No new objects transferred in infocube

hi,
while i was creating an InfoCube,i was not able to transfer info objects from template to structure.i got an error message"no new objects transferred".what might be the reason for getting such an error message?
can any one help me out of this?
thanks
kp

yes,
I got the same error today. The reason is that I adopted one IO which had no discription. I changed the IO by giving the discription. It works,  I could assign the IO from template to structure and activate the InfoCube.

Similar Messages

  • Adding new object to 0FIGL_V10

    Hello All,
    I installed the standard data flow for  Virtual Infocube 0FIGL_V10 and the report was ok (about monthly result). After that I added a new object to the data flow (0AC_LEDGER). But now I don't have the same result in the report.
    Do I need to modify the function RS_BCT_FIGL_DATA_GET_VC10?
    Thanks

    Hello Chandran,
    The new object (0AC_LEDGER)  in the Update Rule from Infosource to ODS is direct assignation and overwrite. From ODS to Infocube is the same direct assignation.
    Thanks
    Jose

  • How should i get the delta data for those new object's previous delta data?

    Hallo all,
    i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
    Jimmy

    Hi,
    After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
    Thanks,
    Shreya

  • Doubt in creation of a new object

    Hi All,
                 I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype
    of any existing object, then what should we enter in the Program field for creating the object?
    I hope I am clear with my question.
    Thanks in Advance,
    Saket.

    Hi Saket,
    Following will be required for created a custom business object.
    1. Object Type - ZTEST (Internal Techincal Key)
    2. Object Name - ZTESTNAME (Technical Key Name)
    3. Name - TEST (Name of BO, it is used while selecting the object type)
    4. Description - (Short Description of BO)
    5. Program - ZTESTPROGRAM (ABAP program in which the methods of the object type are implemented)
    6. Application - A or B.. etc (Area to which your BO is related)
    Please remember that you can learn these basic things by giving F1 help on those fields and in HELP.SAP.COM.
    Regards,
    Gautham Paspala

  • What is the diffrence between extends and creating new object?

    HI ALL,
    what is the diffrence between extends and creating new object?
    meaning
    class base{
    class derived extends base{
    class base{
    class derived {
    derived(){
    base var = new base();
    can u people tell me diffence from the above examples.
    THANKS.
    ANANDA

    When you create a new object you have to supply the class to which that
    object belongs. A class can extend from another class. If it does so
    explicitly you can define the 'parent' class from which the class extends.
    If you don't explicitly mention anything, the class will implicitly extend
    from the absolute base class named 'Object'.
    Your example is a bit convoluted: when you create a Derived object,
    its constructor creates another object, i.e. an object from the class from
    which the Derived class extends.
    Extending from a class and creating an object don't have much in common.
    kind regards,
    Jos

  • Creating a new object at runtime

    What I want to do is dynamically change the name of a object
    everytime I create a new one, what I mean excatly is like make it
    so that I can some how increment a value of a variable and apply it
    to an object anme... so I get something like this
    objectName0, objectName1, objectName2, objectName3 and so on.
    I basically want to make it so that I always have a new object to
    use... how would I go about doing this?

    You don't need exec, the api provides this functionality for you. Look at the java.util.jar package.

  • It will not parse! Creating a new object in the universe

    Hi, we have a universe and BO reports. They work fine for our clients. We are on BO XI r3.1. Now, one client captures an additional piece of info. They would like to report against this and add it high up on our drilling heirarchy. "Sure, no problem". For the following I was logged in as administrator.
    The additional data field is a 3 character code.
    1) We added an additional column to the actual database table.
    2) In Universe Designer, I refreshed universe structure and could see the additional column
    3) Created an object 'Acode' that refers to db.new_field
    4) Exported universe
    Maybe worth mentioning that I can see this object and use it in reports fine in Infoview.
    Now, I need to create a new object that will be one of 2 strings based on the 3 character code (Acode) i.e. the 'Atype' can be X or Y.
    Here's my code and it just will not parse:
    CASE
    WHEN @Select(AFolder\Acode) = 'CEL'
    THEN 'X'
    ELSE u2018Yu2019
    END
    Error I get is:
    Parse failed:Eception:DBD ODBC SQL Server driverStatement could not be prepared.State 42000
    I'd appreciate any help, believe me I have searched the forums!
    Thanks, Eddie

    Look at following SAP NOtes.
    1373739
    1184304
    Regards,
    Bashir Awan

  • HT4527 I got a new pc, transferred files, and lost about 2/3 of my library. Also all of my playlists. Have a lot on my iPod, but not all of it. Where did it go?

    I got a new pc, transferred files, and lost about 2/3 of my library. Also lost all playlists. I have a good amount on my iPod but can't transfer. What happened to my music?

    iDevices are not and have never been backup devices.
    Authorizing a computer does not cause media to magically appear.
    Media is only where the user puts it.
    Copy the ENTIRE iTunes folder from the old computer to the new computer.

  • Setting the name of a new object from a string

    Is there anyway I can set the object name of a newly created
    object from a string?
    eg.
    (the code below generates a compile time error on the
    variable declaration)
    public function addText(newTxt:String, txt:String,
    format:TextFormat):void {
    var
    this[newTxt]:TextField = new TextField();
    this[newTxt].autoSize = TextFieldAutoSize.LEFT;
    this[newTxt].background = true;
    this[newTxt].border = true;
    this[newTxt].defaultTextFormat = format;
    this[newTxt].text = txt;
    addChild(this[newTxt]);
    called using>
    addText("mytxt", "test text", format);
    I could then reference the object later on without using
    array notation using mytxt.border = false; for example
    There are many a time when I want to set the name of a new
    object from a string.
    In this example I have a function that adds a new text object
    to a sprite.
    The problem is, if I call the function more than once then
    two textfield objects will exist, both with the same name. (either
    that or the old one will be overwritten).
    I need a way of setting the name of the textfield object from
    a string.
    using
    var this[newTxt]:TextField = new TextField()
    does not work, If I take the "var" keyword away it thinks it
    a property of the class not an object.
    resulting in >
    ReferenceError: Error #1056: Cannot create property newTxt on
    Box.
    There must be a way somehow to declare a variable that has
    the name that it will take represented in a string.
    Any help would be most welcome
    Thanks

    Using:
    var this[newTxt]:TextField = new TextField()
    is the right approach.
    You can either incrment an instance variable so that the name
    is unique:
    newTxt = "MyName" + _globalCounter;
    var this[newTxt]:TextField = new TextField();
    globalCounter ++;
    Or store the references in an array:
    _globalArray.push(new TextField());
    Tracy

  • Getting ORA-20001: Creation of new object is not allowed: !!

    Hi Am getting ORA-20001: Creation of new object is not allowed while enabling constraints after importing the dumps from source to target datbase,can anyone assist me to fix this issue.

    Hi Osama/Mustafa,Thanks for your quick response,can you please explain me the following things-
    1)As i don't have privilege to run the DBA_XX views,am not able to run those queries-
    SELECT OWNER, TRIGGER_NAME, TRIGGER_BODY FROM DBA_TRIGGERS WHERE TRIGGER_TYPE IN ('AFTER EVENT', 'BEFORE EVETN') AND TRIGGERING_EVENT LIKE '%CREATE%';
    can you tell me what output it'll throw,based on this output how will we fix the issue.
    2)SELECT * FROM dba_sys_privs WHERE privilege = 'UNLIMITED TABLESPACE';
    why we need to check this privilege?as i don't have privilege to run this one in my db.
    3)select * from dba_source where upper(text) like upper('%Creation of new object is not allowed%');
    as i don't have privilege to run this one in my db,already i got the object name from my logfile
    and more you have quoted"This is an error of someone that coded purposely on your database, probably dba or a developer who has privilege and again it is in a database event trigger"
    4)can you explain me much more deeper about the root cause and as already sent note to my DBA,can you explain me the solution to fix this issue ?

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • Schema of a new Object Type: message pass the BIU without validation

    Hi,
    i've defined a new Object Type for send messages to Web Service. I've created the schema files and i've uploaded there in repository with the "Import" function of GUI. After, i've defined the XML file for the "Execute" function of the B1i GUI.
    After the load of files, in the repository the files are in correct position.
    In my BIU the definition of sender and receiver system type is correct, and also the definition of SenderMainObjectTypeID and ReceiverObjectTypeID. The message from B1 pass through the IPO chain without problems and the message is received by teh Web Service.
    If modify the file XSL into the BIU, a message with less elements than a schema pass without problem.
    If delete the schema from repository, the message pass without validation.
    I would know because the schema is bypassed...
    Thans

    Ok,
    solved with introduction of validation point in a customized IPO using a branch / unbranch atoms.
    Bye.

  • To add new object link in DMS

    Hi Sir/Madam,
    Currently we are implementing DMS(Document Management System) and
    our main requirement is to add document to the delivery and billing
    document.In t-code dc10 in "define object link" lips and vbrp object is
    not present in the default list so how we can add these new object in
    order to attach new document to delivery as well as billing document.
    Is it possible to attach document at header level because we have to
    attach lorry number at delivery header which will be common for all the
    items.
    The function module object_check_lips already exist in se37 but we
    have to create new function module for object vbrp.How to create this
    function module? How we have to create screens for these objects? If we
    have to create it by copying some function module like
    object_check_equithan what will be the funtion group.
    IN delivery document (vl03n) in menu bar in "extras" document
    option is not there than how we will see the attached document, do we
    have to create this option with help of abaper or this option will
    automatically reflect after all the cofiguration?
    Thanks and Regards
    Abhilash Nayak

    Hi Abhilash,
    You need to gofor z-development for this. The Abap'r will add the new required object in object link field. Also the DMS screen will appear in the required t-code.
    Meantime you need to add this object in SPRO , "maintain key fields".
    I hope this will resolve the query.
    Regards,
    Ravindra

  • New-object itextsharp causes an error

    Hi, i am trying to use powershell to read a pdf document with the following code
    [System.Reflection.Assembly]::LoadFrom(".\itextsharp.dll")
    $reader = New-Object iTextSharp.text.pdf.PdfReader -ArgumentList ".\201408_issue.pdf"
    for ($page = 1; $page -le $reader.NumberOfPages; $page++) {
    $lines = [char[]]$reader.GetPageContent($page) -join "" -split "`n"
    foreach ($line in $lines) {
    if ($line -match 'test')
    $matches[1]
    I get an error though, has anyone encoutnered this? Thanks
    New-Object : Exception calling ".ctor" with "1" argument(s): "Object reference not set to an instance
    of an object."
    At C:\PsScripts\test\PDFReader\PDFReader.ps1:2 char:11
    + $reader = New-Object iTextSharp.text.pdf.PdfReader -ArgumentList ".\201408_RIN_i ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvocationException
    + FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.PowerShell.Commands.NewObject
    Command

    PS C:\PsScripts\test\PDFReader> $error[0].Exception | Format-List * -Force
    ErrorRecord : Exception calling ".ctor" with "1" argument(s): "Object reference not
    set to an instance of an object."
    StackTrace : at System.Management.Automation.DotNetAdapter.AuxiliaryConstructorInvo
    ke(MethodInformation methodInformation, Object[] arguments, Object[]
    originalArguments)
    at
    System.Management.Automation.DotNetAdapter.ConstructorInvokeDotNet(Type
    type, ConstructorInfo[] constructors, Object[] arguments)
    at
    Microsoft.PowerShell.Commands.NewObjectCommand.CallConstructor(Type
    type, ConstructorInfo[] constructors, Object[] args)
    WasThrownFromThrowStatement : False
    Message : Exception calling ".ctor" with "1" argument(s): "Object reference not
    set to an instance of an object."
    Data : {}
    InnerException : System.NullReferenceException: Object reference not set to an instance
    of an object.
    at iTextSharp.text.pdf.PdfReader.ReadObjStm(PRStream stream,
    IntHashtable map)
    at iTextSharp.text.pdf.PdfReader.ReadDocObj()
    at iTextSharp.text.pdf.PdfReader.ReadPdf()
    TargetSite : System.Object AuxiliaryConstructorInvoke(System.Management.Automation.Met
    hodInformation, System.Object[], System.Object[])
    HelpLink :
    Source : System.Management.Automation
    HResult : -2146233087
    Any meaning to you?

  • Need the code to make these to new objects in BW world, please help...

    I have two fields that I get from the source (to DSO):
    CREATE_DATE (YYYYMMDD)
    REPORT_MONTH (YYYYMM)
    First I want to make a infoobjects (called CREATE_MONTH) that takes the YYYYMM from the CREATE_DATE.
    The I also want to make an indicator (called MONTH_IND) that have a test on infoobjects called CREATE_MONTH and REPORT_MONTH.
    The logic should be something like this:
    If CREATE_MONTH is 3 month earlier than REPORT_MONTH the indicator should say ‘over 2 month
    If CREATE_MONTH is 4 month earlier than REPORT_MONTH the indicator should say ‘over 3 month
    Etc….
    Conclution:
    Need two new objects:
    1. CREATE_MONTH
    2. MONTH_IND
    Can someone give me some help on how to do this Please?

    Hi Elaine!
    First of all I´d like to thank your answer.
    I know what you mean; I had a gif animated file in my web site and I converted it in a swf file, that is the reason why I couldn´t do the correct to make the link. I thought that I could make the link with a simple code but thanks to this foro, now I know that it is a bit more complicated.
    Anyway, I think that it is better if I read the tutorial to know how this work.
    Thank you again and have a nice day!
    afp5trip

Maybe you are looking for