No music when i burn my slide show to dvd in idvd

I selected the share to burn I slide show. This opened the idvd and transfered the info to it. I was able to burn a dvd, but the music did not transfer.
I am not able to open and edit the drop box to add music. I dont know what to try. Thanks.

Thanks so much for your possible solution. If I can pull this off , I will no longer curse adobe PSE 13.
I'm still a long was off to accomplish this goal but I will surely give it a try. H264 (mp4) is still Greek to me.

Similar Messages

I am using IDVD to make slide shows. The pictures are clear and of good quality. When I burn the slide show to a disk, the pictures are blurry and of poor quality. Is there a setting for quality of picture in burning a disk?

I am using IDVD to make slide shows. The pictures are clear and of high quality when viewed on my computer. When I burn the slide show to a disk, the pictures are blury and of poor quality. Is there a setting adjustment to correct this problem?

I would re-post in the iDVD forum. You are likely to get a faster answer there. Good luck.

I am using using IDVD to create slide shows. When viewed on my computer the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blurry and of poor quality.

I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.

The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.

Burning a slide show on DVD

I've created a slide show in iPhoto using a song which plays 2 1/2 times. When I try to burn the slide show on to a DVD It only plays the song once and stops. How do I burn the slide show at its full length?

As per my understanding, you created a slideshow in PSE organizer and now want to burn into DVD using Output dialog which launches PRE...
Which application crashes and at which step??
Through PSE you can output the video into PDF or Video...

Why can't I burn my slide show to DVD in photoshop elements 13. Do I have to buy another program update .?

Photo shop elements make a nice slide show but will not let me burn it to DVD which makes it useless to me.
How do I get the photoshop slide show to burn in another program.?

Thanks so much for your possible solution. If I can pull this off , I will no longer curse adobe PSE 13.
I'm still a long was off to accomplish this goal but I will surely give it a try. H264 (mp4) is still Greek to me.

How do I burn a slide show to dvd that will play in a dvd player

I want to burn a slideshow from iphoto to a dvd to show on a tv using a dvd player. I'm running Mountain Lion.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

How do I burn a slide show onto dvd in yosemite?

I don't get it. I mean I've burned a few disk. Ones a mp4, and the other is file or something. I don't understand. It seems apple is making things more difficult. Can someone help me out? i have a mid 12 MacBook pro.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

How to burn decent resolution slide show onto DVD ?

First of all I'm a newbie to this (PS8 Elements and Premier). I have a slide show with music in "Slide Show Editor". When I view this slide show in 'Full Screen Preview" I see a decent resolution but when I burn the slide show onto a DVD the resolution sucks if it's shown in "Full Screen". ( the slide show looks decent if shown in a smaller screen). I took the pictures with a 7 mega pixel camera. Another thing that happens when viewing "Full Screen" in the burned DVD is the text (if it fills the whole screen) some text is hidden around the borders.I burn the DVD in the Premier program.

Thanks for your reply. I'll try what you typed but the
hard part will be figuring how .

How do I burn a slide show to a DVD?

When I burn a slide show I created on Photoshop Elements 11 to a DVD using Premier Elements 11, only the botton half of the photos are copied. How do I correct this?

drfsf
There is a problem with 1/2 wmv display related to a recent Windows Update kb. The issue is highlighted in the Announcement at the topic of this forum and has been discussed in numerous threads here. For your convenience, the Announcement looks like the following:
Announcement: Windows Update Causes Half of Display to Be Blacked Out
Hide Details
MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
"MS bulliten MS13-057. Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
For us, it occurs when decoding WMV9 files. Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
You can uninstall these Windows Updates to resolve your problem."
There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
by Bill Hunt (Aug 2, 2013)
The general suggestions in the threads have included
a. For now, set up Windows Updates to require notification and your approval before any downloading and installing of them.
b. If you catch the offending Windows Update kb in the Important Updates, right click it and select Hide. That is supposed to keep it gone.
Your problem mostly likely popped up when you selected a route that involved the transfer of the slideshow as a .wmv file. You should be OK after deleting the indicated Windows Update kb. But, consider using the Photoshop Elements Slideshow Editor Output option Edit With Premiere Elements which sends the slideshow over to Premiere Elements in a non wmv format. If you go this route, the slideshow can be broken apart for further significant edits with the Break Apart Elements Organizer Slideshow command.
Please review. If any questions, please do not hesitate ot ask.
Thanks.
ATr

How can I burn a slide show to a dvd?

I have tried, every way, possible to burn a slide show with music to a dvd and I did so successfully except that it will only play in a play station 3 unit and not correctly play on any computer or dvd player. I have tried several ways:
-Creating it as an image saving it to my desktop and burning it from disk utilities
-Creating it in iDVD and burning it that way
I AM using a DVD-R
So, again it will play in the playstation but not on dvd players
WHAT CAN I DO??
When I burned it using the whole image thing & disc utilities, it burned the slide show correctly but NO music. I would really appreciate your help

Sorry, was trying to get all of these.
Have a look at these for help:
http://discussions.apple.com/thread.jspa?threadID=967804&tstart=0
http://discussions.apple.com/thread.jspa?messageID=7814936&#7814936
http://discussions.apple.com/thread.jspa?messageID=7503940&#7503940
http://discussions.apple.com/thread.jspa?messageID=9312008&#9312008

After burning a slide show, I get a skip in audio

After burning a slide show, II get a skip in the audio about every 5 min. of run time. I imported the pictures from i photo and the music from an itunes play list. When I play the entire thing in preview it runs fine with no problems, but after burning to a dvd, I get a skip every 5 min. I burned to hp DVD-R (16x) and Memorex DVD-R (16x). Still the skip. I have burned to Best preformance, High Quality and Professional Quality. I have even slowed the burn time to 4x. Still the skip. I noticed the bar at the bottom of the screen always reads 5 min. for the audio duration and when it goes back to 0 is when it skips. The run time when I put the cursor on the audio well reads the correct 3min:35sec.

SlideShow function in iDVD - is limited to 99 photos per show.
Creating the SlideShow in iMovie HD6 or FinalCut - doesn't limit this but offers 100% control over process (audio and transitions)
Using iMovie'08 or 09 or 11 - will degrade picture quality as they only deliver every second line over to iDVD.
I never use "Share to iDVD" in any iMovie version.
• iMovie up to HD6 - Just close it and import movie project from within iDVD
• iMovie'08 to 11 - "Share to Media Browser" and as Large (not HD) will give as good quality as they can do
Yours Bengt W

Is it possible to burn a slide show onto a Blu-ray DVD ?

Using PS8 Premier I could't burn my slide show ( no movies ) with music onto a Blu-ray DVD. The problem seems to be......low memory. ( my computer has 2 Gig but my project which doesn't seem that involved has over 4 or 5 Gig ). The reason I want to burn onto Blu-ray is to get a clearer project than I was able to on a regular DVD. I get a good slide show on my cpu monitor and also on a regular DVD in the smaller screen of the burner program but the project loses resolution when going to full screen. That is why I wanna try it on Blu-ray.

If you are going to BD, then I would start with a BD Preset. This ARTICLE will tell you the supported Frame Sizes, and FPS.
I would choose the 1920 x 1080 @ 29.97 FPS Interlaced (NTSC), or 25 FPS Interlaced (PAL). I would then go to my original stills and Scale them to ~ 1920 x 1080 in PS/PSE. This ARTICLE will give you tips on doing that with automation in either image editing program. Import those Scaled Images into PrE, with the Duration that you feel is correct, depending on the "flow" of the SlideShow. Note: you can tweak that Duration for each Image, if needed, but by planning a bit, most will not need any tweaking. Then, add any Pans, or Zooms (Effect>Motion>Scale, and/or Motion>Position). Add any Transitions desired, and edit any Audio. Add the desired BD Menus and Chapter Markers (no Stop Marker at the end of the Timeline). This Project should burn to BD easily.
Good luck, and hope that it helps,
Hunt
Note: in the first linked article, you will see that 20 FPS is not supported, and neither is 1 FPS. You can, of course, make the Duration of each Image 1 Frame, but will probably want the Image on-screen for longer, say 5 - 10 secs.

Do I Have to Upgrade to Premier in order to burn a slide show to CD or DVD if it has an audio track?

I currently have PSE 8. I have successfully created my first slide show that incorporates a purchased audio track downloaded from internet. It plays just fine on my computer, but when I try to burn it to disc I only get the slide show without music. This is for an anniversary, so I am on a deadline to fix this dilemma. Can anyone help me?

Do you know if it is Vista Home Premium?
If yes or if you are not sure, look for Windows DVD Maker,
On my Vista Home Premium laptop whe I click on "All Pprograms", within the list of programs I see "Windows DVD Maker" listed as a program.
If you have this program then my suggestion is to use the PSE slide show editor to Output a file to your hard disk
(use the
-- the "Save to a File" instead of the "Burn to a Disc"
and
-- the "Movie File - .wmv"
and for slide size choose:
DVD-NTSC if in USA
or DVD-PAL if in Europe or other PAL TV country
Save the wmv file in a hard drive folder where it will be convenient for you to reference for later use in the Windows DVD Maker program.
Once this wmv file has been successfully created, you can play it back with Windows Media Player to verify that you like its contents.
Your next step will be to use the Windows DVD Maker program to write the formats of movie files required for the TV DVD player playback to the DVD disc. I recommend closing Photoshop Elements and then open Windows DVD Maker from the Windows Start menu list.
Windows DVD Maker is a "follow the instructions on the screen" program.
However, one point of confusion is how to add the PSE created slide show to DVD Maker program.
The answer is that you use that .wmv file (from the PSE slide show editor) -- it is now in a video format and is a "video". So you can follow the onscreen directions to add video to DVD Maker.
Note 1: I recommended closing PSE before starting the Windows DVD Maker in order to conserve your PC system resources. It is probably not absolutely necessary.
Note 2: You could also produce the DVD for TV playback by adding Adobe Premiere Elements to your computer. However just for the purpose of making the DVD from your slideshow I anticipate that using Windows DVD Maker will be simpler and faster.
Note 3: I recommend using a DVD-R disc. What brand of discs do you have?

Can I burn a slide show on to a DVD RW ?

Can I burn a slide show on to a DVD RW

Thanks but I keep getting" insert blank disk"when I thought I had burnt the slide show. What's happening?

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

Oroilore-
I do not see a way to disable the Picture Frame icon. I looked at Settings-Picture Frame, but none of the options turns it off. The only way I can thinik of, would be if all of your photos had been deleted. If there were no photos, you couldn't have a slide show!
One thing to try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

No music when i burn my slide show to dvd in idvd

Similar Messages

Maybe you are looking for