No more than 2 event structure?

I don't anderstand how can I do my programm because I read that we must not use 2 events structures in one loop. But concerning my programms for instance I have to fill arrays only when I press each appropriate "Ok" button (for instance for 5 case I have to press 5 different OK button ) and so on (when I press OK number 6 the program write to excel program.. when I press OK number 7.. )
How can I do it? I need to create 7 events structures for 7 actions?
labview 7.0

When they say not to use two event structures in one loop they are refering to the number of actual "event structures" that are dropped on to the diagram, not the number of events that one structure can handle. You could have "an event" configured for each of your "ok" buttons, and then have those events, when triggered, select a different case of a case structure, possibly on the "timeout" event. If you built it like that, make sure to have a timeout value wired to the upper left corner, or it will default to -1 (never timeout).
Here is a very simple example of one way to implement it.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Attachments:
simple event.vi ‏36 KB

Similar Messages

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Can I have a photo in more than one event?

I understand that it is normally not possible to have one photo in more than one event at a time.
I am quite careful about arranging my photos into events logically, but find in my library tere are several events called [Date] Photo Stream, which I've not delivberately created. It appears that in many cases the photos these Photo stream events contain are also in other events.
Can anyone tell me what is going on here? Can I safely delete the Photostream events and their contents?

To have a photo in more than one Event it must be duplicated and the duplicate added to the other Event. A photo can be in multiple albums, books, slideshows without having to duplicate the photo as those use pointers to the original photo.
At the beginning of each month new photos in the Shoto Stream are imported into an Event with the month and year as the Event name. All photos taken that month are added to that Event. That's because the iPhoto/Photo Stream preferences are set to auto import photos taken by your mobile devices:
Events are basically buckets of photos based on the date taken and how you've setup iPhoto's preferences for importing photos:
Merging Events can change the location in the resulting event among the other events due to the variety of dates of the photos.
OT

In month view, can't see more than 2 events per day...

I always keep my calendar in the "month" view because I have so much going on... But each day won't display more than two events. If I have more than two events, there's a "..." at the top of the day with two of the events underneath it. Each box for each day has so much space! I could fit like 5 other events! How can I display them all??

Is there a way to make things on the screen smaller? I've tried to use the touch screen taking my fingers and pulling together like you would zoom in and out but that doesn't work. This did not solve my problem. I hit the wrong button again. I have fat fingers.

More than one sender structure assigned to receiver structure R_*

We are doing a time based reduction using TDMS 3.0.
At the phase called " assign domain rules", we get warning (not error):
"more than one sender structure assigned to receiver structure R_*".
I have searched SND and SMP, google as well but no thread is found for this warning.
How to fix this problem?
Thanks!

Hi David,
They basically are referring to some of TDMS tables where the data type of the header table is different when compared to the underlying child table. The header table refers to TDMS own table for which the data element has been deliberately changed to hold data from other tables as well. This warning will not have any effect. You can ignore them.
Regards
Niraj

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

Job execution depend on more than one event

Hi gurus,
Does anybody know if there is some way to execute a JOB dependent of more than one event raised?
I have a JOB that need to be executed only when two events are raised.
I have created those events using tCode SM62.
Thanks in advance,
Silvio Messias

These more complex dependencies cannot be realised in the SAP standard (as far as I know), I assume the events could come in any order, so I have a hard time thinking about a workaround.
You probably need external scheduling software (like TWS or Batchman), or program your own add-on solution.
Thomas

More than 2K Events, How can I Group Them?

I have more than 2000 events (so far). Anyone know of a way of grouping them so that I only view a few hundered at a time? I also want to publish certain of the to different .Mac accounts, but can't see how to do that either.

Welcome to the Apple Discussions. You can put them in albums or smart albums. With smart albums you can set the criteria to be a date range or some other feature of those you want to group together.
To publish to different .Mac account you can go thru the .Mac preference pane and change accounts that way before publishing. Or you can create a separate account for the other .Mac account and publish from that account. To use the same library in both accounts you'd want to move it to the Shared folder and change the preferences so that both accounts have read and write access to it.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I have a problem when syncing my iphoto library to my iphone 3gs. There apprears to be more than 40 events with the same names but containing only 2-5 pics in my itunes sidebar when in fact I only have around 10 events on iphoto. How do I fix this?

This has never happened before, and I've tried deleting all photos off my phone then syncing them all instead of specific events and nothing. I have around 10 events in my iphoto library but around 3,500 pictures. I have more than enough space on my phone but I only like to sync certain events, so when I go sync them I notice there are over 40 events listed, and all of them have the same name but it seems as though each "event" has like 2 photos.. On my phone all the different events come up as well. This is super annoying, does anyone know how to fix this ?

I have the exact same problem!
I have about 25 albums and a total of 8,100 pictures. When i go to iTunes -> "My iphone" -> Pictures, and then check the box to sync choses events the list of events is messed up. The same events shows up like 3-4 times and the events only have a couple of pictures in them.
Does anyone know what can be causing this? Or what can be done to fix it?
Using iPhone 4, latest IOS and latest V of Snow Lep..

Can a Method listen to more than one event in ABAP OO ?

Hi,
is it possible to prepare/register a handler method for e.g two events of two different classes ?
Or can a method generally listen to only one event ?
It seems that the syntax allows only one event ?
methods event_handler for event my_event of my_class.
Thanks for help in advance
Olaf

An event can refer to more than one object but you have to instantiate the objects
for example   I have 2 grids and want to handle events depending on which grid
the user is selecting / requesting actions on. (I've just posted the relevant bits coded here as data extraction etc you can code normally).
FORM instantiate_grid
* Create Grid container
* Instantiate Grid class
* Instantiate Event Handler class
* Display the Grid
   USING grid_container TYPE REF TO cl_gui_custom_container
          class_object TYPE REF TO cl_gui_alv_grid
          container_name TYPE scrfname.
* create the container
CREATE OBJECT grid_container
EXPORTING container_name = container_name.
* Create the ALV grid object using
* container just created
CREATE OBJECT class_object
EXPORTING
     i_parent = grid_container.
* Exclude the SUM function from the GRID toolbar
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO lt_exclude.
* Instantiate our handler class
* lcl_event_handler
CALL METHOD class_object->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CREATE OBJECT g_handler.
SET HANDLER g_handler->handle_double_click FOR class_object.
SET HANDLER g_handler->handle_hotspot_click FOR class_object.
SET HANDLER g_handler->handle_toolbar FOR class_object.
SET HANDLER g_handler->handle_user_command FOR class_object.
SET HANDLER g_handler->handle_data_changed FOR class_object.
SET HANDLER g_handler->handle_data_changed_finished FOR class_object.
ENDFORM.                    "instantiate_grid
MODULE status_0100 OUTPUT.
IF grid_container IS INITIAL.
    PERFORM instantiate_grid
       USING grid_container
             grid1
             'CCONTAINER1'.
* Grid title Primary Grid
    struct_grid_lset-grid_title = 'Delimit Old org Units - Selection'.
    struct_grid_lset-edit = 'X'.
    struct_grid_lset-sel_mode = 'D'.
    PERFORM display_grid
     USING
        grid1
         <dyn_table>
         it_fldcat.
ENDIF.
SET PF-STATUS '001'.
SET TITLEBAR '000' WITH 'Delimit Old Org Units'.
ENDMODULE.                    "status_0100 OUTPUT
* PAI module
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'CANC'.
      LEAVE PROGRAM.
    WHEN 'RETURN'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                    "user_command_0100 INPUT
MODULE status_0200 OUTPUT.
IF grid_container1 IS INITIAL.
    PERFORM instantiate_grid
       USING grid_container1
             grid2
             'CCONTAINER2'.
* Grid title secondary grid
    struct_grid_lset-grid_title = 'Delimited Objects'.
    struct_grid_lset-edit = ' '.
    PERFORM display_grid
     USING
        grid2
         <dyn_table1>
         it_fldcat1.
SET PF-STATUS '001'.
SET TITLEBAR '000' WITH 'Org Units Delimited'.
endif.
ENDMODULE.                    "status_0200 OUTPUT
In your local event handling class use the variable SENDER to determine which grid / object triggered the event
for example
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
    METHODS:
**Hot spot Handler
    handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
                      IMPORTING e_row_id e_column_id es_row_no,
**Double Click Handler
    handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
                                    IMPORTING e_row e_column es_row_no
                                    sender,
** Toolbar handler.
handle_toolbar
        FOR EVENT toolbar OF cl_gui_alv_grid
            IMPORTING e_object e_interactive
            sender,
* button press
    handle_user_command
        FOR EVENT user_command OF cl_gui_alv_grid
            IMPORTING e_ucomm
             sender,
* data changed
handle_data_changed
    FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed,
*data changed finished
handle_data_changed_finished
     FOR EVENT data_changed OF cl_gui_alv_grid,
download_to_excel.
ENDCLASS.                    "lcl_event_handler DEFINITION
* Implementation methods for lcl_event_handler
CLASS lcl_event_handler IMPLEMENTATION.
*Handle Hotspot Click
* When a "hotspotted"cell is double clicked
* Hotspot indicatore needs to be set in
* the field catalog.
* Not required for this application.
METHOD handle_hotspot_click .
    PERFORM mouse_click
      USING e_row_id
            e_column_id.
    CALL METHOD grid1->get_current_cell
      IMPORTING
        e_row     = ls_row
        e_value   = ls_value
        e_col     = ls_col
        es_row_id = ls_row_id
        es_col_id = ls_col_id
        es_row_no = es_row_no.
    CALL METHOD grid1->refresh_table_display.
    CALL METHOD grid1->set_current_cell_via_id
      EXPORTING
        is_column_id = e_column_id
        is_row_no    = es_row_no.
ENDMETHOD.                    "lcl_event_handler
*Handle Double Click
METHOD handle_double_click.
    CASE sender.
      WHEN grid1.
* returns cell double clicked FROM GRID 1
* Ignore any event from GRID 2
        PERFORM double_click
           USING e_row
           e_column.
    ENDCASE.
ENDMETHOD.                    "handle_double_click
* Add our buttons to standard toolbar
METHOD handle_toolbar.
    CASE sender.
* Only add functionality to PRIMARY GRID (GRID 1)
      WHEN grid1.
* append a separator to normal toolbar
        CLEAR ls_toolbar.
        MOVE 3 TO ls_toolbar-butn_type.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Delimit Org
        CLEAR ls_toolbar.
        MOVE 'PROC' TO ls_toolbar-function.
        MOVE icon_railway TO ls_toolbar-icon.
        MOVE 'DELIMIT' TO ls_toolbar-quickinfo.
        MOVE 'DELIMIT ORG UNIT' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Select All Rows
        MOVE 'SELE' TO ls_toolbar-function.
        MOVE icon_select_all TO ls_toolbar-icon.
        MOVE 'ALL CELLS' TO ls_toolbar-quickinfo.
        MOVE 'ALL CELLS' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
* Deselect all Rows.
        MOVE 'DSEL' TO ls_toolbar-function.
        MOVE icon_deselect_all TO ls_toolbar-icon.
        MOVE 'DESELECT ALL' TO ls_toolbar-quickinfo.
        MOVE 'DESELECT ALL' TO ls_toolbar-text.
        MOVE ' ' TO ls_toolbar-disabled.
        APPEND ls_toolbar TO e_object->mt_toolbar.
        ENDCASE.
     move 0 to ls_toolbar-butn_type.
     move 'EXCEL' to ls_toolbar-function.
     move space to ls_toolbar-disabled.
     move icon_xxl to ls_toolbar-icon.
     move 'Excel' to ls_toolbar-quickinfo.
     move 'EXCEL' to ls_toolbar-text.
     append ls_toolbar to e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar
METHOD handle_user_command.
* Entered when a user presses a Grid toolbar
* standard toolbar functions processed
* normally
   g_sender = sender.
    CASE e_ucomm.
      WHEN 'PROC'.    "Process selected data
        PERFORM get_selected_rows.
      WHEN 'SELE'.
        PERFORM select_all_rows.
      WHEN 'DSEL'.
        PERFORM deselect_all_rows.
      WHEN 'EXCEL'.
          call method me->download_to_excel.
        WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_user_command
METHOD handle_data_changed.
* only entered on data change Not req for ths app.
    PERFORM data_changed USING er_data_changed.
ENDMETHOD.                    "data_changed
METHOD handle_data_changed_finished.
* only entered on data change finished Not req for ths app.
    PERFORM data_changed_finished.
ENDMETHOD.                    "data_changed_finished
* Interactive download to excel
method download_to_excel.
field-symbols:
   <qs0>   type standard table,
   <qs1>   type standard table.
data: G_OUTTAB1 type ref to data,
        g_fldcat1 type ref to data,
        LS_LAYOUT type KKBLO_LAYOUT,
        LT_FIELDCAT type KKBLO_T_FIELDCAT,
        LT_FIELDCAT_WA type KKBLO_FIELDCAT,
        L_TABNAME type SLIS_TABNAME.
case g_sender.
when grid1.
     get reference of <dyn_table> into g_outtab1.
     get reference of it_fldcat into g_fldcat1.
   when grid2.
   get reference of <dyn_table1> into g_outtab1.
     get reference of it_fldcat1 into g_fldcat1.
endcase.
   assign g_outtab1->* to <qs0>.
    assign g_fldcat1->* to <qs1>.
       call function 'LVC_TRANSFER_TO_KKBLO'
      exporting
        it_fieldcat_lvc   = <qs1>
*     is_layout_lvc     = m_cl_variant->ms_layout
         is_tech_complete = ' '
      importing
        es_layout_kkblo   = ls_layout
        et_fieldcat_kkblo = lt_fieldcat.
    loop at lt_fieldcat into lt_fieldcat_wa.
      clear lt_fieldcat_wa-tech_complete.
      if lt_fieldcat_wa-tabname is initial.
        lt_fieldcat_wa-tabname = '1'.
        modify lt_fieldcat from lt_fieldcat_wa.
      endif.
      l_tabname = lt_fieldcat_wa-tabname.
    endloop.
    call function 'ALV_XXL_CALL'
         exporting
              i_tabname           = l_tabname
              is_layout           = ls_layout
              it_fieldcat         = lt_fieldcat
              i_title             = sy-title
         tables
              it_outtab           = <qs0>
         exceptions
              fatal_error         = 1
              no_display_possible = 2
              others              = 3.
    if sy-subrc <> 0.
      message id sy-msgid type 'S' number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
endmethod.
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
The sender instance is a variable such as g_sender type ref to cl_gui_alv_grid.       "Sender instance.
The above example is for OO ALV grids but should work for other interactive cases where a User presses a key or does a mouse action.
Cheers
jimbo

Server chaining OID to more than one AD structure

Is it possible to server chain OID to more than one hierarchy within the same MS Active Directory (AD). That is, have two entries under 'Server Chaining Management' referring to separate areas of the one AD structure?

From the documentation:
http://download-uk.oracle.com/docs/cd/B28196_01/idmanage.1014/b15991/serverchain.htm#BABFJIFB
"An implementation of Oracle Internet Directory can connect with one Active Directory server, one Sun Java System Directory Server, or with both"
Sounds to me that you need Oracle Virtual Directory.
BR,
Octavian

Subscribe to more than one event using one booking form

Hi,
I am wondering whether it would be possible to subscribe someone to multiple events at once. Bacially I have a course that is split over 2 days, some people will only want to go to one of the days and some will want to attend both.
Say I set up 3 events:
Course X - Day 1
Course Y - Day 2
Course Z - Day 1 & 2
Is it possible to have a seperate booking form for Course Z - Day 1 & 2 that would subscribe them too both Course X - Day 1 and Course Y - Day 2 rather than to Course Z - Day 1 & 2. Can I amend the form action to do this?
Thanks,
Dean

Dean,
Devil is the detail, but this is possible. BUT NOT SIMPLE!
Id only ever quote and charge a client to do this, to implement it.
So id say you could email [email protected] if you wanted and Brett/I can quote you up and do it. You can find someone to help on this as well of course if you want.
Its complicated because you will be doing javascript, ajax and some tricks with BC, As you can see, BC staff memeber not even sure how you would do it.
You need to access different bookings and data, create forms of relationships etc.
But, would need the full run down of the task at hand to properly know if its 100% but you can do this.

Is it possible to have more than one event/project in Imovie at the same time?

Let me see if I can shorten this. I am working on a project for a review. It's going to take quite awhile and I'm half way through it. However, I need to work on another project, one thats short and I can dish out fairly quickly. My problem is that I cannot start it without discarding my current project. Which I cannot do because I will lose a weeks worth of data. And I cannot save it because it will combine all the clips and I would have to re-split them (half a days progress).
So in short, is there a way to save my project as-is? Or possible create a new event and start a new project while maintaining my current work? Thank you for your help!

Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
You can have as many Projects as you like. You don't need ot finish one before you begin another.
Post back if you have specific questions.
Matt

Calendar - how to enter more than one event per date and show it in the Month display?

I would like to enter multiple events (two, anyway) for a single day in the calendar. I would also like that Month view to display the two events. So far, all I've been able to do is enter a single event; in fact, only a single line for the single event. If I enter in Notes, they're not displayed in the Month view. Thank you.

I assume that you are tapping the + sign to enter additional events and that is not working so try quitting the app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

No more than 2 event structure?

Similar Messages

Maybe you are looking for