No new characteristics combinations were loaded

Hi,
When I try to create CVC for Planning object structure from a Infocube i am getting message "No new characteristics combinations were loaded".
I checked the infocube, it contains data. I also cheked the datasource extraction in RSA3 transaction, it is also working fine.
What else we can check to resolve this issue.
thanks and regards
Mruugesan

Hi Venkanta,
I am facing the same problem. I have created the 8 characteristics, 5 navigational attributes in MPOS. The same characteristics along with sales history is available in my infocube.
I uploaded the data from a flat file. It was successful. And available in infocube too.
I am facing problem while uploading the data from infocube to planing area. I used /SAPAPO/TSCUBE to upload the data. It's showing below warning message
" 53 combinations of infocube are not contained in the BasisPlObStru"
and below that it's displaying all the CVCs.
Then I tried to create the CVCs with /SAPAPO/MC62. I tried to create CVCs from the infocube. Based on my selection criteria it's showing number of hits = 53. But while executing it's showing "No new CVCs where created". I deleted old CVCs then tried again. Still the same story.
Note: While uploading the flat file data to infocube I used date format as YYYYWW(in flat file) and converted to WW.YYYY while uploading.
Please suggest, I am stuck.
Pratyusa

Similar Messages

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

Install disk drive from old computer in an external enclosure.
Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

All my bookmarks, except those that were loaded on my iPad have disappeared and I can't add new ones

All my bookmarks, except those that were loaded on my iPad have disappeared and I can't add any new ones.

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

New computer has been loaded with old Itunes library but a number of earlier purchases say they are not "authorized" on this computer even though the bulk of my library works-- this is only about 5% of the total but were all purchased 9/18/2008 or before?

New computer has been loaded with old Itunes library but a number of purchases prior to 9/18/08 are not "authorized" when I try to play them.
They are all items I purchased from Itunes but they won't play any longer even though they show in my Itunes library.
Doesn't work when I enter account info and password either.
This is only about 5% of my library and many purchased items play no problem.
Any help would be appreciated.

Two words, Migration Assistant. It will transfer files between two Macs using a firewire cable automagically.
http://www.apple.com/pro/tips/migration.html
Three words, Target Disk Mode. Use a firewire cable to connect two Macs and then hold down the T key when you boot the Mac you want to transfer files from, G4 Tower. It will appear as a hard drive on the desktop of your Macbook Pro. Then you can just drag and drop the whole folder.
http://docs.info.apple.com/article.html?artnum=58583
Message was edited by: Jon Thornburg

Create Query with New Field combined with Existing InfoCube Data (BW 3.5)

Hi Everyone!
How would you recommend I handle the following situation?
I have a custom InfoCube (which I will call ZCUBE) that has been deployed to production. The business would like a new query that combines Current Standard Price along with data currently stored in ZCUBE.
Now, Current Standard Price is uniquely identified by the Material and Plant to which it is associated. These InfoObjects (Material and Plant) are characteristics of ZCUBE.
I am strugglig since the business will not allow any changes in the design of the InfoCube (i.e. add any new characteristics/key figures).
Is there a way to combine the two data sets? I attempted to use a Multi-Provider using ZCube and a custom ODS, but had no luck since the characteristics were so different. (ZCUBE has almost 50 characteristics defined)
I also have tried adding the attribute Standard Price to InfoObject Plant Material (0MAT_PLANT) but that was not helpful since 0MAT_PLANT is not included in ZCUBE.
From what I can tell I should create an InfoSet using ZCUBE and potentially a new ODS, but that isn't going to work since you can create InfoSets using InfoCubes in BW 3.5.
So... I am at a loss now. Any assistance would be appreciated!
Thanks-
Nathalie

Thank you very much for your responses!
I went ahead and created a custom ODS (Z_ODS) that contained the keys Material and Plant and had the data field Standard Price. I then created a Multi-Provider to sit on top of the custom cube and the custom ODS. Unfortunately, I am not getting the correct response since the Multi-Provider returns a union of the two infoproviders.
Z_ODS
0Material (key)
0Plant (key)
Standard Price
Z_Cube
0Material (char)
0Plant (char)
Char1 (char)
Char2 (char)
Char3 (char)
0FiscalYear
Key1....
MultiCube
0Material = 0Material
0Plant = 0Plant
Char1
0FiscalYear
Standard Price
Key 1
If I run a query just using Material and Plant in the return, the Standard Price and Key1 are returned correctly. If I include Fiscal Year in the query, the standard price is returned in a row associated to a blank Fiscal Year. See example below.
Query 1
Plant1   Material1   StandardPrice1   Key1
Plant2   Material2   StandardPrice2   Key2
Query 2
FiscalYear2009   Plant1   Material1   #(blank StandardPrice)   Key1
FiscalYear2009   Plant2   Material2   #(blank StandardPrice)   Key2
FiscalYear# (blank) Plant1   Material1   StandardPrice1 #(Blank Key1)
FiscalYear# (blank) Plant2   Material2   StandardPrice2 #(Blank Key2)
I know I should be using an InfoSet, but we are on BW 3.5... so I can't include a cube in an InfoSet.
I believe that the solution will be to add all relevant characteristics to the custom ODS... but that is going to be a much bigger challenge then originally expected. Please let me know if I am missing something... a silver bullet would be much appreciated
Thanks everyone!
Nathalie

Adding new characteristics to cube with data

Hi Gurus,
i need to add some characteristics to a cube already in production, this cube is customized version of material stocks/movements cube (0ic_c03).
i am looking for a way to add the new characteristics without having to do reinitialisation (opening stock,...), i am thinking about a loopback process but how do i manage to get the new characteristics populated for the historical data?
Thank you.

Hi,
If you want to load historial data, you must take ECC down time and re-intialization is required.Becasue you are adding new object in Cube and for that you need to change the Update rules, then need to load historical data, so without down time and reinitialization it is not possible.
Check like below.
You have data in PSA, so try to delete data from Cube and then load from PSA. Because you may write code in Update rules on;y I think. So in that case, it may work.
Thanks
Reddy

CIF integration of characteristics that were deleted at APO

Hi Experts,
we had some characteristics in APO that were transfered from the ECC. But since it was no longer used they were deleted at the APO system. But now we need to use againd some of these characteristics, and when we try to integrate this characteristic they stopped at the APO inbond queue whith the message "master data missing for characteristic &&".
I checked the table TCL_ATINN_IDENT in APO and the characteristics that were deleted in the past are still there but with an internal number at the field ATINN_NEW.
Does anyone knows how can we proced with this issue?
Is there any report to clean this data in the table?
thanks in advance
Thiago Cyrillo

Ok, I"ll try to explain this issue.
1 - We had a class (type 300) with some characteristics in ECC that were integrated with APO;
2 - When this class (type 300 and 400 in APO) and characteristcs were not used anymore in APO, they were deleted (classes and characteristics);
3 - But today we need to use these characteristic again.
4 - We have some classes (type 300) that is integrated with APO. These classes has the organizational Area M that is created in ECC and APO;
5 - Those characteristics that were deleted from APO, is now in attributed at the new classes that are integrated with APO;
6 - To Integrate those characteristic we put the organizational area M in them at the related classes;
7 - After that those characterist stop at the APO (inboud Queue SMQ2).
Let me know if you could replicate the issue
thanks and Best Regards
Thiago Cyrillo

Bapi to create characteristics combination?

Hi all!
Anyone knows if there is any bapi to create characteristics combinations?
If there is not, i guess i´ll have to use a 'call transaction' with the old-fashioned batch input method.
Thanks everybody for reading.
wlundgren

Not sure if this answer helps you. I am going through the same process of identifying this and i found a way easier then using call transaction. Whey you use the transaction /SAPAPO/MC62 for the first time for a given master planning object structure it generates a program in the background. You can get the name of the program when you get the screen for creating the Charateristics combination ( looking up system status). You should be able to copy of this program and make the necessary modifications to suit your needs. THis is a good process when the CVC's are to be created interactively and a few at a time.
Another alternative is to use the BW process and load the data into a cube and use the cube to create charateristics combination. You can link all this activities uing a process chain ( a BW functionality). We have used this process extensively and works well when you have to create multiple charateristics combination in one go. Let me know if this helps and if you need more details we can discuss.

New i mac cannot load pogo games

Have a new imac can not load pogo games

I unpacked my new refurbished imac today (my first apple) and of course one of the first sites I went to was Pogo. None of the games I tried would load; they would say they were loading then poof. I googled to try to fix it and nothing I found helped. One site said check your pop-up blocker. I did that and popups were blocked but after I unblocked them it still didn't work. Another site said to update your java. I did that; still no go. I ended up fiddling with the java and exiting Safari and going back on and finally it worked. I'm not sure what exactly did it either. All I can suggest is fiddle with your Java.
Not all the games work though, still can't use Word Whomp or Texas hold 'em.

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Cannot add a new characteristics from the system catalog

Hi,
I am trying to pull and add a new characteristics from the existing characteristics catalog. However when i save and activate the new char, the system throwing a yellow warning message as "Field KMKDGR has the same name as field KDGRP". When i proceed to save it since its just a warning message the system says all fields are saved. However when i quit and come to the characteristics list of the op concern, i notice the new characteristic is not added into the list of characteristics. Why is it so?
Is it because of the warning message?

Hi
The warning message can be ignored...
Once you save the char, you need to reactivate your data structure in KEA0... Ideally, when you save and press the back button, system itself gives a pop up message to reactivate the data structure...
1. Push the char from right to left
2. There will be a "match-stick" icon at the top left of the screen.. Click it
3. Then press back button
4. Whether with our without pop up message, activate your data structure in KEA0
Regards
Ajay M

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

Adding new characteristics and value fields in COPA

I have recently added several new characteristics and one new value field to the operating concern in the development system.
I am not exactly sure how to create the transport. This is the first time I have done a transport in COPA so I was hoping someone out there would have some tips on how this is done.
Also any helpful tips with transporting this type of change is much appreciated.
Thanks,
Laurie Hensiek

Refer to the documentation at http://help.sap.com/saphelp_46c/helpdata/en/c6/f22c7dd435d1118b3f0060b03ca329/frameset.htm
This is under the node Tools>production startup>transport.

Add new characteristics in the ReleaseStrategies to PO in the PRD system

Dear all ,
We need to create 2 new characteristics and add it to our Release strategies in production systems.
we have more or less 2500 opened POs.
Can I add directly in the Production system ?
Does anyone knows the impacts on the system if we do that directly in the PRD ?
Someone have a list of things to do prior this change and a list to do after this change ?
Impacts ?
best regards,
Ale

Hi,
Try the same in Quality server and check for few POs.
If a new characteristic is added to a CLASS eg. in ur case Pur group is added as a new characteristic to CLASS then Release strategy tab gets triggered only to those POs for which all conditions are met.
In ur case if olds POs purchasing group is different from the one mentioned in the values of Pur Group characteristic then u will not be able to release POs once u go to change mode to old POs since release strategy tab itself disappears.
Hope its clear
Regards,
Uzair

No new characteristics combinations were loaded

Similar Messages

Maybe you are looking for