No music visible after broken connection between iPod classic and pc

Hello,
I have a 4th generation 60 GB iPod classic. Model: A1099
During the connection with the PC, the usb connection was accidentally disconnected , and now music is no longer visible on the ipod
iPod is also not recognized by itunes.
I have tried to reset with no result. I am looking for an installer program to restore to factory defaults.
Can not find the software on the Apple site
Who can help me to find this software, or knows how to solve this program.
Thanks

Since you are trying to manually manage the iPod's contents (a.k.a. dragging and dropping content onto it) have you double checked to make sure the Manually manage music and videos option is enabled from under the iPod's Summary tab?
If that is not the case, what happens when you try to drag and drop songs onto it? Any error messages?
B-rock

Similar Messages

Capital letters in artist name. Difference between ipod classic and iPhone

My ipod classic knows that "Peter Gabriel" and "peter gabriel" is the same artist. But the iphone distinguishes between the 2. This is a really annoying "feature". How come it's different? My wishlist for a iOs 4,1,1 update would be for this feature to be disabled so capital letters does not confuse the ipod software on the iphone.

Sorry, should have said that the iPhone is a 16Gb version not 8
Roger

No connection between ipod/ipad and itunes/ laptop

i have an ipod touch 32gb 2nd gen and a 3rd gen ipad 16gb wifi only and neither will connect to itunes. i have an emachines laptop and worked perfectly before. have tried so many of the suggestions online everywhere and nothing. any ideas?

Since you are trying to manually manage the iPod's contents (a.k.a. dragging and dropping content onto it) have you double checked to make sure the Manually manage music and videos option is enabled from under the iPod's Summary tab?
If that is not the case, what happens when you try to drag and drop songs onto it? Any error messages?
B-rock

Itunes keeps shutting down when I connect my IPod Classic

Itunes shuts down whenever I connect my IPOD classic and sync attempts to start. I have had this IPod for several years and I have had Windows 7 for over 6 months. I am trying to update versions, but I get an error message with that also.I have also seen posts on Microsoft and they aren't helpful.....I have seen many posts on Itunes also regarding same issue. What is up when the company will not fix their problems with the products?

I downloaded the 64bit system....did it like 3 times. Finally, I found some other helpful hints. I tried loading ITUNES in safe mode, still couldn't get it to not shutdown once I connected the IPod, I then logged into one of my other user accounts, then I was able to restore the settings, however, it removed all my songs and syned with the Itunes on that user acct (which was my nano IPod). That was ok, because then I was able to go back to my regular account and sync and updated all my songs....just had to have my kids authorize me again on Itunes. Think it's a racket to keep upgrading, changing things and not supporting the stuff that still works.....my classic works just fine nd holds 5,000 songs...I only have about 1500; so I have long way to go. When my display cracked and the LCD was all messed up. I sent it to IFIXIPODS fast.com and they replaced it, quick and cheap--hats off to them!

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

After I connect an ipod thro a usb cable, firefox will not load, but other browsers work fine.?

Firefox works fine and is my preferred browser, but after I connect an ipod to my computer it will not load. Even after the ipod has been removed firefox will still not load until the pc is restarted.

Open the Windows Task Manager > Processes Tab and see if there is a '''firefox.exe''' process running, when you can't open Firefox and you find it necessary ti restart your PC. When you try to open Firefox and a firefox.exe process is "hung", you should get a warning message that ''' "Firefox is already running" '''.

Have ipod classic and after performing synch have lost almost 800 songs - how do i find the missing music please

have ipod classic and after performing synch on this occasion have lost almost 800 songs and they do not appear in my library either.

If the music has disappeared from your iPod and is not in your iTunes library, I'm afraid you are out of luck. If the lost music was imported from CD's are from outside the iTunes store, you'll need to reimport each of those tracks.
Otherwise, if the music was purchased from the iTunes store and you are using iTunes 10.3 or later and living in the US, you can redownload it again at no cost. See this article for more details.
http://support.apple.com/kb/ht2519
B-rock

CAN I CONNECT MY IPOD CLASSIC TO ANY COMPUTER AND UPDATE ANY MUSIC THAT I HAVE PURCHASED FROM ITUNES ON MY IPAD?

CAN I CONNECT MY IPOD CLASSIC TO ANY COMPUTER AND UPDATE ANY MUSIC THAT I HAVE PURCHASED FROM ITUNES ON MY IPAD?

Plug the iPod into the new computer. When it pops up on the left sidebar, right-click on the iPod and select "Transfer Purchases". Make sure that you Authorize the computer to play content purchased with that account, or else the music will not play.

After iTunes 10 upgrade iPod Classic not identified nor can I restore

Totally lost and don't know how to proceed. I have been using iTunes with my iPhone with never a problem. I received an iPod classic 160GB for Christmas last year and again, no problems, everything has been working great.
I am using Windows 7 Ultimate 64bit. I upgraded to iTunes 10 and iTunes works great. I plugged in my iPhone 2G, no problem. I plugged in my iPod Classic 160GB and iTunes freezes, NOTHING happens at all. The album cover pictures don't even display until after I unplug the iPod Classic device.
I can see iPod device in "My Computer" but not in iTunes 10. In iTunes 10 the device doesn't appear at all until I give up and unplug the device. Then an error message pops up and the iPod is shown in the left column. The error says a file is missing and the device can't sync. I can't do anything except click OK. Then the error message goes away and the device drops out of the left column.
I searched for info on this problem, and have tried all of the suggestions.
It charges through USB with no problem except the battery is fully charged.
I tried 3 different USB ports on the PC.
Tried restarting iTunes.
Tried restarting the computer.
Went to Apple support website, tried the troubleshooting assistant:
*Reset the iPod.
*Had already tried different USB ports.
*Had already tried restarting the PC.
*Removed iTunes 10 and all the software programs in the order specified.
*Went to Apple website and Re-installed iTunes.
*ITunes and iPhone still work fine, NO iPod Classic recognition in iTunes.
*Next option is to Restore but CAN'T because iTunes won't recognize the iPod to perform Restore. After reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
Is there anyone who can help? This didn'thappen until installed iTunes 10.
The iPod has 120GB of music on the device. The device is still working fine. I just can't get iTunes 10 to recognize the iPod Classic device.

After upgrading to iTunes 10, when I tried to connect my 80GB iPod Classic to my Mac Book Pro, the iPod was not recognized by either my computer or by iTunes. It would say "Connecting" on the iPod, but then it would click and show the Apple icon for a few seconds, then the cycle would repeat.
I finally decided to start the iPod in Disk Mode and then connect to my computer. When I did that, it would connect to my iTunes and I was able to sync.
I then went to Disk Utility and verified and repaired my iPod disk (no problems and nothing to repair.) On one discussion, the person then erased everything from his iPod and then restored. Rather than do that, I disconnected my iPod and re-connected it in the standard mode. This time, it was recognized by iTunes and I was able to sync.
Tried it again this morning and again it was able to sync. The next time, it may not, but right now it appears that might be a possible solution.

I can't connect my iPod classic to iTunes, it just doesn't react when I put the USB into the PC

hey, I have an iPod classic and it can't connect to iTunes.
I put the USB into my computer trying to add music, but it doesn't seems to react.
It DOESN'T say that it can't recognize the Ipod..
- Itunes just simpely doesn't react when I put the USB-cabel into my computer.
- when i go to the task manager the "apple device mobile" and "ipod service" is acitve in the processes
- I've tried to restart my computer (windows XP)
- update iTunes
- reinstall iTunes
- restart my apple devices mobile manager
what I think is the problem (which I can't solve) is that iTunes doen't even react to the USB
plz hlp me!
- ps it really should be able to add music to my iPod without getting help from a expert.

Hello qz0rz213,
It would seem that iTunes has encountered or developed an issue in the process of trying to sync photos to your device. The best place to start would be removing the iPod Photo Cache (thus allowing for a new version to be created).
Note: Deleting this folder will not remove the original images from your library.
iTunes: Understanding the iPod Photo Cache folder
http://support.apple.com/kb/TS1314
If the issue is not resolved by removing the iPod Photo Cache, the following article goes into further steps that can both help you determine the source of this trouble and eliminate it.
Symptoms
In certain situations, iTunes may display an alert or may be unable to sync photos to an iPod or iOS device. Examples include:
After updating iOS, iTunes displays an alert that there is not enough room to sync photos
This error appears: "The iPhone/iPod touch '[device name]' cannot be synced. The required file cannot be found."
This article outlines steps to resolve these issues.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Cheers,
Allen

I've just downloaded itunes 12 and when I connect my IPod classic 160gb, I tunes shows it'sP name briefly and then then ipod silhouette at the top left simply greys out and nothing else happens. Please advise.

I've just downloaded itunes 12 onto my pc. When I connect my IPod classic 160gb, it's name shows up briefly before the ipod silhouette at the top left simply greys out and nothing happens.
Please advise.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

No music visible after broken connection between iPod classic and pc

Similar Messages

Maybe you are looking for