"No network connection" on Mac OSX Freedome client when entering the code

Hi, Freedome Mac OSX lost the subscription information on version upgrade from the Beta version to the full version on last night. When I tryi to re-register using my existing code the application just shows "No network connection"-dialog and exits. What to try next? The Beta version client did not have any issues and now I'm not able to use my subscription. Regs,Harri

Hello Harri99,
In order to make sure all traces of the Beta version are gone, please proceed to uninstall as follows:
-Remove Freedome from /Applications.
- Delete the folders "/Library/Application Support/F-Secure/FSFreedome" and "~/Library/Application Support/F-Secure/FSFreedome"
-Remove "Your F-Secure Freedome Key" from your login keychain (it's in Passwords category).
-Reinstall the latest version available here.

Similar Messages

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

I factory reset my Mac Book Pro and when entering the Upgrade SN of LR5 it says it's Invalid. Any suggestions? Thanks.

I factory reset my Mac Book Pro and when entering the Upgrade SN of LR5 it says it's Invalid. Any suggestions? Thanks.

It will be necessary for you to install Lightroom from an upgrade installer. An upgrade requires the original serial number from the version that you first purchased, as well as the serial number for the upgrade. The upgrade serial number, by itself, will not work.

Universal Mac OSX Instant Client WHEN?!?!

Can't do all kinds of great wonderful things on my new MacBook Pro because the current G4 libraries in Instant Client won't link with Universal libraries. This means that I'm forced to ssh into a Linux box to do my work. It defeats the purpose of the having this wonderful laptop.
So when can we get Universal versions of Instant Client?

Hello Harri99,
In order to make sure all traces of the Beta version are gone, please proceed to uninstall as follows:
-Remove Freedome from /Applications.
- Delete the folders "/Library/Application Support/F-Secure/FSFreedome" and "~/Library/Application Support/F-Secure/FSFreedome"
-Remove "Your F-Secure Freedome Key" from your login keychain (it's in Passwords category).
-Reinstall the latest version available here.

Error 751011 - Mac OSX anyconnect client

Hi all,
I'm running into the following error when I use a Mac OSX anyconnect client when I try to connect. Our Windows 7 anyconnect clients login just fine.
3
Oct 25 2013
16:19:54
751011
Local:x.x.x.x:4500 Remote:y.y.y.y:34573 Username:Unknown Failed user authentication. Error: General Failure
%ASA-3-751011: Local: localIP:port Remote:remoteIP:port Username:
username/group Failed user authentication. Error: error
A failure occured during user authentication within EAP for an IKE        version 2 remote access connection.
• localIP:port—The local IP address and        port number
• remoteIP:port—The remote IP address        and port number
• username/group—The username or group        associated with this connection attempt
• error—The error string that indicates        the specific error
Any ideas of what could be causing this? We are using certifcate and LDAP for AAA.
Thanks in Advance.
Bill

Hi Harry,
I have resolved the issue. I didn't realize that I had to have the Mac Anyconnect pkg file copied to the flash of the ASA. Once I did that the authentication issue went away.
Bill

How do I install Mac OSX Lion client on the new Mac Mini Server?

If Apple would have had the quad-core processor option for the non-server Mac Mini, I would have just bought that, but I wanted the quad-core. I do not, however, need the server software. I found this article talking about how to disable the server functionality, but this article highlights how little that method actually does.
Ultimately, I just want to do a clean reinstall like I used to do prior to Lion. This process used to be so easy. Create a disk image of the desired operating system on USB, option boot, and you're done. Now it appears that Apple purposely impedes this process, as every time I boot from the USB I created with Mac OSX Lion client, I get a circle with a line through it. Is there any way around this restriction? Editing firmware, editing .plist files, etc?
Very disappointed that Apple is limiting what used to be such a simple process on Hardware and Software that I paid for but now can't get the functionality I want.

Sorry to be the bearer of bad news, but what I don't think you can do what you're asking for. Closest thing is going to be disabling the server components like it says in the article, but again, that doesn't do much.

Big issues with the new MAC OSx RDP client; crashes with Excel formattings or open Libre Office

We found out, that the new version of the MAC OSx RDP client (Version 8.0.24255) has some big problems: example: formatting an Excel column: text
blue: the RDP crashes (re-producible); opening libre office calc (with 3 RDP-sessions open): RDP crashes and is not able to be opened, until libre office is closed in another windows-rdp-session.

Crashreporter:
Process:         Microsoft Remote Desktop [56434]
Path:            /Applications/Microsoft Remote Desktop.app/Contents/MacOS/Microsoft Remote Desktop
Identifier:      com.microsoft.rdc.mac
Version:         8.0.24308 (8.0.24308)
App Item ID:     715768417
App External ID: 224042646
Code Type:       X86-64 (Native)
Parent Process: launchd [331]
Date/Time:       2014-04-10 16:21:58.896 +1000
OS Version:      Mac OS X Server 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          11 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 7 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      1FCED11E-54A0-400D-8433-DE8DDFD05728
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0xfffffffffffffffc
Crashed Thread: 8
Thread 8 Crashed:
0   com.microsoft.rdc.mac            0x0000000172f937dd void HLW::bltImpl::bltWordImplDR<unsigned int>(unsigned char, unsigned char const*, int, HLW::Point const&, unsigned char*, int,
HLW::Rectangle const&, unsigned char const*, int, unsigned int, unsigned int, int, int, unsigned int) + 6365
1   com.microsoft.rdc.mac            0x0000000172f99827 void HLW::bltImpl::bltWordImpl<unsigned int>(unsigned char, unsigned char const*, int, HLW::Point const&, unsigned char*, int,
HLW::Rectangle const&, unsigned char const*, int, unsigned int, unsigned int, int, int, unsigned int) + 167
2   com.microsoft.rdc.mac            0x0000000172f7a305 HLW::Blt::blt(unsigned char, unsigned char const*, int, HLW::Point const&, unsigned char*, int, HLW::Rectangle const&, unsigned
char const*, unsigned int, unsigned int, unsigned int, int, int, unsigned int) + 2101
3   com.microsoft.rdc.mac            0x0000000172f9c021 HLW::SoftwareRenderer::drawBlit(unsigned char, HLW::IBuffer*, HLW::Point const&, HLW::Rectangle const&, HLW::IBuffer*, HLW::Point
const&) + 1345
4   com.microsoft.rdc.mac            0x0000000172fc8cee HLW::Rdp::RenderManager::PatBltOrderImpl::threadedHandle() + 2060
5   com.microsoft.rdc.mac            0x0000000172fc8f0d non-virtual thunk to HLW::Rdp::RenderManager::PatBltOrderImpl::threadedHandle() + 29
6   com.microsoft.rdc.mac            0x0000000172fcd504 HLW::Rdp::RenderManager::OrderHandlingThread::run() + 114
7   com.microsoft.rdc.mac            0x0000000172be6ead Gryps::Thread::threadFunc(void*) + 103
8   libSystem.B.dylib                0x00007fff876edfd6 _pthread_start + 331
9   libSystem.B.dylib                0x00007fff876ede89 thread_start + 13

Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?

Has anyone tried REAL VNC client for Mac OSX? Is it worth the money?

you should not be getting that many crashes and unlike others here i don't see any strong reason to go to 7.2 other than to get to 7.2.1. i very strongly suspect you have dodgy AU's (probably around 218 of them) and if you have a look at your crash log it should show you why you are crashing. if you see an AU in the crash log it is telling you it is causing headaches. my guess is that upgrading is not going to solve your problems.
just so you know, if everything is running as it should be logic will hardly ever crash. post up the crashed thread from your crash log next time it happens. also make sure that you have the proapp kit latest version.
i know its deeply frustrating when things are going pear shaped. everyone but everyone feels that the stupid thing should just work and gets the over-whelming feeling that apple is supposed to make products that just work, that we paid good money for that level reliability and if it's going to act like this we might just as well have stayed with cheaper PC's. reality is, once you start throwing thrid party's into the mix it is really hard to keep control of reliabillity. if you took logic back to zero 3rd party plugs and in built audio, it would take fanatical fundamentalist to crash the thing. (having said that - i reckon i could)

I installed the latest version of iTunes on my Windows XP. I can launch it but it won't connect to the store because it says I don't have a network connection but I do because I'm on the internet right now! Help!

I installed the latest version of iTunes on my Windows XP. I can launch it but it won't connect to the store because it says I don't have a network connection but I do because I'm on the internet right now! Help!

The requirement shoul be on the box the iphone came in. they are also on the website
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)"

Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all

I upgraded to the lastest version of Flash to fix what I thought was a problem in Firefox. That problem turned out to be something else but now Safari will not play ANY flash content. I have uninstalled and reinstalled several times. I have even installed an older version. All of these have the exact same result. Flash works in Firefox but not in Safari. I have cleared the cache. I have gone into the flash securty settings and deleted all content. Nothing seems to change this. Anyone have any ideas?

Plug-Ins are installedand keep in mindthis problem affects all 3 browsers i am using IE9, Safari5 & Firefox 19NOT a SPECIFIC browser issuewhich is why i think it's either "Flash" (Adobe) or streaming web-site (Freedocast) issue.
Date: Mon, 1 Apr 2013 01:25:24 -0700
From: [email protected]
To: [email protected]
Subject: Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all
    Re: Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all
    created by Sunil_Bhaskaran in Installing Flash Player - View the full discussion
Have you enabled plug-ins in Safari?Could you please go through the last question of Mac section in the following URL: http://helpx.adobe.com/flash-player/kb/flash-player-faq.html#main-pars text1 Thanks,Sunil
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5195274#5195274
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5195274#5195274
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5195274#5195274. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

What are you getting on the TV? Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'? Or are you seeing the spiral galaxy desktop? If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?

HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

"No network connection" on Mac OSX Freedome client when entering the code

Similar Messages

Maybe you are looking for