No mouse or sound on my new W7 Bootcamp Install - PLEASE HELP!!
I recently installed a new copy of Windows 7 on my MacBook Pro using BootCamp 3.2. Now my Windows will not connect with my mouse via bluetooth. I can no longer hear sound from my onboard speakers either. I get sound out headphone jack but that's it. What am I missing? I did wipe out my previous NTFS partition out prior to installing the new Windows7.
I did. When I run the executable it responds with the message "a newer version of bootcamp is already installed. Installation of this version can not continue". When I go to pair my mouse it pairs for a brief second and then drops. I'm completely lost at this point.
Similar Messages
-
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
My cousin bought iPod touch 5th gen. Then it doesn't turned on. He charge it a charge icon appeared but after 30 mins still off . Is that normal for a brand new iPod touch? Please help me..
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
and
try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
just downloaded itunes when u try to open library keeps coming up itunes library itl cannot be read because it was created by a newer version of itunes,please help !!!
You posted in the iTunes for Mac forum, by the way.
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes. -
Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
thanks
MujeebSee options below:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.
CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.
-
I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?
I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
I have a cellular data account on my iPad. Almost immediately after I signed up, my e-mail was hacked and had to be cancelled. I cannot get into my AT&T cellular data account now to change the billing and account to my new e-mail. Please help.
According to the AT&T Wireless web site, you can manage your iPad data plan either from the iPad, or by using a web browser:
From the website
Log in to your account at att.com/iPadlanding using the email address and password you used during activation.
Your account information will display. Select the desired account change option then tap Next.
Read the Terms of Service, and then tap Accept.
Review the Payment Summary to ensure the details are correct. Use the Back button if changes are required, otherwise tap Submit.
Read the Confirmation message then tap OK. -
I WORK WITH A MAGAZINE AND OUR GRAPHIC DESIGNER IS OUT OF TOWN. SO INSTEAD OF WAITING FOR HIM TO RETURN JULY 10TH, I AM TRYING TO DESIGN SOME PAGES MYSELF. I AM CURRENTLY WORKING WITH PHOTOSHOP CS3. MY QUESTION IS. I HAVE 3 COLUMS OF TEXT GOING DOWN ON THE PAGE LISTED BELOW. WHAT IS THE EASIEST WAY TO CUT AND PASTE THE TEXT INTO THE TEXT FRAMES. HOW CAN I MAKE 3 TEXT FRAMES AT ONCE, THEN CUT AND PASTE THE TEXT, SO THE WHOLE STORY GOES INTO THE TEXT FRAMES ALL AT ONCE? RIGHT NOW I MAKE 1 TEXT FRAME, CUT AND PASTE PART OF A STORY INTO EACH TEXT FRAME AT A TIME. ITS REALLY A PAIN. THANKS, FOR THE HELP.
I stand by my statement. I said…
please repost legibly or just stay off this forum.
So, if the OP (OP means Original Poster) is wiling to repost his request legibly, then all I did was politely ask them to. If not, then… they should leave because eventually good help will not be found. I expect that the OP will take the former option because I am an optimist and generally credit people with good intentions. I assume the ALL CAPS was a result of ignorance or inattention. Now the OP is informed and can contribute to the forum with clarity and respect.
I omitted one other piece of advice:
This forum is intended for help with Photoshop. A posting called “NEW TO FORUM. PLEASE HELP” does nothing to explain your problem. A more proper post is something like “CS3: need help using clone tool with layers”. This helps posters understand your general problem right away so we know whether to skip it (if one is not very familiar with the Clone tool) or read and respond (if someone else comes along who is familiar with the clone tool).
Telling us the version is vital, since features and commands change from version to version and we need to know what tools and commands are available. Finally, once your question is answered you can mark it as answered. Later, people coming to the forum with the same problem can search and find your post, see it has been answered, and solve the problem themselves without typing a post and waiting for a reply.
Please read this before posting again so you know how best to not only find the help you need, but let the help you need find you.
http://forums.adobe.com/thread/375816?tstart=0 -
I have an issue with my computer. the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011. so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out. When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT it is a light gray color and it does not let me check the setting off. please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
*******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific) -
Safari wont let me open links in new tabs anymore? Please help!?
On my Macbook, I'm using Safari as my browser.
Everything was fine until this morning; suddenly Safari will not give me the option of opening links from one page in another tab in the same window.
For example, if I'm browsing on EBay and want to open a search result in a new tab of the same window, usually when I would right click on my track pad or magic mouse, it would say "Open link in new tab" or "Open link in new window". However, now when I right click, it just says, "Open link" "Open link in new window" and "Copy link".
I haven't changed any settings or anything on my Macbook whatsoever in the last 3 hours (at least that I'm aware of). Can anyone please tell me how to get this back to normal?
Also, it seems that when I right click anywhere on a page, I only see the options "back" and "reload" whereas before there was "view source" etc.
Please help!
xx0Hi,
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Since you are running Snow Leopard, *make sure Safari is opening in 32-bit mode, not 64*. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) *make sure Safari is NOT running in Rosetta.*
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
If Safari still won't let you open links in new tabs, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
If your forum profile is correct (10.6.1) go to the Apple Menu/Software Updates ...
Very important to keep your system software up to date.
If you install the 10.6.3 update make sure and repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Edited by: Carolyn -
Buying A New Battery Again? PLEASE HELP.
Hi,
When I first purchased my MBP 15" in 2007, the battery would only last at most a couple hours. It would decrease more and more until it would only last for 10 minutes (I usually leave it plugged in when it is already 100% and overnight).
I got a new battery a few months ago and it worked great, giving me around 4-5 hours of battery if I remember correctly. I still kept it plugged in at 100% and kept it on overnight. Soon after, the battery would only last 10-15 minutes when unplugged (within a matter of months of buying a new battery).
Now it doesn't charge the battery to 100%, it stays at 0% so I am required to keep it plugged in. I was wondering whether this was a battery fault or something else. I have no more warranty and was wondering what I should do. I do not want to drop another $120 on a new battery if that isn't the main problem.
Please help me, I appreciate any kind of information. Thank you!Welcome to Apple Discussions!
Unfortunately you didn't buy AppleCare, or take advantage of the past warranty Exchange/Repair program that existed for batteries for awhile. Sounds like you are out of luck. Have it looked at by one of these technicians, if they charge less than Apple:
http://www.dttservice.com/
http://www.powerbookresq.com/
http://www.microdocusa.com/
http://www.macspecialist.com/
http://www.techrestore.com/ -
AFTER UPDATE GREY SCREEN NO SOUND THEN SHUTS DOWN AFTER 30 SECONDS PLEASE HELP
AFTER UPDATE GREY SCREEN APPEARS WHEN POWER BUTTON PRESSED NO START UP SOUND THEN SHUTS DOWN AFTER 30 SECONDS AND REPEATS ITS SELF PLEASE HELP
As for now, only thing that helped was an archive and install with preserve user settings. Seems after the reinstall of 10.4. everything that was weird has become normal again. I hope very much this state stays on for a while - or ever!
A comment to everybody: with problems that are common you get a lot of help from friendly users in here, but if like in my situation things get a bit more uncommon than the usual querks and troubles your bound to go through a whole workflow of tests and algorithms - i did learn some new things but eventually I had to go for the ultimate - the reinstall (of course, erase and install would have been more work.) and it's frustrating not to find out how it came to this problem. I wish I could nail it down to something I did mistakenly - i guess I'll find out next time.
THANKS THOUGH to those who replied.
Keywan -
Sound Problems with Mainbord....Please help!
MSI K8N SLI Platinum nForce4 Ultra 4DDR-DIMM 3PCI 3PCIe SATA-II Raid Audio GB-LAN Firewire Socket939 ATX
Hi are having huge problems with my sound.
Got all the gadgets last week. And have built the computer now. Everything is installed, all the drivers i got with the Box.
Now the problem is that the sound i very "crappy". It sound´s like a broken speaker. i have tried with different speakers and the problem persist.
Ive tried changing drivers and all that, and checked all setting. But nothing changes...
I get sound, but it sounds like hell. Cant almost not hear what´s playing or what are said through the speaker.
Is it a hardware problem, something broken on Mainbord??????
Somebody know?
Please help.Just as a suggestion. . . .
I would remove the soundcard and clean the edge pin connectors. The "static" type sound could be comming from a resistive connection in the edge connector. You may also try running dxdiag from your "start / run" menu and see if the sound results are better.
Also, (even though the sound card is new), you may want to blow out the pin connector in the back of the card (where you plug in your speakers) and try reseating your speaker cable again.
Someone above mentioned power. That could easily be an issue if you have alot of hardware and a power supply that is not up to par with your gear.
EDIT: For some reason, I thought you had a soundblaster card. So, pls forgive the card removal information. just trying to help!
Just some stuff to check. . . GL!
doggy -
Can't fuse music from iPod to new PC iTunes Library - please help!!
I recently moved to a new country and transferred all my music on my iPod. Just bought a new PC and installed my iTunes, but can't figure out how to get my iPod music onto my Library. Please help, I'm getting frustrated!!!
Apparently, you open the music folder from your iPod drive (after it's been connected), then highlight all the files from the iPod folder and drag them to your My Music folder and import the folder to My Library. Don't forget to enable view of hidden files beforehand. Takes a little while, depending on how much music you have on your iPod.
Maybe you are looking for
-
Null Trunk in Termination Call Detail in HDS
We are running CVP and ICM version 8. On the HDS Termination Call Detail table, the Trunk field is showing Null. In the old version 7.2, the Trunk field showed values. This field is used by our reporting application (Exony VIM 8). It basically sho
-
Error message iTunes was unable to load data class information from Sync Services
I purchased some songs to download to my ipod and keep getting the following message: iTunes was unable to load data class information from Sync Services. The songs have transferred okay to my ipad and iphone with no issue. ipod has sw update 6.1.6.
-
iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?
-
PO workflow showing status as APPROVED.. but in Oracle status is"IN PROCESS
In Our 11i , one of the PO workflow showing status as APPROVED.. but in Oracle Still showing the status as "IN PROCESS".. could you Please suggest solution...?
-
Find out if the content will be rendered in "edit" mode programmatically
I need to use redirect to send user to different page for certain reason. I use HttpPortletRendererUtil.sendRedirect() to accomplish the task. It works fine. The problem is I do not want it redirect in page modes other than "show" mode. Is there a wa