No more than 8Mbps for writing files with TC !

Hello,
I just buy a brand new TC 3To. Internet bandwith is great (more than 80Mbps), but no more than 8 Mbps for writing a file between my mac and the Time Capsule.
How can you explain that ?
Thx

Test it with ethernet not wireless if you are on wireless.
What computer are you copying the files to the TC with? What OS and how are you copying?
Is it one large file or a bunch of small files.. the later can be really slow due to time it takes to write allocation table info, cf the actual copy.. the best test is one very large file.. 2GB or so that you copy.. Make sure you do not copy files to the sparsebundle that TM made.. Make sure TM is not running when the files are being copied.

Similar Messages

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

I think things would have been better without this icloud mess...... someone help me like it again. 1). i have more than 1 account set up with icloud. so i deleted 1 account from the settings on my iphone to try and switch to the other account and ever

i think things would have been better without this icloud mess......
someone help me like it again.
1). i have more than 1 account set up with icloud. so i deleted 1 account from the settings on my iphone to try and switch to the other account and everything became a huge mess. (on my iphone i LOST some of my contacts, all of my reminders are gone, and nothing is showing up on the ical on my iphone, and only some notes are showing).......
2). everything is still shown on my macbook pro.... but when i tired to go and sync it..... nothing is transfering to my phone........
3). when i log into the 2 icloud accounts i have with icloud(.com) nothing is showing up in there also......
whats is going on..... this is a huge mess for me. i want to go back the way is was like 1-2 years ago. when you can just sync things from the computer to the phone and not have to go through icloud....... ive been struggling with icloud but today just me hate it to the max.
ANY HELP ON HOW I CAN FIX ALL OF THIS.....
THANK YOU VERY MUCH!

the version im using is 10.7.5
im not sure what you mean by you second statement. when i open those application on my macbook its on my macbook but when i sign into icloud. i have those option selected.
maybe my problem is im using the wrong ID...... lol.
is there away you can delete or change icloud accounts/ ID's???

HT5622 Can I have more than one apple id associated with my itunes

Can I have more than one apple id associated with my itunes

Yes.
You can authorize a computer for up to 5 accounts, I believe

Search for a file with part of a filename in a given folder.

How can I search for a file with part of a filename in a given folder?
Or can I change the columns in Advanced Search so that the heading is filename?

thanks, Michel. it had occurred to me to put a scratch tag on the folder, but I was hoping for an easier way. in future I'll do as you suggest though, because it's easier than what I have been doing.
daryl

Cannot insert more than 1 WSUS update source with different unique ids

Hello LnG
I am aware that are a whole bunch of forum threads on this error however little bit of additional help would be of great help, as I have nearly tracked this 'pain' down.
Our environment: SCCM 2007 R3
1 Central
15 Primaries and a whole bunch of secondaries
Single WSUS server
OK, so we have just taken handover of this new account and still getting a hang of the creek and corners in the environment. We have about 1000 machines sitting in "Failed to download updates" state. Error
= 0x80040694
WUAHandler.log:
Its a WSUS Update Source type ({A2762CA9-9739-4260-9C3A-DC4B36122E16}), adding it
Cannot insert more than 1 WSUS update source with different unique ids
Failed to Add Update Source for WUAgent of type (2) and id ({A2762CA9-9739-4260-9C3A-DC4B36122E16}). Error = 0x80040694.
Its a WSUS Update Source type ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}), adding it
Existing WUA Managed server was already set (http://WSUSServername:8530), skipping Group Policy registration.
Added Update Source ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}) of content type: 2
WUAHandler
Async searching of updates using WUAgent started.
Checked the
CI_UpdateSources table and found 2 Update sources unique ids:
{BCB9D60B-2668-459B-BFFD-6DDD11AADC53} Date Created 2011-01-11 03:47:52.000/Date Modified 2011-01-11 03:47:52.000
and
{A2762CA9-9739-4260-9C3A-DC4B36122E16} Date Created 2014-07-09 02:48:46.000 / Date Modified 2014-07-09 02:48:46.000
My questions:
Can I rely on the last modified/created date for inactive update source and delete it off the database? in this case can I delete {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}?
When i browsed to the registry location on the Central Server
HKLM\Software\Wow6432Node\Microsoft\SMS\Components\SMS_WSUS_SYNC_MANAGER i saw the update source as {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}.
Does it imply that a stale record?
Any help/guidance will be much appreciated :)

Well!! My wsyncmgr.log says this:
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX1 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX2 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX3 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX4 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX5to 1
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX6 to 18
So, this is an active update source! ?? I cannnot uninstall and reinstall SUP currently. Any thoughts?? Any ody?

Restrict email attachments if more than 1mb for internal and 250kb for external emails

Hi,
Restrict email attachments if more than 1mb for internal and 250kb for external emails ?
Can any one help me in this issue
Thanks
Deepan.T

Hi Deepan,
You can use transport rule to restrict the attachment size.
I use the following transport rule to reject the attachment size over 2MB with "5.7.1" information returned.
New-TransportRule "block large attach" -AttachmentSizeOver 2MB -RejectMessageEnhancedStatusCode "5.7.1"
For more information, here is an article for your reference.
New-TransportRule
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Using Log4j for writing files

Hello,
Is possible to use log4j for writing files?
For example:
I have an application that produce several report txt files is possible at runtime produce them using log4j features?
Thanks

Did you ever got an answer for this??? I'm starting a new project with ORACLE 9i and the site have a NAS. It will be very helpfull to know if it's possible and how can it be done.
Thank you,
Ulises Feliciano Troche
GIS Analyst
GMT

How to load and unload more than one external swf files in different frames?

I do not have much experience on Adobe Flash or Action Script 3, but I know the basics.
I am Arabic language teacher, and I design an application to teach Arabic, I just would like to learn how to load and unload more than one external swf files in different frames.
Thanks

Look into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.

Directory for archiving files with errors

HI ,
My Scenario is file to RFC Asynch.
when ever the PI picks file from the source directory that file need to delete from the path and need to be archived to some other patch.
And if the file has wrong data it need to archive to error archive folder.
For this I used Archive processing in filesender adapter and I also used directory for archiving files with errors(for wrong data files).
Now the files are arching successfully in the given archive folder for successful messages. But the error files (wrong data which are throwing mapping error in MONI) are also archiving in the same archive folder.
But these error files need to archive in error archive folder.
How can I achieve this?
Thanks in Adv..
Vankadoath.

you can use raja's logic ..........in addition in second receiver do a simple mapping UDF to delete the file from the SUCCESS folder. otherwise your file will be archived in both the folder success and errror
see this code.
DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
*File f1 = new File("/usr/sap/XX/"+keyFileName1);*
*boolean success = f1.delete();*
*if (!success){*
*System.out.println("Deletion failed.");*
*System.exit(0);*
*}else{*
*System.out.println("File deleted.");*

Is there more than one "Previous recipients" file?

Ancient addresses long deleted from my address book continue to populate emails.
I have done the Window --> Previous recipients thing. (I really have!) The ancient addresses are not there to delete!
I'm wondering if there is more than one "Previous recipients" file?
Any help appreciated -
Thanks!

OK. So these phantom email addresses belonged to you and not other people. Correct? Yes
Were they aliases to accounts you still have or were they old accounts you have since deleted? Explain what the phantom addresses were. These addresses belong to a POP account I have through work. I've used a couple of different addresses: e.g. roberta@ or redowney@ but the domain name has not changed. I'm going to see if the addresses are on my employer's server. Stay tuned.
Have you checked Messages and FaceTime to see if those addresses are listed there? Just checked - not there.
If you have an iPhone or iPad, when you start a new message, do these phantom addresses appear in the list? If so, do they have a circle i icon to the right of the address? If so, click the icon and delete it from there. Nope - do not appear.
These addresses are really old - like two or three years since I last used.

Writing files with Eclipse over gvfs ends in empty files

Hello,
I'm using gvfs to mount folders from our development server. I'm accessing these folders directly with Eclipse. Everything went fine until the last gnome update. Now writing files with Eclipse ends in writing empty files, but there aren't any errors. Eclipse still shows the content of the files until i reopen them.
When i'm writing files with other apps (vim, gedit) everything works normally?
Does anybody have any suggestions?
Thx

Hello,
I'm using gvfs to mount folders from our development server. I'm accessing these folders directly with Eclipse. Everything went fine until the last gnome update. Now writing files with Eclipse ends in writing empty files, but there aren't any errors. Eclipse still shows the content of the files until i reopen them.
When i'm writing files with other apps (vim, gedit) everything works normally?
Does anybody have any suggestions?
Thx

[svn] 3739: Fixing recent change to prelink to not run more than once for compc.

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Why do i have to pay more than once for my purchased album in itunes, when i download them again?

why do i have to pay more than once for my purchased album in itunes, when i download them again?

Probably because you purchased them again, instead of following the proper method for redownloading apps.
Downloading past purchases from the App Store ... - Support - Apple

No more than 8Mbps for writing files with TC !

Similar Messages

Maybe you are looking for