No Name Server by Development Configuration import (nw2004s)

I want to import a development configuration in nwds 7.0 but there is no name server found. I have configured the name server in the dtr but i couldn't find the configuration in the sld. Thus the name prefixes aren't transfered to the nwds. How can i configure that?

Hi david,
Have you been able to resolve this problem?
Thanks,
Wael

Similar Messages

Development Configuration import Problem

Hi,
I have 2 development configurations for my project : one ; development and two ; maintanance. I did developments on development configuration and now I want to sync my maintanance configuration with the developments done in the development configuration. I need ot import the Maintanance configuration in NWDS. I am nor able to import it. The error displayed is
java.lang.IllegalArgumentException: Client VVD_ICICIMNT_D (1): absoluteLocalRoot (='C:\Documents and Settings\283818\.dtc\1\') is already used by another client.
VVD_ICICIMNT_D (1) is the maintanance development configuration I want to import in NWDS.
one strange thing : along with the name of the Configuration there is "1" written in bracket VVD_ICICIMNT_D (1) . wht is that for ?
Regards
Mrinalini Sharma

Hi Mrinalini,
If you are using the 2 NWDI Server in one NWDS. then please refer to below document.
1NWDS + 2 NWDI Server
But it didn't help me, I have checked with workaround for this, Create two folder namely 'development' and 'maintanance' in account under "Documents and Settings".
Suppose you are workiing in development configuration and want to work on maintanance configuration then you need pur .DTR and .DTC folder in development folder.
AND same if you want to work again in development configuration then you need to put .DTR and .DTC folder in maintanance folder and copy and paste .DTR and .DTC folder from development folder to your account/userid
Hope it will helps
Regards
Arun

Development Configuration import failed: class java.io.UTFDataFormatExc

Hello,
after importing the SAP ESS/MSS source I tried to import the development configuration as described in "JDI Cookbook for ESS Customers - Modification guide for ESS".
But when I confirm the selection: ESSTrack -> 1.0 -> ESSTrack_dev with the 'Next' button I get the error message:
Exception: class java.io.UTFDataFormatException Invalid byte 1 of 1-byte UTF8-sequence (0xfd).
NWDS: NW04, SP12, XP (german), j2re1.4.2_08
NWDI: NW04, SP12, Solaris 8, j2re1.4.2_07-b05
CMS and DTR seem to work properly.
Best regards
Thomas

Hi Helmut,
You are absolutely right!
There was an Umlaut in the track description (CMS Landscape Configuration). I replaced it and afterwards I was able to import the ESS development configuration.
Thanks a lot.
Best regards
Thomas

Development Configuration import failed

Hi,
In NWDS , when I try to import an existing development configuration, I get the following error message :
Exception: class java.ioUTFDataFormatException
invalid byte 1 of 1-byte UTF-8 sequence (0xfd)
Do you guys have an idea about this issue ?
Thank you in advance,
Best regards,
Arnaud
Edited by: Arnaud on Mar 25, 2008 2:59 PM
Edited by: Arnaud on Mar 25, 2008 5:38 PM

Hi Helmut,
You are absolutely right!
There was an Umlaut in the track description (CMS Landscape Configuration). I replaced it and afterwards I was able to import the ESS development configuration.
Thanks a lot.
Best regards
Thomas

NWDS -- Development configuration import

Hi,
NWDS --> Development Infrastucture --> New --> Dev Configuration --> import from SLD
I am getting an ERROR while importing the Development Configuration.
Error message:
Error during XML communication Exc=com.sap.cms.client.connector.CMSConnectorException: Unable to open connection to host ales:50,000 [The IP address of the host could not be resolved. Maybe the URL is misspelled or the host does no longer exist] [Error: com.sap.cms.client.ideAPI.CmsConfiguration Thread[ModalContext,6,main]]

what's the ip of host ales?
please put it in your host file.

Problem with SCs that created before the Name Server was configured

Hello,
I have created an SC and developed it.
When I created it, the Name Server wasn't configured and because of that, when I created new DC for this SC I needed to write the vendor manually. Lets assume I wrote example.org.
Sometime after I did configured the Name Server and I reserved example.org as a namespace prefix.
When I create new SC and new DCs in it everything is OK: Instead of writing example.org as my vendor I can choose from a combo box between sap.com and my own which is example.org.
The problem arises with the SC that has been developed before the Name server was configured: If I create new DC for it the vendor is shaded with sap.com inside with no option to change it, even though the previous DCs for this SC were created under the vendor example.org (which I entered manually).
I assume I can (with a lot of manual work) create new SC and move the DCs (or only their code) to the newly created SC, where I have the option to choose, but I am looking for more simpler solution. For example, changing a certain configuration file at the SC or so.
Anyone has an idea?
Thank you in advance,
Roy

Anyone...?

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

How to configure trex name server

hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganesh

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

Unable to connect siebel gateway name server during configuration enterprise server

Hi,
when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
I perform the following steps:
1) Configuration Gateway Server Name
     Entered port TCP/IP = 2320
     Enable automaticaly start server gateway name server
     Show pop up "Configuration siebel succesful"
2) Configuration Enterprise Server
     Entered name account authentication gateway server name = SADMIN
     Entered passoword account authentication gateway server name = SADMIN
     Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
     Entered port TCP/IP gateway server name = 2320
     show pop up error : "Unable to connect gatawey server name"
I can not find the log file in order to understand the issue.
When I try to connect to the gateway from the browser with the url
vdimtnsiebel01:2320 I get this screen mode:
???@??????? ?????????? ????????QÈ ??? ??????????? ??? ??? ? ?h????
and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
474554202F66617669636F6E2E69636F
20485454502F312E310D0A486F73743A
207664696D746E73696562656C30313A
323332300D0A557365722D4167656E74
3A204D6F7A696C6C612F352E30202857
696E646F7773204E5420362E313B2057
4F5736343B2072763A32312E30292047
65636B6F2F3230313030313031204669

Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju

After setup name server from SLD name prefix is still unavailable from nwds

Hi there
Although the nameserver is setup from the SLd, our developper team has told me that it does not work.
One of them has showed me from nwds, and I do not know how to fix it.
The name list is still unavailable from nwds while New Development Component creation:
Does anyone have any idea ?
Thanks,

Hi,
yes, there you should see the nameserver.
Proceed this way: Go to CMS webui -- Landscape Configurator -- Track Data -- select the track in question from the left hand side table -- RE-SAVE the track (Change and Save).
This action will update the server side development configuration.
Once the track is resaved, doublecheck the changes in the devconfig XML you can access on the Track Data -- tab Build Variants -- Display Development Configuration. An XML file will be opened where you should have an entry for nameserver. It'll look like
name-server-url="http://<your host:your port>/sld/cimom"
If it is correct, then open your NWDS and remove and re-import the development configuration.
Or try to trigger "Update" on it as you can see in the blog I sent you, but if that does not work then remove and reimport.
Check again the settings you have showed me recently on the screenshot, this time the "Name Server" on the Component Properties should not be empty any more.
I hope this helps. Let me know the results.
Thank you and Regards,
Ervin

How to delete Development Configuration entries

I have used document "How To... Setup CM Services" to configure NWDI with CTS+ for a Portal environment.
My STMS configuration in the CTS+ server looks like this:
EPU -> EPD -> EPQ -> EPP
EPU = Upload System
EPD = Development
EPQ = Quality
EPP = Production
Everything was going ok but by mistake I created the upload system in the CTS+ environment with the option "Create development configuration" and this generated an entry in the Development Configuration of the NWDI which I am not able to erase because the delete option is not active. I have tried to fix it by deleting the system EPU in the STMS of my CTS+ server but even though I no longer see the system in STMS I still see it in the NWDI.
How can I delete Development Configuration entries? Any help will be appreciated.
Regards,
Ayax
Edited by: Ayax Morales S?chez on Sep 8, 2010 12:28 AM

Hi,
For the sake of completeness;
Solution: Direct call to Web Service using the Web Service Navigator:
1) Call http(s)://<host>:<port>/wsnavigator
2) Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
3) Click on u201CNextu201D, then u201CdeleteDISystemu201D
4) Click on u201CNextu201D, then remove all u201CSkipu201D ticks, set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
5) Click on u201CNextu201D. The development configuration should now be gone.
Thanks
Kenny

C028:unable to connect to siebel gateway name server

Hi Siebel Guru,
I am facing issue with C028:unable to connect to siebel gateway name server when i configuring a new enterprise for gateway name server.
please help me out to sole this issue ASAP.
Regards
Prabhat

HI
I configured my gateway server with default port 2320.
and my gateway server up and running mode.
my port also listening.
netstat -na | grep 2320
tcp 0 0 0.0.0.0:2320 0.0.0.0:* LIST EN
-bash-3.1$ list_ns
started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no
-bash-3.1$ start_ns
service is already running
started at Thu May 21 01:00:39 2009, pid: 5834, autostart: no

Name server not updated in development configuration after change of SLD

Hi Guys
Hope you can help me with this one.
We have moved our SLD from one server to another.
After this we changed the name server in NWDI and in NWDS.
In NWDS i removed the development configuration and reimported it, but when I do this, a popup box shows the details of the development configuration and the name server is still the old SLD server. This means that when I start the NWDS I get an error saying that the name server host is unreachable.
Where do I change this?
I found out that the name server is setup in the .confdef file under .dtc\0 in the field called name-server-url. If I change this manually in the file, it works. But if I remove the development configuration and reimport it again, I am taken back to the old name server again.
It seems as if something has to be changed in NWDI, but I can't figure out what.
Can anybody help?
Cheers,
Jacob Vennervald

Hi Jacob,
I would proceed as follows: 
- login to your new SLD 
- go to the technical systems in the landscape area of the SLD 
- in the filter drop down select AS JAVA 
- check if your NWDI has reported to this SLD in the last 12 or 24 hours, you can check this on the "last update" column 
- if your system has reported to this sld the last few hours this is good if not go to the step "change J2ee to new sld" i will descirbe later. 
- remember the name of the system here. it is like sid on dbhostname. 
- got to sld administration (link on top) choose content maintenace in administration 
- in the subset filter select "All with instances" as class set SAP AS JAVA Cluster 
- you should find your system there. click on it. 
- in the new screen find a link in the middle top <nr> associated instances -> click it 
- in the next screen you will see the relationship of the technical system to the rest of the sld data. 
- there should be a topic called "hosted application server" 
- the should be an entry like: system landscape directory: sld on sid on server -> click it 
- here you will see the data for this hosted system. You can find the cim/url definig the SLD you will find the roles. Landscape and name server should assigend and so on here you can chage the SLD url. 
You can although proceed as follows. This as well requieres you nwdi to report and use this sld in j2ee see below if not. 
- on sld startscreen choose landscapes in the landscapes part of sld 
- select landscape type nwdi systems 
- if there is no landscape you can create one 
- in the landscape ypu can assinge systems. The sld should be availabel to choose. 
- once in the landscape you can view the system and you can change the CIM Server url and the roles there aswell its just another view on the content. 
 
you can although check: 
- open name reservation from develpoment part of start screen 
- here you should find a button about enabling or disabling the sld for nwdi usege. this should be of course enabled... 
 
"change J2ee to new sld" Ok and here what to do or to check if you are not sure if your NWDI uses/reports to the new sld. 
- Go to the nwdi server an open Visual admin i asume you are running a 7.0 Di if not let me knoe i can although tell you for CE. 
- ok in VA. select on of your server nodes->services->SLD data supplier. 
- an overview page will show up. 
- select the http settings tab in the lower middle. 
- https settings will tell the j2ee where to report to. Verify the data and change if needed. use the lightinigbolt button on top to transfer data to the sld. have a little patiance if your data is not shown immediately in your sld,. it may take 1-2 minutes until it is shown in the gui. 
- switch to cim client generation tab. those paraemters will tell your j2ee from what sld to read data from. It is important to understand that you may report to one sld but to read from antioher. depending on your sld landscape. The CIm CLient should use the same Sld as your NWDI uses in CMS setting. 
- if all is setup. do a cim client test. 
 
Allright. This is all I know on how the NWDI is integrated in SLD. Hope you can resolve your problem wiht this steps.
 
Have a good time 
Jan

Getting an error while importing Development Configuration file (NW 2.0)

i,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
But i can ping to the server and tr is also working .
i could see Active and Inactive Objects
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

Getting an error while importing Development Configuration file

Hi,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

No Name Server by Development Configuration import (nw2004s)

Similar Messages

Maybe you are looking for