No notification on the dashboard when purchase being made

Hi,
Recently I have linked up my shopping cart to an paypal account. After completing an transaction, I could be brought back to the website however I realised a few things.
http://screencast.com/t/zfNRthKIk0
First of all, this is what I get http://screencast.com/t/NkRmDQABQt6
Second there is no notification on the dashboard.
Can I know if there's any recent issue or problem affecting this?
Thanks

Check if 'Auto-Return' is on and pointing to the correct URL on PayPal's end. You can view this information here: http://kb.worldsecuresystems.com/833/cpsid_83331.html. I suggest also going over that article and ensure everything's set up correctly as it appears this is an issue specific to your site - PayPal's working fine on my site. If that doesn't help, may be best to contact support.

Similar Messages

  • HT1918 how to change the country of the store when purchasing an app?

    how to change the country of the store when purchasing an app?

    Try contacting iTunes Support and ask them to remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Send a notification to the proxy when he is removed as proxy

    We have a requirement to send a notification to the proxy when he is removed as proxy.
    There is one out of box notification to the proxy when assigned. But could not figure out an option to send a notification when proxy is removed.
    Is there a way?
    Thnx
    Sid
    Edited by: Sidharath on Jun 4, 2012 2:23 PM

    yes, there is a OOTB system property called XL.ProxyNotificationTemplate to tell user that he is a proxy. But as far as I know there is no notification to 'proxy removed' .
    1-You can create a system property and add SQL's into it. Please check this link I replied before: Re: Exception while setting security question
    2-You can create a trigger into database (proxy table=PXD) that start some procedures(including e-mail notification) if proxy user is removed.
    I hope this helps.
    Thiago Leoncio.

  • Does anyone know how enable notifications on the ipad when it is disabled?

    Does anyone know how to enable notifications on the ipad when it is disabled from typing in the passcode to many times?

    i have this question

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • One of my ipods is not syncing properly. System says sync is complete but the updates aren't being made. Can I correct this?

    One of my iPods is not syncing properly. The system says "sync complete". but it's obvious the updates are not being made.  Can I correct this?

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • Unnecessary Report refresh on the dashboard when changing the dashboard prompts

    Hello All
    I have two reports on a dashboard with two dashboard prompts for example Report 1) Year, State, Count; Filter: Year is prompted 2) Year, State, Count; FIlter: State is prompted. On the dashboard we have two reports Report1) and Report 2) with Year and State dashboard prompts.
    The issue is when you change year prompt both the reports gets refreshed even though nothing changes on report 2 but it still dissapears and appears as it is refreshing and  the same happens with report 1 when i change the state prompt it refreshes that report.
    Please letme know how i can limit the dashboard prompt to refresh only the report where it is prompted.
    Thanks
    Ravi

    are you talking about the database table caching? if so we are using OLAP cubes and I am not sure if caching is disabled. Is my issue related to caching? also another updated if I have just one dashboard prompt for example just year  only report 1 refreshes and the report 2 doesn't disappear. But when I add state dashboard prompt, which ever prompt I change state or year  both reports refreshes. The problem is when I add more than one prompt on the dashboard all the reports refreshes when the dashboard prompt selection changes. Any ideas.
    Thanks

  • How to find the date when entries were made in DEVACCESS table

    Hi All,
    I needed to know if there is a way to find the date when an a developer was registered in our SAP system.
    I can see in DEVACCESS table (in SE16) all users registered along with their developer key but i also need to see when those entries were  made. Can you please help in this.
    Regards,
    Ashish Robinson

    Hi all,
    Thanks for the replies but my issue is that I got only for some users from SCCR in service maketplace. It seems that that other users for which (i can see entries in table DEVACCESS in my system) were created with somne other s-user which we dont know at thsi time so finding from service marketplace is not working!
    I needed to know iff there is some way i could get this information (when entries went in table or when the users registered) from SAP itself.... or may be from oracle sql level.
    Thanks to suggest <removed by moderator>
    Regards,
    Ashish Robinson
    Edited by: Thomas Zloch on Nov 23, 2010 2:28 PM - priority normalised

  • My recently purchased IPad Air is not accepting it's own charger. It says the device is 'not certified'. Is there anything that I can do? It is the charger supplied with the iPad when purchased!

    I recently purchased an IPad Air and it has been working fine for around 5 months. All of a sudden it has stopped charging and when I plug the charger in it displays a message saying,'this device is not certified and may not work correctly' (or similar). To be clear the charger is the same one that was supplied at time of buying the product and has worked fine up until now. I am loathed to buy another one as I have taken it back to where I got it from and tried a new cable and this did not work. Can anyone offer any advise? Thanks.

    Ultimately if those things do not get it to work... the circuit board may be toast.
    I've been hearing lately that people are having the same issue with their iPhones, a friend's experience with apple tech support in the store resulted in that explanation, and he was told to buy a new phone since it was over a year old.
    good luck!

  • Why do the categories in the health app not show up in the dashboard when it is told too.

    Lately every time I attempt to put an item from HealthKit on My dashboard it will not show up. I go back to the selection list and click on it again and it is unmarked. It won't even allow Me to add a data point. Is anyone else having this or similar issues

    Hi dcbollinger3450,
    It sounds like you are trying to add your Medical ID card to your lock screen. You can find the information about how to achieve this in the following article:
    Use Health on your iPhone or iPod touch with iOS 8
    http://support.apple.com/kb/HT6357
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How can i change the face time number and the Imessage, when purchasing a new sim card

    i moved countries so i bought a new sim card, my phone is unlocked i bought it from apple store at square one which is located in Canada, toronto. the main issue im facing with my iphone is i can not change my facetime number and Imessage. any help please?

    i tried turning both off and leaving them off for a while but i did not work at all,
    And that included powering the iPhone off and on after doing so included with my question?
    If so, try removing your iPhone from being associated with your Apple ID per the instructions included with this link. I would turn iMessage and FaceTime off on your iPhone before doing so.
    http://support.apple.com/kb/HT4627
    After doing this, your new phone number should be registered with your Apple ID for iMessage and FaceTime when turning both back on with your iPhone.

  • My iphone 4s restarts itself and kills the battery when not being used, what is wrong?

    If I'm not using the phone it dies and then restarts by itself, then when I woke up this morning the battery had died and it needed charging, it was fully charged when I went to bed, I have restored it with and without backup and hard restarted it, the only time it seemed to behave was when it was restored as a new phone with absolutely nothing on it at all apart from what it comes with.

    restore the phone as new if it still does that then replace it

  • Why isn't "Find My iPad" automatically enabled on the device when purchased? Why is it a feature that is OFF and has to be turned ON instead of the other way around? I didn't know it needed to be enabled and now it's stolen and I can't locate it

    Why isn't the "Find My iPad", "Find My Mac", etc. feature not automatically enabled in the iCloud Settings on every device? My iPad was stolen a couple days ago and it's been showing Offline under "Find My iPhone" feature so I started doing some research. Come to find out "Find My iPad" has to be enabled under the PRIVACY button in SETTINGS. I never knew that!!! That feature is highly needed for Apple products so can some explain why it's not already enabled on every device and actually has to be turned ON from the OFF position and not the other way around? Now some lucky person has stolen my iPad and I can't locate it because Apple wanted to give me the choice to enable it once it was already ******* stolen!

    Simply stated that is design. If you want to suggest a change, there is a feedback section elsewhere on this site.
    Barry

  • HT1937 iPhone 5 guarantee outside of the US when purchased in the US

    Hello there, I've bought an iPhone 5 in the US but usually I leave in Israel. After several months (less than a year) I have many technical problems with my iPhone. To whom can I call to repair my iPhone which is still under the 1 year guarantee?

    The warranty is not and has never been international.
    You will have to take the phone back to the US or send it to someone you know there to take it in for service.

  • TS1702 I bought an in app purchase while playing infinity blade app. My credit card has been charged but I can't see the in app purchase being reflected in my infinity blade app. What do I do? help!!!

    please help. How do I get this sorted out? I paid for an in app for infinity blade but the in app is not reflected.

    Click here.

Maybe you are looking for

  • How to delete ALL my iTunes playlists at once?

    Got a problem guys I'm using iTunes 10, and everytime I add an album of music it creates a playlist automatically for the album. I recently added a large directory of music and it automatically created several hundred playlists in my itunes.  I disco

  • What is the Next Step after MCSE

    I need to know what is the Next Step after MCSE massaging ? and what is the top certificate in Microsoft

  • Dblink to SqlServer using more than one user...

    Hi All, I'm in a migration project, SqlServer to Oracle. I'm using the Transparent Gateway to connect from Oracle to SqlServer, using the database link process. When I created the dblink I used the SA (SqlServer sysdba user), and in the future tests

  • Group By Select Top 1 Rows

    Hi Guys, I tried Group By from Select Top 1 Records,  As below the script wasn't work. Please help. SELECT TOP 1 NR.SHGId, NR.Amount FROM NEW_DCB_REPORT NR WHERE NR.SHGId = ND.SHGId AND NR.ShgMemberId = ND.ShgMemberId  AND NR.LoanNumber = ND.LoanNumb

  • Academic Question about Classes Method and Constructor

    Given the similarity between the Constructor class and the Method class, why don't they have a common super class for the methods they have in common that are unique to them?