No More Virtual Tiles Issue
I am currently running as adminitrator, I can open an image, edit it, save and close it. Then I open a second image to edit and I get "No more virtual tiles can be allocated" BUT if I close out of the entire program and reopen, I can edit. This is a tedious way to work. Is there something I can do to have the program run normally so I wont have to open and close the program for each indiviudal image I want to edit? I am working in Photoshop CS6 Extened on a PC with windows 8 if that has any influence..Thank you!
And how much RAM does it have? What are your settings for the PS swap file? The system page file? What images? What operations/ tools/ functions? Running out of memory can have all sorts of reasons. Your info si simply incomplete and insufficient.
Mylenium
Similar Messages
-
"No more virtual tiles can be allocated" error message
This posting was made in April of last year but I can't reply to it so I'll post it all over again.
I just installed CS3 and I get the error message "No more virtual tiles can be allocated" when I try to run certain filters like most of the "sketch" ones.
I've tried to increase the memory usage to 1380MB (80%), Cache levels to 8 and I still get the error.
What's a virtual tile and how can I allocate more?I had this on my Win 7 x64 machine. Just found a solution/workaround.
This machine had a single partition/logical drive C: and so was the swap location. The problem was circumvented by running in Admin mode but this causes other issues with registry and the IT team if you have to listen to one.
I stopped the error.
But all I did was shrink my main partition and add a small partition so I have two local physical drives.
Now understand I did NOT tell PS to use that drive for anything. But it does create a temp file on the new logical drive call "300017921_MVM_0.tmp" when I do a distort lens correction.
Very interesting. It NEEDS a second drive, and uses it without being told.
https://www.adobe.com/cfusion/entitlement/index.cfm?e=ca&returnurl=http://forums.adobe.com /adobe_login&loc=en -
No more virtual tiles can be allocated
Just installed PSE13 x64 on Windows 8.1. When attempting to select "Correct camera distortion" from the filter menu, I immediately got the error "no more virtual tiles can be allocated". I checked, and my scratch disk was set to an SSD with 53Gb of free space. Allocated a second slower HDD scratch disk with 2Tb of free space and the error disappeared. I'm rather surprised that 53Gb was considered insufficient scratch space. The image I was attempting to correct was a 16 megapixel DNG from my Ricoh GR that I had just opened through Camera Raw.
I had this on my Win 7 x64 machine. Just found a solution/workaround.
This machine had a single partition/logical drive C: and so was the swap location. The problem was circumvented by running in Admin mode but this causes other issues with registry and the IT team if you have to listen to one.
I stopped the error.
But all I did was shrink my main partition and add a small partition so I have two local physical drives.
Now understand I did NOT tell PS to use that drive for anything. But it does create a temp file on the new logical drive call "300017921_MVM_0.tmp" when I do a distort lens correction.
Very interesting. It NEEDS a second drive, and uses it without being told.
https://www.adobe.com/cfusion/entitlement/index.cfm?e=ca&returnurl=http://forums.adobe.com /adobe_login&loc=en -
When i click on filter gallary a error saying no more virtual tiles can be allocated!
Hi, when I click ion filter gallery a error pops up saying No more virtual tiles can be allocated.
I am running the latest version of Photoshop cc 2014
I have 5 gigs allocated ram to Photoshop
and enough space on the scratch disks.
I am running windows 7.
please help.
every thing else works fine on it though. o.oFollowing on from yesterday, I realise why I'm getting this error. See I believe this is a bug. Incompatibility with MS UAC.
Is this a possible cause of your problem ? -
The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
The problem does not appear, if PH Elements 13 is executed in the administrator mode.
The available computer resources are rather large enough: CPU INTEL i7 4 cores, 16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
Please, advice how to solve this problem? Maybe, there is patch or updating available?Dear n_pane,
Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
I wish you all the best in the New Year 2015! -
How do I fix this - it started today though I haven't used it in some time.
Anyone know why - how to fix it no more virtual tiles can be allocatedWhen that message came up, you had less than half a gig of disk space left (because that is what can trigger the message). After closing the filter, the space in use was freed - but while running the filter, you did not have enough disk space + RAM to complete the operation, hence the message.
-
Error: No more virtual tiles can be allocated
Hello all
When using the following filters in Photoshop CS6 all updated installed:
Adaptive Wide Angle
Lens Correction
I get the following error:
No more virtual tiles can be allocated.
I have 8 GB of RAM and 100 GB free on my only partition and a GeForce 880 FX graphics card.
For this test I am using a small 2 MB 1000x500 px jpeg image. But I tried with a lot of different images.
I already deleted the Photoshop settings and played around with the performance settings.
Any tips?
Thank you alot!Thank you!
I am running Windows 8 with the latest updates and Photoshop CS6 with the lates updated aswell. Precice system specs you will find below.
I closed all foreground and background programs and had only photoshop open.
Also I played around with the performance settings in Photoshop, also disabling GPU acceleration, without any success.
Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130306-1502)
Processor: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz (8 CPUs), ~1.7GHz
Memory: 8192MB RAM
Page File: 3318MB used, 12996MB available
Card name: NVIDIA Quadro FX 880M
Display Memory: 4562 MB
Dedicated Memory: 978 MB
Shared Memory: 3583 MB
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1729 MHz
Built-in memory: 8124 MB
Free memory: 5337 MB
Memory available to Photoshop: 7149 MB
Memory used by Photoshop: 63 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro FX 880M/PCIe/SSE2 -
Filter for reducing wiggly photos shows no more virtual tiles can be added
Laptop: Lenovo W 701, 32 GB RAM
Photoshop-Version: CC 2014.2.1 (64 Bit)
When I try to activate the filter to reduce wiggly photos, the current photoshop-Version Shows an error-message:
"No more virtual tiles can be added".
In Prior Versions of Photoshop CC I could use the filter. But now it's not possible any more.
Also small photos Show the error and RAM is free.
Please can you help!!!
Thanks a lot,
KlausUsually means you're out of scratch disk space.
And that feature wasn't even introduced until Photoshop CC. -
Re: [iPlanet-JATO] More on ComputedColumn issue
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jspTodd,
Sorry for the delay with the answer, I've tried to obtain JATO 1.2
and repeat the project migration to verify whether version 1.2 solves
my problem or not (actually, it is a pilot sub-project).
Unfortunately, I still have no 1.2 version.
Let me try to answer on your question without getting the results
with JATO 1.2. Your explanation sounds like version 1.2 is very close
to solve the problem. Actually, our situation is easier because we
have SELECT object only, not SELECT and UPDATE. For data integrity
the only 'Select' ND's do(s) have been used through the whole
project. The backend communication (update, delete) is provided via
EJB like (entity) Java classes.
My question is: could I define synthetic field with 1.1.1 version. By
the way, word synthetic reflects the possibility to construct the
field under certain SQL circumstances (SELECT, UPDATE, e.g.) or the
possibility to construct a `fake' field (for example,
CountColumn of a do) as well. If the later is true, could you please
give a brief idea how to create this synthetic field.
After the translation in the doPriorityCountModelImpl class we've
got:
public static final String COLUMN_DFPRIORITYDESC="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYDESC=".";
public static final String COLUMN_DFPRIORITYCOUNT="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYCOUNT=".";
(see my original post please with details, as well).
If this is not a problem for 1.2 please do not waste your time to fix
it for 1.1.1. I need to repeat my results with the version 1.2 anyway.
We have a number of similar idioms through the project. In this
particular case, the CountColumn that counts the field from another
table may bring problem for manual adjustment (see my original
notes). The whole SQL query is as follows (for this case):
SELECT MIN(MOS.PRIORITY.PDESCRIPTION),
COUNT(ASSIGNEDTASKSWORKQUEUE.PRIORITYID),
MOS.PRIORITY.PRIORITYID
FROM MOS.ASSIGNEDTASKSWORKQUEUE, MOS.PRIORITY, MOS.DEAL
WHERE MOS.DEAL.SCENARIORECOMMENDED = 'Y'
AND MOS.DEAL.COPYTYPE <> 'T'
GROUP BY MOS.PRIORITY.PRIORITYID
ORDER BY MOS.PRIORITY.PRIORITYID ASC
During the pre-handler activity (it is the part of our Object
Framework on the top of Netdynamics Object Framework) system passes
id (and mos.deal.dealid = XXX) to the do (select query). After the
run-time execution of this do the results are displayed on the screen
bind to the repeatable statics.
Thank you very much,
Vladimir
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem
added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;...........................................
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;............................................
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND
MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
$be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
if ($be -eq $null)
new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
. "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
" was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
"No new virtual tiles can be allocated" on Windows 7
I get a error when opening the filter gallery:
in dutch: "U kunt niet meer virtuele tegels toewijzen." this is the same as the english "No new virtual tiles can be allocated"
as administrator everything works fine, but then I cannot to my network drives.
so room on C is not the problem.
I will not disable UAC
>> when writing this, I have found the solution (for me): I have also a D: drive, when I set "my User" can create files on the Root of D: everything works.
so I think this is an error "bug" in the code of the filters, that they do not use the same Temp space directory. ("D:\temp\" for PS)
and why can you not set the temp directory in the settings but only the drives PS can use?
please be aware of that this problem that is very old (when goolge on the error) is still be actual (I'm a new user of CC so I use the newest up-to-date version)Usually means you're out of scratch disk space.
And that feature wasn't even introduced until Photoshop CC. -
"No new virtual tiles can be allocated" when trying shake reduction filter means what?
Select a raw dng image in LR 5 and right-click to edit in Photoshop CC.
Then, following the steps in all the video tutorials, choose Filter->Sharpen->Shake Reduction.
Viola, you will receive an error message "No new virtual tiles can be allocated".
Does this feature work on the latest released CC?
Here is my system info:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3606 MHz
Built-in memory: 16068 MB
Free memory: 10304 MB
Memory available to Photoshop: 14395 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1124.2)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 3369 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD FirePro W7000 (FireGL V)
Display: 3
Display Bounds: top=-513, left=2560, bottom=2047, right=4000
Display: 2
Display Bounds: top=0, left=0, bottom=1440, right=2560
Display: 1
Display Bounds: top=0, left=-2560, bottom=1440, right=0
Video Card Number: 2
Video Card: AMD FirePro W7000 (FireGL V)
Driver Version: 12.104.2.0
Driver Date: 20130520000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: AMD FirePro W7000 (FireGL V)
Video Card Memory: 4095 MB
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 9.17.10.2867
Driver Date: 20120926000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
Video Mode:
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2304 MB
Serial number: 90970358024246943983
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: D:\Users\Ludwig2\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 238.4G, 111.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/03/19-12:09:02 79.535293 79.535293
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/03/03-12:10:08 5.0.13 79.533484
AdobePDFL.dll PDFL 2013/03/13-12:09:15 79.499517 79.499517
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1768
AdobeXMP.dll Adobe XMP Core 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPFiles.dll Adobe XMP Files 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPScript.dll Adobe XMP Script 2013/03/13-12:09:15 79.151481 79.151481
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/03/29-12:09:59 79.536232 79.536232
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50) 1.000000
ARE.dll ARE 2013/03/19-12:09:02 79.535293 79.535293
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/03/19-12:09:02 79.535293 79.535293
BIBUtils.dll BIBUtils 2013/03/19-12:09:02 79.535293 79.535293
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30158 2.1.6.30158
CITThreading.dll Adobe CITThreading 2.1.6.30158 2.1.6.30158
CoolType.dll CoolType 2013/03/19-12:09:02 79.535293 79.535293
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/03/21-12:10:31 79.535742 79.535742
FileInfo.dll Adobe XMP FileInfo 2013/03/19-12:09:02 79.151561 79.151561
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.37
JP2KLib.dll JP2KLib 2013/02/19-12:28:44 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1756
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/03/15-13:25:52 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 0000/00/00-00:00:00 1. 1.
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.0.1.34
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/03/21-12:10:31 79.535742 79.535742
ScriptUIFlex.dll ScriptUIFlex 2013/03/21-12:10:31 79.535742 79.535742
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Accented Edges 14.0
Adaptive Wide Angle 14.0
Angled Strokes 14.0
Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Bas Relief 14.0
BMP 14.0
Camera Raw 8.1
Camera Raw Filter 8.1
Chalk & Charcoal 14.0
Charcoal 14.0
Chrome 14.0
Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Color Halftone 14.0
Colored Pencil 14.0
CompuServe GIF 14.0
Conté Crayon 14.0
Craquelure 14.0
Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Crop and Straighten Photos Filter 14.0
Crosshatch 14.0
Crystallize 14.0
Cutout 14.0
Dark Strokes 14.0
De-Interlace 14.0
Dicom 14.0
Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Diffuse Glow 14.0
Displace 14.0
Dry Brush 14.0
Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Embed Watermark 4.0
Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Extrude 14.0
FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fibers 14.0
Film Grain 14.0
Filter Gallery 14.0
Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Fresco 14.0
Glass 14.0
Glowing Edges 14.0
Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Grain 14.0
Graphic Pen 14.0
Halftone Pattern 14.0
HDRMergeUI 14.0
IFF Format 14.0
Ink Outlines 14.0
JPEG 2000 14.0
Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Lens Blur 14.0
Lens Correction 14.0
Lens Flare 14.0
Liquify 14.0
Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mezzotint 14.0
Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Mosaic Tiles 14.0
Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Neon Glow 14.0
Note Paper 14.0
NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Ocean Ripple 14.0
Oil Paint 14.0
OpenEXR 14.0
Paint Daubs 14.0
Palette Knife 14.0
Patchwork 14.0
Paths to Illustrator 14.0
PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Photocopy 14.0
Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Pinch 14.0
Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Plaster 14.0
Plastic Wrap 14.0
PNG 14.0
Pointillize 14.0
Polar Coordinates 14.0
Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Poster Edges 14.0
Radial Blur 14.0
Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Read Watermark 4.0
Reticulation 14.0
Ripple 14.0
Rough Pastels 14.0
Save for Web 14.0
ScriptingSupport 14.0
Shake Reduction 14.0
Shear 14.0
Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Smart Blur 14.0
Smudge Stick 14.0
Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Spatter 14.0
Spherize 14.0
Sponge 14.0
Sprayed Strokes 14.0
Stained Glass 14.0
Stamp 14.0
Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Sumi-e 14.0
Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Targa 14.0
Texturizer 14.0
Tiles 14.0
Torn Edges 14.0
Twirl 14.0
Underpainting 14.0
Vanishing Point 14.0
Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Water Paper 14.0
Watercolor 14.0
Wave 14.0
Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
Wind 14.0
Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
ZigZag 14.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Adobe Exchange
Installed TWAIN devices: NONEUsually means you're out of scratch disk space.
And that feature wasn't even introduced until Photoshop CC. -
CS5 save as CS4 makes Large File and sees virtual memory issue
Two CS5 flash files. FileSource 27Mb File Destination 21.8Mb
They open in 80 seconds for each.
FileSource has 15 MovieClips, 5 show areas of the map in a variety of colours, shape intensive one could say ! These are made into one movie clip and copy pasted to the FileDestination. In CS5 it then crashes.
I turned these instead into CS4 files, they open in 10 seconds ! WOW !!! I needed to adjust the text which had become two lines from one though.
I try again for the CopyPaste of the movie Clip from library to library, this time I get a message Flash is out of memory. To increase virtual memory, quit Flash and allocate more virtual memory in the Systems Properties dialog box.
In there I see
Initial 2046Mb
Max size 4092Mb
Recommended 4605Mb
I alter this to:
Initial 3800Mb
Max 4600Mb
Reboot PC (Win XP SP2 wih 4Gb ram, purpose built video editing suite) and try again, but again get the memory message. Such a powerful PC should handle Flash. PC at work also crashing with CS5.
I thought I was winning with the quick handling of the files in CS4 but File size is now alarmingly FileSource 76.1Mb and FileDestination 58.4Mb WHY ? and why does it open them so quick but fall over on the copy paste ?
CS4 opens these in 8 not 80 secs, but that save as CS4 has bloated their file size, quick to open but causing virtual memory failure.
I am defeated
Does CS5 have some way of keeping size down ? I can’t use CS5 as it crashes when pasting the MovieClip from the source file to destination.
Can I get Flash to simplify the layers perhaps ? There are many shapes of the same colour which perhaps could be fused into one, lessening the number of vector edges. How is that done ? I am making an swf file for a clients powerpoint slide show.
EnvirographicsPossible good news. I've been away and hadn't opened DW since also having had a problem with Finder and external drives on my return. When I opened it today, and needed to do a 'Save As' , it did it with no problem of rendering. Though there have been no DW updates, there was updates to PS and ID. So I'll tentatively say the problem has gone away - hopefully for good.
Just editing this post. I happened to turn Live View on etc.. for the first time in a couple of weeks due to the above. I realsied this morning I hadn't turned it on. Now it is just as before when I try to 'Save As' - blank, an then have to close and reopen for it to render (even though the Live View/Live Code is now stiched off).
No I don't know how to turn this thread back into an 'Unanswered' question.
Message was edited by: tgiadd -
AIR for Desktop – Video 'wall' using 'virtual' tiles
Creating a huges video wall- 10x6 ft which is actually 1 large screen and will display a variety of video, pictures and text content. I want to break up the screen using 'virtual' tiles. A variety of approaches will be taken to create transitions, 3d rotation effects, ripple effects etc.
I know I will make ample use of Bitmapdata, rednering my video(s) and loaded images off stage and probably copyPixel or drawRect methods to render my main canvas.
What are some other 'best pratices' I should keep in mind to optimize performance and playback?
What are some general guidelines for video encoding if all video content will be prerendered and played back locally?1.Make sure you understand the big differences between video and stagevideo, its tempting to think that stagevideo is the better videosoultion in any case, but its not.
The best Article (however a little outdated) on the subject is imo: http://www.adobe.com/devnet/flashplayer/articles/stage_video.html
2.In a performance heavy environment the combination stageVideo+greensock might not be the optimal solution, if you have time to reprogram Starling/feathers will probably give you a much better performing combination:
http://forum.starling-framework.org/topic/stagevideo-with-starling-example
3.I don`t know how you encode your Backgroundvideo, there are literally dozens of viable codecs that should differ extremly in how they stress the gpu/cpu. Maybe you have to experiment with a lower than HD resoultion and see if scaling up the background is a good compromise. -
WHY IS IT THAT THE OS UPDATE SCREWS UP THE Z10 MORE THAN RESOLVE ISSUES???????????
Is there a question in there somewhere? reply with caps lock off please. :-)
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Maybe you are looking for
-
Can't get tomoyo (AUR repo linux-tomoyo) to work
Hey there, I've got a little problem with tomoyo. I first tried to install the tomoyo-tools -> Missing dependency: linux-tomoyo. Then I read that tomoyo is already inbuilt in Linux kernel, but disabled by default. So I tried to change this setting -
-
Hi all, Please let me know how to take print outs of Payment Advices. I was trying transaction FBE1 to create payment advices. But the print option is to available here. Also pls let me know how to do Payment advices for F110 also. Thanks & Regards,
-
Linked library in /usr/lib
While upgrading I noticed that a statically linked library doesn't show up in /usr/lib. This is what is supposed to happen: install -Dm644 libdds.a "${pkgdir}/usr/lib/libdds.a" The libdds.a is in ${srcdir}. Another file is correctly moved to ${pkgdir
-
ColdFusion9 & JONAS Webserver (CF settings lost,on webserver is restarted)
Hello, I am using Jonas5.2.0 as web container for my coldfusion application. but once web server is restarted, All the coldfusion settings are lost. this leading to a problem of redeploying of ColdFusion archive everytime when restarting webserver. s
-
Change URL Web page for "Welcome to Oracle Containers"
Would anyone know how I can update the default url http://xyz.com:9704/ To re-direct to http://xyz.com:9704/analytics I also of course want to keep the original page but just put it some where else possibly like save the HTML and give it this URL htt