No Name Display under Lock Mode

When my Blackberry Curve 8900 is locked and I get an incoming call, I do not see the incoming caller's name displayed. I just see the number. In the past I did not face this issue. Is there some setting I need to change on the instrument or I need help from a Blackberry tech person.

Apparently it's something which needs changing on the Bes server and not the handset, assuming you've not got your contacts encrypted.

Similar Messages

I downloaded Mtn. Lion about three weeks ago to my early 2008 24" IMAC. Logging in generates all sort of weird graphics and finally a lock up. Unusable except under safe mode.

I have been on the phone with technical service twice ( both as helpful as they could be) and took the computer into the apple store to have the hardware checked out. All of the hardware checked out. They installed Lion in place which is useless to our family as the last backup was done under Mtn. Lion in safe mode. I reinstalled everthing from the backup and can work from safe mode but this has its obvious disadvantages.
What happens is when (if I get this far) I log in, the desktop graphics go "crazy" and eventually the computer locks up. I have reinstalled Mtn. Lion numerous times with no improvement to the situation. I post this out of frustration and hoped for answers. That $20 download is not worth the cost of the loss of use of the Office programs, the Adobe programs not to mention photos, teaching documents, scouting documents, family documents, music, that are all somewhat in limbo because of this mess.
As a long time Apple product user I have not come to expect this kind of problem from Apple products. I have not been advised of how I will know when a "fix" has been arrived at leaving me further in the dark and discouraged. School is starting up on Monday and this computer gets a lot of use from both a teacher and a High School student.
Apple, you said that our particular model was compatible with Mtn. Lion. It has been checked out at the local Apple store and everything found to be OK. Our backup is under Mtn. Lion (running in Safe Mode). We have no way to go back to Snow Leopard to retrieve and run all of our previous programs. So Apple, the ball is 100% in your court. When are we going to have the solution?

Well I believe I was able to clear those two programs out. I still had the dmg files with each having an uninstall. VirtualBox was a clean uninstall and while the Palm SDK would seem to be gone it was not as clean an uninstall, having repeated it several times.
I have since restarted three times, once after pulling the plug from the back and waiting for several minutes. One time I thought it was going to be stable but after about 2 minutes it started with the graphics problem again and then finally locked up.
Could Skype or Flash have something to do with this?
Here is the latest dump under Safe Mode:
Last login: Sat Aug 18 16:06:35 on console
Macintosh-2:~ MMLyonsHome$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
HPDeviceModel.framework
HPPml.framework
HPSMART.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Internet Plug-Ins (Disabled):
Flash Player.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.hp.devicemonitor.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.adobe.versioncueCS3.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
VersionCueCS3.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
HP IO
HP Trap Monitor
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Macintosh-2:~ MMLyonsHome$

I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out

I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next try Safe Mode boot and and then normal boot
OS X: What is Safe Boot, Safe Mode?

When my iphone4 is under the locked mode, ipod can only play two songs at most, and then the system collapses

When my iphone4 is under the locked mode, ipod can only play two songs at most, and then the system collapses, the screen is black and responds to no commends, not until I restart the machine. but the ipod function can work well under the normal mode, is it any hardware problem? thank Q!!

Do you mean crashes?
Try doing a full reset. otherwise it sounds like you might want to walk it into the nearest Apple Store and get an opinion there.
Good luck in any case.

Device Name Displayed on Home Control App

OK, here's an odd one. One of my Door / Window Sensors will not display it's proper name on the Home Control app. When viewing my devices through a web browser, the device displays it's proper name of "Front Door Sensor". But on the Home Control app for iPhone, it displays the default name "Door and Wind...". But, if I refresh the display by pulling the screen down, the proper name displays for a few seconds before reverting back to the default name.
I have not tried deleting and reinstalling the device yet but I have tried renaming it several times to no avail. Any Modes or Alerts associated to that sensor work properly and display the proper name in a web browser, it just does not display the proper name on the Home Control app.

Hi shaenn,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

"My Music" app .. song name displayed in error

Hi,
I have a C1-01. I have stored some mp3s on the memory card, and I checked with an ID3 editor on my PC, they have their ID3 tags correct. But in the "My Music" app on the phone, when I go to "All Songs", many songs have their name displayed in error (they have extra information that I deleted from their ID3 tag). Eg: I have changed the "title" field of a song to say "Welcome", but in the song list, it is displayed as "Welcome - mp3albums.net". I checked with the ID3 editor software on my computer, the song has just "Welcome" for its title field. The music player on the phone is picking up the extra information from I don't know where. I updated the music library on the phone, it doesn't help. Switched off the phone, removed the battery, waited for a few minutes, switched on, same problem. Deleted temp files on the memory card, and the .trash folder on the card, same problem. Any ideas?
Also, is it possible to change the font size in the music player to extra small font?
(My phone has the latest software update, version 5.50)
Thanks.

There are several versions of ID3, did you change ID3v1? or V2? what editor do you use anyway? I've found mp3tag to always be correct
If you find my post helpful please click the green star on the left under the avatar. Thanks.

IPod is on LOCKED MODE but I don't remember the password - What should I do

My ipod turned itself on lock mode and I don't remember assign it any password. What should I do ?

Connect the iPod to the main computer you use it with (if you use it with more than one, this is the first one it was connected to) and open iTunes. Then disconnect iPod from the computer, it should be unlocked: iPod: How to use the Screen Lock
If you can't get it unlocked you'll need to restore it. Just be aware that restoring will erase the iPod's hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Turn off adaptive display for AC mode

Hi,
I am in curiosity of how I can turn off adaptive brightness display for external mode.
http://i.imgur.com/nnDnd9Y.jpg
I have already turned it off from Power Options in Control Panel. At first, this did not work alone to turn adaptive brightness off so I also disabled Display Power Saving Technology for battery mode from Intel Graphics Control Panel.
This works like a charm for battery mode but adaptive display is still active when on external power and I could not find an option to disable it in Intel Graphics Control Panel, there isn't Display Power Saving Technology for external power.
http://i.imgur.com/WtLe6kB.jpg
So, how can I stop adaptive brightness for AC power before I go blind of the abrupt changes in brightness when I'm plugged in to the wall?
Any help is appriciated.
Thanks!
This question was solved.
View Solution.

Hi @yldzanl ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15 Notebook and wanted to turn down the brightness on AC mode. On your first screen shot it shows you under the Edit settings. You will notice adjust brightness one for battery mode and the other for AC adapter, they are not the same.
Change this to be the same for battery and save settings.
Thanks should take care of it.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Ipod frozen on lock mode

My ipod is frozen on lock mode and i have a big flight in a few hours what do i do?? My computer won't even reconize when my ipod is plugged in and neither does my ipod.

Important: If your iPod is frozen or won't turn on, it may be because iPod is paused or the Hold switch is in the locked position. If so, a lock symbol appears on the screen. Slide the Hold switch to the unlocked position and check the screen.
If your iPod is frozen or won't turn on, the steps to reset it vary by model. You can easily tell which iPod model you have if you're not sure.
Products AffectediPod nano, iPod mini, iPod
To reset an iPod with a Click Wheel, including:
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano
iPod classic iPod (5th generation)
iPod with color display (iPod photo)
iPod (Click Wheel)
iPod mini
iPod mini (2nd generation)
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
To reset iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons simultaneously until the Apple/iPod logo appears, about 6 to 8 seconds. You may need to repeat this step.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
If you are still unable to reset your iPod, use only one finger from one hand to press the Center (Select) button, and one finger from the other hand to press the Menu button.
When you reset iPod all your music and files are saved, but some customized settings may be lost. Date and time are preserved (unless the iPod reset itself because it had no power and then was reconnected to power). Other customized settings, such as Bookmarks, On-The-Go Playlists, Shuffle, Backlight timer, and so forth are preserved from the last time the hard drive turned on.
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position.
Tip: When iPod shuffle is off, the green stripe by the switch is not visible.
Wait 5 seconds.
Move the switch to the play in order or the shuffle position. The green stripe will be visible in either position. For iPod shuffle (2nd generation), slide the power switch on (and you can see the green stripe).

Decline calls in lock mode is not appearing on screen to call back the same numbers.

Hi,
After updating IOS 7 on my iphone 4.
Decline calls in lock mode is not appearing on screen to call back the same numbers.(Ex.. Phone is in lock mode when calls comes we will decline the same by double click the power button, But same call number R contact is not appearing in screen to call back them, & Aslo now it is very very slow.. Kindly Help the same.. )

So then this means your Energy Saver preferences are corrupted somewhere. I would at least backup your data in case something else gets corrupted by a damaged directory, or the hard drive is beginning to show signs of its dying, or you find you might later need to repair your directory. Regardless, I wouldn't update your software until you find out why your Energy Saver doesn't work properly with the only third party item being a display.

What are the lock modes in Lock object

What are the lock modes in Lock object ?
what are the divfferences between
Exclusive , cumulative
Shared
Exclusive , not cumulative
Could any body explain what happens in each table lock ?
How the lock consists ?

HI
Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm</a>
Regards,
Gunasree.

Unable to pick the call when 5800 is in lock mode ...

HI,
My 5800 mobile has been updated with V40.0.005.C03.01 through nokia service center.
After this instalation, I have faced following problems in LOCK MODE. I am not sure, whether it is setting problem or software bug.
1. In lock mode, whenever I get a call, I am not able to receive the call or unlock using touch screen buttons, though it displays 2 buttons in screen. 2 Buttons: Answer & Unlock.
But I can use the physical buttons(Grean & Red) to receive or cancel the call and I can unlock the mobile using side physical scroll button. So why these touch screen buttons (Answer & Unlock) not working, in lock mode.
2. In lock mode, I can't snooze or stop the alarm using touch screen buttons, though it displays 2 buttons in screen. 2 Buttons: Stop & Snooze. But I can use only Red physical button to snooze. But I can't use any other buttons niether physical nor touch buttons to stop the alarm. Only way to stop the alarm is first snooze the alarm using Red physical button, then unlock the mobile using side physical scroll button, then goto clock, check the alarms list, then click on remove touch button. So why these touch screen buttons (Stop & Snooze) not working, in lock mode.
This is happening only after software update to V40.0.005.C03.01 . I am not sure, whether it is setting problem or new software bug.
Thanks.
Prakash
Solved!
Go to Solution.

Don't really wanna do the hard re-set and loose everything on the phone and start from scratch again. I took it to the retailer that sold the phone to me last week and they want to replace it with a brand new one, as they think it's a fault with the phone. While am happy to get a brand new one, I don't wanna do that either and go through downloading all the applications I have downloaded on mine, especially knowing that this retailer only has in stock the 5800 phone with V20 loaded on them from the factory, so I will end-up going through the software upgrade process all over again to V31 and probably face the same problem at the end.
I think I will just get used to answering the calls using the green button instead.
Thanks,
Jalal
Sydney-Australia

Dear concern try to understand what i am asking to you that some one calling me and my phone is ringing or that time i am nt using my phone that is in lock mode that time if i want to disconnect that call without using sleep/wakeup botton.So tell me

Dear concern try to understand what i am asking to you that some one calling me and my phone is ringing or that time i am nt using my phone that is in lock mode that time if i want to disconnect that call without using sleep/wakeup botton.So tell me another way to disconect that call in given situation.kindy suggest.

3 topics with the same question?
Please stop creating new topics & start using the ones you already created, they are listed under your activity (click your own username).
kumar kalptaru

Error Message: A crash occured on (date) at (time) while running "Applications": Memorymgr.c, Line:5346, Chunk under-locked

I keep getting the following warning:
A crash occured on (date) at (time) while running "Applications": Memorymgr.c, Line:5346, Chunk under-locked
What is causing this? It usually happens overnight while I'm not using my phone... so the first time I touch it in the morning it shuts off and resets. The problem started occuring after Sprint switched from "On Demand" to "Pocket Express". I had no idea of the switch, so when I clicked on it the phone automatically updated to the new application. Since then, my phone has been a mess. I deleted the application, performed a hard reset and downloaded it on my phone again.. but still there's problems. This morning, I deleted the "Pocket Express" for good. I figured it wasn't worth it if it's causing all these problems.
Help... please. I'm a novice, so please make sure the solution is something I can understand. Also, do I need to go through my Palm Desktop/Hot Sync program on my computer and delet files too?
Thank you in advance.
Phone: Treo 755p
Carrier: Sprint
P.S. I also just installed the Sprint Treo software update: Treo755p-1.07-SPNT
It cleaned things up... but not for long.
Post relates to: Treo 755p (Sprint)

After a hard reset and after you delete the program on the device, you will need to rename the backup folder in your username folder on the PC. The backup folder contains all 3rd party programs and settings for your device. When you sync, the backup folder is reloaded onto your device and will bring back the 3rd party programs.
Follow the instructions below for the procedure I described.
Looks like you may need to hard reset and rename your backup folder if you go
to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the
directions to do a hard reset. Next before you hotsync your data back over
you will need to rename your backup folder to do that go here
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.Find your username folder
Post relates to: Palm i705

On my ipnone 3gs the ipod play symbols appear on screen in locked mode???

when my ipnone 3gs is in lock mode, sometimes the play symbol from the ipod apperas on top half of the screen? anyone know why is it doing this? please help

Double-tapping the "Home" button at the bottom of the iPhone when in locked mode displays/hides the play/pause etc symbols, so that you can control your music without having to unlock your phone

No Name Display under Lock Mode

Similar Messages

Maybe you are looking for