No more than 6 entries will show on my site.

I had a year long blog with an older version of iWeb, but this version is not displaying anymore than 6 entries at a time in Safari.
I tried duplicating the entry and deleting the old #7, but it cuts off the bottom entry on the list leaving only six entries showing. Help!
I started this site as a homeowners discussion group and now I'm limited to topics we can argue over;-)

I went to the directions you gave me.
By default, there is no limit listed. I was not able to change to any number (it is grayed out).
II did go to the MobileMe chat and had the following session. (It didn't solve the problem).
Thanks for the reply!
Chat Transcript
info: queue_cmd:1:1:17
info: Hi, my name is Jake S. Welcome to Apple!
Jake S: Hi Paul
Paul Yeiter: Hi Jake, did you get my problem?
Jake S: I show you are unable to publish more than 6 pages now with iWeb correct?
Paul Yeiter: Yes, 6 blog entries.
Jake S: 6 blog entries...I see....I'll pull the account up quickly and see what we can find out Paul
Paul Yeiter: thanks
Jake S: I'm sorry for the delay. I'll be right with you.
Paul Yeiter: OK
Jake S: When was the last time that you were able to publish correctly Paul?
Paul Yeiter: I'm not sure when it dropped off the last entry. Maybe a moth ago.
Paul Yeiter: I've used earlier versions of iweb to journal for a year with no problems.
Paul Yeiter: Can you see old enties?
Jake S: Are you currently on iWeb 09 or 08?
Paul Yeiter: 08
Jake S: Unable to see any previous entries...only the 6
Paul Yeiter: there should be a Miscellaneous one as well
Jake S: In archives I see that too yes
Paul Yeiter: Before today, I combined Kudos with Misc. to keep it @ 6 show things would show
Jake S: I'll see how we can get this corrected Paul
Paul Yeiter: OK
Jake S: If you publish to a folder will it show any updated information?
Paul Yeiter: I haven't tried that.
Jake S: I'll also setup a test account for you to publish to so we can see how it reacts there as well
Jake S: If it publishes the same way to a test account there would be something within iWeb that would need to be addressed with the iApps team but if it shows new information, we should be able to republish that to the main pyeiter account and have it come up normally too
Paul Yeiter: what would you like me to do?
Jake S: Quit iWeb, sign out of mobileme in system preferences and then sign in again with this username and password please
Jake S: username mmtesting________
Jake S: password apple______
Jake S: then open iWeb again and Publish All To Mobileme
Paul Yeiter: OK
Jake S: let me know once it completes and we'll check it out
Paul Yeiter: It's publishing, but could take a while
Jake S: Any approximate estimate?
Paul Yeiter: No, just working in the background.
Jake S: just from prior publishing that is...a guesstimate from you?
Paul Yeiter: 4 minutes?
Jake S: No worries then....I'll stand by
Paul Yeiter: Jake,
Paul Yeiter: While we're waiting.
Jake S: sure?
Paul Yeiter: Is it possible to recover an iweb blog I kept 2.5 years ago? When I upgraded computers, I lost it. It was an account of my wife's fight with cancer. I was hoping to keep it as a record or publish it in an iBook.
Jake S: As far as I know, if its in the domain file from the page it should be recoverable....that may be a question better suited for the iApps team with Apple Care....they support iWeb to a much fuller capacity than we do here in chat.....
Jake S: We can help with any publishing type issues but as far *** restoring any previous versions, they would be better to ask...sorry I dont have a better answer for you there Paul
Jake S: as far AS restoring....sorry bout that too
Jake S: spell check wont catch everything
Jake S: If we run into the same blog issues with the test me account that you see in the main pyeiter account, I'll recommend you speak with them as well to see if they can help figure out why iWeb wont publish more than 6 entries
Paul Yeiter: "if its in the domain file from the page it should be recoverable" What does that mean?
Jake S: 1-800-APL-CARE (1-800-275-2273) and there is the number just for future use Paul
Jake S: the single domain file encapsulates all the iweb sites and pages that you currently publish
Jake S: If the other blog kept from 2 years ago is still in a domain file somewhere, it should be recoverable
Jake S: so by changing versions or upgrading operating systems, it may or may not be able to be recovered....Im not certain...thats why I would recommend speaking with iApps about that one
Paul Yeiter: Do I need an AppleCare account to access the above number?
Jake S: The support is with apple care warranty coverage yes...but they will also bill per incident if no warranty is current
Jake S: I think Mobileme is the only support included with the annual service price and needs no apple care warranty
Paul Yeiter: I just got an iWeb notice of a "Publish Error
Jake S: Looks like the page is done....what is the error?
Paul Yeiter: An error occured while publishing file"/web/.Temporary Web Resources/88BF123E-3025-4620-A343-153E12737CB9
Paul Yeiter: Try publishing again later
Jake S: It looks like a keychain error....not critical...it published the page....it can be rectified by resetting the router or even repairing permissions to the mac startup disk
Jake S: but what does stand out is the same 6 entries....now on the page have you limited it to 6? If not how many more entries should be shown?
Paul Yeiter: There are 7 entries in iWeb (at this time)
Jake S: the difference I see off hand is the comments on the Annual Meetings are not present in the test mobileme account
Jake S: So from here, this is what I recommend Paul....go ahead and quit iWeb again
Jake S: then in system preferences>mobileme sign in as pyeiter again
Jake S: then open Finder and go into Applications>Utilities and open Disk Utility
Jake S: Click on the mac hd on the left side, run the repair permissions option and once its done reboot the mac....
Jake S: After rebooting, go into iWeb and select the Publish All to Mobileme option again and see if the 7th entry shows up as well as making sure there is no publishing error
Jake S: Im not sure if the problem lies in the page, the application or the keychain but since the error only presented itself in a test account, I would say the keychain would be fine
Jake S: something else that I would recommend, while we are still in chat, is to publish to a folder as well and see if the new entry shows....
Jake S: that can help isolate where the breakdown is as well...shouldnt take as long to publish to a folder as it does to the account
Paul Yeiter: I guess this is goodbye. If it doesn't work... should I call the Apple Care #?
Jake S: Yes...another thing that comes to mind would be to sort of flush out iweb....create a simple test page, move it to the first site on the left side and publish...once its shown correctly, delete it and with the main site in the first site position, publish again
Jake S: so there are a few options to go with but ultimately if none of the blog entries are updating, apple care would be the next point of contact
Paul Yeiter: "move it to the first site on the left" ?
Jake S: correct...on the left where you see Site and then pages under it....if you create a new site it would be 2nd on the list....just drag it above the main site so it is in the first position
Paul Yeiter: OK. Thanks for your time and expertise!
Jake S: I sure hope it helps Paul
Jake S: Have a great weekend and take care!
Jake S: Thank you for chatting with us. We value your feedback. Please click the blue "Close" button at top left to answer a few questions about your experience with us today.
info: Thank you for chatting with us. Please click the blue "Close" button on the top left of the chat window to tell us how we did tod

Similar Messages

Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been usin

Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been using adobe forms for 2 years with mass response feedback and have never had this problem.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

How to print a graph in which internal table has more than 32 entries?

hiii experts
i am trying to make a line graph using 'gfw_pres_show' function module.
but in report internal table has more than 32 entries
so how can i print a graph having more than 32 entries?

Hi ricky_lv,
According to your description, there is main report and subreport in it, when the subreport spans across multiple pages, you want to show column headers on each page. If that is the case, we can set column headers visible while scrolling in main report.
For detail information, please refer to the following steps:
In design mode, click the small drop down arrow next to Column Groups and select Advanced Mode.
Go to your Row Groups pane, click on the first static member.
In properties grid, set FixData to True.
Set RepeatOnNextPage to True.
Here is a relevant thread you can reference:
https://social.technet.microsoft.com/Forums/en-US/e1f67cec-8fa3-4c5d-86ba-28b57fc4a211/keep-header-rows-visible-while-scrolling?forum=sqlreportingservi
The following screenshots are for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

How to pass more than 1000 entries in 'IN' clause, Oracle 11g

Hi All,
I know this is a very common question in Oracle discussion forum. But, Im in different zone.
I use C#, .NET and Oracle 11g. I have a situation where I will create a query statement using 'IN' clause in C# code based on my requirement and execute that statement from code itself with oracle connection object. I do not have any procedures. I must phrase my query statement and pass it on to OracleConnection object to execute it.
My code looks like this....
List<decimal> x_Ids = new List<decimal>();
I will load my IDs into x_Ids here;
string whereInClause = ........I will prepare a 'IN' clause (All IDs separated by ',')
My query would looks like this....
string query = select * from MYTABLE where X_ID in [ whereInClause with more than 1000 entries]
oraConn.ExecuteQuery(query);
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?
Can you please suggest any other workaround to overcome this situation?

>
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?There should be no performance difference between a statement like
select * from myTab
where ID in (1,2,3,4,5)
OR ID in (6,7,8,10,12) and
select * from myTab
where ID in (1,2,3,4,5,6,7,8,10,12) The execution plan should be identical.
However those values might better be send as a single object (collection or table of numbers type).
I think the ODP or OO4O connectivity allows to create and such oracle object types.
Another way could be to think about how all the values are created? Did any user enter them manually? Certainly not. Then maybe you can apply the same logic to the SQL statement that created those values in your .Net application.
something like
select * from myTab
where ID in (select t2.FK_ID from otherTab t2 where t2.Col1 = 100) This approach would probably beat all others performancewise. Since you avoid the overhead of constructing the in-lists.

Adobe Web Gallery- can't get more than 10 images to show up

I am trying to create a Web Gallery from within Bridge (CS4), but I'm not having any luck getting more than 10 images to show up when I create the Gallery, even though I'm selecting nearly 50 images (all in the same folder) that I'd like to be in the Gallery. Does anyone know if there's a limit to the number of images that can be used in an AWG? I can't seem to find ANY documentation that sheds light on that subject. All I know is that no matter WHAT I do, I can only get Bridge to create a Gallery with TEN images!! Very frustrating. Any help will be greatly appreciated.

Assuming the obvious that in Bridge content panel you have selected all the
files you want in the web galery
First try a purge cache for folder using the menu Tools/purge cache for
folder when having Bridge pointed to the problem folder.
Second try a reset preferences with option key while restarting Bridge.
I wish that were the case - it's only outputing up 10 images...

Report File Substeps only listed when more than 2 entries are present

Hi All,
a short question regarding report file generation. Our report file has the problem that the substep report texts are only printed when the substep has more than 2 entries inside. Once the third entry (even it is some dummy entry, but it must write something to the report file) is present the sub report texts can be found inside the report.
Michael

Hi,
Can you post an small example showing your problem?
Regards
Ray Farmer
Regards
Ray Farmer

Following Artists Does Not Display More Than 300 Entries.

Hello, This has been an issue for a long time now, with the web player. The Artists List, Following, etc. do not show more than 300 entries.I follow something 800+, and can't see over half of my 'music collection' on this service. Please for the love of everything; Remove the limit on the scrolling feeds with add more bands as you scroll. I am also becoming quite irate this isn't even being acknowledged. I've had no success in email exchange with support either. Once I told them I am a developer by profession, and have built similar feeds for various sites, they stopped the BS, and flat out ended the exchange. I don't understand.If you want to get my sub $, I want this to work properly. Thanks,

Any progress on this? Still an issue.What is the point of following artists if you cap the display number. I've built these infinite feeds myself, admittedly not in flash, rather json etc. and this should be pretty easy to fix. I'd like to be able to see all the artists I follow, not less than half. Thanks.

Error occurs when executing an item in an inbox with more than 1000 entries

Hi Everyone,
One of our approvers in SRM experienced an error when his inbox contained more than 1000 entries . Further execution on any inbox item produces errors.
Would you know where to set the maximum allowable entries in a user's inbox? Can this be set thru SRM config or Basis functionality?
We also searched for existing SAP Notes but found nothing.
Your inputs and help are greatly appreciated.
Thanks and Regards,
Vhong

Hello,
The user has sent me the screen shot. But this has no error messages. The approval transaction shows an ITS screen/code with template 'bbpapproval/99/saplbw02_1200.html'
However, we have a user in Quality where the page displays with no problem and with 1675 Entries.
Do you think this is more of an ITS setting or any Template/JavaScript issues?
I got this code (view source code) earlier today and the topmost header of the code is:

Regarding the not-so-good practice of approvers to have more than 1000 entries in their inbox, we are still in the process of planning on how to divide the task to different approvers since there is only one approver (Project Manager) for the related network.
Thanks and Redards,
Vhong

Vector or ArrayList use for dropdown with more than 1000 entries

Hi Friends
I am having more than 1000 entries of different TimeZone's which i need to display in a dropdown list.
i am not able to decide whether i need to use a Vector or Arraylist for storing these values.
please let me know which one will be best suited to use in case the list entry is more than 1000 characters.
waiting for a positive reply from your side.
Thanks & Regards
Vikeng

A JComboBox can be constructed from a Vector (rather than any other sort of List) without having to implement your own ComboBoxModel. (JList is similar).
I agree with kajbj - a control like this with a thousand entries is rather poor interface design. One exception might be if the entries are sorted in some way, and you "jump" to the appropriate place in the list as the user types.

CMDGW_CAT:3441: ERROR: Cannot have more than 3 entries in RACCESSPOINT LIST

Hi,
i have tuxedo 8.1 in HP-UX.
In the section of my dmconfig i have:
SERVICEF LDOM=DOMLOCAL RDOM=WTC1,WTC2,WTC3,WTC4
I have this error when i tried to compile with dmloadcf -y dmconfig:
Invalid value
CMDGW_CAT:3441: ERROR: Cannot have more than 3 entries in RACCESSPOINT LIST
CMDGW_CAT:1546: ERROR: dmloadcf: Above errors found during syntax checking
can I increase the value of the parameter RDOM over 3?
How?
thanks...

Hi,
The syntax:
service LDOM=local_domain RDOM= dom1,dom2,dom3
defines failover remote domains for that particular import. It's not meant to provide access to a service in multiple domains. What you want is basically what you did, i.e.,
service LDOM=local_domain, RDOM=dom1,dom2
service LDOM=local_domain, RDOM=dom2,dom3
service LDOM=local_domain, RDOM=dom3,dom4
service LDOM=local_domain, RDOM=dom4,dom1
This would provide load balancing across the 4 domains, and still provide failover domains, although if the connection policies are set to ON_STARTUP, then the following is sufficient:
service LDOM=local_domain, RDOM=dom1
service LDOM=local_domain, RDOM=dom2
service LDOM=local_domain, RDOM=dom3
service LDOM=local_domain, RDOM=dom4
As only the active domains will be used, and inactive ones will be skipped.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

HT2513 need to view more than 2 entries on monthly ical for mac

I want to view more than 2 entries on my monthly iCal for Mac.
I have plenty of space to do this but it just shows .........
Can anyone help

Hi,
you can use method setSizeLimit(collection) where collection is number of entries you want to set.
JsDoc Report - SAP UI development Toolkit for HTML5 - API Reference - sap.ui.model.Model
Regards,
Chandra

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

More than 4 devices to show up in find my iphone

I'm trying to get more than 4 devices to show up in my Find my iPhone app, I need 6 to appear. All 6 devices are registered under the one apple user ID. I can get 4 to show up perfectly however I've obviously done something different for the last 2 cause for the life of me I can't get them to show up I've googled it for the last hour and I can see up to 10 devices can show up.
Each iPhone/iPad has Find My iPhone enabled under Location Services. Please help

You said you tried multiple things. You probably already did it, but did you power off the phone and power it back on? My iPhone was showing up on my Find my iPhone application, but my son's iPod was not showing up. I turned off the location on the iPod and turned it back on. Then I fully closed out the application on both the iPod and my iPhone. I shut off both devices and turned them both back on. After that it showed up right away.

More than one entry in /etc/defaultrouter

To my surprise, it's possible to put more than one entry in /etc/defaultrouter. It's even documented in the man page and if you do it you end up with what looks like more than one default route. But what's does it mean to have more than one default route? Does the kernel apply some kind of heuristic to decide which one to use? Does the default route with no device get ignored?
$ cat /etc/defaultrouter
10.8.60.1
10.8.127.1
$ netstat -nrv
IRE Table: IPv4
Destination Mask Gateway Device Mxfrg Rtt Ref Flg Out In/Fwd
default 0.0.0.0 10.8.60.1 1500* 0 1 UG 761582 0
default 0.0.0.0 10.144.128.1 e1000g3 1500* 0 1 UG 3546367 0
10.8.60.0 255.255.252.0 10.8.61.22 e1000g0 1500* 0 1 U 2703697 0
10.144.128.0 255.255.252.0 10.144.131.243 e1000g3 1500* 0 1 U 119119 0
224.0.0.0 240.0.0.0 10.8.61.22 e1000g0 1500* 0 1 U 0 0
127.0.0.1 255.255.255.255 127.0.0.1 lo0 8232* 0 52 UH 22475898 0
$

john_lilburne wrote:
To my surprise, it's possible to put more than one entry in /etc/defaultrouter. It's even documented in the man page and if you do it you end up with what looks like more than one default route. But what's does it mean to have more than one default route?Probably not what you want.
Does the kernel apply some kind of heuristic to decide which one to use? Does the default route with no device get ignored?Round robin.
What do you mean by "no device"? You have to have an IP destination or the route couldn't be configured. But that IP destination doesn't have to be currently available. Unplugging a cable doesn't take an IP interface "DOWN", nor does it modify the routing table.
If you need dynamic, failure-resilient routing, then you'd have to run a routing update protocol. The contents of /etc/defaultrouter are for static routes.
Darren

No more than 6 entries will show on my site.

Similar Messages

Maybe you are looking for