No name screen display receiving texts

Hi
When I receive CALLS, the name in the Phonebook appears on the screen. But when I receive TEXTS then only the number appears. Can anyone tell me what I'm doing wrong please? I want the name to appear in both cases. The Phonebook is on the simcard. TIA Steve

do you have saved the names of the persons who send message for you?
if yes,do you saved this person in your contact and sim card memory at the same name?
at the finall whats your phones model?
NOKIA means:Night Of King In Alone

Similar Messages

  • Contact name not displaying for texts/messages, only phone number does

    When I turn on my iPhone 6 (iOS 8.0.2) in the morning (I shut it off at night), any received text messages (iMessages or standard texts) only show the phone number of the person who sent the text and the standard tone for texts is heard, when it should display the name and play the special text tone I setup on specific contact records.  It is not til after I use the Touch ID or enter my passcode that the name of the contact who sent the text displays AND the special text tone for that contact is heard.  This not normal behavior.  Even upon startup on my former iPhone (5), any texts received displayed the contact name and played the appropriate tone when the phone was turned on during the morning.  HELP!  I believe this is a bug; but, would like to have this confirmed.  If it's a setting or combination of settings that I'm missing in iOS 8.0.2, please let me know. 
    My contacts have never been stored in iCloud nor do I plan to use iCloud.
    Thanks!

    Try this: when device is ON remove the battery, wait a minute and turn the battery back to the device.

  • Adding own name in Receiver Text file in receiver FCC

    hi,
    In my receiver file CC(using file content conversion)
    I want to add some names on the receiver text file name automatically.
    sender is R3 that is IDOC as MI.
    In that field called CURCY on one segment and country one segment.
    ex.
    Now the receiver file name in FTP server (example)
    Result_report_20070721-104810-765.txt
    i want to get CURCY, COUNTRY field value on receiver file name in FTP server (it varies)
    example:
    Result_report_USD_USA_20070721-104810-765.txt
    Result_report_EURO_DE_20070721-104810-765.txt
    Result_report_EURO_FR_20070721-104810-765.txt
    Thanks

    hi,
    I am getting error in my message monitoring like message are in HOLDING bec of mistake which i made in Receiver FILE CC
    as i said:
    I followed my help.sap.com link to do this req.
    In my receiver file CC(using file content conversion)
    I want to add some names on the receiver text file name automatically.
    sender is R3 that is IDOC as MI.
    In that field called CURCY on one segment and country one segment.
    ex.
    Now the receiver file name in FTP server (example)
    Result_report_20070721-104810-765.txt
    i want to get CURCY, COUNTRY field value on receiver file name in FTP server (it varies)
    example:
    Result_report_USD_USA_20070721-104810-765.txt
    Result_report_EURO_DE_20070721-104810-765.txt
    Result_report_EURO_FR_20070721-104810-765.txt
    My message mapping is
    Source is IDOC occurence is 1
    Receiver File adapter: 0 to unbounded
    My message type on receiver is
    MT_Receiver
    DT_Receiversub1 (under MT_receiver)
    COUNTRY (third value under DT_DT_Receiversub1)
    I have mentioned in receiver FILE CC advanced variable substitution like this:
    variable Name :    var1
    Reference:    payload:DT_Receiversub1,3
    I am not receiving my file in Receiver FTP server.
    The mesage are on HOLDING in message monitoring
    Thanks

  • Display long text of characteristic in Query name

    Hi All,
    I have implemented RRI between my sender and receiver query.
    When user will click on WBS Element in my sender query <b>the receiver query name will be the name of that WBS Element.</b>
    After execution,I am able to see the Short text associated with Characteristic WBS ELement but<b> i want to display Long text of WBS Element in Receiver query name</b>.
    I have tried to implement the same logic as suggested by Bhanu in following blog:
    <u>Variable screen in Web report</u>
    Kindly,suggest the appropriate solution for this issue.
    Thanks in advance.

    Hi All,
    I am still facing the same problem.
    Kindly suggest me the appropriate solution for displaying WBS Element's Long Text in Receiver's Query Name.
    Thanks in advance.
    Best Regards,
    Nilima Rodrigues

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • How to display  LONG TEXT STRING in Module Pool Screen ?

    Hi Experts,
    I want to display long text string, on screen designed through module pool(SE51). I tried to display through input/output field , but it displays it in SINGLE LINE and i have to scroll all through to view all string.
    I want to display it in rectangular format . It doesnt allow me to set HEIGHT of component.
    Please provide solution.
    Thanks in advance.
    Regards
    Deepak

    This is the program where u can get the WA_THEAD from other program like report and trying to display and modifying that text. U can do instead of WA_THEAD u can generate here itself and use also
    *& Module pool       ZMP_LTEXT                                         *
    PROGRAM  ZMP_LTEXT                               .
    TABLES: STXL.
    *&      Module  STATUS_9000  OUTPUT
    MODULE STATUS_9000 OUTPUT.
    CONSTANTS:line_length type i value 132.
    DATA:g_editor type ref to cl_gui_textedit,
         g_editor_container type ref to cl_gui_custom_container,
         CONT1 type scrfname value 'CONT1',
         g_repid like sy-repid,
         g_ok_code like sy-ucomm,
         g_mytable(132) type c occurs 0,
         g_mycontainer(30) type c ,
         v_result(256) type c,
         g_head like thead,
         it_line type table of tline with header line,
         wa_stxl type stxl.
    DATA : BEGIN OF IT_THEAD1,
           ICON TYPE ICON-ID.
           INCLUDE STRUCTURE STXL.
    DATA : END OF IT_THEAD1.
    DATA : IT_THEAD LIKE TABLE OF IT_THEAD1,
           WA_THEAD LIKE LINE OF IT_THEAD.
    IMPORT WA_THEAD FROM MEMORY ID 'ABCD'.
    select SINGLE * from STXL into wa_stxl
                     where tdname = '00006000156500000002'.
    SELECT SINGLE * from STXL into wa_stxl
                      where tdname = WA_THEAD-TDNAME
                      AND TDID = WA_THEAD-TDID
                      AND TDOBJECT = WA_THEAD-TDOBJECT
                      AND TDSPRAS = WA_THEAD-TDSPRAS.
    IF SY-SUBRC NE 0.
    MESSAGE 'NO RECORD EXIST' TYPE 'E'.
    ENDIF.
    MOVE-CORRESPONDING WA_STXL TO G_HEAD.
    SET PF-STATUS 'STATUS'.
    SET TITLEBAR '001'.
      if g_editor is initial.
         CREATE OBJECT G_EDITOR_CONTAINER
           EXPORTING
            PARENT                      =
             CONTAINER_NAME              = CONT1
            STYLE                       =
            LIFETIME                    = lifetime_default
            REPID                       =
            DYNNR                       =
            NO_AUTODEF_PROGID_DYNNR     =
           EXCEPTIONS
            CNTL_ERROR                  = 1
            CNTL_SYSTEM_ERROR           = 2
            CREATE_ERROR                = 3
            LIFETIME_ERROR              = 4
            LIFETIME_DYNPRO_DYNPRO_LINK = 5
             others                      = 6.
         IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
         CREATE OBJECT G_EDITOR
           EXPORTING
            MAX_NUMBER_CHARS       =
            STYLE                  = 0
       WORDWRAP_MODE          = cl_gui_textedit=>wordwrap_at_fixed_position
    for to fix number of characters in row to 132 characers
             WORDWRAP_POSITION      = line_length
             WORDWRAP_TO_LINEBREAK_MODE = cl_gui_textedit=>true
    for the word to break to next line if it don’t fit in line
            FILEDROP_MODE          = DROPFILE_EVENT_OFF
             PARENT                 = G_EDITOR_CONTAINER
            LIFETIME               =
            NAME                   =
           EXCEPTIONS
            ERROR_CNTL_CREATE      = 1
            ERROR_CNTL_INIT        = 2
            ERROR_CNTL_LINK        = 3
            ERROR_DP_CREATE        = 4
            GUI_TYPE_NOT_SUPPORTED = 5
             others                 = 6  .
         IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
      REFRESH g_mytable.
         MOVE: WA_THEAD-TDNAME TO STXL-TDNAME,
               WA_THEAD-TDID TO STXL-TDID,
               WA_THEAD-TDOBJECT TO STXL-TDOBJECT,
               WA_THEAD-TDSPRAS TO STXL-TDSPRAS.
        CALL FUNCTION 'READ_TEXT'
        EXPORTING
        CLIENT                        = SY-MANDT
          ID                            = wa_stxl-tdid
          LANGUAGE                      = wa_stxl-tdspras
          NAME                          = wa_stxl-tdname
          OBJECT                        = wa_stxl-tdobject
        ARCHIVE_HANDLE                = 0
        LOCAL_CAT                     = ' '
      IMPORTING
        HEADER                        =
        TABLES
          LINES                         = it_line
      EXCEPTIONS
        ID                            = 1
        LANGUAGE                      = 2
        NAME                          = 3
        NOT_FOUND                     = 4
        OBJECT                        = 5
        REFERENCE_CHECK               = 6
        WRONG_ACCESS_TO_ARCHIVE       = 7
        OTHERS                        = 8
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    LOOP AT IT_LINE INTO V_RESULT.
       APPEND V_RESULT TO G_MYTABLE.
    ENDLOOP.
    CALL METHOD G_EDITOR->SET_TEXT_AS_R3TABLE
       EXPORTING
         TABLE           = G_MYTABLE
       EXCEPTIONS
         ERROR_DP        = 1
         ERROR_DP_CREATE = 2
         others          = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
       endif.
    ENDMODULE.                 " STATUS_9000  OUTPUT
    *&      Module  USER_COMMAND_9000  INPUT
    MODULE USER_COMMAND_9000 INPUT.
    CASE SY-UCOMM.
    REFRESH G_MYTABLE[].
    REFRESH IT_LINE[].
    CLEAR V_RESULT.
      WHEN 'SAVE'.
         CALL METHOD G_EDITOR->GET_TEXT_AS_R3TABLE
          EXPORTING
            ONLY_WHEN_MODIFIED     = FALSE
            IMPORTING
              TABLE                  = G_MYTABLE
            IS_MODIFIED            =
          EXCEPTIONS
            ERROR_DP               = 1
            ERROR_CNTL_CALL_METHOD = 2
            ERROR_DP_CREATE        = 3
            POTENTIAL_DATA_LOSS    = 4
            others                 = 5
         IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
    LOOP AT G_MYTABLE INTO V_RESULT.
       APPEND V_RESULT TO IT_LINE.
    ENDLOOP.
    CLEAR V_RESULT.
        CALL FUNCTION 'SAVE_TEXT'
          EXPORTING
            CLIENT                = SY-MANDT
            HEADER                = G_HEAD
            INSERT                = ' '
            SAVEMODE_DIRECT       = 'X'
          OWNER_SPECIFIED       = ' '
          LOCAL_CAT             = ' '
        IMPORTING
          FUNCTION              =
          NEWHEADER             =
          TABLES
            LINES                 = IT_LINE
        EXCEPTIONS
          ID                    = 1
          LANGUAGE              = 2
          NAME                  = 3
          OBJECT                = 4
          OTHERS                = 5
       IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
    REFRESH G_MYTABLE[].
    REFRESH IT_LINE[].
    CLEAR V_RESULT.
    WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
    LEAVE TO SCREEN '0'.
    *CALL SCREEN '0'.
    WHEN OTHERS.
    ENDCASE.
    *G_OK_CODE = SY-UCOMM.
    *CLEAR SY-UCOMM.
    ENDMODULE.                 " USER_COMMAND_9000  INPUT

  • Nokia 928 receives texts but won't display them

    2 weeks ago everything was great. I put phone on airplane mode for 2 weeks while offshore. Wi-fi only. Got back into port yesterday. I have great signal. I turned off airplane mode. I can make calls. BUT when I send or receive texts, they don't show up in a thread in my standard text messaging app that came with the phone. To be clear, if I choose a pre-existing text thread and send a text, the text vanishes instead of appearing in the thread. Then the intended recipient receives it normally. If someone sends me a text, if I am looking at my homepage (with the tiles/icons) I get my text notification and a banner appears at top of screen showing the first few words of the text, so I know I have received the text, but when I open the messenger, the text isn't there. This has been going on for 24 hours now. The only text I've received that have actually displayed in the messenger are the two I got from Verizon when I set up this account to ask this question.
    Any advice?

        Hey IDescribe!
    How bizarre. But, you need not worry any longer as we'll be sure to get those phantom texts back in your messaging bucket.
    Now, I'd like to thank you for the great details so we can already scratch off a couple of steps. The first thing I would do, since you just arrived back on land is to remove/reinsert the SIM card for at least 60 seconds so as to refresh your device with the network. When that is complete, please delete out all of your text message threads. And finally, to test, please send a text to yourself. Keep us in the loop on how this works.
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

    I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

    I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

  • Hi, unable to display full text on selection screen

    hi all
    please any one tell me how one can display full text on selection screen because whatevery i have defined in text for selection screen variable is not displaying full text, some letters are missing.
    for example :
    Poste(s) du document de facturation       
    above text i want to display on selection screen.
    but only  Poste(s) du document de factur
    is displying. some letters are missing
    please try to solve this
    thanking in advance

    Hi Raj,
    Check this..
    SELECTION-SCREEN COMMENT fmt name.
    Additions
    1. ... FOR TABLE dbtab
    2. ... FOR FIELD f
    3. ... MODIF ID mod
    4. ... ID id
    Effect
    Generates a comment on the selection screen. For the name name , there are two options:
    name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
    Note
    The field name is generated automatically and so cannot be defined with DATA .
    With comments, you must always specify a format fmt (see variant ULINE ).
    Note
    You must program a new line yourself via the format fmt .
    <b>Example
    SELECTION-SCREEN BEGIN OF LINE.
      SELECTION-SCREEN COMMENT 10(20) TEXT-001
                       FOR FIELD PARM.
      SELECTION-SCREEN POSITION POS_LOW.
      PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
    SELECTION-SCREEN END OF LINE.
    This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.</b>
    Regards,
    Raj

  • Is there a way to not display my name when I send text messages?

    Is my name even sent when I send text messages?  If so, is there a way to not display my name when I send text messages?  When sending a text message, I would like to only display my phone number.

    is it possible for the sender not to have my name in there contacts... and just typed my number?..
    It is possible for the recipent not to have your name for your number in their address book for your contact info, but the recipent must do that.
    So does that mean just my number will show when i send a text to the person using an android  phone?
    If the recipient does not have your name with your phone number in their address book for your contact info.
    Have you ever received a text from a phone number that is not in your address book? If so, what do you see? You should see the phone number only. The same applies for someone you are sending a text to.

  • Is there any possible to display the text in big font in screen painter

    HI all!
    i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

    HI
    CALL METHOD o_dyndoc_id->initialize_document
          EXPORTING
            background_color = cl_dd_area=>col_tree_level1.
        DATA : dl_text(255) TYPE c.  "Text
        CALL METHOD o_dyndoc_id->add_text
          EXPORTING
            text         = 'Flight Details'
            sap_style    = cl_dd_area=>heading
            sap_fontsize = cl_dd_area=>large
            sap_color    = cl_dd_area=>list_heading_int.
    * Display document
        CALL METHOD o_dyndoc_id->display_document
          EXPORTING
            reuse_control      = 'X'
            parent             = cont
          EXCEPTIONS
            html_display_error = 1.
        IF sy-subrc NE 0.
        ENDIF.
    by using these methods you can achieve i hope..
    have a good day.
    regards
    sarves

  • Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

    opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

    Graphics card is the problem.
    Trying to update drivers now.
    Thanks for your help
    john

  • How to Display key/text in default selection screen?

    HI Gururs,
    I want to display key/text in variable default selection screen in BI Analyzer in Quality.
    please give me any suggestions to resolve this.
    Thanks
    vadlamudi

    hi,
    What i have done is in the cube level, in the dimensions i have made specific properties and set to key/text in development, so its working fine in development of the analyzer, but still its showing text only in quality analyzer.
    please give me the solutions if you know any.
    regards
    vadlamudi

  • When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

    When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

    Rectory wrote:
    Please can someone tell me how  I can change this so when I send a mail from my phone and from the IPad that it reads from me.
    You need a separate email address but you've already ruled out that solution.

  • How to display korean text in file name

    Hi, I want to know how to make my system recognize and display Korean text in file names and such. My mp3 files are all a bunch of gibberish and they display that way in the itunes as well; the title, artist, and everything else.
    How can I fix this?

    Thanks. I tried that but the application wouldn't save any of the files for some reason.
    But it made me look for something else. In iTunes, I selected the song and right clicked, selected Convert ID3 Tags-->Reverse Unicode. Then it went to Chinese I think. I did the same thing again and it finally went to Korean.

Maybe you are looking for