No Mouse or Keyboard After Installation

Every time I install Arch Linux I have no mouse or keyboard in run level 5. I can ssh into the machine and configure it that way but I have no idea what the problem is...
I have installed the proprietary nVidia Linux graphic drivers and rebooted the machine however nothing allows me to use the keyboard and mouse in GDM/Gnome. I tried to configure the machine to see if I boot in text mode only, if that allows me to use the keyboard however this makes no sense to me because the machine boots into graphical mode however when I look at /etc/inittab, it shows that run level 3 is the default
id:3:initdefault:
Can anyone please tell me what I am doing wrong and or what I need to do in order to enable my Arch Linux machine to use the default Dell USB keyboard and mouse attached to the system...

You could try adding this to your xorg.conf:
Section "ServerFlags"
Option "AutoAddDevices" "false"
EndSection

Similar Messages

Mac mini loses mouse and keyboard after sleep.

Hi Everyone:
I recently bought my Mom one of the new Mac mini (I'm a PowerBook user myself), and she's running into some puzzling problems which, while minor, are sufficiently annoying as to confuse poor old Mom.
The system egnrally runs fine after you turn it on, until it goes to sleep. After some undefined period in sleep mode, the Mac mini appears to "lose" the USB keyboard and mouse which is plugged into it. If you press a mouse button or a keyboard key a few minutes within the system going to sleep, the system will wake up and both will work. If you wait a longer period of time (say, 20 minutes or longer, although I haven't sat and timed it at all), pressing any key or mouse button does nothing, and you have to wake it from sleep by using the power button. Once awake, the keyboard and mouse do nothing. The only way to get them back is to unplug both of them (the mouse is chained through the keyboard as the other Mac mini USB slot is used by Mom's UPS), and plug them back in so the Mac mini can re-detect them on the bus, after which everything is happy again until the system has been asleep for too long.
Has anyone experienced this? Both the mouse and keyboard are genuine IBM (as in: made by International Business Machines), although are several years old (I bought them when I worked for IBM, and IIRC they were amongst the first models of USB keyboards and mice that IBM offered, if not the first).
In the interm, I've lent Mom my Apple Bluetooth mouse and keyboard, which has (as you would expect) worked flawlessly. This problem may "solve" itself -- I'm hoping to take Mom out later this week to buy her own Apple Bluetooth mouse and keyboard at the Apple Store.
The other problem, however, isn't as easy (or necessarily as cheap) to fix. Again after the system has been asleep for some time, it often (but not always) changing the resolution of the monitor when it wakes up. I have the mini set to use a reasonable 1024*768, but sometimes when it awakes it will suddenly be set to 800*600 or 832*624. Sure, you can change it back, but that's major surgury for Mom (and I'm moving cross-country next week, and won't be able to just "drop by" to fix system problems). The monitor is an Ambra SVGA model (Ambra was a brand-name of inexpensive PCs that IBM sold some years ago), and never had any such problems on her last (Intel-based) system the mini is replacing.
The whole purpose of the Mac mini is to "bring your own" Keyboard, Mouse, and Monitor -- but in our case the keyboard and mouse don't work at all after sleep, and the monitors resolution gets dynamically changed after sleep. Has anyone else encountered this situations, or any solutions? TIA!
Brad BARCLAY

Hey Jan:
I've seen quite a few posts in this regard with non-Apple mice and keyboard.
Well, the mouse and keyboard are quite old -- it could be that they're having a problem dealing with identifying themselves on the USB bus during sleep, or aren't identifying themselves fast enough at wake time. I'll just have to replace them I guess.
I've never seen a sleep resolution switching problem except on a VGA adapter to DVI connection to an old tube monitor.
Well, this is a pretty vanilla CRT monitor circa about 1999, so yeah -- it could once again be an age issue, and the fact that there is a DVI -> VGA adapter involved in the middle.
For worrying about fixing Mom's Mac, setup her remote VNC software (Apple Remote Desktop Client) and use the free Chicken of the VNC admin program.
I am quite familiar with VNC. As much admin as possible will be done by SSH, but I will have VNC in place before I leave. The big problem is going to be the fact that I'm going to be several timezones (and over 4000 km) away, so I won't necessarily be available at a moments notice to help her with this sort of thing.
The CRT issue we might just have to deal with by having her always run it at 800*600 (I don't think she'd really notice the difference, and as her eyes aren't what they once used to be, the slight size increase may be more confortable for her in the long run) until such time they she can afford to buy a nicer display (I did my duty as a son buying her the Mac mini and an iSight camera -- she has to take care of the rest ).
Yaz.

T400 - frozen mouse and keyboard after waking from standby

I'm experiencing a very annoying problem on my T400 with Win XP Professional SP3: around 75% of the time, when I wake up my T400 from standby mode, the mouse and keyboard don't work. Actually what happens is one of these situations:
1) Neither keyboard nor mouse (stick and pad) respond - Ctrl-Alt-Del to enter username/password is not registered, I can't log into Windows
2) Keyboard works (I can log into windows) but mouse doesn't respond
I have to close the laptop to standby and re-open, repeatedly, until it finally works. Though one interesting aspect is that if I have external USB keyboard and mouse plugged in, they always work.
Anyone have any ideas? Thank you in advance!

Hello jsolomin and welcome to community,
Kindly update the BIOS and then check if the issue gets resolved.
BIOS Update (Bootable CD)
BIOS update utility for Windows 32-bit
BIOS update utility for Windows 64-bit
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can't use mouse nor keyboard after booting OS X 10.6.1

Hi,
I just did a new installation of Snow Leopard incl. the update (10.6.1) and now I'm observing a strange behavior. After the OS X is booting I can move the mouse pointer but I can't click on anything and the keyboard doesn't react neither. After 1 or 2 minutes everything is working fine.
Does anybody has an idea what the problem could be?
Thanks!

Hi Brigga
My MBP suffers from something similar now and then, whereby I am unable to resize a Finder window (or QuickLook 'window') by dragging bottom right-hand corner.
A Relaunch of Finder fixes it, but somewhat annoying.
Regards
C.

External mouse and keyboard no longer work after 10.8.5 upgrade

Today I upgraded from OSX 10.8.4 to 10.8.5 on my macbook pro 17". This upgrade caused by external mouse and keyboard to completely stop working. I tried installing the 10.8.5 "combo" install (http://support.apple.com/kb/DL1676) and also tried resetting the PRAM, but neither action had any effect.
I also tried restoring to an older time machine backup with 10.8.4, but could only figure out how to restore files, not the entire system.
I've lost a day of work at this point, I need help... How can I get back to 10.8.4 or get the mouse/keyboard working again on 10.8.5??

Try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

No keyboard & mouse during Win 7 installation on 13" rMBP (Haswell)

Installing Windows 7 64-bit with Boot Camp isn't possible because the keyboard and mouse aren't working on my new 13" rMBP with Haswell processor. I've downloaded the "Support software" and used the Boot Camp Assistante to create the install USB drive. Adding a USB keyboard and mouse doesn't solve the problem. Has anybody solved the problem or should I wait for Apple to update the "Support software"?

Have seen the update and done what I could with it, again I am stuck on the last step, aka having to enter a name for the partition and choose a color, I have read that i need a wired mouse and keyboard to get past this step. Is that true? I have just been assuming maybe there is something else going on and my system is missing something during that final step. Do I have to suck it up and buy a wired mouse and keyboard?
Another thing.
This download contains the Windows Support Software (Windows Drivers) you need to support 64 bit versions of Windows 7 and Windows 8, and Windows 8.1 on your Mac.
For more information on which operating systems are supported on different Mac systems, click here:http://support.apple.com/kb/HT5634
          • The download file is a .zip file. Double click it to uncompress it, if it is not automatically uncompressed.
          • Double-click the Boot Camp5 folder.
          • Copy the entire contents of the .zip file to the root level of a USB flash drive or hard drive that is formatted with the FAT file system
          • When running Windows, locate the Boot Camp folder on the USB media you created in Step 3 and double click to open it.
          • Double click on setup to start installing the Boot Camp Support Software.
          • When prompted to allow changes, click on Yes and follow the onscreen instructions.
          • Installation can take a few minutes. Don't interrupt the installation process. When installation is complete, click Finish in the dialog that appears.
          • A system restart dialog box appears. Click Yes to complete the installation.
When running Windows, locate the Boot Camp folder on the USB media I created in step three. How would I be able to do this if I cant get past last step of the installation process
Message was edited by: awaddington

[Solved] Mouse and Keyboard Dont Work After BIOS Update

I spent the last few hours in windows 7 trying to prove to the guys over at MSFN that my problem wasn't driver or bios related by updating to the latest drivers and upgrading my bios to the most recent version. After I was finished I decided to boot back into arch to work some more on my custom kernel (since oddly it had the same problem before the bios update, the mouse and keyboard worked on one boot but once i rebooted into it again they no longer worked) and found that the keyboard and mouse no longer worked, thinking I had rebooted into the custom kernel by accident I rebooted and selected the default kernel once again only to find that the mouse and keyboard still didn't work.
Any ideas on how to fix this? I really don't want to reinstall since I just installed it last night.
Edit: Another silly mistake, i had renamed the original xorg.conf and never put back when I was finished. This makes me wonder why KDM even started up at all though.
Last edited by brando56894 (2010-01-08 08:04:21)

Hello base76, welcome to the HP Forums.
It appears that the mouse and keyboard aren't working correctly. I will try to assist you with this.
To start could you please provide the following:
Model and product numbers for you notebook.
Currently install operating system.
Were these working previously? If yes, were any changes made prior to them not working?
Have you attempted any troubleshooting? If yes, what have you tried so far?
I look forward to your reply.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Wireless mouse and Keyboard Issue after closing the lid - external display

Can anyone give any insight. Recent purchase of a new Late 2008 15" MBP. I have connected it to an external 24" Apple monitor on my desk and use a wireless mouse and wireless keyboard on my desk top. I have configured the laptop to wake on bluetooth devices. So here is the problem: The laptop when the lid is up recognizes the bluetooth keyboard and mouse. I close the lid/screen. Laptop powers down... the after several seconds I move the mouse and the laptop comes alive... But after that there are no bluetooth devices attached. When I use the mouse, I get "connection lost" with a white figure of the mighty mouse on the screen. The wireless keyboard is not there and I have to open the lid and manually find the mouse and reconnect. The keyboard seems to work however....
Apple..... any thoughts..... anyone?????

Hi Stentdoc; I'm thinking, 'connection lost ~= sorta low AA batteries in the Mighty Mouse? (I would put in fresh AA batteries in the mouse and keyboard, to eliminate as an issue that the 'connection lost' is due to low batt voltage; that this is causing the failure to wake.) ... then, in System Preferences > Hardware > Energy Saver, settings for Power Adapter > Sleep, set to "never" for "Put the computer to sleep when it is inactive for ..." to eliminate that as a conflict when trying to wake with bluetooth from sleep induced by closing the lid ...
Check your current "Sleep" setup (I left my MBP as "3")
go to Utilities > Terminal
After you launch Terminal, the first step is to determine which sleep mode your Mac is currently using. You can both view and change the sleep mode using the Unix program pmset. To see your current settings, type (or, copy and paste)
pmset -g | grep hibernatemode
press 'enter'
You should see something like this:
$ pmset -g | grep hibernatemode
hibernatemode 3
So your machine is using mode 3 ... thanks to the documentation for the handy Deep Sleep Dashboard widget, which puts your machine immediately into hibernation mode (so you don’t have to yank all the power sources to invoke it):
* 0 - Old style sleep mode, with RAM powered on while sleeping, safe sleep disabled, and super-fast wake.
* 1 - Hibernation mode, with RAM contents written to disk, system totally shut down while “sleeping,” and slower wake up, due to reading the contents of RAM off the hard drive.
* 3 - The default mode on machines introduced since about fall 2005. RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically.
also, I enabled this (to change back, input "lidwake 1":
go to Utilities > Terminal
type in sudo pmset lidwake 0 then "enter"
it will ask for your password. type it in, that's it!
Now, when your computer is sleeping with the lid closed, when you open the lid nothing happens until you press any key ... nice: keeps it off when accidentally opened, like in a backpack?
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ; then I click on the taskbar and the keyboard is active again during a few click then it stops again etc.

Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ;
to solve it I click on the taskbar and the keyboard is active again during a few click then it does not work any more and I click again on the task bar etc.
after several repetitions, I have to call the task manager alt+del+ctrl, then come back to the firefox window to be able to use keyboard and mouse again

Attaching the picture for the tab shape I want...

Microsoft Mouse and Keyboard Center - Silent Installation option?

Hello!
We are working towards a deployment of Windows 7 Enterprise via SCCM 2012. Part of our desktop hardware is a Microsoft Wireless Desktop 800 (mouse and keyboard). I noticed that the Mouse and Keyboard Center was released last week and decided to test
this rather than going with an Intellipoint\type install.
We confirmed that mouse and keyboard center work fine, and are happy for this to be included in our OSD. However, we cannot determine a method to silently install the application. We have tested running the setup executable with /? and /s switches, we have
extracted the content of the executable and tried the same. We also found what appeared to be the installation msi file but this will not execute standalone.
We have 200 desktops to deploy and having the mouse and keyboard center deploy silently during our build would be great. If there is no way around having to accept the EULA, then we may have to consider reverting to intelli-type\point.
Any advice appreciated!

Hi,
Thanks for sharing. Glad to hear this issue has been solved. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Regards
Vincent Wang
TechNet Community Support

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Bluetooth mouse and keyboard go off exactly the same time, and don't connect agian after ive installed the mac os x 10.8 updates please fix this apple

After Installing the mac os x update for 10.6.8 ive recentley in the last couple of days the bluetooth mouse and keyboard going off at the same time ive looked at some help but i feel like this is a software bug after installing so any other suggetions than taking it into an Apple Store,
I hope apple fixthis problem in there next patch update.

Hi,
Welcome to the  Discussions
Does the App launch form the Applications Folder rather than the DOCK ?
The icons in the DOCK are links to the App. Sometimes this link can get broken.
8:37 PM Sunday; December 27, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

I lost my bluetooth after installation of Maverick2. Can anyone help me please, i cannot use my magic mouse on my Mac Book Pro retina???

There is a fix; I finally discovered how to clear the Windows 7 xx64 Device Manager's warning of a missing Bluetooth Peripheral device.
Thinking Boot Camp 4.0 would correct thid, I installed it ititially today only to have the warning remain.
The Bluetooth company called Broadcom (you notice the reference during the installation of Boot Camp) offers a BlueTooth "device finder" (my phraseology) that detects all BlueTooth devices in your Apple or PC but withing a Windows operating system; included are Windows 7 , Vista, XP and even 2000 operating systems.
So download the 3 MB file, from Broadcom.com. While your Bluetooth equipment is plugged in to the computer, run the program. The program searches for any BlueTooth peripheral activated equipment and BlueTooth devices that makeup your MacBook Pro, or other Apple or a plain PC computer having a Windows operating system installed. It then downloads the appropriate software required.
The company's URL address:
http://www.broadcom.com/support/bluetooth/update.php
In my case, I ran the program, rebooted my MacBook Pro (in Windows 7 x64 and with the new Boot Camp 4.0 installed) and the missing BlueTooth peripheral device indication was eliminated. It took 10 minutes to complete.

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Keyboard and mouse not working after boot

Hello!
it's my first time here
I have been using archlinux for a couple of months and after an upgrade, my mouse and keyboard stopped working.
I have also posted it on linuxquestions:
http://www.linuxquestions.org/questions … ot-934040/
What might be causing that problem?
and, considering the problem occurred after an upgrade, reinstalling the system would correct it?

when booting into runlevel my pacman.log(only for Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:35:37 myhost Mar 11 11:39:41 myhost Mar 11 11:39:41 myhost Mar 11 11:39:41 myhost Mar 11 11:42:11 myhost Mar 11 11:42:11 myhost Mar 11 11:42:11 myhost Mar 11 11:44:41 myhost Mar 11 11:44:41 myhost Mar 11 11:44:41 myhost Mar 11 12:06:33 myhost Mar 11 12:06:33 myhost Mar 11 12:06:33 myhost Mar 11 12:16:45 myhost Mar 11 12:16:45 myhost Mar 11 12:16:45 myhost Mar 11 12:19:15 myhost Mar 11 12:19:15 myhost Mar 11 12:19:15 myhost Mar 11 12:21:45 myhost Mar 11 12:21:45 myhost Mar 11 12:21:45 myhost Mar 11 12:23:41 myhost Mar 11 12:23:41 myhost Mar 11 12:23:41 myhost Mar 11 12:31:56 myhost Mar 11 12:31:56 myhost Mar 11 12:31:56 myhost Mar 11 12:34:26 myhost Mar 11 12:34:26 myhost Mar 11 12:34:26 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:35:37 myhost Mar 11 12:36:56 myhost Mar 11 12:36:56 myhost Mar 11 12:36:56 myhost Mar 11 12:40:27 myhost Mar 11 12:40:27 myhost Mar 11 12:40:27 myhost Mar 11 12:52:30 myhost Mar 11 12:52:30 myhost Mar 11 12:52:30 myhost Mar 11 12:55:00 myhost Mar 11 12:55:00 myhost Mar 11 12:55:00 myhost Mar 11 12:57:30 myhost Mar 11 12:57:30 myhost Mar 11 12:57:30 myhost Mar 11 13:21:01 myhost -- MARK --
Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:35:37 myhost Mar 11 13:55:37 myhost -- MARK --
Mar 11 14:21:01 myhost -- MARK --
Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:35:37 myhost Mar 11 14:55:37 myhost -- MARK --
Mar 11 15:21:01 myhost -- MARK --
Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:35:38 myhost Mar 11 15:55:38 myhost -- MARK --
Mar 11 16:21:01 myhost -- MARK --
Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:35:38 myhost Mar 11 16:51:02 myhost Mar 11 16:51:02 myhost Mar 11 16:51:02 myhost Mar 11 17:21:01 myhost -- MARK --
Mar 11 17:27:48 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:18 myhost Mar 11 17:28:25 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:34 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:46 myhost Mar 11 17:28:47 myhost Mar 11 17:28:47 myhost Mar 11 17:29:04 myhost Mar 11 17:29:04 myhost Mar 11 17:29:04 myhost Mar 11 17:29:05 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:14 myhost Mar 11 17:29:19 myhost Mar 11 17:29:19 myhost Mar 11 17:29:19 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:29:20 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:30:18 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:31:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:32:15 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:35:38 myhost Mar 11 17:55:07 myhost Mar 11 17:55:07 myhost Mar 11 17:55:07 myhost Mar 11 17:57:37 myhost Mar 11 17:57:37 myhost Mar 11 17:57:37 myhost Mar 11 18:00:07 myhost Mar 11 18:00:07 myhost Mar 11 18:00:07 myhost Mar 11 18:17:33 myhost Mar 11 18:17:33 myhost Mar 11 18:17:33 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:35:38 myhost Mar 11 18:55:39 myhost -- MARK --
Mar 11 19:21:01 myhost -- MARK --
Mar 11 19:27:03 myhost Mar 11 19:27:04 myhost Mar 11 19:27:04 myhost Mar 11 19:29:33 myhost Mar 11 19:29:33 myhost Mar 11 19:29:33 myhost Mar 11 19:32:03 myhost Mar 11 19:32:03 myhost Mar 11 19:32:03 myhost Mar 11 19:34:05 myhost Mar 11 19:34:05 myhost Mar 11 19:34:05 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:35:38 myhost Mar 11 19:55:38 myhost -- MARK --
Mar 11 20:21:01 myhost -- MARK --
Mar 11 20:32:12 myhost Mar 11 20:32:12 myhost Mar 11 20:32:12 myhost Mar 11 20:34:42 myhost Mar 11 20:34:42 myhost Mar 11 20:34:42 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:35:38 myhost Mar 11 20:37:12 myhost Mar 11 20:37:12 myhost Mar 11 20:37:12 myhost Mar 11 20:48:37 myhost Mar 11 20:48:37 myhost Mar 11 20:48:37 myhost Mar 11 20:54:44 myhost Mar 11 20:54:44 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:48 myhost Mar 11 20:54:49 myhost Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:23:35 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:25:59 myhost kernel: [ Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:01 myhost Mar 12 10:26:02 myhost kernel: [ Mar 12 10:26:57 myhost Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12:41:56 myhost kernel: [ Mar 12 12 3, the keyboard and mouse works fine.
the update day) and messages.log are:
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[2756]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[2926]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3041]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3095]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3144]: eth0: eth0: MTU set to 576
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[3192]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
init: Trying to re-exec init
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
kernel: [25090.053873] mdadm: sending ioctl 800c0910 to a partition!
kernel: [25090.053877] mdadm: sending ioctl 800c0910 to a partition!
kernel: [25090.053883] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.053885] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.060059] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.060061] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.076899] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.076902] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.077037] mdadm: sending ioctl 1261 to a partition!
kernel: [25090.077039] mdadm: sending ioctl 1261 to a partition!
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dbus[434]: [system] Reloaded configuration
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[6669]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[7243]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[8708]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dhcpcd[1269]: eth0: renewing lease of 192.168.1.100
dhcpcd[1269]: eth0: acknowledged 192.168.1.100 from 192.168.1.1 `ÿ'
dhcpcd[1269]: eth0: leased 192.168.1.100 for 7200 seconds
dhcpcd[10147]: eth0: eth0: MTU set to 576
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[434]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[434]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
shutdown[10347]: shutting down for system halt
init: Switching to runlevel: 0
dhcpcd[10522]: sending signal 1 to pid 1269
dhcpcd[1269]: received SIGHUP, releasing
dhcpcd[1269]: eth0: releasing lease of 192.168.1.100
dhcpcd[10522]: waiting for pid 1269 to exit
dhcpcd[10527]: eth0: eth0: MTU restored to 1500
dhcpcd[1269]: eth0: removing interface
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0Mar 12 10:25:59 myhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI present.
0.000000] No AGP bridge found
0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [ffff8800000ff780] ff780
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
0.000000] init_memory_mapping: 0000000100000000-0000000140000000
0.000000] RAMDISK: 3759a000 - 37ff0000
0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
0.000000] ACPI: FACS 00000000bffce000 00040
0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-0000000140000000
0.000000] Initmem setup node 0 0000000000000000-0000000140000000
0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] DMA32 0x00001000 -> 0x00100000
0.000000] Normal 0x00100000 -> 0x00140000
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[3] active PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x000bffc0
0.000000] 0: 0x00100000 -> 0x00140000
0.000000] Nvidia board detected. Ignoring ACPI timer override.
0.000000] If you got timer trouble try acpi_use_timer_override
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
0.000000] Allocating PCI resources starting at bfffe000 (gap: bfffe000:3ec02000)
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u524288
0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027914
0.000000] Policy zone: Normal
0.000000] Kernel command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ 748000000 size 32 MB
0.000000] Aperture beyond 4GB. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
0.000000] Memory: 3974248k/5242880k available (4488k kernel code, 1049284k absent, 219348k reserved, 4409k data, 736k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] Verbose stalled-CPUs detection is disabled.
0.000000] NR_IRQS:4352 nr_irqs:712 16
0.000000] Console: colour VGA+ 80x25
0.000000] console [tty0] enabled
0.000000] allocated 33554432 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] Fast TSC calibration using PIT
0.000000] Detected 2109.668 MHz processor.
0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.14 BogoMIPS (lpj=7032226)
0.003342] pid_max: default: 32768 minimum: 301
0.003370] Security Framework initialized
0.003376] AppArmor: AppArmor disabled by boot time parameter
0.003905] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
0.007031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
0.007954] Mount-cache hash table entries: 256
0.008114] Initializing cgroup subsys cpuacct
0.008121] Initializing cgroup subsys memory
0.008131] Initializing cgroup subsys devices
0.008133] Initializing cgroup subsys freezer
0.008136] Initializing cgroup subsys net_cls
0.008138] Initializing cgroup subsys blkio
0.008192] CPU: Physical Processor ID: 0
0.008194] CPU: Processor Core ID: 0
0.008197] mce: CPU supports 6 MCE banks
0.008208] using AMD E400 aware idle routine
0.009025] ACPI: Core revision 20110623
0.011442] ftrace: allocating 17394 entries in 69 pages
0.014007] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
0.047059] CPU0: AMD Phenom(tm) 8400 Triple-Core Processor stepping 02
0.049997] Performance Events: AMD PMU driver.
0.049997] ... version: 0
0.049997] ... bit width: 48
0.049997] ... generic registers: 4
0.049997] ... value mask: 0000ffffffffffff
0.049997] ... max period: 00007fffffffffff
0.049997] ... fixed-purpose events: 0
0.049997] ... event mask: 000000000000000f
0.066733] NMI watchdog enabled, takes one hw-pmu counter.
0.093342] Booting Node 0, Processors #1
0.190007] NMI watchdog enabled, takes one hw-pmu counter.
0.210005] #2
0.306665] NMI watchdog enabled, takes one hw-pmu counter.
0.313317] Brought up 3 CPUs
0.313319] Total of 3 processors activated (12662.21 BogoMIPS).
0.315139] devtmpfs: initialized
0.317377] PM: Registering ACPI NVS region at bffce000 (139264 bytes)
0.317603] print_constraints: dummy:
0.317656] NET: Registered protocol family 16
0.317767] TOM: 00000000c0000000 aka 3072M
0.317784] TOM2: 0000000140000000 aka 5120M
0.317805] Extended Config Space enabled on 1 nodes
0.317819] ACPI: bus type pci registered
0.317893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.317896] PCI: not using MMCONFIG
0.317898] PCI: Using configuration type 1 for base access
0.317899] PCI: Using configuration type 1 for extended access
0.318408] bio: create slab <bio-0> at 0
0.318408] ACPI: Added _OSI(Module Device)
0.318408] ACPI: Added _OSI(Processor Device)
0.318408] ACPI: Added _OSI(3.0 _SCP Extensions)
0.318408] ACPI: Added _OSI(Processor Aggregator Device)
0.321075] ACPI: Executed 1 blocks of module-level executable AML code
0.322673] ACPI: Interpreter enabled
0.322677] ACPI: (supports S0 S1 S4 S5)
0.322695] ACPI: Using IOAPIC for interrupt routing
0.322713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.323739] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
0.353905] ACPI: No dock devices found.
0.353908] HEST: Table not found.
0.353912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.354095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.354265] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
0.354268] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
0.354271] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
0.354273] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
0.354276] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
0.354279] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
0.355812] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
0.359989] pci 0000:00:09.0: PCI bridge to [bus 02-02]
0.360030] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
0.360061] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d)
0.360569] pci0000:00: ACPI _OSC control (0x1d) granted
0.365142] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
0.365238] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
0.365330] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
0.365424] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
0.365515] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
0.365606] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
0.365697] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
0.365788] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
0.365882] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
0.365973] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
0.366073] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
0.366165] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
0.366256] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
0.366346] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
0.366437] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
0.366528] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
0.366618] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
0.366728] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
0.366818] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
0.366818] vgaarb: loaded
0.366818] vgaarb: bridge control possible 0000:02:00.0
0.366818] PCI: Using ACPI for IRQ routing
0.374202] pci 0000:00:01.3: no compatible bridge window for [mem 0xfec80000-0xfecfffff]
0.374361] NetLabel: Initializing
0.374363] NetLabel: domain hash size = 128
0.374365] NetLabel: protocols = UNLABELED CIPSOv4
0.374382] NetLabel: unlabeled traffic allowed by default
0.381236] pnp: PnP ACPI init
0.381259] ACPI: bus type pnp registered
0.382933] system 00:07: [io 0x04d0-0x04d1] has been reserved
0.382939] system 00:07: [io 0x0800-0x080f] has been reserved
0.382942] system 00:07: [io 0x4000-0x407f] has been reserved
0.382945] system 00:07: [io 0x4080-0x40ff] has been reserved
0.382948] system 00:07: [io 0x4400-0x447f] has been reserved
0.382950] system 00:07: [io 0x4480-0x44ff] has been reserved
0.382953] system 00:07: [io 0x4800-0x487f] has been reserved
0.382955] system 00:07: [io 0x4880-0x48ff] has been reserved
0.382958] system 00:07: [io 0x4c00-0x4c7f] has been reserved
0.382960] system 00:07: [io 0x4c80-0x4cff] has been reserved
0.382964] system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
0.382966] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
0.382969] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
0.382973] system 00:07: [mem 0xfec80000-0x1fd93ffff] could not be reserved
0.382975] system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved
0.382978] system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved
0.382981] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
0.382984] system 00:07: [mem 0xffb80000-0xffffffff] could not be reserved
0.383127] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.383130] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
0.383413] system 00:0b: [io 0x0a00-0x0adf] has been reserved
0.383416] system 00:0b: [io 0x0ae0-0x0aef] has been reserved
0.383507] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
0.383708] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
0.383710] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
0.383713] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
0.383716] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
0.383719] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
0.383953] pnp: PnP ACPI: found 14 devices
0.383955] ACPI: ACPI bus type pnp unregistered
0.390613] Switching to clocksource acpi_pm
0.390674] pci 0000:00:01.3: BAR 0: assigned [mem 0xd0000000-0xd007ffff]
0.390679] pci 0000:00:01.3: BAR 0: set to [mem 0xd0000000-0xd007ffff] (PCI address [0xd0000000-0xd007ffff])
0.390683] pci 0000:00:04.0: PCI bridge to [bus 01-01]
0.390691] pci 0000:00:09.0: PCI bridge to [bus 02-02]
0.390694] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
0.390698] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff]
0.390702] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
0.390706] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
0.390712] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
0.390824] NET: Registered protocol family 2
0.391013] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
0.392601] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
0.395867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.396352] TCP: Hash tables configured (established 524288 bind 65536)
0.396355] TCP reno registered
0.396368] UDP hash table entries: 2048 (order: 4, 65536 bytes)
0.396419] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
0.396554] NET: Registered protocol family 1
0.460124] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460179] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460246] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460312] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460377] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460449] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460526] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460609] pci 0000:00:00.0: Found enabled HT MSI Mapping
0.460711] Unpacking initramfs...
0.572196] Freeing initrd memory: 10584k freed
0.577900] PCI-DMA: Disabling AGP.
0.581545] PCI-DMA: aperture base @ b4000000 size 65536 KB
0.581547] PCI-DMA: using GART IOMMU.
0.581551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
0.585462] IBS: LVT offset 1 assigned
0.585486] perf: AMD IBS detected (0x00000007)
0.585671] audit: initializing netlink socket (disabled)
0.585695] type=2000 audit(1331547952.583:1): initialized
0.598511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.625385] VFS: Disk quotas dquot_6.5.2
0.625456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.625563] msgmni has been set to 7911
0.625796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.625843] io scheduler noop registered
0.625845] io scheduler deadline registered
0.625880] io scheduler cfq registered (default)
0.626497] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
0.626501] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
0.626523] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
0.626541] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
0.626710] ERST: Table is not found!
0.626712] GHES: HEST is not enabled!
0.626780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
0.647333] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.883974] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.943516] Linux agpgart interface v0.103
0.943585] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
0.945853] serio: i8042 KBD port at 0x60,0x64 irq 1
0.945870] serio: i8042 AUX port at 0x60,0x64 irq 12
0.946084] mousedev: PS/2 mouse device common for all mice
0.946138] rtc_cmos 00:02: RTC can wake from S4
0.946297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
0.946334] rtc0: alarms up to one year, y3k, 114 bytes nvram
0.946347] cpuidle: using governor ladder
0.946350] cpuidle: using governor menu
0.946589] TCP cubic registered
0.946729] NET: Registered protocol family 10
0.947209] NET: Registered protocol family 17
0.947213] Registering the dns_resolver key type
0.947383] registered taskstats version 1
0.960176] rtc_cmos 00:02: setting system clock to 2012-03-12 10:25:53 UTC (1331547953)
0.960226] Initializing network drop monitor service
0.961665] Freeing unused kernel memory: 736k freed
0.961941] Write protecting the kernel read-only data: 8192k
0.964578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
0.968163] Freeing unused kernel memory: 1636k freed
0.971309] Freeing unused kernel memory: 660k freed
0.983845] udevd[66]: starting version 181
1.019251] usbcore: registered new interface driver usbfs
1.019287] usbcore: registered new interface driver hub
1.019363] usbcore: registered new device driver usb
1.020457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.022334] SCSI subsystem initialized
1.024094] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
1.024122] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
1.024181] ehci_hcd 0000:00:02.1: EHCI Host Controller
1.024230] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
1.024274] ehci_hcd 0000:00:02.1: debug port 1
1.024314] ehci_hcd 0000:00:02.1: irq 23, io mem 0xdbf7ec00
1.033384] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
1.033711] hub 1-0:1.0: USB hub found
1.033717] hub 1-0:1.0: 10 ports detected
1.034730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.036435] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
1.036458] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
1.036513] ohci_hcd 0000:00:02.0: OHCI Host Controller
1.036536] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
1.036579] ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbf7f000
1.088876] hub 2-0:1.0: USB hub found
1.088885] hub 2-0:1.0: 10 ports detected
1.090175] scsi0 : pata_amd
1.090309] scsi1 : pata_amd
1.091064] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
1.091067] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
1.094698] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
1.094721] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
1.095105] scsi2 : sata_nv
1.095190] scsi3 : sata_nv
1.095306] ata3: SATA max UDMA/133 cmd 0xdd80 ctl 0xdd00 bmdma 0xdb00 irq 21
1.095309] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xdb80 bmdma 0xdb08 irq 21
1.095559] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
1.095574] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
1.095843] scsi4 : sata_nv
1.095923] scsi5 : sata_nv
1.096025] ata5: SATA max UDMA/133 cmd 0xda80 ctl 0xda00 bmdma 0xd880 irq 20
1.096028] ata6: SATA max UDMA/133 cmd 0xd980 ctl 0xd900 bmdma 0xd888 irq 20
1.417172] ata5: SATA link down (SStatus 0 SControl 300)
1.560059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
1.566979] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
1.566983] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
1.573620] ata3.00: configured for UDMA/133
1.573817] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
1.586714] Refined TSC clocksource calibration: 2109.721 MHz.
1.586720] Switching to clocksource tsc
2.040045] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
2.046813] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
2.060169] ata4.00: configured for UDMA/100
2.068605] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
2.390479] ata6: SATA link down (SStatus 0 SControl 300)
2.397239] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
2.397316] sd 2:0:0:0: [sda] Write Protect is off
2.397338] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
2.413212] sda: sda1 sda2 sda3 sda4
2.413653] sd 2:0:0:0: [sda] Attached SCSI disk
2.423220] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
2.423226] cdrom: Uniform CD-ROM driver Revision: 3.20
2.818552] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
2.818556] EXT4-fs (sda3): write access will be enabled during recovery
2.844947] EXT4-fs (sda3): recovery complete
2.845244] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
4.125862] udevd[177]: starting version 181
5.513480] EXT4-fs (sda3): re-mounted. Opts: (null)
5.619429] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
ntpd[546]: ntpd [email protected] Thu Mar 1 21:32:56 UTC 2012 (1)
ntpd[547]: proto: precision = 0.115 usec
ntpd[547]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
ntpd[547]: Listen and drop on 1 v6wildcard :: UDP 123
ntpd[547]: Listen normally on 2 lo 127.0.0.1 UDP 123
ntpd[547]: Listen normally on 3 lo ::1 UDP 123
ntpd[547]: peers refreshed
ntpd[547]: Listening on routing socket on fd #20 for interface updates
9.760264] mtrr: base(0xdd000000) is not aligned on a size(0xe00000) boundary
dbus[419]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
0.000000] Command line: root=/dev/disk/by-uuid/03876ae1-14ad-42f4-920b-9d949d3cb434 ro
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
0.000000] BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
0.000000] BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI present.
0.000000] No AGP bridge found
0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [ffff8800000ff780] ff780
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: 0000000000000000-00000000bffc0000
0.000000] init_memory_mapping: 0000000100000000-0000000140000000
0.000000] RAMDISK: 37d6c000 - 37ff0000
0.000000] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)
0.000000] ACPI: RSDT 00000000bffc0000 00038 (v01 021709 RSDT1317 20090217 MSFT 00000097)
0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 021709 FACP1317 20090217 MSFT 00000097)
0.000000] ACPI: DSDT 00000000bffc04a0 04880 (v01 1ADKR 1ADKR017 00000017 INTL 20051117)
0.000000] ACPI: FACS 00000000bffce000 00040
0.000000] ACPI: APIC 00000000bffc0390 00080 (v01 021709 APIC1317 20090217 MSFT 00000097)
0.000000] ACPI: MCFG 00000000bffc0410 0003C (v01 021709 OEMMCFG 20090217 MSFT 00000097)
0.000000] ACPI: WDRT 00000000bffc0450 00047 (v01 021709 NV-WDRT 20090217 MSFT 00000097)
0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 021709 OEMB1317 20090217 MSFT 00000097)
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-0000000140000000
0.000000] Initmem setup node 0 0000000000000000-0000000140000000
0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] DMA32 0x00001000 -> 0x00100000
0.000000] Normal 0x00100000 -> 0x00140000
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[3] active PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x000bffc0
0.000000] 0: 0x00100000 -> 0x00140000
0.000000] Nvidia board detected. Ignoring ACPI timer override.
0.000000] If you got timer trouble try acpi_use_timer_override
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000bffce000
0.000000] PM: Registered nosave memory: 00000000bffce000 - 00000000bfff0000
0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfffe000
0.000000] PM: Registered nosave memory: 00000000bfffe000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000

No Mouse or Keyboard After Installation

Similar Messages

Maybe you are looking for