No more virtual tiles can be allocated

Just installed PSE13 x64 on Windows 8.1. When attempting to select "Correct camera distortion" from the filter menu, I immediately got the error "no more virtual tiles can be allocated". I checked, and my scratch disk was set to an SSD with 53Gb of free space. Allocated a second slower HDD scratch disk with 2Tb of free space and the error disappeared. I'm rather surprised that 53Gb was considered insufficient scratch space. The image I was attempting to correct was a 16 megapixel DNG from my Ricoh GR that I had just opened through Camera Raw.

I had this on my Win 7 x64 machine. Just found a solution/workaround.
This machine had a single partition/logical drive C: and so was the swap location. The problem was circumvented by running in Admin mode but this causes other issues with registry and the IT team if you have to listen to one.
I stopped the error.
But all I did was shrink my main partition and add a small partition so I have two local physical drives.
Now understand I did NOT tell PS to use that drive for anything. But it does create a temp file on the new logical drive call "300017921_MVM_0.tmp" when I do a distort lens correction.
Very interesting. It NEEDS a second drive, and uses it without being told.
https://www.adobe.com/cfusion/entitlement/index.cfm?e=ca&returnurl=http://forums.adobe.com /adobe_login&loc=en

Similar Messages

  • "No more virtual tiles can be allocated" error message

    This posting was made in April of last year but I can't reply to it so I'll post it all over again.
    I just installed CS3 and I get the error message "No more virtual tiles can be allocated" when I try to run certain filters like most of the "sketch" ones.
    I've tried to increase the memory usage to 1380MB (80%), Cache levels to 8 and I still get the error.
    What's a virtual tile and how can I allocate more?

    I had this on my Win 7 x64 machine. Just found a solution/workaround.
    This machine had a single partition/logical drive C: and so was the swap location. The problem was circumvented by running in Admin mode but this causes other issues with registry and the IT team if you have to listen to one.
    I stopped the error.
    But all I did was shrink my main partition and add a small partition so I have two local physical drives.
    Now understand I did NOT tell PS to use that drive for anything. But it does create a temp file on the new logical drive call "300017921_MVM_0.tmp" when I do a distort lens correction.
    Very interesting. It NEEDS a second drive, and uses it without being told.
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=ca&returnurl=http://forums.adobe.com /adobe_login&loc=en

  • When i click on filter gallary a error saying no more virtual tiles can be allocated!

    Hi, when I click ion filter gallery a error pops up saying No more virtual tiles can be allocated.
    I am running the latest version of Photoshop cc 2014
    I have 5 gigs allocated ram to Photoshop
    and enough space on the scratch disks.
    I am running windows 7.
    please help.
    every thing else works fine on it though. o.o

    Following on from yesterday, I realise why I'm getting this error. See I believe this is a bug. Incompatibility with MS UAC.
    Is this a possible cause of your problem ?

  • The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting th

    The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
    The problem does not appear, if PH Elements 13 is executed in the administrator mode.
    The available computer resources are rather  large enough: CPU INTEL i7 4 cores,  16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
    Please, advice how to solve this problem? Maybe, there is patch or updating available?

    Dear n_pane,
    Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
    The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
    I wish you all the best in the New Year 2015!

  • Error: No more virtual tiles can be allocated

    Hello all
    When using the following filters in Photoshop CS6 all updated installed:
    Adaptive Wide Angle
    Lens Correction
    I get the following error:
    No more virtual tiles can be allocated.
    I have 8 GB of RAM and 100 GB free on my only partition and a GeForce 880 FX graphics card.
    For this test I am using a small 2 MB 1000x500 px jpeg image. But I tried with a lot of different images.
    I already deleted the Photoshop settings and played around with the performance settings.
    Any tips?
    Thank you alot!

    Thank you!
    I am running Windows 8 with the latest updates and Photoshop CS6 with the lates updated aswell. Precice system specs you will find below.
    I closed all foreground and background programs and had only photoshop open.
    Also I played around with the performance settings in Photoshop, also disabling GPU acceleration, without any success.
    Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130306-1502)
    Processor: Intel(R) Core(TM) i7 CPU       Q 820  @ 1.73GHz (8 CPUs), ~1.7GHz
    Memory: 8192MB RAM
    Page File: 3318MB used, 12996MB available
    Card name: NVIDIA Quadro FX 880M
    Display Memory: 4562 MB
    Dedicated Memory: 978 MB
    Shared Memory: 3583 MB
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 1729 MHz
    Built-in memory: 8124 MB
    Free memory: 5337 MB
    Memory available to Photoshop: 7149 MB
    Memory used by Photoshop: 63 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: Quadro FX 880M/PCIe/SSE2

  • Anti Shake error message - no more virtual tiles can be allocated - how do I fix this - happens with all images - has worked in past

    How do I fix this - it started today though I haven't used it in some time.
    Anyone know why - how to fix it  no more virtual tiles can be allocated

    When that message came up, you had less than half a gig of disk space left (because that is what can trigger the message).  After closing the filter, the space in use was freed - but while running the filter, you did not have enough disk space + RAM to complete the operation, hence the message.

  • "No new virtual tiles can be allocated" on Windows 7

    I get a error when opening the filter gallery:
    in dutch: "U kunt niet meer virtuele tegels toewijzen." this is the same as the english "No new virtual tiles can be allocated"
    as administrator everything works fine, but then I cannot to my network drives.
    so room on C is not the problem.
    I will not disable UAC
    >> when writing this, I have found the solution (for me): I have also a D: drive, when I set "my User" can create files on the Root of D: everything works.
    so I think this is an error "bug" in the code of the filters, that they do not use the same Temp space directory. ("D:\temp\" for PS)
    and why can you not set the temp directory in the settings but only the drives PS can use?
    please be aware of that this problem that is very old (when goolge on the error) is still be actual (I'm a new user of CC so I use the newest up-to-date version)

    Usually means you're out of scratch disk space.
    And that feature wasn't even introduced until Photoshop CC.

  • "No new virtual tiles can be allocated" when trying shake reduction filter means what?

    Select a raw dng image in LR 5 and right-click to edit in Photoshop CC.
    Then, following the steps in all the video tutorials, choose Filter->Sharpen->Shake Reduction.
    Viola, you will receive an error message "No new virtual tiles can be allocated".
    Does this feature work on the latest released CC?
    Here is my system info:
    Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3606 MHz
    Built-in memory: 16068 MB
    Free memory: 10304 MB
    Memory available to Photoshop: 14395 MB
    Memory used by Photoshop: 60 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2 AMD-APP (1124.2)
    OpenGL Version: 3.0
    Video Rect Texture Size: 16384
    OpenGL Memory: 3369 MB
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: AMD FirePro W7000 (FireGL V)
    Display: 3
    Display Bounds: top=-513, left=2560, bottom=2047, right=4000
    Display: 2
    Display Bounds: top=0, left=0, bottom=1440, right=2560
    Display: 1
    Display Bounds: top=0, left=-2560, bottom=1440, right=0
    Video Card Number: 2
    Video Card: AMD FirePro W7000 (FireGL V)
    Driver Version: 12.104.2.0
    Driver Date: 20130520000000.000000-000
    Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Video Mode: 2560 x 1440 x 4294967296 colors
    Video Card Caption: AMD FirePro W7000 (FireGL V)
    Video Card Memory: 4095 MB
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 9.17.10.2867
    Driver Date: 20120926000000.000000-000
    Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
    Video Mode:
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2304 MB
    Serial number: 90970358024246943983
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
    Temporary file path: D:\Users\Ludwig2\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 238.4G, 111.7G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Installed components:
       ACE.dll   ACE 2013/03/19-12:09:02   79.535293   79.535293
       adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
       AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0  
       AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
       AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1768  
       AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
       adobe_caps.dll   Adobe CAPS   7,0,0,21  
       AGM.dll   AGM 2013/03/29-12:09:59   79.536232   79.536232
       ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31  
       aif_core.dll   AIF   5.0   79.534508
       aif_ocl.dll   AIF   5.0   79.534508
       aif_ogl.dll   AIF   5.0   79.534508
       amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
       ARE.dll   ARE 2013/03/19-12:09:02   79.535293   79.535293
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2013/03/19-12:09:02   79.535293   79.535293
       BIBUtils.dll   BIBUtils 2013/03/19-12:09:02   79.535293   79.535293
       boost_date_time.dll   DVA Product   7.0.0  
       boost_signals.dll   DVA Product   7.0.0  
       boost_system.dll   DVA Product   7.0.0  
       boost_threads.dll   DVA Product   7.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.6.30158   2.1.6.30158
       CITThreading.dll   Adobe CITThreading   2.1.6.30158   2.1.6.30158
       CoolType.dll   CoolType 2013/03/19-12:09:02   79.535293   79.535293
       dvaaudiodevice.dll   DVA Product   7.0.0  
       dvacore.dll   DVA Product   7.0.0  
       dvamarshal.dll   DVA Product   7.0.0  
       dvamediatypes.dll   DVA Product   7.0.0  
       dvaplayer.dll   DVA Product   7.0.0  
       dvatransport.dll   DVA Product   7.0.0  
       dvaunittesting.dll   DVA Product   7.0.0  
       dynamiclink.dll   DVA Product   7.0.0  
       ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
       FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
       filter_graph.dll   AIF   5.0   79.534508
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       imslib.dll   IMSLib DLL   7.0.0.37  
       JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1756  
       mediacoreif.dll   DVA Product   7.0.0  
       MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       PatchMatch.dll   PatchMatch 0000/00/00-00:00:00   1.   1.
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CC   CC  
       Plugin.dll   Adobe Photoshop CC   CC  
       PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34  
       PSArt.dll   Adobe Photoshop CC   CC  
       PSViews.dll   Adobe Photoshop CC   CC  
       SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
       ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
       WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
    Required plug-ins:
       3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Accented Edges 14.0
       Adaptive Wide Angle 14.0
       Angled Strokes 14.0
       Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Bas Relief 14.0
       BMP 14.0
       Camera Raw 8.1
       Camera Raw Filter 8.1
       Chalk & Charcoal 14.0
       Charcoal 14.0
       Chrome 14.0
       Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Color Halftone 14.0
       Colored Pencil 14.0
       CompuServe GIF 14.0
       Conté Crayon 14.0
       Craquelure 14.0
       Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Crop and Straighten Photos Filter 14.0
       Crosshatch 14.0
       Crystallize 14.0
       Cutout 14.0
       Dark Strokes 14.0
       De-Interlace 14.0
       Dicom 14.0
       Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Diffuse Glow 14.0
       Displace 14.0
       Dry Brush 14.0
       Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Embed Watermark 4.0
       Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Extrude 14.0
       FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fibers 14.0
       Film Grain 14.0
       Filter Gallery 14.0
       Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fresco 14.0
       Glass 14.0
       Glowing Edges 14.0
       Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Grain 14.0
       Graphic Pen 14.0
       Halftone Pattern 14.0
       HDRMergeUI 14.0
       IFF Format 14.0
       Ink Outlines 14.0
       JPEG 2000 14.0
       Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Lens Blur 14.0
       Lens Correction 14.0
       Lens Flare 14.0
       Liquify 14.0
       Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mezzotint 14.0
       Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mosaic Tiles 14.0
       Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Neon Glow 14.0
       Note Paper 14.0
       NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Ocean Ripple 14.0
       Oil Paint 14.0
       OpenEXR 14.0
       Paint Daubs 14.0
       Palette Knife 14.0
       Patchwork 14.0
       Paths to Illustrator 14.0
       PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Photocopy 14.0
       Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Pinch 14.0
       Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Plaster 14.0
       Plastic Wrap 14.0
       PNG 14.0
       Pointillize 14.0
       Polar Coordinates 14.0
       Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Poster Edges 14.0
       Radial Blur 14.0
       Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Read Watermark 4.0
       Reticulation 14.0
       Ripple 14.0
       Rough Pastels 14.0
       Save for Web 14.0
       ScriptingSupport 14.0
       Shake Reduction 14.0
       Shear 14.0
       Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Smart Blur 14.0
       Smudge Stick 14.0
       Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Spatter 14.0
       Spherize 14.0
       Sponge 14.0
       Sprayed Strokes 14.0
       Stained Glass 14.0
       Stamp 14.0
       Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Sumi-e 14.0
       Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Targa 14.0
       Texturizer 14.0
       Tiles 14.0
       Torn Edges 14.0
       Twirl 14.0
       Underpainting 14.0
       Vanishing Point 14.0
       Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Water Paper 14.0
       Watercolor 14.0
       Wave 14.0
       Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Wind 14.0
       Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       ZigZag 14.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

    Usually means you're out of scratch disk space.
    And that feature wasn't even introduced until Photoshop CC.

  • Filter for reducing wiggly photos shows no more virtual tiles can be added

    Laptop: Lenovo W 701, 32 GB RAM
    Photoshop-Version: CC 2014.2.1 (64 Bit)
    When I try to activate the filter to reduce wiggly photos, the current photoshop-Version Shows an error-message:
    "No more virtual tiles can be added".
    In Prior Versions of Photoshop CC I could use the filter. But now it's not possible any more.
    Also small photos Show the error and RAM is free.
    Please can you help!!!
    Thanks a lot,
    Klaus

    Usually means you're out of scratch disk space.
    And that feature wasn't even introduced until Photoshop CC.

  • No More Virtual Tiles Issue

    I am currently running as adminitrator, I can open an image, edit it, save and close it. Then I open a second image to edit and I get "No more virtual tiles can be allocated" BUT if I close out of the entire program and reopen, I can edit. This is a tedious way to work. Is there something I can do to have the program run normally so I wont have to open and close the program for each indiviudal image I want to edit? I am working in Photoshop CS6 Extened on a PC with windows 8 if that has any influence..Thank you!

    And how much RAM does it have? What are your settings for the PS swap file? The system page file? What images? What operations/ tools/ functions? Running out of memory can have all sorts of reasons. Your info si simply incomplete and insufficient.
    Mylenium

  • Error: The largest virtual disk that can be allocated is: 0 MB.

    hi, when a create a new virtual machine, Oracle VM Manager gives the following error:
    Error: The largest virtual disk that can be allocated is: 0 MB.
    I have enought disk space in all partitions on VM Server.
    Has anyone solved this??... How to ....
    Regards from Chile (and sorry for my poor english)
    RENÉ FELIPE VIANCOS S.
    Director / IT Manager
    CENTRO DE INFORMÁTICA Y COMPUTACIÓN
    (Informatics and Computing Center)
    UNIVERSIDAD DE LA SERENA
    www.userena.cl
    Message was edited by:
    user621885

    ok, i have changed for a new machine, and the error persists
    Step (1), and the output of virt-install is:
    [root@ovm21 winxpue5]# virt-install
    Would you like a fully virtualized guest (yes or no)? This will allow you to run unmodified operating systems. yes
    What is the name of your virtual machine? winkkxp
    How much RAM should be allocated (in megabytes)? 1000
    What would you like to use as the disk (path)? winkkxp
    How large would you like the disk (winkkxp) to be (in gigabytes)? 5000
    Would you like to enable graphics support? (yes or no) yes
    What would you like to use for the virtual CD image? /OVS/iso_pool/winxpue5/winxpue5.iso
    Starting install...
    libvir: Xen Daemon error : GET operation failed:
    Traceback (most recent call last):
    File "/usr/sbin/virt-install", line 476, in ?
    main()
    File "/usr/sbin/virt-install", line 440, in main
    dom = guest.start_install(conscb)
    File "/usr/lib/python2.4/site-packages/virtinst/XenGuest.py", line 379, in start_install
    self._create_devices()
    File "/usr/lib/python2.4/site-packages/virtinst/XenGuest.py", line 281, in createdevices
    disk.setup()
    File "/usr/lib/python2.4/site-packages/virtinst/XenGuest.py", line 96, in setup
    os.write(fd, '\x00')
    OSError: [Errno 28] No space left on device
    here is the df command output
    S.ficheros Tamaño Usado Disp Uso% Montado en
    /dev/sda2 3,0G 718M 2,1G 26% /
    /dev/sda3 108G 755M 107G 1% /OVS
    /dev/sda1 99M 24M 70M 26% /boot
    tmpfs 257M 0 257M 0% /dev/shm
    all filesystems have enought disk space....
    Here is the content of the xend.log:
    [2008-03-09 21:48:35 2534] INFO (SrvDaemon:331) Xend Daemon started
    [2008-03-09 21:48:35 2534] INFO (SrvDaemon:335) Xend changeset: unavailable.
    [2008-03-09 21:48:35 2534] INFO (SrvDaemon:342) Xend version: Unknown.
    [2008-03-09 21:48:35 2534] DEBUG (XendDomainInfo:132) XendDomainInfo.recreate({'max_vcpu_id': 1, 'cpu_time': 9577805624L, 'ssidref': 0, 'hvm': 0, 'shutdown_reason': 0, 'dying': 0, 'online_vcpus': 2, 'domid': 0, 'paused': 0, 'crashed': 0, 'running': 1, 'maxmem_kb': 4294967292L, 'shutdown': 0, 'mem_kb': 524288L, 'handle': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0], 'blocked': 0, 'name': 'Domain-0'})
    [2008-03-09 21:48:35 2534] INFO (XendDomainInfo:148) Recreating domain 0, UUID 00000000-0000-0000-0000-000000000000. at /local/domain/0
    [2008-03-09 21:48:35 2534] DEBUG (XendDomainInfo:2069) Storing VM details: {'on_xend_stop': 'ignore', 'shadow_memory': '0', 'uuid': '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart', 'image': '(linux (kernel ))', 'on_poweroff': 'destroy', 'on_xend_start': 'ignore', 'on_crash': 'restart', 'xend/restart_count': '0', 'vcpus': '2', 'vcpu_avail': '3', 'name': 'Domain-0'}
    [2008-03-09 21:48:35 2534] DEBUG (XendDomainInfo:907) Storing domain details: {'name': 'Domain-0', 'console/limit': '1048576', 'memory/target': '524288', 'vm': '/vm/00000000-0000-0000-0000-000000000000', 'domid': '0', 'cpu/0/availability': 'online', 'cpu/1/availability': 'online', 'control/platform-feature-multiprocessor-suspend': '1'}
    [2008-03-09 21:48:35 2534] DEBUG (XendDomain:434) Adding Domain: 0
    [2008-03-09 21:48:35 2534] DEBUG (XendDomain:379) number of vcpus to use is 0
    [2008-03-09 21:48:35 2534] INFO (SrvServer:180) unix path=/var/lib/xend/xend-socket
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VBD.set_device not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VBD.set_type not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VM.get_auto_power_on not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VM.set_auto_power_on not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: debug.get_all not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: console.get_other_config not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: console.set_other_config not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VIF.get_network not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VIF.set_device not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VIF.set_MAC not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: VIF.set_MTU not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: session.get_all_records not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: event.get_record not found
    [2008-03-09 21:48:35 2534] WARNING (XendAPI:672) API call: event.get_all not found
    [2008-03-09 21:48:35 2534] DEBUG (XendDomainInfo:991) XendDomainInfo.handleShutdownWatch
    [2008-03-09 21:48:38 2534] INFO (XMLRPCServer:149) Opening Unix domain socket XML-RPC server on /var/run/xend/xen-api.sock; authentication has been disabled for this server.
    [2008-03-09 21:48:38 2534] INFO (XMLRPCServer:149) Opening Unix domain socket XML-RPC server on /var/run/xend/xmlrpc.sock.
    Step(2) rpc output:
    [root@ovm21 winxpue5]# /opt/ovs-agent-2.2/utils/do_rpc.py https://admin:[email protected]:8899 get_free_space
    get_free_space []
    socket error! code=104, msg=Connection reset by peer
    [root@ovm21 winxpue5]# /opt/ovs-agent-2.2/utils/do_rpc.py https://system:[email protected]:8899 get_free_space
    get_free_space []
    socket error! code=104, msg=Connection reset by peer
    [root@ovm21 winxpue5]# /opt/ovs-agent-2.2/utils/do_rpc.py https://sys:[email protected]:8899 get_free_space
    get_free_space []
    socket error! code=104, msg=Connection reset by peer
    my password for whole system is 'oracle'
    some ideas ????
    Regards
    René Felipe Viancos.

  • Adding more virtual hosts in Apache

    Hi, When I want to add more virtual hosts to Apache in XAMPP. How does the code looks. Can some one please give an example with 3 virtual hosts.
    Windows Vista 32.
    Is it only adding:      <VirtualHost *:80>
                                  DocumentRoot c:/vhosts/siteA
                                  ServerName siteA
                                  </VirtualHost>
                                  <VirtualHost *:80>
                                  DocumentRoot c:/vhosts/siteB
                                  ServerName siteB
                                  </VirtualHost>                 
                                  <VirtualHost *:80>
                                  DocumentRoot c:/vhosts/siteC
                                  ServerName siteC
                                  </VirtualHost>
    Thanks!

    As it says in step 3 of my tutorial:
    On a separate line, enter 127.0.0.1, followed by some space and the name of the virtual host you want to register. For instance, to set up a virtual host called phpdw, enter the following:
    127.0.0.1   phpdw
    So, if you already have this:
    127.0.0.1     localhost
    ::1           localhost
    It become this:
    127.0.0.1     localhost
    ::1           localhost
    127.0.0.1     phpdw

  • The operation can't be completed because one or more required items can't be found. (Error code -43)

    When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
    The operation can’t be completed because one or more required items can’t be found.
    (Error code -43)
    I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

    I get an error -36.
    I did the dot_clean in the terminal.
    Did not fix it.

  • I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

    I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

    Post in Microsoft's Powerpoint (Mac) message boards.

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

Maybe you are looking for

  • Bugs on iPad Photo application - Faces

    I have discovered a bug on my iPad's Photo application of the Faces. For some faces, the preview has the zoomed-in face of the person, which is normal. However, for the new faces which I have added on my Mac, the preview of the face is the whole phot

  • PhaseListener doesn't return image

    Hi Experts, I have a JackRabbit content repository in my web application which contains some of the images that need to be rendered. In order to do this I decided to map a URL pattern to a PhaseListener, which will on receiving such a request load th

  • Print PDF via online subscription direct

    How can you create a PDF using adobe online subscription directly from the "print" function?

  • How to solve error code 150:30?

    Restarting my computer does not solve the error code 150:30, licensing problem. Any suggestions?

  • Unable to run graph on report server

    i am unable to run the graph on report server i have added the XML code from http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/additems/add_graph_jsp.htm Adding a graph to a JSP-based Web report but it