No networked devices / assets in ZAM

Hi all
seeing this request again and again to manage non networked assets e.g. beamers, usb-disks, mobile devices etc.
anyone aware if something like this really comes with ZAM?
and YES already made a enhancement request ;-)
cheers
whenz

Whenz,
and what does the status of your enhancement request say?
Shaun Pond

Similar Messages

Network Device Gotcha

I made a discovery this morning and I thought I'd share in case anyone else runs into this.
We made a network device in FCSvr called MacStore3. This was an archive device that pointed to an AFP share called MacStore3 that was on afp://macstorage.local/MacStore3. However, someone who helped us with FCSvr setup told us that when you create network devices in FCSvr, you shouldn't put the server info in the device pane. You should treat it as a locally mounted drive. So instead of putting "afp://macstorage.local/MacStore3/" in the server URL, we were instructed to put it in as a local path with the location of /Volumes/MacStore3.
It worked fine, but one day when the device became unavailable (maybe the server had to restart, or was down for a while) and I tried to archive an asset to the MacStore3 device, I happened to notice that the file didn't make it to the MacStore3 device. I scratched my head and wondered where the file could have gone. I was able to restore the asset with no problems... but where had it archived TO?
Answer - if you have a device that is a network share in actuality (afp://macstorage.local/MacStore3) and you mount that share on the FCSvr machine and assign a FCSvr location to it as a local drive (/Volumes/MacStore3), you better darn well be sure that the FCSvr machine NEVER loses the network connection. If it does, and someone tries to assign an asset to that device or archive to it, FCSvr creates a new directory in the Volumes folder of the machine and puts the new archive or asset there. Then guess what happens when your network share is mounted again... Weirdness. The OS actually assigns a new mount point for it (In my case it was "/Volumes/MacStore3-1") but since my MacStore3 device in FCSvr pointed to /Volumes/MacStore3, nothing actually made it to the network drive, it went into the DIRECTORY that was created in the Volumes folder when the actual network share was offline.
BE CAREFUL with this.

I'm not sure why they told me that. However, I can see one reason one would deliberately want a network device to be referred to in FCSvr as a local device - when you're dealing with a Contentbase. Contentbases cannot be located on servers - FCSvr will only allow you to refer to a server as a local volume through /Volumes.
Before I made this discovery, I had made four devices as contentbases because they will contain a TON of movies and photographs (They will be libraries of client photos and videos for an asset management system). The media will live on an AFP-connected NAS. I wanted them to be contentbases so my users wouldn't have to worry about duplicate filenames. So I mounted the AFP share on the FCSvr machine's desktop and assigned the device location to /Volumes/Asset Management/Client. That works, but if the Asset Management share becomes unavailable, I have FCSvr putting an Asset Management folder in the Volumes folder, and everything gets screwed up.
I remade the devices as regular filesystems, and forgot about contentbase. I guess I have to just tell my users that they are going to have to be conscious of filenames.

A connection to the deployment share could not be made - Networking device did not have a driver installed

I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
Installing device pci\ven_8086&dev_1502 X:\WINDOWS\INF\net1ic64.inf succeeded
Spent 16903ms installing network drivers
QueryAdapterStatus: no adapters found
Spent 0ms confirming network initialization; status 0x80004005
WaitForNetworkToInitialize failed; ignoring error
Has anyone seen this before?
Orange County District Attorney

Hi,
According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Roger Lu
TechNet Community Support

HP Network Devices Support service will not start

Product: HP Photosmart Premium All-in-one (C309g)
OS: Vista Business 32 bit
Errors:
When running the "Add Device" portion of set up to add the printer to my PC so it can be accessed wirelessly this pops up in the back ground: "The specified service does not exist as an installed service."
The result of the above process is the following message in the HP installer screen: "The HP software that enables networking is not responding. Cancel the installation and restart the PC."
As you may guess, I've had this printer for a while couple/few years at least, and I've been running it wireleslly for quite some time.
The printer is active on my wireless network, printing Wireless Network Test Report from the printer proves this. I can also access the printer's webpage by entering its IP in a web browser.
We first perceived the issue when HP Solution Center reported that the Printer was no longer connected. And it suggested doing something with the install, which sent me down the road of unintalls and installs.
I've run the HP Print and Scan Doctor, which tells me the printer is installed for use via USB, but the networked instance is not installed.
I still have the orginal instal CD for this printer. Running setup off the root of the CD, i get the "Later Version already installed" or something to that extent. I've also downloaded the most recent Basic and Full Feature Instals from HP site.
I've used Revo Uninstaller to do my uninstalls and I've run CCleaner after all the apps are gone from the program list.
I've read somewhere that this is related to the "HP Network Devices Support" service.
In computer management I can see that its not running, and it is set to start "Automatically (Delayed Start)"
When I try to start this service I get this: "Windows could not start the HP Network Devices Support service on local computer Error 2: They system could not find the file specified"
Somethings that have been done on this machine recently, i'm not sure when the Printer problem started...
Installed Quicken 2013
Installed iTunes
Changed my home network from Public to private on this machine so I could set up some media servers.
I've check through all the quarantined files of my antivirus and there didn't seem to be any HP files in there.
I'm hoping my issue is in fact this service, and somehow replacing the missing file its refferencing will fix it all.
My next step is to uninstall everything again, and make sure that service drops out of the list too, then reinstall from HP download.
This question was solved.
View Solution.

I would suggest using the software scrubber built into the install to clean everything out. The steps below will walk you through it. Before doing step 10 from a CD or step 15 from a download, check the both program files folder to make sure that the HP folders get deleted.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers. For HP computers run the Uninstall_L3.bat
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
3. Once the download is done extracting, cancel the download.
4. Click the start menu.
5. Click Run.
6. Type %temp% in the run field
7. Look for, and open the folder starting with 7z (Example: 7zS2356)
8. Open folder Util
9. Open folder CCC
10. Run the uninstall_ L4.bat for non-HP computers. For HP computers run the Uninstall_L3.bat
11. When the uninstall has completed restart the computer
12. Run Disk cleanup from Accessories\ System Tools
13. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
14. Use this tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
15. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-73652-3&cc=us&dlc=en&lc=en&...
16. Run the download to reinstall the printer
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to stop ACS intergated AD users to login in AAA clients(network device)

I have ACS 4.2 Appliance which is integrated with Active directory.
AD users are able to login in network devices. Is there any so that I can stop AD user and other local users to login in AAA clinets (network devices).

These types of configurations are a two-way street. ACS must be configured to actually perform the authentication/authorization, and the AAA clients must also be configured for authentication/authorization. I would look at the AAA client configurations, first.
What kind of AAA clients are we talking about? Cisco switches, Cisco WLC's? Swicthing gear from other companies?
For Cisco switches, lines like the following will tell them to use your ACS server for administrative user auth (RADIUS ro TACACS+, respectively):
aaa group server radius rad_admin
server xxx.xxx.xxx.xxx
aaa group server tacacs+ tac_admin
server xxx.xxx.xxx.xxx
If your AAA client is a WLC, then you need to uncheck the "Management" box where the RADIUS server is defined for authentication (Security -> AAA -> RADIUS -> Auth).

ISE 1.2 network device editing

I have upgraded to ISE 1.2 and the latest patch and noticed a bug where editing network devices, you are unable to save changes as the "Save" button is greyed out. It also appears to have SNMP unchecked for all devices even though there is configuration for them.

Hi
Make sure that you have defined Security Group Access (SGA)-enabled devices in Cisco ISE to process requests from SGA-enabled devices that can be part of the Cisco SGA solution. Any device that supports the Security Group Access solution is an SGA-enabled device.
SGA devices do not use the IP address. Instead, you must define other settings so that SGA devices can communicate with Cisco ISE.
If you are importing network devices from previous release then You cannot import network devices in Cisco ISE, Release 1.2 that are exported in previous Cisco ISE, Releases 1.1 and 1.1.x as the import template for these releases are different.
You can import a list of device definitions into a Cisco ISE node using a comma-separated value (CSV) file. You must first update the imported template before you can import network devices into Cisco ISE. You cannot run an import of the same resource type at the same time. For example, you cannot concurrently import network devices from two different import files.

How to import network devices on ISE 1.2

Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Hi jiyoung
This import failed error might occur due to following reasons so please make sure that :
You are not running two import jobs of the same resource type at the same time. For example, you cannot concurrently run two import jobs to import network devices from two different import files.
More over please make sure that while configuring the network devices you are performing job from a super admin or network device admin group.
Best Regards:
Muhammad Munir
Hi, experts,
I'm trying to import network devices on ISE 1.2.0.899
so I downloaded the template and opened with notepad and wrote all the nessesarry information.
and I tried to upload to ISE, and it just said import failed. no reason..
does anyone know how to do it ?

Connect Apple TV to networked devices

I have a science lab with (2) Visio LCD TVs, an NEC projector, a SMART board, and a Dell computer w/ Windows 7. All of these devices are connected by HDMI cables and/or VGA cables.
Can an Apple TV be connected to these networked devices so that the Apple TV will play on all devices selected?

The ATV is connected to a source via HDMI (i.e. LCD HDTV) and can utilize airplay/home-sharing to connect to your computer and other IOS devices.

Discovering Network Devices with SNMP not working

I have implemented SCOM 2012 SP1 CU5 on Server 2008 R2 with SQL 2008 R2 all installed on the same VM running side by side with SCOM 2007 R2 v 6.1.7221.0. I have almost fully decommissioned SCOM 2007 and all that remains on it is 2 network devices that
I cannot discover with SCOM 2012 using SNMP, no matter what I try. If I just use ICMP the discovery works. I have checked both the devices and SNMP is enabled and if I run this snmpwalk command on both devices I get a response;
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.XX -v:1 -c:"public" -os:.1.3.6.1.
2.1.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=NetMan 100 plus
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.5491.6
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=5 days, 1:58:58.04
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=SystemsEngineer
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=MARMUPS
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=0
Total: 7
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.1 -v:1 -c:"scom05" -os:.1.3.6.1.2.1
.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=SSG-140 version 6.3.0r2.0 (SN: 0
185112006000325, Firewall+VPN)
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.3224.1.52
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=359 days, 2:20:16.00
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=Network
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=XXXXXX
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=72
Total: 7
The first device is a Marms UPS which has had its firmware upgraded, which was discovered using SNMP in SCOM 2007 and the second device is a Juniper SSG-140 Firewall, again this is discovered using SNMP in SCOM 2007.
I believe that I have setup SNMP correctly on SCOM 2012 because I have 28 other networks devices discovered using SNMP using an explicit discovery, some of these being newer Marms UPS's, emerson air conditioners, netapp SAN etc.
I have added any and all accepted community names in the SNMP service properties on SCOM 2012 and enabled accept SNMP packets from any host.
Does anyone have any information that they could forward to me or point in the right direction to troubleshoot this issue for eg run some snmp get commands and capture / filter traffic with wireshark, what do I look for? Any other logs to check besides the
obvious ones? Any known issues with SCOM 2012 SP1 and SNMP, should I upgrade to R2? It just seems that some network devices get discovered with ease and others do not and I am running out of ideas. Thank you all in advance.

Patrick, thank you for your reply.
Yes the snmpwalk command is run from the new SCOM 2012 server which has the discovery rule on it.
I don't have any pending network devices, its blank.
Could there be an issue with my discovery rule? I have noticed that each time I make a change to, for eg, the access mode and change this from ICMP to ICMP/SNMP, save it, run it, it doesn't seem to update the said network devices access mode's in network
devices, it just stays on ICMP. Do I have to manually remove the network devices which have been discovered before making any changes to the discovery rule and running it which I have done? They don't seem to appear in network devices pending management either?

Network Device Usermode I/O Protocol and ConfigFree error

I have a Toshiba laptop and recently it has not started properly, displaying the following message: "Not found TOSHIBA Network Device Usermode I/O Protocol. Please reinstall ConfigFree. OK".
I am unable to use the laptop and it will not shut down without being forced (though once it did shut down and restarted OK, and then worked fine for three days We left it over Xmas and now it is doing it again). Can anyone let me know what this error message means and how I can deal with it (I know little about the workings of my laptop!).
We have Windows XP and are set up to a wireless broadband connection. I would be wonderfully happy if I could sort this as I have been forced to travel to work rather than work from home today because of it!!!!
Thank you in advance!

Hi
The message is clear.
> Please reinstall ConfigFree.
So why didnt you reinstall this utility???
If you didnt create the Tools & Utility CD you can download this utility from the Toshiba driver page.
Then remove the ConfigFree from the Add & remove programs, reboot the unit and install the ConfigFree again.

Home Hub 5 "Home Network - Devices" icons

Hi all,
I've been looking at the Home Network - Devices screen from the HH5 and wondered about the icons that it chooses. If you have a look at my network below, my SkyHD box seems to be identified as a games thingy and while my other half's iPhone 5 identifies as a smartphone, my iPhone 4S seems to identify as a tablet. I'm guessing that it doesn't make any difference at all, but I'm interested in how the HH5 is selecting the device icons.
Cheers,
Bill

How do you even get these icons! I'm still stuck with laptop icons. Anyone know?
Anyway, I think the way it chooses is through how it access the internet and what data it retrives. (e.g retrieving game data)
Maybe BT just keeps a database of which is which. But they may of made a mistake. Thats what I think.

EA6500 has numerous "network devices" with no MAC

I have noticed from time to time I get many (15-20) "network devices" in the Device List with no MAC address. I notice this mainly when managing Parental Controls. I go and clean up the Device List and days later they reappear.
Another interesting thing is that the computer I am writing this with (through the router) does not show up in the Device List and I have an IP address from the router.
I have the latest firmware 1.1.28.146856.
Does anyone else see this on their EA6500?

There are a lot of people who reported similar or related cases that you have right now. From what I have read, they reset their routers back to factory settings. There is one who got to a work around by adding all of his devices to the DHCP Reservation List and the router is working fine after that.

NAS dissapeared from Network Devices

Hi everyone
I have a Mac Retina Pro running OS X 10.9.4 (13E28). I recently bought a Synology NAS (DS214). I enabled the Mac file sharing Service on it and it worked fine for the first couple of weeks. But suddenly a couple of days ago it is no longer available in the network devices... There is no firewall enabled and it's on the same domestic LAN. And I can actually reach the NAS using the GUI on the browser. Everything is up, it is just not available anymore on my MAC. And just on this Mac.
Not sure if related at all, but this is consistent with a very annoying behaviour of the MAC against external drives in general... I already have 2 external disk (one WD and the other Seagate) drives that just stopped working on it. Nothing happens, and they are never displayed when the USB is connected after using them succesfully for a while. Though if I connect the same external drives in other personal computers (including similar Macs they come up just fine). This is something else I need to fix as well, but probably in a separate thread..
Still wondering if some kind of device info is screwed up and how can it be reset if appropriate.
Thanks
Joao

Cisco works , HPOV is the best in heard

Remove network device inventory from SCOM database

Hello Gurus
I have a quick question. I think one of the internal connectors in my SCOM environment has got deleted by mistake. As a result all the network devices that were being monitored previously has now disappeared. I believe because they were present in the database,
I can't discover them now. Is it possible somehow to list those network devices from the database, and then delete them, by using powershell and/or SQL.
Any help in this regard will be greatly appreciated.
Regards,

You can delete them by:
In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
remove them.
Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
you can also check below link to remove/restore network device
http://technet.microsoft.com/en-us/library/hh212795.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

We are setting up Microsoft Windows Server 2008 R2 Failover Cluster on IBM X3850 X5 and get errors in the Failover cluster Validation Report due to the IBM USB Remote NDIS Network Device is using APIPA adresses and both servers are using same APIPA-adresse.
How should I configure the Server and OS for the Failover cluster to be MS approved?
IBM don't recommend that i disable the Network device, but it is a possible solution!?!

What I did was use ipconfig /all to see the settings it is using and then when and set the ip setting on the NDIS driver to be that except I increment the last value by 1 for each node so that they do not have the same IP address. I ran the
cluster validation again and it came up clean and I have not experienced any issues yet. It does give warnings about it being an Automatic Private IP Address and should not be used, which is ok because we are not going to use it anyways.
Rich Baumet

No networked devices / assets in ZAM

Similar Messages

Maybe you are looking for