No mov. allowed in reservation

Dear SAP gurus,
We have a scenario of Sloc MRP in my compnay. For instance, Plant 1000 have 2 sloc: 0001 and 0002. Plant 0002 will have a re-order point of 10, in which in case our stock level in 1000-0002 is below 10, when we run the MRP, transfer reservation to 1000-0002 will be created.
However we this transfer reservation would need to have some kind of approver. We intend to simulate this approval, by making the mov.allowed unticked by default at the time of reservation creation by MRP, and then will give access to the approver to mass-change this to ticked when he is alright with the transfer.
We have set in OMBN that the default value for reservatin in plant 1000 should be unticked and the days before the mov.type ticked automtaically is 999. However it seems that whenever we run MRP and the reservation is created, the indicator is always ticked.
Is there any other way to make sure that the indicator is unticked as default??
Best regards,
John

Hello sap_2605,
As I understand:
OMBN
1. 'Mvt' field is empty ('No') for your plant.
2. 'Days m' field is set to 0 (day).
In this case the thickbox should be empty and only during mass change you could set it to 'allowed' as per your requirement.
http://help.sap.com/saphelp_46c/helpdata/en/a5/63374743a211d189410000e829fbbd/content.htm
Please come back if you have question or your problem is not solved!
BR
Csaba

Similar Messages

  • Movement allowed in Reservation not tick after cancellation

    Hi there,
    We have a material reservation automatically created in our service module. We posted a goods issue in these materials (2 materials) 261 based in reservation and it was successful.
    ##result
    Material document line item 1
    Material document line item 2
    However, one of the items needs to be return to stock as it was not needed anymore, hence we do the cancellation of the earlier material document as per normal cancellation.
    But I realized, after the cancellation, the result was the first material was successfully cancelled but the 2nd line was not. It created another manual 262 which was not referred to the reservation. So the earlier 261 for reservation line item 2 was not cancelled at all.
    When I further checked, the movement allowed box for the reservation line item 2 was not there and completely gone, which was a bit weird because earlier during goods issue we were allowed to post into it.
    Now I am trying to activate again the movement allowed box but I cannot edit the reservation itself via MB22 because the reservation was not created manually, it was created auto from service order.
    Anyway I can proceed in cancelling the 2nd line based from reservation? Any program or way to activate the movement allowed box in the reservation?
    Thank you in advance.
    Regards,

    Do you two material document or both line items was in same material document?
    Why you want to cancel both line items as you want only one line item to be cancelled?
    Which Transaction You used for cancellation?
    If your are using MBST transaction it tick the line item tick mark automatically as per std.
    Check if you might have Un-tick while posting by mistake.
    Reservation created through any other trns like service  order, PM or PS cannot be changed through MB22.
    Rather it can changed by source element.
    519580 - FAQ: Reservations

  • Movement allowed indicator

    Dear All,
    I am facing this problem while planning material components for my project.
    When I assign some stock material  ( item cat. L) to a network activity, the system does not reflect the same in MB25. But in MB25, if I check the indicator " Goods movement not allowed", it reflects the reservation.
    When i go to material component in project structure, I can see that under "proc. parameter" tab, under section "general indicators" the radio button for Movement allowed is not active.
    Whereas for another project , this same indicator is active and hence i can see the reservation in MB25.
    Can u pls guide me, for what background setting, this "Movement allowed " indicators become active or inactive.
    Thanks in advance.
    Vikas sharma

    Hi,
    Another factor is the requirement date:
    The reservation management program sets the 'Movement allowed' indicator for requirements dates planning within certain preset time horizon. For requirements which lie beyond this preset time horizon movement is not allowed (for instance, reservations with requirement dates in the far future). The time horizon is set in customizing.
    Further, I think  'planned Independent requirements'  are normally created with 'movement not allowed' indicator.
    You can check what applies to your situation.
    regards
    Murali

  • Movement allowed indicator not on automatically

    Hi folks!!
    We are generating reservation with reference to production order through MRP.
    In customising, we have set the no of days 10 for the movment allowed indicator to be on in reservation automatically.
    But strangely for some material we are un able to make issuance due to movement allowed indicator is not check in reservation. Although the current date is 14.10.09 and requirement date is 20.10.09 so it is falling under the 10 days limitation set in customising.
    Please let me know is there any other setting available to solve this problem.
    Best regards

    Dear Pervez,
    Once when the production order's are released this indicator for the movement allowed will be automatically set by the
    system for the reservation number that is linked to the production order.
    Can you please let me know how did you achieve this setting the movement indicator automatically?Which customize setting
    helps for this issue?
    check and revert back.
    Regards
    Mangalraj.S

  • Movement type for reserve material

    Hi sap gurus,
    While doing quality inspection, I had kept some quantity in reserves. How can move it to unrestricted stock and scrap stock. Which is the T.Code for that
    Cheers,
    Krishna

    Hi,
    Do the Ud for the reserved qty and then the stock will come to unrestricted and from there u can transfer post using the tcode MB1B , mvt type is 551 to the scrap it.
    Hope it wud have answered ur question
    Reward if useful
    Aasif

  • Movement type for reservation

    Hi All,
    We are using SRM 5.0 ECS.
    Once the shopping cart is created for stock materials it creates reservation in R/3 system.Could you please let me know how it considers movement type once the account assignment is given as Order or Cost centrei.e. either it should take 261 or 201. Where is validation wriiten for this? Is it using any BADI or any configuration involved?
    Regards

    Hi
    For reservation we dont have any MType evenin MM.  Generally we do it in ME21 in ECC.   I think you need to create enchancement for this. 
    Regards,
    Satish

  • Multiple movement types for reservation

    Dear experts ,
    Is it possible to give multiple movement types for issue against reservations? if possible what should be the setting in "Define Movement Types for Material Reservations"
    We are trying to issue materials against reservation to different GL accounts based on different movement types.
    Best Regards
    Kannan G

    I think you can have different movement types for GI against an Maintenance Order.
    Please check as per the following scenario
    Material A with valuation class "400"
    material B with valuation class "300"
    Now in automatic account determination you define
    movement type "990" for valuation class "400" incase of good issue
    movement type "890" for valuation class "300" incase of good issue
    Now whenever material A is issued it will be mvt type 900 & for material B issue 890.
    Regards
    You can also look at the following possibility:
    Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Orders -> Functions and Settings for Order Types -> Goods Movements for Order -> Movement Types for PM/CS Orders -> Maintain Movement Types for PM/CS Orders.
    Also look at the badis:
    BADI DI_MOVEMENTYPES
    BADI_DIAD_GOODMVT_1
    Online Documentation for the above node:
    *Maintain Movement Types for PM/CS Orders*
    In this step you maintain movement types for PM/CS orders depending on material group, order type and a customer defined key. This key is read by BADI DI_MOVEMENTYPES. If the system doesn't find any information in this table, the corresponding movement types are determined based on the data of the Standard table.
    Further notes
    Using BADI_DIAD_GOODMVT_1, follow-up actions can be triggered for special movement types.
    Edited by: SAPASSUM on Aug 5, 2010 9:26 AM

  • Movement type and reservation

    hi MM expert,
    for material reservation , the movement type is 201.
    I have one scenario, how can i create a reservation at company A, then the stock replenishmnent at subcon stock. i dont want to have PR at company A and send to company B. but i want to use subcon stock tcode ME20 to transfer stock to subcon company code ?
    Appreciate your advuse .

    Hi,
    You may have to use Stock Transport order not Subcontract PO
    Regards
    Anand

  • Movement type in reservation

    Hi
    We are in a Classic Scenario environment and the requirement is for a certain type of material to create Reservations in the backend with a different Movement Type. Let’s say we have we need two movement type  201 for cost center and 241 for asset
    I have assigned this value (241) for the movement type and set it up as default but it didn’t work, the reservation was still created with 201.
    how can i manage two movement type in creating reservation
    Regards
    Elham

    Hi Justine Delos Angeles
    we implement BAdi BBP_CREATE_BE_RS_NEW
    but the system also want to creating asset with movement type 201
    can u send me the sample of badi for reserve
    is my badi confiq ok?
    method IF_EX_BBP_CREATE_BE_RS_NEW~FILL_RS_INTERFACE1.
       data : account type line of BBPT_PDEXT_ACC.
       loop at  IS_SC_DOCUMENT-ACCOUNT into ACCOUNT.
         if account-ACC_CAT = 'CC'.
           CS_RS1_DOCUMENT-IS_RS_HEADER-MOVE_TYPE = '201'.
         elseif account-ACC_CAT = 'AS'.
           CS_RS1_DOCUMENT-IS_RS_HEADER-MOVE_TYPE = '241'.
         endif.
       endloop.
    endmethod.

  • Quiz set with no backward movement allows additional access through TOC

    I created a quiz at the end of a training project and made these changes to the quiz preferences:
    checked shuffle answers
    checked show progress
    no check for allow backward movement
    checked show score at end of quiz
    no check for allow user to review quiz
    My intent was for the student to have one shot at passing the quiz.  However, I found that if I clicked on an item in the table of contents, I could work through the content and access the quiz again.
    Is there any way to prevent this?

    Hello Keith,
    On the first Quiz slide, where you want to disable the navigation with TOC,
    open the Slide Properties (right mouse menu)
    as action for 'On Slide Enter' choose Assign
    open the dropdown list next 'to Assign:' and choose cpLockTOC
    enter the number 1 next to 'with'
    The result should be like this screenshot:
    This will lock the TOC for this slide and subsequent slides. If you have all quiz slides together, you can wait until the first slide where you want to giver the user the ability for navigation through TOC again. Until then it is 'locked'. On the slide where you want to 'open' again, you perform the same steps I described, but change the number 1 in 0.
    Hope you understand the workflow
    Lilybiri

  • Multiple 261 movements allowed over required qty in work order

    Does anyone know why 2, 261 movements can be performed for the same components in a work order using MIGO? The transactions were performed within 2 seconds apart. Is it possible that SAP didnt update the work order within those 2 seconds?
    I have tried to duplicate this issue and I keep getting the correct message that I cannot perform over the required qty.

    It has to do with the configuration setting for the order type, verifty
    confirmation parameters for the given order type (at the header level)
    Under checks tab(Tcode: OPK4), it should be maintained as
    "  Error when overdelivery tolerance is not checked"
    If you maintain the above setting, he system would not allow you to do excess Goods Issue (mvt type 261) for the given work order
    Please come back if you have further ?s
    Edited by: Eshwer . on Jan 24, 2009 4:42 PM

  • Name "watch" as request parameter not allowed or reserved?

    Good morning, all
    I just did a strange observation about the usage of parameter name "watch" in an <f:param> tag in the following way:
    <h:commandLink action="#{MBUser.watchSelected}">
    <f:param name="watch" value="#{orgtree.identifier}"/>
    <h:outputText value="#{msg.Details}" styleClass="text_tree_link"/>
    </h:commandLink>
    This tag group is nested in a MyFaces tree2 component and the "watch" parameter is taken from the faces context in a managed bean.
    If I change the name to anything else ("xxxxx", "wat") the orgtree.identifier has the right data. Using name "watch" results in an empty request parameter value "".
    Has anybody encountered this problem? Is this problem maybe related to MyFaces?
    Thanks for sharing more information about this doubt.
    All the best,
    Alexander

    Thanks for replying.
    This is what I have in the WEB-INF/lib folder of my project:
    188.671 commons-beanutils-1.7.0.jar
    46.725 commons-codec-1.3.jar
    559.366 commons-collections-3.1.jar
    168.446 commons-digester-1.6.jar
    112.341 commons-el-1.0.jar
    22.379 commons-fileupload.jar
    207.723 commons-lang-2.1.jar
    38.015 commons-logging-1.0.4.jar
    84.462 commons-validator.jar
    112.341 commons.jar
    170.389 concurrent.jar
    1.847.334 hibernate3.jar
    65.425 jakarta-oro.jar
    665.190 jboss-aop-jdk50.jar
    285.423 jboss-aspect-library-jdk50.jar
    180.060 jboss-client.jar
    811.503 jboss-common-client.jar
    438.017 jboss-ejb3.jar
    18.037 jboss-ejb3x.jar
    424.123 jboss-j2ee.jar
    285.649 jboss-remoting.jar
    52.653 jboss-transaction-client.jar
    142.791 jbosssx-client.jar
    25.903 jnp-client.jar
    16.923 jstl-1.1.0.jar
    352.668 log4j-1.2.8.jar
    252.043 myfaces-api-1.1.3.jar
    524.026 myfaces-impl-1.1.3.jar
    17.090 portlet-api.jar
    363.490 standard.jar
    543.706 struts.jar
    1.250.136 tomahawk-1.1.2.jar
    About the problem: Maybe it is very difficult to reproduce since it sits in a complex environment, composed by a tree2 component in a panelGrid.
    Also I could fix the error by using another parameter name, so for the moment, we are not blocked, but I consider that reports of this kind can be useful to colleague developers.
    Cheers,
    Alexander

  • The Reservation item is not allowed for goods movements

      Hi Experts,
      When i do the goods movements against the reservations in
    MIGO, I encounter the below error.
      The reservation
    xxxxxxx item xxxx is not allowed for Goods Movement.
      Can you please suggest on this.
      Regards,
      Venkat.

    What is the message number ?
    Can you please check the goods movement allowed for reservation in MB22 :

  • Manual Reservation for Movement type 261

    Dear Friends,
    I want to create a manual reservation (MB21) for production order i.e. movement type 261. But system is not allowing and giving error message order category 10 (prodn order) not allowed for manual reservation.
    Can some one help to know how the setting which allows manual reservation for MVt type 261
    Thx
    Rishi

    Hi,
    After my long analyzation, I came know that, this is SAP standard setting.We cann't make any changes in order category 10. As per SAP standard procedure , the below order categories do not allow manual reservation.
    10 PP production order
    20 network
    30 maintenance order
    40 batch order (process manufacturing)
    50 inspection lot
    So please make goods issue through MB1A , if you want tracking this issue seperatly please put your production order number in text filed.
    I hope the above information is useful for you.
    Please reward points if my information useful.
    Best Regards,
    Nagapandian.

  • Movement against reservation is not there .how to do it please help

    Dear gurus
    This error in delivery at the time of PGI. The picking is also has been done.
    For reservation 6364  0145 no movement type can be posted.
    when track it in PS there is no tick in material in network in movement allowed field.
    please help me how to allow the material for movement against reservation.
    Regards
    Subrat

    NA

Maybe you are looking for

  • How can I re-establish the notification of the number of mails per folder?

    The number of emails per folder always was shown in thunderbird but with the last updates regularly is lost. In the past the columns shown with the folders could be chosen - how can this be done in the new version (v.24.6.0 under windows 8.1)?

  • Item Attachments not printing on PO

    hello.. I am trying to create attachments at the Item level with a Category of To Supplier. These attachments can be viewed on the PO by clicking on the attachment icon but do not print on the PO and are not picked up by the View Document as well. wh

  • SCSM 2012 - Self Service Portal installation Error

    Hi Everyone, I am trying to update SCSM 2010 with 2012. So far I have successfully installed Database Server and Warehouse server, and now I am trying to install the self service portal but it is giving me an error saying "Setup has failed because of

  • Capturing HDV using Adobe Premiere CS3 - more than 20 minutes of video

    Hello, I'm facing a weird situation with Adobe premiere CS3, I use a canon XH-A1 video camera to capture video & recently started using adobe premiere for editing, the issue is if I start to capture HD video for more than 20 minutes, adobe is not abl

  • Cannot Authorize My Computer for iTunes

    Hello, I hope you are well. I am running Windows 7 and have been using iTunes on this computer for about two years. About two weeks ago, all of the songs I have purchased from iTunes (a few hundred) could not be played because this computer is no lon