No music from iphone to speakers via airport express

I configured airport express via my iMac and it will stream music to my speakers fine. When I am playing music on the iphone 5 and select the airport express button, the stream doesn't play. Any ideas? Thanks!

You would need to take a look at Airfoil.

Similar Messages

  • Wireless Speakers via Airport Express

    I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
    Has anyone had similar problems and is there an answer...??????

    Check out this article:
    http://www.macfixit.com/article.php?story=20070322005336248
    I don't know if it's good or anything, but it looks like the info you want.

  • Music interrupts while listening to wireless speakers via Airport Express

    I live in an apartment building with many wi-fi connections all around me. When I listen to music via iTunes, I am regularly prompted with the following message: An error occurred while connecting to the remote speaker “Home”, that’s the name of my Airport Express attached to my speakers. An unknown error occurred (- 3256). 
This message usually appears twice in a row with a 1-3-second interval. For the song to resume I need to click Play. After play resumes, another message may appear that says: Your remote speakers cannot be found on your network. Check Airtunes configuration and network settings or choose another speaker. 
Again I have to click on Play for music to resume. This scenario keeps going on every 30-45 seconds. And yet, the light is Green on Airport Express and the network ha a check mark in front of it.
What my network name does not have in front of it is a padlock.
Today when all this happened, I lost contact with “Home” and could not regain it. So I decided to reset the AE and, in the process, noticed that the WEP key code which is 26 characters was represented by only 5-6 black dots. I replaced the code and got the network back. But still no padlock.
Is my connection secure? Will it all happen again? Why no padlock?
Sure enough, within 10 minutes the sam problem reappears. What to do?

    The trouble you are reporting sounds like WiFi connection probs. Signal quality and strength is just not sufficient to ensure a constant and high enough data transfer. I would recommend to do some test with AP and computer being rather close to each other. Its may a good idea to switch from WEb to WPA encryption.

  • Music interrupts when using iTunes & remote speakers via Airport Express

    Like many other I have had this problem.
    Short version:
    It disappeared when I turned of a wireless network expander and was only running the network with the wireless router and Airport Express on.
    Long version:
    I had the folowing setup. One Linksys wireless router, one Linksys access point configured as wireless repeater (to extend the range of my network). About in the middle my Airport Express is located. When I disconnected the Wireless Repeater the problem disappeared. My conclusion is that Airport Express was switching between the two "base stations" and that was when the interruption was created. Anyone else who has about the same setup and do experience the problem that can verify by disconnecting everything except the wireless router?

    The trouble you are reporting sounds like WiFi connection probs. Signal quality and strength is just not sufficient to ensure a constant and high enough data transfer. I would recommend to do some test with AP and computer being rather close to each other. Its may a good idea to switch from WEb to WPA encryption.

  • ITunes 8: I can no longer connect to remote speakers via Airport Express

    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility
    I get the following error code (-3256) Apple KB research says:
    AirTunes: Error -3256 when streaming to multiple AirPort Express units 
You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic.
http://docs.info.apple.com/article.html?artnum=303157
    I followed the KB link, tried KB solution, then I sent this off to Apple.
    "Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
    My G4 PowerBook running an earlier version of iTunes connects without problem.

    I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
    This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

  • Remote speakers via Airport Express no longer working on one iTunes instance

    I have iTunes on my iPhone, Windows desktop, and Windows laptop. At one time they all connected to my Airport Express with remote speakers attached. At some point, after a version upgrade, my laptop no longer sees the remote speakers while the other devices work fine. I can connect to the Airport Express from the laptop, there is no connectivity issue. I can even use the Apple Utility to read/change the settings.
    How can I get the remote speakers working again?
    Thanks, Andrew

    Hello Andrew,
    Thank you for the details of the issue you are experiencing with AirPlay through iTunes on your laptop.  I found an article with things you can check when you are not able to AirPlay. 
    I recommend following the steps in the section titled "If the AirPlay icon doesn't appear" in the article below, but this step specifically stands out to me for the situation you described:
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    You can find the full article here:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Extend wireless network from Uverse/Motorola 1ZVDC via Airport express

    After spending 2+ hours trying to extend son's network via A Express, can this be done straight from his uVerse Motorola 1ZVDC modem?  I can get the express to show up, but will not work/extend network, and doesn't show up in wireless menu; only in airport utility :-(
    Now I saw an old post which says express cannot expand network from non-apple modem.  Is this correct? I don't think he wants to pay for Extreme + express.  I am certain that, at my other residence, I am using an express directly paired to my uVerse.  Here, main residence, I have 3 paired with Extreme. 
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    His setup: OS X.6.8
    Airport: 5.6.1
    uVerse Motorola: 1ZVDC
    Apple Express:one below
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    If I give him my old extreme, what are advantages to new one?
    TY for your help.
    Ruth

    You cannot use extend to other brands.. it is apple proprietary method of repeater.
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    You can always plug in by ethernet and setup the express to create a wireless network with the same name and same credentials as the existing wireless.. this is called roaming network and is far superior to extend.
    If ethernet does not allow you to place the unit in the right place.. you can try EOP adapters. (homeplug in the US).
    If I give him my old extreme, what are advantages to new one?
    You can extend wireless by plugging the extreme into the main modem.. setup wireless to create a wireless network.. the Express can extend an apple wireless network.
    However please do understand the restrictions.. extend will halve the speed at best.. at worst it will be too slow to be usable. And the range can still be poor.. apple do not make wireless powerhouses.. they are average at best.
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    If it is a universal extender it should work but needs to be located where the signal is still good.. USB is probably just for power.
    If the computer cannot pick up wireless signal then the extender cannot work either.

  • Stream music from iPhone to stereo with air express

    Can you stream iPhone 4 music to airport express for stereo

    Yes. ref: Apple Support: Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes

  • Printing Lighter from windows to mac via airport express

    My wife has a windows vista computer and the only way she can print to our printer through the airport express is if she connects to the printer through my computer as a shared printer. Going directly to the printer via bonjour does not work.
    Anyway, whenever she prints to the printer the text is always lighter than it should be or would be if she was directly connected to the printer. My iMac prints perfectly to the printer via the AE.
    Any ideas?

    Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
    The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
    Therefore, I'm not aware of any solution to this issue.

  • Cant stream video sound from ITunes to stereo via Airport Express

    I'm using a PC with wireless (Centrino 802.11g) with Itunes (Latest release 7.0.0.70) and for some reason the sound from Itunes video will not stream wirelessly to my stereo connected to my AirPort Express.
    When the video is embedded in an Itunes playlist of MP3s, the sound will work fine through the AirPort Express with the MP3 tracks, but will toggle over to the PC speakers for the video.
    Any ideas gratefully received?

    Airtunes actually only support MP3/AAC audio streaming from iTunes. That's too bad for video.
    The things is, even with other Airtunes streaming software, the streaming delay is such that the song will be off by a few second from the video. I guess Apple have choose to do not stream video sound until this may be resolve.
    Therefore, I'm not aware of any solution to this issue.

  • Using Bose system to drive remote speakers via Airport Express / iTunes

    I want to connect my Airport Express which is configured for remote speakers in iTunes to my Bose system. My question is which input on the Bose Lifestyle 50 system do I use; ie which input on the "multi-room interface" do I connect to the AE. I think it must be the "aux" but before I buy a suitable cable I would like to be sure.

    Use a mini-jack to double RCA. That is all that I used. In the past I have used my APExpress and used the audio out port and all I needed was a mini-jack to double RCA.I have a TV, and a DVD player interfaced through my Denon AVR driving Bose Acoustimass 10 speakers.
    MJ

  • After iTunes update, can't connect to remote speakers via Airport Express

    I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
    My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
    Anyone else have/had this problem? Any ideas?

    I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
    I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
    Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

  • How do I turn on my Remote Speakers via Airport Express

    I have a remote speaker set up thru my Airport Express wireless system - - However, I don't see where I access that speaker through my ITunes program on my IMAC.  Would appreciate your help

    Try this:
    Make sure IOS is updated to latest version
    (How to update your iOS device
    http://support.apple.com/kb/HT4623)
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    How to back up and restore (iCloud and iTunes) 
    http://support.apple.com/kb/HT1766

  • Speaker volume via Airport Express

    My iTunes volume plus the volume on my speakers are both set to the maximum but the music volume is very low when I play iTunes through my speakers via Airport Express - much lower than if I plug my iPhone directly into my speakers
    Any tips on how to fix this would be much appreciated
    Thanks!

    have you tried to power cycle your gear ?
    shut everything down for 10 minutes. then, in intervals of 5 minutes, turn the modem back on, followed by the main router, the express next, and you computer last.
    does the problem persist ?

  • When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date.

    When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date. Thanks for any suggestions

    2. not that I know of
    been looking for something a bit like it got an old ipod thouch in a audio dock in the kitchen and want to give it access to all my music not just play what is synced
    so far my only options is to get an app to use upnp to get the music directly from my nas
    or get some app which require the computer to be running and running some program to handle it
    and as far as I can tell getting access to stuff synced on the atv is a no go

Maybe you are looking for

  • How to create a Dynamic IAF in WD

    Dear all, We'd like to create a dynamic interactive form based on a XDP in a WebDynpro application. How can we achieve this? We tried to use setDynamicPDF() and setInteractive(), but it looks like ADS doesn't create a dynamic pdf. Only the master pag

  • HT2905 how do I find duplicate files in itunes 11?

    how do I do this with itunes 11?

  • Using Liquid, what is the best practice for handling pagination when you have more than 500 items?

    Right now I can only get the first 500 items of my webapp, and don't know how to show the rest of the items. IN MY PAGE: {module_webapps id="16734" filter="all" template="/Layouts/WebApps/Applications/dashboard-list-a.tpl" render="collection"} IN MY

  • Buisiness rules in bpel

    How to Create a rule in Oracle Business Rules Rule Author and how to create a Decision Service Partner Link in BPEL that referers the Rule Repository and implement the same in a BPEL process. can anybody help me with an example...

  • Youtube videos causing errors in firefox

    The website I created in Muse includes 3 pages with Youtube videos. I made some minor changes to most of the pages and found that those pages containing Youtube videos are messed up in firefox. It looks like all the page content has moved to the left