No "New Folder" option under FILE. hard drive transfer ? too

I want to organize my albums into folders so the source list isn't so long. The iPhoto help area says to click on File>New Folder. I have no such option (shaded or otherwise). Then I attempted to make a new folder in Finder & drag it over. It drags, but then does not appear anywhere. Help?!? Where is my "new folder option"? IS there a chance I did soemthing to it in the past unknowingly. I didn't see New Folder as a short cut option either.
A little off topic, but if I save my harddrive to a second freestanding OWC harddrive thing, can I just transfer all of my data this way?

Lymbo,
Go ahead and create your new folder in finder (File>New Folder), then just leave it on your desktop.
In iPhoto, highlight the photos or Rolls you want to export, choose File>Export, and in the drop down menu choose File Export, select your Format, and click Export.
In the new Drop Down, called Export Photos, select Desktop from the "Where" menu, and click 'OK'.
Your highlighted photo(s) will be copied to your Desktop, and you can then drag them into your new folder.
Your origionals will still be in iPhoto; you can delete them if you want.
--Ap

Similar Messages

Can't create new folder on an external hard drive, and how to transfer files?

Hello everyone,
the non-English speaking videographer I translate for is having problems operating his Premiere CS5 for Mac from an external hard drive. He cannot create new folder on the external hard drive (the "New Folder" button is grayed-out when tries to export media onto the external hard drive) and when he simply tries to create new folder, the "new folder" option isn't available.
He suspects it's because the hard drive was formatted for PC.
Questions:
- should PC-formatting cause that problem?
- what's the proper way to transfer media files from PC-formatted external hard drive to the internal hard drive on Mac?
Would appreciate your advice.
Dimitri Vorontzov

He is right on the money
Now, for the sad or FAT part. You need to format the drive as FAT32 to make it work both on PC and MAC but, and that is a big BUT, the max file size of any given file will be 4GB. I haven't treid other formats yet, like the journaled MAC OS extended, but I don't think that would work. We transfer our files through or own gigabit network so I never had to try it, other than FAT32 formatted SDHC cards.

I want to create a new folder on my external hard drive for photos. Even though I added the new folder button to the tool bar it is not highlighted so I cannot click on it to create a new folder on this drive.

I have an external hard drive that I would like to pre-make a new folder before I import photos into it. Even though I added the new folder app to by toolbar, it is not highlighted and I cannot use it. It will only let me create new folders if I upload to iPhoto. That is not where I want to store everything. So I need to figure out how to turn on or activate New Folder on my toolbar for all possible downloading options.

If it's a drive that you've previously used with a PC, just double-check the format - click the drive once on the desktop to highlight it, and click cmd-i (the command key and the i key together) to see the Info window. That will tell you, under Format, how it's formatted.
If it's "NTFS", that's the current Windows format. You can read but not write to it with a Mac. If you want full read/write access, you should look into Paragon NTFS, which allows you to do both. Note that some features of te Mac (Time Machine, for example) will only work with Mac-formatted drives.
Matt

Got a new MBP and old external hard drive is too full for backup

I just got a new MBP and got all my data migrated and everything. I plugged my external hard drive in to run a backup, and it apparently is too full to run a backup of the new computer. Even though all the files are the same (mostly), I guess it's not going to overwrite anything because it's a new computer. Should I just get a new backup drive and start fresh for this computer. Should I reformat my old backup drive (and if so, how?)? Advice?

You should always have two backups of all vital data in any regard. A good 1TB Toshiba USB is $65
If there is NOTHING on the external HD you cant lose, format in disk utility > erase > format MAC OSX extended journaled.
then apply a Time Machine backup to the old HD of your new computer. That will free of a great deal of space.
However you should still have a 2nd backup of data. 2 backups is 1, and 1 is none.

Create New folder options is not coming in OBIEE 11G.

Hello Everyone,
I am testing Authorization part of the dashboard rite-now and issue is like I am not able to Create any New Folder within My Folder for Catalog.
I gave my self Read, Traverse Access to dashboard and Reports that are stored in Shared Folder, now I want to use Shared folder's Reports and want to create My Dashboard. but even I am not able to Create My Dashboard too because I can't save any reports in My Folder.
I checked with Manage Privileges options too, where I gave access to any Authenticated Users to create Personal Storage (My Folders and My Dashboard) , Create Folders , Save Customizations ..
if there any other change that i need to do???
Thanking you..

Hi Veer,
Yes, I just tested this thing out in 11.1.1.5. Please find more details below.
1. I create a sample 'BIConsumer' user.
2. Logged into the BI Server.
3. Navigated to Catalog and clicked on New
4. I could get only two options 'Report Job' and 'Action Intelligence'.
To provide proper privileges,
1. Logged into BI Server as BIAdministrator.
2. Navigated to Administration -> Manage Privileges -> Catalog/
3. Given explicit permissions to 'BIConsumer' to create folders and 'My folders and Dashboard'.
To verify,
1. Logged back to BI Server as 'BIConsumer' user.
2. Now, in the catalog could see 'New Folder' option under 'My folders'
For further analysis, can you please check which roles this particular user is having? You can click on username at the top right corner -> My Account->Roles and Catalog Groups.
Thank you,
Dhar

I am trying to move my iphoto and itunes to an external hard drive to free up space on my macbook...i have followed the steps to the change itunes media folder location (chosen external hard drive) but my new folder is greyed out so cant continue ?help?

I need to free up space on my macbook pro as hard drive is full!! So with 20 000 photos/video clips and itunes I would like to move this to a external hard drive!
I have followed steps on apple support but when i get to the Change itunes media folder location and chosen external hard drive it will not let me access the new folder option ?? help?

errrrrrrm!
Yes external drive shows up in finder on desk top and can change to in the media folder location thing!
My external hard drive is a WD Elements. I have no idea about permissions to the external? Do i Have to format external hard drive to a mac?
I am trying to follow the steps on the apple support page to transfer files (consolidate library etc) just cant get further down steps as the new folder option is greyed out!
Thanks for you help

I moved my Backups.backupdb folder to a larger hard drive and the transfer went fine with the space taken was correct but when i open my Backups.backupdb folder and browse there is actually no folders or files, the folder shows 280gig used but empty?

So i draged my time machine Backups.backupdb folder from my external hard drive to a larger external hard drive, the folder size was 280gig and took some time to transfer and once transfered i checked the size on the larger drive and the folder size was correct 280 gig. Job done i thought but the next day (stupidly after formating my oringinal drive) checked the Backups.backupdb i see that there is actually no folders or files in the Backups.backupdb??? when transfer the file it shows the 280 gig and names the files being tranfered but i just can't find them. Any clues how i can acces these files?
Thank you in advance for any help and let me know if any specifics are needed

That is not the proper way to do what you want. You need to use Disk Utility to clone the old backup drive to the new backup drive.
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the new backup drive. Source means the old backup drive.

Problems copying iTunes folder to an external hard drive - "The operation can't be completed because the item FILE NAME is in use"

Hi,
I have been trying to back up my iTunes folder from my MacBook hard drive over to a new LaCie external hard drive. However, whenever I try to do it at some point during the copying I keep getting the warning "The operation can’t be completed because the item FILE NAME is in use". Each time I have tried it, it is always a different file name that comes up and at different points of the copying. Following the warning, the copying stops and cannot be restarted.
I tried copying the iTunes folder to another Lacie external hard drive that I have, and it worked fine so I am guessing that it maybe something wrong with the hard drive.
I've been trying various approaches all day and can't seem to get anywhere with it - all very frustrating, so any help would be much appreciated!
Thanks.

If you don't have other backup data on it, reformatting external drive could solve the problem.

Transfering iTunes files to new computer using external USB hard drive

Thought this could be useful:
If you want to transfer your complete iTunes library to a new computer preserving all your playlists and library information, but without using your iPod as a hard dive, or without burning a CD or DVD, you can do it by using an USB external hard drive following these easy steps:
1) Quit iTunes
2) Connect your USB external hard drive to your computer and acccess it thru My PC or Windows Explorer.
3) Create two new folders in your external hard drive (you can name them LIBRARY Backup and PLAYLISTS Backup).
4) Open the LIBRARY Backup folder.
5) Open another Windows Explorer or My PC window; open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
6) Copy all of its contents (only the contents, not the whole folder) to the LIBRARY Backup folder you created in your external USB Hard Drive.
7) Close both the LIBRARY Backup folder from your USB external hard drive and the iTunes Music folder.
8) Open the PLAYLISTS Backup folder from your USB external hard drive
9) From your iTunes folder, copy the iTunes Music Library.xml to the PLAYLISTS Backup folder.
10) Close all the windows and extract your USB external hard drive from your PC ()
11) Install iTunes in your new computer.
12) Using Windows Explorer open the iTunes Music folder (usually located in C:\Documents and Settings\Owner\My documents\My music\iTunes).
13) Connect the USB hard drive to your new computer and open it using another Windows Explorer window.
14) Open the LIBRARY Backup folder and copy all of its contents (only the contents, not the whole folder) to the iTunes Music folder in your new computer. After the copying is complete, close this folder.
15) Copy the PLAYLISTS Backup folder to you new computer’s desktop.
16) Close Windows Explorer and extract USB hard drive.
17) Open iTunes
18) From the File menu, choose Import. Navigate to the iTunes Music Library.xml file on the Desktop and click Choose. The imported playlist will show only songs located on the computer's hard disk or external media.
19) You can now delete the xml. file from your new computer’s desktop if you wish.
PC Windows XP Owner of 5th Generation iPod

Type "move itunes library" into the Google search bar.
Type "ipod touch not recognized by itunes" into the search bar at the top of this page by "Support"

Can I copy music iTunes Music Folder from my external Hard drive to new PC?

not sure if this is possible but I copied my folders (documents/music/itunes/itunes music folder) from my local hard drive from laptop to my external (for backing up purposes) and now i have a new computer. can i just simply copy/paste this folder to my new computer and open itunes and it will be there. i know it's probably too easy but was hoping someone could help me out???? thanks.

You can by dragging them from itunes to your external drive this will copy them to it. Then do the opposite for from you drive to the new computer. Just make sure if you don't intend to keep the drive connected to your new computer. That you put copies of the songs in a folder on it before putting them on itunes or you have problems playing your songs.

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image.

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image. When I try to import the folders manually something pops up that says it is incompatable. It is possible to retrieve everything that was lost?

"When I tried to reload those folders onto FCP nothing happened"
Brownale6 how can u reload folder in to FCP.
As you said folders are moved to external disk but have you checked it should be like this
For Event
external disk>Final Cut Events>your event folder.
For project
external disk>Final Cut Projects>your project folder.

How to show the Library folder in an external hard drive

Hi there,
I am trying to restore the Skype Chat History to my new computer.
My old hard drive crashed and had to be replaced. Unfortunately my back-up Time Machine file was corrupted due to fact that this is a VERY EASY thing to happen and hence I DO NOT recommend that anyone uses Time Machine through a wirelessly connected hard drive, such as a Time Capsule - a very bad design flaw!
Luckily I am able to access some of the files on the old hard driave that was removed from my laptop. However I can not find a Skype folder or the Application support folder under my user name. Because it is an external drive, I can not use the techniques that have been suggested in other posts (such as using Terminal to permanently show the Library folder or using the Option key).
Can you please help me!?

Open a Finder window and choose the external drive with the user folder in the Finder sidebar. Then, make sure you see your user folder in the Finder window, because you will need it.
Now, open Terminal (in /Applications/Utilities) and type:
chflags nohidden
After typing that, press the Space key and drag your user folder from the Finder window to your Terminal window, and after dragging it, now type after the dragged folder (without space):
/Library
In Terminal you should see:
chflags nohidden (yourdraggeduserfolder)/Library
Finally, press the Enter key and the Library folder will show up

ITunes Music Folder Missing on external hard drive after changing iTunes Media Folder Location from MacBook Hard Drive. Not deleted...just missing?

I store my iTunes media folder on my external hard drive and can no longer find it there. It seemed to becomd lost after I re-designated the default iTunes media location. I had downloaded some things from iTunes without my external hard drive plugged in and when they downloaded they downloaded to the default location on my Macbook Pro. In recognizing that, I wanted to move those files from the hard drive on my MacBook Pro to the external hard drive. When I re-selected the location as the external hard drive a copy process began. I cancelled the copy process fearing the small number of files from my Macbook Pro would over-write all of the files on my external hard drive so I quit the copy process. Now I do not see my "iTunes Music" folder on my external hard drive. I fear that I have somehow lost the path but I believe the content is still on my external hard drive although I no longer see the "iTunes Music" folder on my external hard drive. I know I didn't delete it, but it isn't there. Is there a way to make it re-appear? I would really appreciate any guideance anyone has.
Thank you.
Best,
Matt

When you change the location in preferences it tells iTunes to start, from this point on, storing new media files in the new location. It then presents you with the option to move any old files in their current locations to the new location. It doesn't move the library files which are not media files. Read the links below to understand how iTunes works because you are the one with the computer in front of you and are in the better position to understand how it stands as regards to iTunes files.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
Now, did you keep the whole library on the external drive, or did you keep just media? From your description of the situation it sounds as if you kept the whole library there and when the external was not attached it returned to default location on the internal drive. What you should have done then was plug in the external drive, hold down the option key, and guide iTunes to the library file on the external. At this stage you could have dealt with the mislocated new files on an individual basis.
I guess the key question is, did your trying to move the couple of new media files to the external drive overwrite the iTunes folder there, which because you then canceled may have also just resulted in it being deleted. I am not going to test the theory on my system.
How big was your library on the external? If it was 40GB do you now suddenly have 40 GB free?
Look for any iTunes folders on the external drive. In view options turn on "calculate all folders sizes" and see if there are any big ones.

UCM - WEBDAV - How to Disable the New Folder option in the action popup

I am trying to implement WebDav functionality. I don't want the users to create folders in the folder mapped to a security group. As long as the user has privilege to contribute to the security group he/she can checkin documents but they should not be able to create folder under it. I did not find documentation as to how to disable the new folder option in the context action menu that pops up on mouse right click. Is there any way we can do that?
Thanx.
Edited by: user10991492 on Nov 1, 2010 11:24 AM

This is the boilerplate text often used in connection to networks in general. It is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe:
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files.
Working across a network in general is not supported by Adobe.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

No "New Folder" option under FILE. hard drive transfer ? too

Similar Messages

Maybe you are looking for