an unusual activity in your iTunes account. Please complete the process to confirm your
informations.
Confirm Now>
This link will expire three days after this email was sent.
If you don’t make this request, your account will be blocked for security reasons.
Apple Support
In my opinion, i think "http://" should be "https://" right? Or Apple should show the link on your website that we can find, re- check and click by ourselve. Or Apple should do "How to confirm apple id" on your main page. ( in fact i'm not sure you already done "How to" on your website yes or not, because I cannot find it)
The apple id is sensitive security, it's concerned personal security and any credit card payment so please understand me that's why i must to interrupt your team to help me to solve this problem. I'm scared my account will be blocked. Please advice me.
Wassa. (BKK)

It is a phishing attempt to get your Apple ID and Password.
You should forward it to Apple : [email protected]

HT1420 My computer just got back from getting fixed, they wiped out everything. Now I cant authorize my i phone purchases because it says Its been done by more than 5 computers? If you can please help. Thanks

My computer just got back from getting fixed, they wiped out everything. Now I cant authorize my i phone purchases because it says Its been done by more than 5 computers? If you can please help. Thanks

Use the Deauthorize All function documented in the article you asked this question from.
(73313)

Wait until the session has been processed

Hi folks,
I have a report in which I create and trigger an SM35 session. I use RSBDCSUB report to do the same.
Now, is there anyway to wait until the session has been processed? I mean, I need to do a few things in the report only after the session has been processed.
Thanks
Sagar

Hi,
You could try checking the job status (table TBTCO) inside a DO or WHILE loop. To pause up to 5 seconds between your lookup on TBTCO, you can call function module 'RZL_SLEEP'.
If checking TBTCO does not work out for you, you can try the same loop logic with a call to function module 'ENQUEUE_BDC_QID' instead of looking up the job status. If the enqueue has been released then the job has finished.
Regards,
James G.

Importing more than one at a time

when I try to use the option to import files that are on my computer already it only allows me to do one at a time I have tried both a shift and a control key to try to get more than one file at a time and it does not work so from what I have read i used the add folder option to add music to my library. the problem is then that if I want to try to "get CD Track names" it says this can only be used on files that were imported in iTunes please try importing the file again. I do not want to have to do a file at a time just to use some of the fetures is there a easier way?

Either use finder to drag and drop those tracks onto
"Library" in iTunes' left "Source" column or from
iTunes Menu Files use "Add to Library ..." then
navigate to a folder that keep a yoru tracks and
select that folder.
This did it! I was doing an "import" which would only let me do one song at a time. But the "add to library" and the drag and drop both worked. Thanks!!!
New Mac user
Scott in Alaska
MacBookPro Mac OS X (10.4.5)

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

Similar Messages

Maybe you are looking for